diff options
| author | Christian Cleberg <[email protected]> | 2025-12-15 19:37:02 -0600 |
|---|---|---|
| committer | Christian Cleberg <[email protected]> | 2025-12-15 19:37:02 -0600 |
| commit | 1f5d27f0fe1ec960d6c02d21dd521b555f9777cd (patch) | |
| tree | 1100c9ebf6db684a0fbdadaf57187f9bbb3aa749 | |
| parent | 5aa7e3a77d87e4ee0defe2502b471945733cb637 (diff) | |
| download | cleberg.net-1f5d27f0fe1ec960d6c02d21dd521b555f9777cd.tar.gz cleberg.net-1f5d27f0fe1ec960d6c02d21dd521b555f9777cd.tar.bz2 cleberg.net-1f5d27f0fe1ec960d6c02d21dd521b555f9777cd.zip | |
remove accidental file
| -rw-r--r-- | content/blog/all_posts.txt | 24644 |
1 files changed, 0 insertions, 24644 deletions
diff --git a/content/blog/all_posts.txt b/content/blog/all_posts.txt deleted file mode 100644 index cc7efb2..0000000 --- a/content/blog/all_posts.txt +++ /dev/null @@ -1,24644 +0,0 @@ -#+date: <2018-11-28 Wed 00:00:00> -#+title: How AES Encryption Works -#+description: Detailed explanation of AES encryption, including key handling, encryption modes, algorithm structure, and implementation considerations for secure data protection. -#+slug: aes-encryption - -* Basic AES - -If you're not familiar with encryption techniques, the Advanced Encryption -Standard ([[https://en.wikipedia.org/wiki/Advanced_Encryption_Standard][AES]]) is a specification for encryption of electronic data. The -National Institute of Standards and Technology established this specification, -sub-selected from the Rijndael family of ciphers (128, 192, and 256 bits) -in 2001. Furthering its popularity and status, the US government chose AES as -their default encryption method for top-secret data, removing the previous -standard which had been in place since 1977. - -AES has proven to be a safe encryption method, with 7-round and 8-round attacks -making no material improvements since the release of this encryption standard -almost two decades ago. - -#+begin_quote -Though many papers have been published on the cryptanalysis of AES, the fastest -single-key attacks on round-reduced AES variants [20, 33] so far are only -slightly more powerful than those proposed 10 years ago [23,24]. - -- [[http://research.microsoft.com/en-us/projects/cryptanalysis/aesbc.pdf][Bogdonav, et al.]] -#+end_quote - -* How Secure is AES? - -In theory, AES-256 (AES using a 256-bit key) is non-crackable due to the massive -number of combinations that can the encryption process can produce. However, -AES-128 is no longer recommended as a viable implementation to protect important -data due the 128-bit key's short length. - -A semi-short [[http://www.moserware.com/2009/09/stick-figure-guide-to-advanced.html][comic strip]] from Moserware quickly explains AES for the public to -understand. Basically, AES encrypts the data by obscuring the relationship -between the data and the encrypted data. Additionally, this method spreads the -message out. Lastly, the key produced by AES is the secret to decrypting it. -Someone may know the method of AES, but without the key, they are powerless. - -To obscure and spread the data out, AES creates a substitution-permutation -network. Wikipedia has a wonderful [[https://upload.wikimedia.org/wikipedia/commons/thumb/c/cd/SubstitutionPermutationNetwork2.png/468px-SubstitutionPermutationNetwork2.png][example of an SP network]] available. This -network sends the data through a set of S boxes (using the unique key) to -substitute the bits with another block of bits. Then, a P box will permutate, or -rearrange, the bits. This is performed numerous times, with the last round -deriving the key. For AES, the key size specifies the number of transformation -rounds: 10, 12, and 14 rounds for 128-bit, 192-bit, and 256-bit keys, -respectively. - -* The Process - -1. *KeyExpansion*: Using [[https://en.m.wikipedia.org/wiki/Advanced_Encryption_Standard][Rijndael's key schedule]], the keys are dynamically - generated. -2. *AddRoundKey*: The process combines each byte of the data with the generated - key(s) using bitwise xor. -3. *SubBytes*: Next, the process substitutes each byte of data. -4. *ShiftRows*: Then, the process shifts the final three rows a specific number - of steps, dictated by the cipher. -5. *MixColumns*: Finally, the process mixes and combines the columns into the - final data for this round of processing. - -This process does not necessarily stop after one full round. Steps 2 through 5 -will repeat for the number of rounds specified by the key. However, the final -round excludes the MixColumns step. As you can see, this is a fairly complex -process. One must have a solid understanding of general mathematic principles to -fully understand how the sequence works (and to even attempt to find a -weakness). - -According to research done by Bogdanov et al., it would take billions of years -to brute force a 126-bit key with current hardware. Additionally, this brute -force attack would require storing 2^{88} bits of data! However, people have -shown different attacks displaying vulnerabilities with the use of this -technology. Side-channel attacks use inadvertent leaks of data from the hardware -or software, which can allow attackers to obtain the key or run programs on a -user's hardware. - -Please note that this is not something you should run out and try to implement -in your =Hello, World!= application after only hours of research. While AES -(basically all encryption methods) is efficient in what it does, it takes a lot -of time and patience to understand. If you're looking for something which -currently implements AES, check out the [[https://www.bouncycastle.org/documentation.html][Legion of the Bouncy Castle]] for Java -implementations of cryptographic algorithms. - -* Why Does Encryption Matter? - -There are limitless reasons to enable encryption at-rest or in-transit for -aspects of your digital life. You can research specific examples, such as -[[https://arstechnica.com/tech-policy/2018/12/australia-passes-new-law-to-thwart-strong-encryption/][Australia passes new law to thwart strong encryption]]. However, I will simply -list basic reasons to always enable encryption, where feasible: - -1. Privacy is a human right and some countries recognize it as a national right - (e.g., [[https://www.law.cornell.edu/wex/fourth_amendment][US Fourth Amendment]]). -2. "Why not?" Encryption rarely affects performance or speed, so there's usually - not a reason to avoid it in the first place. -3. Your digital identity and activity (texts, emails, phone calls, online - accounts, etc.) are valuable and can result in consequences, such as identity - theft, if leaked to other parties. Encrypting this data prevents such leaks - from ruining lives. -4. Wiping or factory-resetting does not actually wipe all data from the storage - device. There are methods to read data from the physical disks/boards inside - devices. -5. Corporations, governments, and other groups or individuals are actively - looking for ways to collect personal information about anyone they can. If - someone's data is not encrypted, that person may become a target due to the - ease of data collection. - -* Read More - -- [[http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.197.pdf][Federal Information Processing Standards Publication 197]] -#+date: <2018-11-28 Wed 00:00:00> -#+title: Inside the C++ Compiler -#+description: Systematic presentation of the C++ compilation phases including preprocessing, compilation, assembly, and linking, with technical insights into each stage's function. -#+slug: cpp-compiler - -* A Brief Introduction - -[[https://en.wikipedia.org/wiki/C%2B%2B][C++]] is a general-purpose programming language with object-oriented, generic, and -functional features in addition to facilities for low-level memory manipulation. - -A developer must compile source code, such as the example shown in the snippet -below, before they can execute the compiled program. There are numerous steps -and intricacies to the compilation process, and this post was a personal -exercise to learn and remember as much information as I can. - -#+begin_src cpp -#include <iostream> - -int main() -{ - std::cout << "Hello, world!\n"; -} -#+end_src - -** Compilation Process - -*** An Overview - -Compiling C++ projects is a frustrating task most days. Seemingly nonexistent -errors keeping your program from successfully compiling can be annoying -(especially since you know you wrote it perfectly the first time, right?). - -I'm learning more and more about C++ these days and decided to write this -concept down so that I can cement it even further in my own head. However, C++ -is not the only compiled language. Check out [[https://en.wikipedia.org/wiki/Compiled_language][the Wikipedia entry for compiled -languages]] for more examples of compiled languages. - -I'll start with a wonderful, graphical way to conceptualize the C++ compiler. -View [[https://web.archive.org/web/20190419035048/http://faculty.cs.niu.edu/~mcmahon/CS241/Notes/compile.html][The C++ Compilation Process]] by Kurt MacMahon, a Northern Illinois -University (NIU) professor, to see the graphic and an explanation. The goal of -the compilation process is to take the C++ code and produce a shared library, -dynamic library, or an executable file. - -** Compilation Phases - -Let's break down the compilation process. There are four major steps to -compiling C++ code. - -*** Step 1 - -The first step is to expand the source code file to meet all dependencies. The -C++ preprocessor includes the code from all the header files, such as =#include -<iostream>=. Now, what does that mean? The previous example includes the -=iostream= header. This tells the computer that you want to use the =iostream= -standard library, which contains classes and functions written in the core -language. This specific header allows you to manipulate input/output streams. -After all this, you'll end up which a temporary file that contains the expanded -source code. - -In the example of the C++ code above, the =iostream= class would be included in -the expanded code. - -*** Step 2 - -After the compiler expands the code, the compiler comes into play. The compiler -takes the C++ code and converts this code into the assembly language, understood -by the platform. You can see this in action if you head over to the [[https://godbolt.org][GodBolt -Compiler Explorer]], which shows the compiled converting C++ into assembly -dynamically. - -For example, the =Hello, world!= code snippet above compiles into the following -assembly code: - -#+begin_src asm -.LC0: - .string "Hello, world!\n" -main: - push rbp - mov rbp, rsp - mov esi, OFFSET FLAT:.LC0 - mov edi, OFFSET FLAT:_ZSt4cout - call std::basic_ostream<char, std::char_traits<char> >& std::operator<< <std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*) - mov eax, 0 - pop rbp - ret -__static_initialization_and_destruction_0(int, int): - push rbp - mov rbp, rsp - sub rsp, 16 - mov DWORD PTR [rbp-4], edi - mov DWORD PTR [rbp-8], esi - cmp DWORD PTR [rbp-4], 1 - jne .L5 - cmp DWORD PTR [rbp-8], 65535 - jne .L5 - mov edi, OFFSET FLAT:_ZStL8__ioinit - call std::ios_base::Init::Init() [complete object constructor] - mov edx, OFFSET FLAT:__dso_handle - mov esi, OFFSET FLAT:_ZStL8__ioinit - mov edi, OFFSET FLAT:_ZNSt8ios_base4InitD1Ev - call __cxa_atexit -.L5: - nop - leave - ret -_GLOBAL__sub_I_main: - push rbp - mov rbp, rsp - mov esi, 65535 - mov edi, 1 - call __static_initialization_and_destruction_0(int, int) - pop rbp - ret -#+end_src - -*** Step 3 - -Third, the compiled assembles the assembly code into the object code for the -platform. Essentially, this is when the compiler takes the assembly code and -assembles it into machine code in a binary format. After researching this -online, I figured out that a lot of compilers will allow you to stop compilation -at this step. This would be useful for compiling each source code file -separately. This saves time later if a single file changes, since the developer -will only need to re-compile single file. - -*** Step 4 - -Finally, the compiler links the object code file generated by the assembler -together with the object code files for any library functions used to produce a -shared library, dynamic library, or an executable file. It replaces all -references to undefined symbols with the correct addresses. -#+date: <2019-01-07 Mon 00:00:00> -#+title: Real‑World CSS Techniques: Flexbox, Shadows, and Variables -#+description: Practical guide on applying CSS rules and constructs such as flexbox, box shadows, and variable usage to achieve standard web styling and layout objectives. -#+slug: useful-css - -* Introduction to CSS - -Cascading Style Sheets ([[https://en.wikipedia.org/wiki/CSS][CSS]]), the language used to mark up HTML code and give it -a visual style, is one of the most effective ways to increase the attractiveness -of a website. It can also lead to increased user engagement, retention, and -satisfaction. In fact, there are whole career fields dedicated to the -improvement of user experiences, known as User Interface (UI) design and User -Experience (UX) design. - -Some web developers are familiar with the common CSS properties, such as element -sizing, fonts, and colors, but are not as well versed in less-used properties -and values such as =flexbox=, =clip-path=, and =transform=. This article will -provide some insight into the less-used and unique CSS properties. - -* CSS Variables - -The first topic today is CSS variables. Variables are not often used by smaller -developers. CSS variables allow you to give your website a well-defined -structure, where you can easily reuse CSS properties throughout the project. - -You can use variables to define things, such as color palettes. Then, you can -use these colors for backgrounds anywhere else in the HTML. You can expand this -and define variables for =primary-text=, =quoted-text=, etc. You can also use -variables to define spacing (e.g. =32px= or =2rem=), which you can then apply to -margins, padding, font sizes, and more. - -For example, here are some variables defined at the root of the website, which -allows for any subsequent CSS rules to use those variables: - -#+begin_src css -:root { - --primary-color: black; - --secondary-color: white; -} - -body { - background-color: var(--primary-color); - color: var(--secondary-color); -} -#+end_src - -* CSS Box Shadows - -Box shadows were once my mortal enemy. No matter how hard I tried, I just -couldn't get them to work how I wanted. Because of this, my favorite discovery -has been CSSMatic's [[https://www.cssmatic.com/box-shadow][box shadow generator]]. It provides a tool to generate box -shadows using their simple sliders. Surprisingly, this is the reason I learned -how box shadows work! You can use the sliders and watch how the CSS code changes -in the image that the tool displays. Through this, you should understand that -the basic structure for box shadows is: - -#+begin_src css -box-shadow: inset horizontal vertical blur spread color; -#+end_src - -Now, let's look at some basic examples! You can copy and paste the following -code into a site like CodePen or your own HTML files. Feel free to play around -with the code, experiment, and learn. - -*Box Shadow #1* - -#+begin_src html -<div class="shadow-examples"> - <div class="box effect1"> - <h3>Effect 1</h3> - </div> -</div> -#+end_src - -#+begin_src css -.box h3 { - text-align: center; - position: relative; - top: 80px; -} -.box { - width: 70%; - height: 200px; - background: #fff; - margin: 40px auto; -} -.effect1 { - box-shadow: 0 10px 6px -6px #777; -} -#+end_src - -*Box Shadow #2* - -#+begin_src html -<div class="shadow-examples"> - <div class="box effect2"> - <h3>Effect 2</h3> - </div> -</div> -#+end_src - -#+begin_src css -.box h3 { - text-align: center; - position: relative; - top: 80px; -} -.box { - width: 70%; - height: 200px; - background: #fff; - margin: 40px auto; -} -.effect2 { - box-shadow: 10px 10px 5px -5px rgba(0, 0, 0, 0.75); -} -#+end_src - -Try these box shadows out on your own and see how changing each shadow value -works. - -* CSS Flex Box - -Now, let's move on to the best part of this article: flex box. The flex box is by -far my favorite new toy. I originally stumbled across this solution after -looking for more efficient ways of centering content horizontally AND -vertically. I had used other methods before, but flex box throws those out the -window. The best part of it all is that flex box is /dead simple/. - -Flex Box pertains to the parent div of any element. You want the parent to be the -flex box and the children's behavior modified by the parent's attributes. It's -easier to see this in action that explained, so let's see an example. - -*Flex Box* - -#+begin_src html -<div class="flex-examples"> - <div class="sm-box"> - <h3>1</h3> - </div> - <div class="sm-box"> - <h3>2</h3> - </div> -</div> -#+end_src - -#+begin_src css -.flex-examples { - display: flex; - flex-wrap: wrap; - justify-content: flex-start; - align-items: center; - padding: 10px; - background-color: #f2f2f2; -} -.sm-box { - display: flex; - justify-content: center; - align-items: center; - width: 20%; - height: 100px; - background: #fff; - margin: 40px 10px; -} -#+end_src - -You may notice that we no longer need to use the =top= property for the =h3= -elements in our code. This is because we set the display box to be a flex -container for the small boxes, AND we made the small boxes flex containers for -their elements (the h3 tags). You can nest flex boxes to center content that is -inside centered content. - -For the example above, we designated the =justify-content= property to be -=flex-start= so that the boxes stack from the left side of the screen. You can -change this property to =center= to make the boxes appear in the center of the -screen. - -For an interactive example, [[https://codepen.io/LandonSchropp/pen/KpzzGo][check out this CodePen]] from [[https://codepen.io/LandonSchropp/][LandonScropp]]. Resize the -window with dice to see how they collapse and re-align. - -* Even More CSS - -For more inspiration, you can visit [[https://www.codepen.io][CodePen]], [[https://dribbble.com][Dribbble]], or [[https://uimovement.com][UI Movement]] to browse -the collections of amazing web designers. -#+date: <2019-09-09 Mon 00:00:00> -#+title: Bringing Data Analytics Into Internal Audit -#+description: Examination of data analytical approaches applied within internal audit functions to improve risk evaluation, process efficiency, and decision support. -#+slug: audit-analytics - -* What Are Data Analytics? - -A quick aside before I dive into this post: =data analytics= is a vague term -that has become popular in recent years. Think of a =data analytic= as the -output of any data analysis you perform. For example, a pivot table or a pie -chart could be a data analytic. - -[[https://en.wikipedia.org/wiki/Data_analysis][Data analysis]] is a process that utilizes statistics and other mathematical -methods to discover useful information within datasets. This involves examining, -cleaning, transforming, and modeling data so that you can use the data to -support an opinion, create more useful viewpoints, and gain knowledge to -implement into audit planning or risk assessments. - -One of the common mistakes that managers (and anyone new to the process) make is -assuming that everything involved with this process is "data analytics". In -fact, data analytics are only a small part of the process. - -See *Figure 1* for a more accurate representation of where data analysis sits -within the full process. This means that data analysis does not include querying -or extracting data, selecting samples, or performing audit tests. These steps -can be necessary for an audit (and the same associates may perform these steps), -but they are not data analytics. - -* Current Use of Analytics in Auditing - -While data analysis has been an integral part of most businesses and departments -for the better part of the last century, only recently have internal audit -functions been adopting this practice. The internal audit function works -exclusively to provide assurance and consulting services to the business areas -within the firm (except for internal auditing firms hired by different companies -to perform their roles). - -#+begin_quote -Internal Auditing helps an organization accomplish its objectives by bringing a -systematic, disciplined approach to evaluate and improve the effectiveness of -risk management, control and governance processes. - -- The IIA's Definition of Internal Audit -#+end_quote - -Part of the blame for the slow adoption of data analysis can be attributed to -the fact that internal auditing is strongly based on tradition and following the -precedents set by previous auditors. However, there can be no progress without -auditors who are willing to break the mold and test new audit techniques. In -fact, as of 2018, [[https://www.cpapracticeadvisor.com/accounting-audit/news/12404086/internal-audit-groups-are-lagging-in-data-analytics][only 63% of internal audit departments currently utilize data -analytics]] in North America. This number should be as close as possible to 100%. -I have never been part of an audit that would not have benefited from data -analytics. - -So, how do internal audit functions remedy this situation? It's definitely not -as easy as walking into work on Monday and telling your Chief Audit Executive -that you're going to start implementing analytics in the next audit. You need a -plan and a system to make the analysis process as effective as possible. - -* The DELTA Model - -One of the easiest ways to experiment with data analytics and gain an -understanding of the processes is to implement them within your own department. -But how do we do this if we've never worked with analysis before? One of the -most common places to start is to research some data analysis models currently -available. For this post, we'll take a look at the DELTA model. You can take a -look at *Figure 2* for a quick overview of the model. - -The DELTA model sets guidelines for areas wanting to implement data analytics so -that the results can be as comprehensive as possible: - -- *Data*: Must be clean, accessible, and (usually) unique. -- *Enterprise-Wide Focus*: Key data systems and analytical resources must be - available for use (by the Internal Audit Function). -- *Leaders*: Must promote a data analytics approach and show the value of - analytical results. -- *Targets*: Must be defined for key areas and risks that the analytics can be - compared against (KPIs). -- *Analysts*: There must be auditors willing and able to perform data analytics - or else the system cannot be sustained. - -* Finding the Proper KPIs - -Once the Internal Audit Function has decided that they want to start using data -analytics internally and have ensured they're properly set up to do so, they -need to figure out what they will be testing against. Key Performance Indicators -(KPIs) are qualitative or quantitative factors that can be evaluated and -assessed to determine if the department is performing well, usually compared to -historical or industry benchmarks. Once KPIs have been agreed upon and set, -auditors can use data analytics to assess and report on these KPIs. This allows -the person performing the analytics the freedom to express opinions on the -results, whereas the results are ambiguous if no KPIs exist. - -Note that tracking KPIs in the department can help ensure you have a rigorous -Quality Assurance and Improvement Program (QAIP) in accordance with some -applicable standards, such as IPPF Standard 1300. - -#+begin_quote -The chief audit executive must develop and maintain a quality assurance and -improvement program that covers all aspects of the internal audit activity. - -- IPPF Standard 1300 -#+end_quote - -Additionally, IPPF Standard 2060 discusses reporting: - -#+begin_quote -The chief audit executive must report periodically to senior management and the -board on the internal audit activity's purpose, authority, responsibility, and -performance relative to its plan and on its conformance with the Code of Ethics -and the Standards. Reporting must also include significant risk and control -issues, including fraud risks, governance issues, and other matters that require -the attention of senior management and/or the board. - -- IPPF Standard 2060 -#+end_quote - -The hardest part of finding KPIs is to determine which KPIs are appropriate for -your department. Since every department is different and has different goals, -KPIs will vary drastically between companies. To give you an idea of where to -look, here are some ideas I came up with when discussing the topic with a few -colleagues. - -- Efficiency/Budgeting: - - Audit hours to staff utilization ratio (annual hours divided by total annual - work hours). - - Audit hours compared to the number of audits completed. - - Time between audit steps or to complete the whole audit. E.g., time from - fieldwork completion to audit report issuance. -- Reputation: - - The frequency that management has requested the services of the IAF. - - Management, audit committee, or external audit satisfaction survey results. - - Education, experience, certifications, tenure, and training of the auditors - on staff. -- Quality: - - Number and frequency of audit findings. Assign monetary or numerical values, - if possible. - - Percentage of recommendations issued and implemented. -- Planning: - - Percentage or number of key risks audited per year or per audit. - - Proportion of audit universe audited per year. - -* Data Analysis Tools - -Finally, to be able to analyze and report on the data analysis, auditors need to -evaluate the tools at their disposal. There are options available, but the most -common ones can easily get the job done. For example, almost every auditor -already has access to Microsoft Excel. Excel is more powerful than most people -give it credit for and can accomplish a lot of basic statistics without much -work. If you don't know a lot about statistics but still want to see some of the -more basic results, Excel is a great option. - -To perform more in-depth statistical analysis or to explore large datasets that -Excel cannot handle, auditors will need to explore other options. The big three -that have had a lot of success in recent years are Python, R, and ACL Analytics -(ACL). You can use ACL as either a graphical tool (point and click) or as a -scripting tool, where the auditor must write the scripts manually. Python and -the R-language are solely scripting languages. - -The general trend in the data analytics environment is that if the tool allows -you to do everything by clicking buttons or dragging elements, you won't be able -to fully utilize the analytics you need. To create the most robust solutions, -you should write the scripts manually. Note that as the utility of a tool -increases, it usually means that the learning curve for that tool will also be -higher. It will take auditors longer to learn how to utilize Python, R, or ACL -versus learning how to utilize Excel. - -* Visualization - -Once an auditor has finally found the right data, KPIs, and tools, they must -report these results so that readers of their results can take action. -Performing in-depth data analysis is only useful if the audience can understand -the results. The best way to create this understanding is to visualize the -results of the data. Let's take a look at some of the best options to visualize -and report the results you've found. - -Some of the most popular commercial tools for visualization are Microsoft -PowerBI and Tableau Desktop. However, other tools exist such as JMP, Plotly, -Qlikview, Alteryx, or D3. Some require commercial licenses while others are -simply free to use. For corporate data, you may want to make sure that the tool -does not communicate any of the data outside the company (such as cloud -storage). I won't be going into depth on any of these tools since visualization -is a subjective and creative experience, but remember to constantly explore new -options as you repeat the process. - -Lastly, let's take a look at an example of data visualization. This example -comes from a [[https://talent.works/2018/03/28/the-science-of-the-job-search-part-iii-61-of-entry-level-jobs-require-3-years-of-experience/][blog post written by Kushal Chakrabarti]] in 2018 about the percent -of entry-level US jobs that require experience. *Figure 3* shows us an -easy-to-digest picture of the data. We can quickly tell that only about 12.5% of -entry-level jobs don't require experience. - -This is the kind of result that easily describes the data for you. However, make -sure to include an explanation of what the results mean. Don't let the reader -assume what the data means, especially if it relates to a complex subject. /Tell -a story/ about the data and why the results matter. - -* Wrap-Up - -While this is not an all-encompassing program that you can just adopt into your -department, it should be enough to get anyone started on the process of -understanding and implementing data analytics. Always remember to continue -learning and exploring new options as your processes grow and evolve. -#+date: <2019-12-03 Tue 00:00:00> -#+title: How the Ansoff Matrix Guides Business Growth -#+description: Analytical description of the Ansoff Matrix, detailing market and product development strategies for measured business expansion and competitive positioning. -#+slug: the-ansoff-matrix - -* Overview - -As the world of business evolves, managers must approach business planning and -strategy with a contemporary mindset. According to Dess, McNamara, Eisner, and -Lee, managers must be willing to adapt to the modern business environment by -going beyond "'incremental management', whereby they view their job as making a -series of small, minor changes to improve the efficiency of the firm's -operations"(2019). - -One reason that strategic management is crucial is because most businesses that -fail in the United States each year fail due to a lack of strategic focus or -direction(2019). The rate of failure for businesses with poor strategies shows -that strategic planning and management are crucial to a business's strength and -longevity, injecting the critical factors of growth and direction into a -company's business plan. - -One of the most significant strategic planning and management frameworks that -companies can use is the [[https://en.wikipedia.org/wiki/Ansoff_matrix][Ansoff Matrix]]. While this framework has unique purposes -and use-cases, it can effectively help an organization grow and compete. -Specifically, the Ansoff matrix is one of the most effective frameworks for -companies who want to focus on increasing sales revenue or profitability(2019). - -This framework uses a two-by-two figure to show the four strategic options for -companies to use in this framework: market penetration, market development, -product development, and diversification (see *Figure 1*). The x-axis of the -matrix focuses on the firm's markets and also determines if the firm is looking -to enter new markets or innovate in its current markets. The y-axis of the -matrix focuses on the firm's products and determines if the firm wants to pursue -strategies around their existing products or explore new products. - -* Strategic Options - -** Market Penetration - -The most straightforward strategy in the Ansoff matrix is to focus on existing -products in existing markets, also known as market penetration(2019). Companies -such as Coca-Cola have used market penetration successfully by investing a lot -of money to get further value out of their current markets. Coca-Cola does this -by introducing new features such as Christmas-themed bottles, personal names on -the bottles, and other marketing schemes. - -** Market Development - -Market development extends existing products into new markets in an attempt to -increase the number of buyers. One interesting way that Coca-Cola used this -strategy comes from the stigma that Diet Coke is a woman's drink(2019). -Coca-Cola introduced Coca-Cola Zero, which contained the same nutritional -content as Diet Coke, but the company packaged it in a dark black can to appear -more "manly" (2019). - -** Product Development - -Product development uses existing markets to introduce new products so that the -firm can better meet customer needs(2019). The extreme end of diversification is -home to companies such as Johnson & Johnson, a healthcare company that has -developed a business portfolio of more than 60,000 different products(2019). -Johnson & Johnson's dedication to continuous diversification has led them to a -balance sheet rating of "AAA", industry recognition for diversification, and -increases in their investor dividends for 57 consecutive years(2019). - -** Related Diversification - -Diversification, the final strategy of the Ansoff Matrix, is more difficult than -the others since it involves exploring both new markets and new products. -Related diversification is a diversification strategy that closely relates to -the firm's core business. Coca-Cola's best example of related diversification is -its acquisition of Glaceau and Vitamin Water, which expanded their drinking -lines of business(2019). - -** Unrelated Diversification - -Unrelated diversification is a diversification strategy that does not really -relate to the firm's core business but still diversifies their business -portfolio. A good example of this would be a coffee company who has decided to -enter the market for bicycle sales. The main purpose of this strategy is to a -diverse company that will not go bankrupt if one market goes through difficult -times. However, this requires a lot of independent skills and heavy investments -since the company most likely cannot easily transfer knowledge between the -markets they compete in. - -* Requirements for Success - -To use the Ansoff Matrix framework, managers need to formulate corporate goals -and objectives. Without goals and direction, management frameworks do not -present much practical utility. Further, the Ansoff Matrix requires the managers -involved to make tactical decisions and create a path for the company to take -toward their goals. Lastly, both the Ansoff Matrix needs to consider both -internal and external perspectives throughout the strategy formulation process. - -One interesting probability is that companies will be using multiple strategic -planning and management frameworks at the same time. While this may sound like -it could crowd the management process, there are numerous reasons to do so. For -example, the Ansoff Matrix and the Balanced Scorecard are popular, and they -cover entirely different parts of a company's strategy. Using the results from -the Balanced Scorecard could inform a company of the potential product and -market demands, such as from customer or supplier survey results, to help the -company determine which Ansoff Matrix strategy to pursue. However, a combined -approach at this level would require mature frameworks and focused managers who -are able to strategize at a high level. - -Lastly, please note that the author of the Ansoff matrix, Igor Ansoff, -often used the term [[https://en.wikipedia.org/wiki/Analysis_paralysis][paralysis by analysis]] to explain the mistake of companies -who overuse analysis and spend too much time planning. Companies need to -understand the utility of a strategic management framework while ensuring that -the company is poised to execute as efficiently as they have planned. -#+date: <2019-12-16 Mon 00:00:00> -#+title: How to Secure Passwords: Best Practices and NIST Guidelines -#+description: Compilation of guidelines for password generation, storage, protection, and compliance with established standards such as NIST for maintaining digital security. -#+slug: password-security - -* Users - -** Why Does It Matter? - -Information security, including passwords and identities, has become one of the -most important digital highlights of the last decade. With [[https://www.usatoday.com/story/money/2018/12/28/data-breaches-2018-billions-hit-growing-number-cyberattacks/2413411002/][billions of people -affected by data breaches each year]], there's a greater need to introduce strong -information security systems. If you think you've been part of a breach, or you -want to check and see, you can use [[https://haveibeenpwned.com/][Have I Been Pwned]] to see if any public -breaches have exposed your email(s). Remember that there's a possibility that a -company experienced a breach and did not report it to anyone. - -** How Do I Protect Myself? - -The first place to start with any personal security check-up is to gather a list -of all the different websites, apps, or programs that require you to have login -credentials. Optionally, once you know where you are storing your information, -you can sort the list from the most-important items such as banks or government -logins to less important items such as your favorite meme site. You will want to -ensure that your critical logins are secure before getting to the others. - -Once you think you have a good idea of all your different authentication -methods, I recommend using a password manager such as [[https://bitwarden.com/][Bitwarden]]. Using a -password manager allows you to automatically save your logins, create randomized -passwords, and transfer passwords across devices. However, you'll need to -memorize your "vault password" that allows you to open the password manager. -It's important to make this something hard to guess since it would allow anyone -who has it to access every password you've stored in there. - -Personally, I recommend using a [[https://en.wikipedia.org/wiki/Passphrase][passphrase]] instead of a [[https://en.wikipedia.org/wiki/Password][password]] for your vault -password. Instead of using a string of characters (whether random or simple), -use a phrase and add in symbols and a number. For example, your vault password -could be =Racing-Alphabet-Gourd-Parrot3=. Swap the symbols out for whichever -symbol you want, move the number around, and fine-tune the pass phrase until you -are confident that you can remember it whenever necessary. - -Once you've stored your passwords, make sure you continually check up on your -account and make sure you aren't following bad password practices. Krebs on -Security has a great [[https://krebsonsecurity.com/password-dos-and-donts/][blog post on password recommendations]]. Any time that a data -breach happens, make sure you check to see if the breach exposed your email, and -if you need to reset any account passwords. - -* Developers - -** What Are the Basic Requirements? - -When developing any password-protected application, there are basic rules that -anyone should follow even if they do not follow any official guidelines such as -NIST. The foremost practice is to require users to use passwords that are at -least 8 characters and bad actors cannot easily guess them. This sounds simple, -but it requires different strategies. First, the application should check the -potential passwords against a dictionary of insecure passwords such =password=, -=1234abc=, or =application_name=. - -Next, the application should offer guidance on the strength of passwords you -enter during enrollment. Further, NIST officially recommends *not* implementing -any composition rules that make passwords hard to remember (e.g. passwords with -letters, numbers, and special characters) and instead encouraging the use of -long pass phrases which can include spaces. Note that to be able to keep spaces -within passwords, you should support all unicode characters, and you should not -truncate spaces. - -** What Does NIST Recommend? - -The National Institute of Standards and Technology ([[https://www.nist.gov][NIST]]) in the US Department -of Commerce regularly publishes information around information security and -digital identity guidelines. Recently, NIST published [[https://pages.nist.gov/800-63-3/sp800-63b.html][Special Publication -800-63b]]: Digital Identity Guidelines and Authentication and Lifecycle -Management. - -#+begin_quote -A Memorized Secret authenticator - commonly referred to as a password or, if -numeric, a PIN - is a secret value intended to be chosen and memorized by the -user. Memorized secrets need to be of sufficient complexity and secrecy that it -would be impractical for an attacker to guess or otherwise discover the correct -secret value. A memorized secret is something you know. - -- NIST Special Publication 800-63B -#+end_quote - -NIST offers a lot of guidance on passwords, but I'm going to highlight just a -few of the important factors: - -- Require passwords to be a minimum of 8 characters (6 characters if randomly - generated and generate using an approved random bit generator). -- Compare potential passwords against a list that contains values known to be - commonly-used, expected, or compromised. -- Offer guidance on password strength, such as a strength meter. -- Implement a rate-limiting mechanism to limit the number of failed - authentication attempts for each user account. -- Do not require composition rules for passwords and do not require users to - change their passwords periodically (unless compromised). -- Allow pasting of user identification and passwords to facilitate the use of - password managers. -- Allow users to view the password as they type. -- Use secure forms of communication and storage, including salting and hashing - passwords using a one-way key derivation function. - -NIST offers further guidance on other devices that require specific security -policies, querying for passwords, and more. All the information discussed so far -comes from [[https://pages.nist.gov/800-63-3/sp800-63b.html][NIST SP800-63b]] but NIST offers a lot of information on digital -identities, enrollment, identity proofing, authentication, lifecycle management, -federation, and assertions in the total [[https://pages.nist.gov/800-63-3/][NIST SP800-63 Digital Identity -Guidelines]]. -#+date: <2020-01-25 Sat 00:00:00> -#+title: Linux Essentials: Top Tools and Easy Setup Tips -#+description: Inventory and description of key Linux applications including graphical and command-line tools, with installation instructions for various distributions. -#+slug: linux-software - -* Graphical Applications - -** Etcher - -[[https://www.balena.io/etcher/][Etcher]] is a quick and easy way to burn an optical disc image (ISO) to a compact -disc (CD) or universal serial bus (USB) device. There are two different ways you -can install this program. First, you can navigate to the [[https://www.balena.io/etcher/][official website]] and -download the AppImage file, which can run without installation. - -However, AppImage files are not executable by default, so you'll either need to -right-click to open the properties of the file and click the "Allow executing -file as program" box in the Permissions tab or use the following command: - -#+begin_src sh -chmod u+x FILE_NAME -#+end_src - -If you don't like AppImage files or just prefer repositories, you can use the -following commands to add the author's repository and install it through the -command-line only. - -First, you'll have to write the repository to a list file: - -#+begin_src sh -echo "deb https://deb.etcher.iostable etcher" | sudo tee /etc/apt/sources.list.d/balena-etcher.list -#+end_src - -Next, add the application keys to Ubuntu's key ring: - -#+begin_src sh -sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 379CE192D401AB61 -#+end_src - -Finally, update the repositories and install the app. - -#+begin_src sh -sudo apt update && sudo apt install balena-etcher-electron -#+end_src - -Using Arch, Manjaro, or another distribution using the Arch User Repository -(AUR)? Use this command instead: - -#+begin_src sh -sudo pacman -S etcher -#+end_src - -** Atom - -[[https://atom.io][Atom]] is the self-proclaimed "hackable text editor for the 21st century". GitHub -develops this editor, [[https://news.microsoft.com/2018/06/04/microsoft-to-acquire-github-for-7-5-billion/][now owned by Microsoft]], and has some of the best add-ons -available to customize the layout and abilities of the app. - -First, add the Atom repository to your sources. - -#+begin_src sh -sudo add-apt-repository ppa:webupd8team/atom -#+end_src - -Next, update your package listings and install atom. - -#+begin_src sh -sudo apt update && sudo apt install atom -#+end_src - -If you have issues updating your packages with the Atom repository, you'll need -to use the snap package described below instead of the repository. To remove the -repository we just added, use this command: - -#+begin_src sh -sudo add-apt-repository -r ppa:webupd8team/atom -#+end_src - -You can also install Atom as a snap package, but you must install it with the -=--classic= flag. A [[https://language-bash.com/blog/how-to-snap-introducing-classic-confinement][full explanation is available]] if you'd like to read more -about why you need the classic flag. - -#+begin_src sh -snap install atom --classic -#+end_src - -Using Arch, Manjaro, or another distro using the AUR? Use this command instead: - -#+begin_src sh -sudo pacman -S atom -#+end_src - -** Visual Studio Code - -[[https://code.visualstudio.com][Visual Studio Code]] (VS Code) is yet another fantastic choice for programming on -Linux, especially if you need those extra add-ons to spice up your late-night -coding sessions. The theme used in the screenshot is [[https://marketplace.visualstudio.com/items?itemName=EliverLara.mars][Mars]] by theme creator -[[https://github.com/EliverLara][Eliver Lara]], who makes a ton of great themes for VS Code, Atom, and Linux -desktop environments. - -To install VS Code, you'll need to download the =.deb= file from the official -website. Once you've downloaded the file, either double-click it to install -through the Software Center or run the following command: - -#+begin_src sh -sudo dpkg -i FILE_NAME.deb -#+end_src - -You can also install VS Code as a snap package, but you must install it with the -=--classic= flag. A [[https://language-bash.com/blog/how-to-snap-introducing-classic-confinement][full explanation is available]] if you'd like to read more -about why you need the classic flag. - -#+begin_src sh -snap install code --classic -#+end_src - -Using Arch, Manjaro, or another distro using the AUR? Use these commands -instead: - -#+begin_src sh -sudo pacman -S yay binutils make gcc pkg-config fakeroot yay -S visual-studio-code-bin -#+end_src - -** GNOME Tweaks - -[[https://gitlab.gnome.org/GNOME/gnome-tweaks][Gnome Tweaks]] is the ultimate tool to use if you want to customize your GNOME -desktop environment. This is how you can switch application themes (GTK), shell -themes, icons, fonts, and more. To install GNOME Tweaks on Ubuntu, you just need -to install the official package. - -#+begin_src sh -sudo apt install gnome-tweaks -#+end_src - -If you've installed Manjaro or Arch with Gnome, you should have the tweak tool -pre-installed. If you're on Fedora, this tool is available as an official -package: - -#+begin_src sh -sudo dnf install gnome-tweaks -#+end_src - -** Steam - -[[https://steampowered.com][Steam]] is one of the most popular gaming libraries for computers and is one of -the main reasons that people have been able to switch to Linux in recent years, -thanks to Steam Proton, which makes it easier to play games not officially -created for Linux platforms. - -To install Steam on Ubuntu, you just need to install the official package. - -#+begin_src sh -sudo apt install steam-installer -#+end_src - -For Arch-based systems, you'll simply need to install the =steam= -package. However, this requires that you enable the =multilib= source. -To do so, use the following command: - -#+begin_src sh -sudo nano /etc/pacman.conf -#+end_src - -Now, scroll down and uncomment the =multilib= section. - -#+begin_src config -# Before: -#[multilib] -#Include = /etc/pacman.d/mirrorlist - -# After: -[multilib] -Include = /etc/pacman.d/mirrorlist -#+end_src - -Finally, install the program: - -#+begin_src sh -sudo pacman -S steam -#+end_src - -[[./2020-01-26-steam-on-ntfs-drives.html][Problem Launching Steam Games? Click Here.]] - -* Command-Line Packages - -** neofetch - -[[https://github.com/dylanaraps/neofetch][Neofetch]] is a customizable tool used in the command-line to show system -information. This is exceptionally useful if you want to see your system's -information quickly without the clutter of some resource-heavy GUI apps. - -This is an official package if you're running Ubuntu 17.04 or later, so simply -use the following command: - -#+begin_src sh -sudo apt install neofetch -#+end_src - -If you're running Ubuntu 16.10 or earlier, you'll have to use a series of -commands: - -#+begin_src sh -sudo add-apt-repository ppa:dawidd0811/neofetch; sudo apt update; sudo apt -install neofetch -#+end_src - -Using Arch, Manjaro, or another distro using the AUR? Use this command instead: - -#+begin_src sh -sudo pacman -S neofetch -#+end_src - -** yt-dlp - -[[https://github.com/yt-dlp/yt-dlp][yt-dlp]] is a handy command-line tool that allows you to download video or audio -files from websites, such as YouTube. There are a ton of different options when -running this package, so be sure to run =yt-dlp --help= first to look through -everything you can do (or give up and search for the best configuration online). - -While this shouldn't be a problem for most users, yt-dlp requires Python 2.6, -2.7, or 3.2+ to work correctly, so install Python if you don't have it already. -You can check to see if you have Python installed by running: - -#+begin_src sh -python -V -#+end_src - -To get the youtube-dl package, simply curl the URL and output the results. - -#+begin_src sh -sudo curl -L https://github.com/yt-dlp/yt-dlp/releases/latest/download/yt-dlp -o -/usr/local/bin/yt-dlp -#+end_src - -Finally, make the file executable so that you can run it from the command-line. - -#+begin_src sh -sudo chmod a+rx /usr/local/bin/yt-dlp -#+end_src -#+date: <2020-01-26 Sun 00:00:00> -#+title: How to Get Steam Running Smoothly on NTFS Drives in Linux -#+description: Procedures for mounting NTFS drives using ntfs-3g to enable reliable execution of Steam gaming software on Linux environments. -#+slug: steam-on-ntfs - -* Auto-Mount Steam Drives - -If you want to see how to install Steam on Linux, see my other post: [[../linux-software/][Linux -Software]]. - -Are you having trouble launching games, even though they've installed correctly? -This may happen if you're storing your games on an NT File System -(NTFS)-formatted drive. This shouldn't be an issue if you're storing your games -on the same drive that Steam is on, but some gamers prefer to put Steam on their -main drive and game files on another solid state drive (SSD) or hard disk drive -(HDD). - -To fix this problem, you'll need to try two things. First, you'll need to -install the =ntfs-3g= package, which allows for better interoperability with -Linux. - -#+begin_src sh -sudo apt install ntfs-3g -#+end_src - -Next, you should set up the =/etc/fstab= file to automatically mount your drives -on boot. To automatically mount your drives when the computer boots up, you'll -have to create the folders you want to mount your drive to first. I store mine -in the =/mnt= folder using names that I'll recognize, but you can create your -folders wherever you want. - -#+begin_src sh -mkdir /path/to/folder -#+end_src - -For example: - -#+begin_src sh -mkdir /mnt/steam_library -#+end_src - -To automatically mount drives upon system boot, you will need to collect five -items. The universally unique identifier (UUID) is the identification number -connected to whichever drive you're using to store Steam games. - -Drives are usually labeled similar to =/dev/nvme0n1p1= or =/dev/sda1=, so you'll -need to find the line in the output of the command below that correlates to your -drive and copy the UUID over to the =/etc/fstab= file. - -#+begin_src sh -sudo blkid | grep UUID= -#+end_src - -Next, you'll need your user identified (=uid=) and group identifier (=gid=). To -find these, run the following command: - -#+begin_src sh -id -u && id -g -#+end_src - -Now that you have collected the necessary information, open the =/etc/fstab= -file: - -#+begin_src sh -sudo nano /etc/fstab -#+end_src - -Each drive you want to mount on boot should have its own line in the -=/etc/fstab= file that looks similar to this: - -#+begin_src config -UUID=B64E53824E5339F7 /mnt/steam_library ntfs-3g uid=1000,gid=1000 0 0 -#+end_src - -#+begin_src sh -sudo umount /dev/sdxX -#+end_src - -Now all you need to do is unmount your drive and re-mount it. You can unmount -the drive by doing this (be sure to use the correct drive name here): - -You can re-mount all your drives by executing the following: - -#+begin_src sh -sudo mount -a -#+end_src - -If you don't know what your drive name is, or you're nervous about unmounting -and re-mounting, simply reboot your computer, and the system will mount the -drive for you automatically. -#+date: <2020-02-09 Sunday 00:00:00> -#+title: A Practical Guide to Encryption, Keys, and Secure Communication -#+description: Systematic overview of encryption methodologies, key categories, algorithmic frameworks, and their applications in data confidentiality and integrity. -#+slug: cryptography - -* Similar Article Available - -If you haven't already, feel free to read my post on [[../aes-encryption/][AES Encryption]]. - -* What is Cryptography? - -In layman's terms, cryptography is a process that can change data from a -readable format into an unreadable format (and vice-versa) through a series of -processes and secrets. More technically, this is the Internet Security -Glossary's definition: - -#+begin_quote -[Cryptography is] the mathematical science that deals with transforming data to -render its meaning unintelligible (i.e., to hide its semantic content), prevent -its undetected alteration, or prevent its unauthorized use. If the -transformation is reversible, cryptography also deals with restoring encrypted -data to an intelligible form. - -- [[https://tools.ietf.org/html/rfc2828][Internet Security Glossary (2000)]] -#+end_quote - -Cryptography cannot offer protection against the loss of data; it simply offers -encryption methods to protect data at-rest and data in-traffic. At a high-level, -encrypted is when plain text data is encrypted to cipher text (a secure form of -text that cannot be understood unless decrypted back to plain text). The -encryption process is completed through the use of a mathematical function that -utilizes one or more values called keys to encrypt or decrypt the data. - -* Key Elements of Cryptographic Systems - -To create or evaluate a cryptographic system, you need to know the essential -pieces to the system: - -- *Encryption Algorithm (Primitive):* A mathematical process that encrypts and - decrypts data. -- *Encryption Key:* A string of bits used within the encryption algorithm as the - secret that allows successful encryption or decryption of data. -- *Key Length (Size):* The maximum number of bits within the encryption key. - It's important to remember that key size is regulated in certain countries. -- *Message Digest:* A smaller, fixed-size bit string version of the original - message. This is practically infeasible to reverse, which is why it's commonly - used to verify integrity. - -* Symmetric Systems (Secret Key Cryptography) - -Symmetric cryptography utilizes a secret, bidirectional key to perform both -encryption and decryption of the data. The most common implementation of -symmetric cryptography is the Advanced Encryption Standard, which uses keys that -are 128 bits to 256 bits in size. This standard came after the National -Institute of Standards and Technology (NIST) decided to retire the Data -Encryption Standard (DES) in 2001. - -Since brute force attacks strongly correlate with key length, the 56-bit key -length of DES was considered insecure after it was publicly broken in under 24 -hours. However, there is a modern implementation of DES called Triple DES where -the DES method is applied three times to each data block. - -The main advantages to symmetric systems are the ease of use, since only one key -is required for both encryption and decryption, and the simplicity of the -algorithms. This helps with bulk data encryption that may unnecessarily waste -time and power using asymmetric systems. - -However, symmetric systems have disadvantages to keep in mind. Since the key is -private, it can be difficult to safely distribute keys to communication -partners. Additionally, the key cannot be used to sign messages since it's -necessary to keep the key private. - -* Asymmetric Systems (Public Key Cryptography) - -Asymmetric cryptography utilizes two keys within the system: a secret key that -is privately-held and a public key that can be distributed freely. The -interesting aspect of asymmetric cryptography is that either key can be used to -encrypt the data, there's no rule that dictates which key must be used for -encryption. Once one key is used to encrypt the data, only the other key can be -used to decrypt the data. This means that if the private key encrypts the data, -only the public key can decrypt the data. - -An advantage of this system is that if you successfully decrypt data using one -of the keys, you can be sure of the sender since only the other key could have -encrypted the data. - -One of the major implementations of an asymmetric system is a digital signature. -A digital signature can be generated using the sender's private key, or a -one-way hash function and is used to provide assurance for the integrity and -authenticity of the message. A couple common message digest algorithms are -SHA-256 and SHA-512, which securely compress data and produce a 128-bit message -digest. - -It should be noted that man-in-the-middle attacks are one of the risks with -digital signatures and public keys. To combat this, applications often use a -public key infrastructure (PKI) to independently authenticate the validity of -signatures and keys. - -Due to the large key size and [[https://crypto.stackexchange.com/a/591][inefficient mathematical functions]] of asymmetric -encryption, elliptical curve cryptography (ECC) is often used to increase -security while using fewer resources. - -* Applications of Cryptographic Systems - -There are numerous implementations of cryptographic systems around the world. -Here are six popular examples: - -*Transport Layer Security (TLS):* One of the most famous cryptographic solutions -created is TLS, a session-layered or connection-layered internet protocol that -allows for secure communications between browsers and servers. Using handshakes, -peer negotiation, and authentication allows TLS to prevent eavesdropping and -malicious transformation of data. The major reason for TLS popularity is that a -major vulnerability was found in the SSL protocol in 2014. Instead of SSL, TLS -can be used with HTTP to form HTTPS and is the preferred method for modern web -development due to its increased security. - -*Secure Hypertext Transfer Protocol (HTTPS):* An application layer protocol that -allows for secure transport of data between servers and web clients. One of the -unique parts of HTTPS is that it uses a secured port number instead of the -default web port address. - -*Virtual Private Network (VPN):* VPNs are made to securely extend a private -network across public networks by utilizing an encrypted layered tunneling -protocol paired with an authentication method, such as usernames and passwords. -This technology originally allowed remote employees to access their company's -data but have evolved into one of the top choices for anyone who wishes to mask -their sensitive personal data. - -*Internet Protocol Security (IPSec):* This protocol suite facilitates -communication between two or more hosts or subnets by authenticating and -encrypting the data packets. IPSec is used in a lot of VPNs to establish the VPN -connection through the transport and tunnel mode encryption methods. IPSec -encrypts just the data portion of packets in the transport methods, but it -encrypts both the data and headers in the tunnel method (introducing an -additional header for authentication). - -*Secure Shell (SSH):* SSH is another network protocol used to protect network -services by authenticating users through a secure channel. This protocol is -often used for command-line (shell) functions such as remote shell commands, -logins, and file transfers. - -*Kerberos:* Developed by MIT, Kerberos is a computer-network authentication -protocol that works on the basis of tickets to allow nodes communicating over a -non-secure network to prove their identity to one another securely. This is most -commonly used in business environments when used as the authentication and -encryption method for Windows Active Directory (AD). - -* Cybersecurity Controls - -If you're someone who needs solutions on how to control risks associated with -utilizing a crytograhpic system, start with these basic controls: - -- *Policies:* A policy on the use of cryptographic controls for protection of - information is implemented and is in accordance with organizational - objectives. -- *Key management:* A policy on the use, protection and lifetime of - cryptographic keys is implemented through the entire application lifecycle. -- *Key size:* The organization has researched the optimal key size for their - purposes, considering national laws, required processing power, and longevity - of the solution. -- *Algorithm selection:* Implemented algorithms are sufficiently appropriate for - the business of the organization, robust, and align with recommended - guidelines. -- *Protocol configuration:* Protocols have been reviewed and configured suitable - to the purpose of the business. -#+date: <2020-03-25 Wed 00:00:00> -#+title: Session Messenger: Is It Secure? -#+description: Technical description of the Session messaging protocol, including end-to-end encryption, metadata minimization, multi-device synchronization, and privacy-centric design. -#+slug: session-messenger - -* Privacy Warning - -The company behind Session (Loki Foundation) is from Australia. If you didn't -know, Australia has introduced [[https://parlinfo.aph.gov.au/parlInfo/download/legislation/bills/r6195_aspassed/toc_pdf/18204b01.pdf][legislation]] mandating companies comply with -government requests to build back door access into applications. For more -information, read my article on [[./2020-01-25-aes-encryption.html][AES Encryption]]. - -* About Session - -[[https://getsession.org][Session]] is a private, cross-platform messaging app from the [[https://loki.foundation][Loki Foundation]]. As -someone who has spent years looking for quality alternatives to major messaging -apps, I was excited when I first heard about Session. Reading through [[https://arxiv.org/pdf/2002.04609.pdf][Session's -white paper]], you can learn the technologies behind the Session app. Part of the -security of Session comes from the Signal protocol, which was forked as the -origin of Session. - -#+begin_quote -Session is an end-to-end encrypted messenger that removes sensitive metadata -collection, and is designed for people who want privacy and freedom from any -forms of surveillance. -#+end_quote - -In general, this app promises security through end-to-end encryption, -decentralized onion routing, and private identities. The biggest change that the -Loki Foundation has made to the Signal protocol is removing the need for a phone -number. Instead, a random identification string is generated for any session you -create. This means you can create a new session for each device if you want to, -or link new devices with your ID. - -Since Session's website and white paper describe the details of Session's -security, I'm going to focus on using the app in this post. - -* Features - -Since most people are looking for an alternative to a popular chat app, I am -going to list out the features that Session has so that you are able to -determine if the app would suit your needs: - -- Multiple device linking [via a quick-response (QR) code or identifier (ID)] -- App locking via device screen lock, password, or fingerprint -- Screenshot blocking -- Incognito keyboard -- Read receipts and typing indicators -- Mobile notification customization -- Old message deletion and conversation limit -- Backups -- Recovery phrase -- Account deletion, including ID, messages, sessions, and contacts - -* Downloads - -I have tested this app on Ubuntu 19.10, Android 10, macOS Monterey, and iOS 15. -All apps have worked well without issue. - -Below is a brief overview of the Session app on Linux. To get this app, you'll -need to go to the [[https://getsession.org/download/][Downloads]] page and click to link to the operating system -you're using. - -For Linux, it will download an AppImage that you'll need to enable with the -following command: - -#+begin_src sh -sudo chmod u+x session-messenger-desktop-linux-x86_64-1.0.5.AppImage -#+end_src - -* Creating an Account - -Once you've installed the app, simply run the app and create your unique Session -ID. It will look something like this: -=05af1835afdd63c947b47705867501d6373f486aa1ae05b1f2f3fcd24570eba608=. - -You'll need to set a display name and, optionally, a password. If you set a -password, you will need to enter it every time you open the app. - -* Start Messaging - -Once you've created your account and set up your profile details, the next step -is to start messaging other people. To do so, you'll need to share your Session -ID with other people. From this point, it's straightforward and acts like any -other messaging app, so I won't dive into much detail here. - -** macOS - -One key feature to note is that the desktop application now provides a helpful -pop-up box explaining the process that Session uses to hide your IP address: - -** iOS - -The mobile app is simple and effective, giving you all the standard mobile -messaging options you'd expect. - -* Potential Issues - -I've discovered one annoying issue that would prevent from using this app -regularly. On a mobile device, there have been issues with receiving messages on -time. Even with battery optimization disabled and no network restrictions, -Session notifications sometimes do not display until I open the app or the -conversation itself and wait. This is actually one of the reasons I stopped -using Signal (this seems fixed as of my updates in 2021/2022, so I wouldn't -worry about this issue anymore). - -Looking for another messenger instead of Session? I recommend Signal, Matrix, -and internet relay chat (IRC). -#+date: <2020-05-03 Sun 00:00:00> -#+title: My Homelab Setup: Gear, Network, and Lessons Learned -#+description: Comprehensive instructions on assembling and configuring a homelab environment, emphasizing hardware selection, software deployment, and network setup for operational efficiency. -#+slug: homelab - -* What is a Homelab? - -Starting as a developer, I have stayed away from hardware-based hobbies (other -than building a gaming desktop). However, as the quarantine for COVID-19 -stretches out further and further, I found myself bored and in search of new -hobbies. After spending the last few months browsing the [[https://www.reddit.com/r/homelab/][r/homelab]] subreddit, I -decided it was time to jump in and try things out for myself. - -Since I am a beginner and just recently graduated from college, everything I've -done so far in my homelab is low-budget. - -* Hardware - -** Raspberry Pi 4 - -Luckily, I had actually purchased a [[https://www.raspberrypi.org/products/raspberry-pi-4-model-b/][Raspberry Pi 4]] before the quarantine started -so that I could try to keep Plex Media Center running, even while my desktop -computer was turned off. I started here, using the Pi to hold Plex and Pi-hole -until I grew tired with the slow performance. - -Here are the specifications for the Pi 4: - -- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz -- 4GB LPDDR4-3200 SDRAM -- Gigabit Ethernet -- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode) -- 64 GB MicroSD Card - -** Dell Optiplex 5040 - -Since I wasn't happy with the Pi as my main server, I turned to Craigslist. I -know a lot of other homelabbers use Ebay, but I can't seem to ever trust it -enough to purchase items on there. So I used Craigslist and found a Dell -Optiplex 5040 desktop computer on sale for $90. While this computer might be -underpowered, it was one of the few computers under $100 that was available -during quarantine. - -Here are the specifications for the Dell Optiplex 5040: - -- Intel Core i3 6100 -- 8GB RAM DDR3 -- Intel HD Graphics -- Gigabit Ethernet -- 500GB Hard Drive - -While this hardware would be awful for a work computer or a gaming rig, it -turned out to be wonderful for my server purposes. The only limitation I have -found so far is the central processing unit (CPU). The i3-6100 only has enough -power for a single 4k video transcode at a time. I haven't tested more than -three 1080p streams at a time, but the maximum amount of streams I've ever -actually used is two. - -** WD easystore 10TB & 8TB - -Application storage and temporary files are stored on the internal hard drive of -the server, but all media files (movies, television, games, books, etc) are stored -externally on my WD easystore hard drive. Creating auto-boot configurations in -the =/etc/fstab= file on my server allows the hard drives to automatically mount -whenever I need to restart my server. - -#+begin_quote -Update: In March 2022, I shucked the hard drives out of their external cases, -put some Kapton tape on the third power pin to prevent power shutdowns, and -stuck them inside my server tower using internal Serial AT Attachment (SATA) -cables. -#+end_quote - -** Netgear Unmanaged Switch - -To manage all the ethernet cords used by my homelab, my desktop, and my living -room media center, I purchased an 8-port gigabit ethernet switch for $50 at my -local computer store. This is probably much more than I should have spent on an -unmanaged switch, but I am comfortable with the choice. - -** TP-Link Managed Switch - -Since I use the unmanaged switch to group all living room devices together, I -use the managed switch to configure virtual local area networks (VLANs) and -secure my network. - -** Arris TM1602A Modem & Sagecom Fast 5280 Router - -My default modem and router, provided by my ISP, are fairly standard. The Arris -modem supports DOCSIS 3.0, which is something that I definitely wanted as a -minimum. The Sagecom router is also standard, no fancy bells or whistles. -However, it does support the dynamic host configuration protocol (DHCP) for -internet protocol version 4 (IPv4) and internet protocol version 6 (IPv6), which -is something iyou can use to route all household traffic through a pi-hole or -firewall. - -** TP-Link EAP - -In order to gain better control over the network, I use my own wireless access -point instead of the one included in the Sagecom router above. Now I can control -and organize all of my ethernet connections through the VLANs on the managed -switch and wireless connections through the VLANS on the EAP. - -** Generic Printer - -The last piece to my homelab is a standard wireless printer. Nothing special -here. - -* Software - -** Ubuntu Server 20.04 - -While the 20.04 version of Ubuntu was just released, I always like to experiment -with new features (and I don't mind breaking my system - it just gives me more -experience learning how to fix things). So, I have Ubuntu Server 20.04 installed -on the Dell Optiplex server and Ubuntu Server 19.10 installed on the Raspberry -Pi. Once I find an acceptable use for the Pi, I will most likely switch the -operating system. - -** Docker - -I am /very/ new to Docker, but I have had a lot of fun playing with it so far. -Docker is used to create containers that can hold all the contents of a system -without interfering with other software on the same system. So far, I have -successfully installed pi-hole, GitLab, Gogs, and Nextcloud in containers. -However, I opted to delete all of those so that I can reconfigure them more -professionally at a later time. - -** Plex Media Server - -Plex is a media center software that allows you to organize your movies, TV -shows, music, photos, and videos automatically. It will even download metadata -for you so that you can easily browse these collections. - -** Pi-hole - -Pi-hole is an alternative ad-blocker that runs at the DNS level, allowing you to -block traffic when it hits your network, so that you can reject any traffic you -deem to be bad. Pi-hole uses blacklists and whitelists to decide which traffic -block and, luckily, there are a lot of pre-made lists out there on Reddit, -GitHub, etc. - -** Nextcloud - -While I had trouble with the Docker version of Nextcloud, I was very successful -when setting up the snap version. Using this, I was able to map Nextcloud to a -subdomain of a domain I own in Namecheap. Additionally, Nextcloud has an -integration with Let's Encrypt that allows me to issue certificates -automatically to any new domain I authorize. - -** Webmin - -To monitor my servers, and the processes running on them, I use the Webmin -dashboard. This was fairly painless to set up, and I currently access it -straight through the server's IP address. In the future, I will be looking to -configure Webmin to use a custom domain just like Nextcloud. -#+date: <2020-05-19 Tue 00:00:00> -#+title: Tweak Your Ubuntu Look: A Beginner’s Guide to GNOME Customization -#+description: Detailed instructions for modifying system appearance and interface elements in Ubuntu 20.04, including setting themes, icon packs, font adjustments, terminal configurations, and related customization parameters. -#+slug: customizing-ubuntu - -* More Information - -For inspiration on designing your *nix computer, check out the [[https://libredd.it/r/unixporn][r/unixporn]] -subreddit! - -* Customizing Ubuntu - -New to Linux and want to add a personal touch to your machine? One of the best -perks of Linux is that it is *extremely* customizable. You can change the styles -of the windows, shell (status bars/docks), icons, fonts, terminals, and more. - -In this post, I'm going to go through customization on Ubuntu 20.04 (GNOME) -since most new users tend to choose Ubuntu-based distros. If you've found a way -to install Arch with i3-gaps, I'm assuming you know how to find more advanced -tutorials out there on customizations. - -** Required Tools - -Ubuntu 20.04 ships with the default desktop environment [[https://www.gnome.org/][Gnome]], which includes -the handy =gnome-tweaks= tool to quickly change designs. To install this, just -open your terminal and enter the following command: - -#+begin_src sh -sudo apt install gnome-tweaks -#+end_src - -After you've finished installing the tool, simply launch the Tweaks application, -and you'll be able to access the various customization options available by -default on Ubuntu. You might even like some of the pre-installed options. - -** GNOME Application Themes - -To change the themes applied to applications in GNOME, you will need to change -the Applications drop-down in the Appearance section of Tweaks. To add more -themes, you will have to find your preferred theme online and follow the steps -below to have it show up in the Tweaks tool. While you may find themes anywhere, -one of the most popular sites for GNOME themes is [[https://www.gnome-look.org/][gnome-look.org]]. This website -contains themes for applications, shells, icons, and cursors. - -Steps to import themes into Tweaks: - -1. Download the theme. -2. These files are usually compressed (.zip, .tar.gz, .tar.xz), so you will need - to extract the contents. This is easiest when opening the file explorer, - right-clicking the compressed file, and choosing "Extract here." -3. Move the theme folder to =/usr/share/themes/=. You can do so with the - following command: =sudo mv theme-folder/ /usr/share/themes/=. - - Icons and cursors will be moved to the =/usr/share/icons/= folder. - - Fonts will be moved to the =/usr/share/fonts/= folder Alternatively, you - can move them to the =/usr/share/fonts/opentype/= or - =/usr/share/fonts/opentype/= folders, if you have a specific font type. -4. Close tweaks if it is open. Re-open Tweaks and your new theme will be - available in the Applications drop-down in the Appearance section of Tweaks. - -If the theme is not showing up after you've moved it into the themes folder, you -may have uncompressed the folder into a sub-folder. You can check this by -entering the theme folder and listing the contents: - -#+begin_src sh -cd /usr/share/themes/Mojave-Dark && ls -la -#+end_src - -This is an example of what the contents of your theme folder should look like. -If you just see another folder there, you should move that folder up into the -=/usr/share/themes/= folder. - -#+begin_src sh -cinnamon COPYING gnome-shell gtk-2.0 gtk-3.0 index.theme metacity-1 plank xfwm4 -#+end_src - -** GNOME Shell Themes - -To change the appearance of the title bar, default dock, app menu, and other -parts of the GNOME shell, you'll need to install the [[https://extensions.gnome.org/extension/19/user-themes/][user themes]] extension on -[[https://extensions.gnome.org/][Gnome Extensions]]. To be able to install extensions, you will first need to -install the browser extension that the website instructs you to. See this -screenshot for the blue box with a link to the extension. - -After the browser extension is installed, you will need to install the native -host connector: - -#+begin_src sh -sudo apt install chrome-gnome-shell -#+end_src - -Finally, you can go the [[https://extensions.gnome.org/extension/19/user-themes/][user themes]] extension page and click the installation -button. This will enable the Shell option in Tweaks. Now you can move shell -themes to the =/usr/share/themes= directory, using the same steps mentioned in -the previous section, and enable the new theme in Tweaks. - -** Icons & Cursors - -Icons and cursors are installed exactly the same way, so I'm grouping these -together in this post. Both of these items will need to follow the same process -as installing themes, except you will want to move your font folders to the -=/usr/share/icons/= directory instead. - -** Fonts - -Fonts are one of the overlooked parts of customization, but a good font can make -the whole screen look different. For example, I have installed the [[https://github.com/IBM/plex/releases][IBM Plex]] -fonts on my system. This follows the same process as installing themes, except -you will want to move your font folders to the =/usr/share/fonts/= directory -instead. - -** Terminal - -If you spend a lot of time typing commands, you know how important the style and -functionality of the terminal is. After spending a lot of time using the default -GNOME terminal with [[https://en.wikipedia.org/wiki/Bash_(Unix_shell)][unix shell]], I decided to try some different options. I ended -up choosing [[https://terminator-gtk3.readthedocs.io/en/latest/][Terminator]] with [[https://en.wikipedia.org/wiki/Z_shell][zsh]] (Z Shell). - -Terminator is great if you need to open multiple terminals at one time by simply -right-clicking and splitting the screen into as many terminals as you want. -While this project hasn't been updated in a while, [[https://github.com/gnome-terminator/terminator/issues/1][it is coming under new -development]]. However, this terminal is great and I haven't experienced any -errors yet. - -For the shell choice, I decided to choose zsh after trying it out on a fresh -Manjaro installation. Zsh is great if you like to change the themes of your -terminal, include icons, or add plugins. - -The desktop uses the [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]] to suggest past commands as you type. -In addition, it suggests corrections if you misspell a command. Lastly, it uses -the =af-magic= theme, which adds dashed lines between commands, moving the -user@host tag to the right side of the terminal, and changes the colors. There -are plenty of plugins and themes to choose from. Just figure out what you like -and add it to your =~/.zshrc= file! - -*** Steps to Replicate My Terminal - -To install zsh on Ubuntu, enter the following command into a terminal: - -#+begin_src sh -sudo apt install zsh -#+end_src - -Then, enter the next command to activate zsh: - -#+begin_src sh -sudo chsh -s $(which zsh) $(whoami) -#+end_src - -To install Terminator on Ubuntu: - -#+begin_src sh -sudo apt install terminator -#+end_src - -To install Oh My Zsh on Ubuntu: - -#+begin_src sh -sh -c "$(curl -fsSL -https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh)" -#+end_src - -To install zsh-autosuggestions via Oh My Zsh: - -#+begin_src sh -git clone https://github.com/zsh-users/zsh-autosuggestions -${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions -#+end_src - -Then, add the following plugin wording to your =~/.zshrc= file (the default -config usually has the =git= plugin activated, so just add any other plugins to -the parentheses separated by a space): - -#+begin_src sh -nano ~/.zshrc -#+end_src - -#+begin_src sh -plugins=(git zsh-autosuggestions) -#+end_src - -Finally, you need to log out of your computer and log back in so your user shell -can refresh. -#+date: <2020-07-20 Mon 00:00:00> -#+title: A Data-Driven Look at Video Game Sales (1980–2020) -#+description: Presentation of analyzed data regarding global video game sales, covering platform distributions, genre classifications, and geographic market performance metrics. -#+slug: video-game-sales - -* Background Information - -This dataset (obtained from [[https://www.kaggle.com/gregorut/videogamesales/data][Kaggle]]) contains a list of video games with sales -greater than 100,000 copies. It was generated by a scrape of vgchartz.com. - -Fields include: - -- Rank: Ranking of overall sales -- Name: The game name -- Platform: Platform of the game release (i.e. PC,PS4, etc.) -- Year: Year of the game's release -- Genre: Genre of the game -- Publisher: Publisher of the game -- NA_{Sales}: Sales in North America (in millions) -- EU_{Sales}: Sales in Europe (in millions) -- JP_{Sales}: Sales in Japan (in millions) -- Other_{Sales}: Sales in the rest of the world (in millions) -- Global_{Sales}: Total worldwide sales. - -There are 16,598 records. 2 records were dropped due to incomplete information. - -* Import the Data - -#+begin_src python -# Import the Python libraries we will be using -import pandas as pd -import numpy as np -import seaborn as sns; sns.set() -import matplotlib.pyplot as plt - -# Load the file using the path to the downloaded file -file = r'video_game_sales.csv' -df = pd.read_csv(file) -df -#+end_src - -* Explore the Data - -#+begin_src python -# With the description function, we can see the basic stats. For example, we can -# also see that the 'Year' column has some incomplete values. -df.describe() -#+end_src - -#+begin_src python -# This function shows the rows and columns of NaN values. For example, df[179,3] = nan -np.where(pd.isnull(df)) - -(array([179, ..., 16553], dtype=int64), - array([3, ..., 5], dtype=int64)) -#+end_src - -* Visualize the Data - -#+begin_src python -# This function plots the global sales by platform -sns.catplot(x='Platform', y='Global_Sales', data=df, jitter=False).set_xticklabels(rotation=90) -#+end_src - -#+begin_src python -# This function plots the global sales by genre -sns.catplot(x='Genre', y='Global_Sales', data=df, jitter=False).set_xticklabels(rotation=45) -#+end_src - -#+begin_src python -# This function plots the global sales by year -sns.lmplot(x='Year', y='Global_Sales', data=df).set_xticklabels(rotation=45) -#+end_src - -#+begin_src python -# This function plots four different lines to show sales from different regions. -# The global sales plot line is commented-out, but can be included for comparison -df2 = df.groupby('Year').sum() -years = range(1980,2019) - -a = df2['NA_Sales'] -b = df2['EU_Sales'] -c = df2['JP_Sales'] -d = df2['Other_Sales'] -# e = df2['Global_Sales'] - -fig, ax = plt.subplots(figsize=(12,12)) -ax.set_ylabel('Region Sales (in Millions)') -ax.set_xlabel('Year') - -ax.plot(years, a, label='NA_Sales') -ax.plot(years, b, label='EU_Sales') -ax.plot(years, c, label='JP_Sales') -ax.plot(years, d, label='Other_Sales') -# ax.plot(years, e, label='Global_Sales') - -ax.legend() -plt.show() -#+end_src - -** Investigate Outliers - -#+begin_src python -# Find the game with the highest sales in North America -df.loc[df['NA_Sales'].idxmax()] - -Rank 1 -Name Wii Sports -Platform Wii -Year 2006 -Genre Sports -Publisher Nintendo -NA_Sales 41.49 -EU_Sales 29.02 -JP_Sales 3.77 -Other_Sales 8.46 -Global_Sales 82.74 -Name: 0, dtype: object - -# Explore statistics in the year 2006 (highest selling year) -df3 = df[(df['Year'] == 2006)] -df3.describe() -#+end_src - -#+begin_src python -# Plot the results of the previous dataframe (games from 2006) - we can see the year's results were largely carried by Wii Sports -sns.catplot(x="Genre", y="Global_Sales", data=df3, jitter=False).set_xticklabels(rotation=45) -#+end_src - -#+begin_src python -# We can see 4 outliers in the graph above, so let's get the top 5 games from that dataframe -# The results below show that Nintendo had all top 5 games (3 on the Wii and 2 on the DS) -df3.sort_values(by=['Global_Sales'], ascending=False).head(5) -#+end_src - -* Discussion - -The purpose of exploring datasets is to ask questions, answer questions, and -discover intelligence that can be used to inform decision-making. So, what have -we found in this dataset? - -Today we simply explored a publicly-available dataset to see what kind of -information it contained. During that exploration, we found that video game -sales peaked in 2006. That peak was largely due to Nintendo, who sold the top 5 -games in 2006 and has a number of games in the top-10 list for the years -1980-2020. Additionally, the top four platforms by global sales (Wii, NES, GB, -DS) are owned by Nintendo. - -We didn't explore everything this dataset has to offer, but we can tell from a -brief analysis that Nintendo seems to rule sales in the video gaming world. -Further analysis could provide insight into which genres, regions, publishers, -or world events are correlated with sales. -#+date: <2020-07-26 Sun 00:00:00> -#+title: A Location Intelligence Framework: Mapping Urban Business Clusters with Python -#+description: Methodology for utilizing data science techniques and Foursquare API data to analyze and select promising business sites within urban environments. -#+slug: business-analysis - -* Background Information - -This project aims to help investors learn more about a random city in order to -determine optimal locations for business investments. The data used in this -project was obtained using Foursquare's developer API. - -Fields include: - -- Venue Name -- Venue Category -- Venue Latitude -- Venue Longitude - -There are 232 records found using the center of Lincoln as the area of interest -with a radius of 10,000. - -* Import the Data - -The first step is the simplest: import the applicable libraries. We will be -using the libraries below for this project. - -#+begin_src python -# Import the Python libraries we will be using -import pandas as pd -import requests -import folium -import math -import json -from pandas.io.json import json_normalize -from sklearn.cluster import KMeans -#+end_src - -To begin our analysis, we need to import the data for this project. The data we -are using in this project comes directly from the Foursquare application -programming interface (API). The first step is to get the latitude and longitude -of the city being studied (Lincoln, NE) and setting up the folium map. - -#+begin_src python -# Define the latitude and longitude, then map the results -latitude = 40.806862 -longitude = -96.681679 -map_LNK = folium.Map(location=[latitude, longitude], zoom_start=12) - -map_LNK -#+end_src - -Now that we have defined our city and created the map, we need to go get the -business data. The Foursquare API will limit the results to 100 per API call, so -we use our first API call below to determine the total results that Foursquare -has found. Since the total results are 232, we perform the API fetching process -three times (100 + 100 + 32 = 232). - -#+begin_src python -# Foursquare API credentials -CLIENT_ID = 'your-client-id' -CLIENT_SECRET = 'your-client-secret' -VERSION = '20180604' - -# Set up the URL to fetch the first 100 results -LIMIT = 100 -radius = 10000 -url = 'https://api.foursquare.com/v2/venues/explore?&client_id={}&client_secret={}&v={}&ll={},{}&radius={}&limit={}'.format( - CLIENT_ID, - CLIENT_SECRET, - VERSION, - latitude, - longitude, - radius, - LIMIT) - -# Fetch the first 100 results -results = requests.get(url).json() - -# Determine the total number of results needed to fetch -totalResults = results['response']['totalResults'] -totalResults - -# Set up the URL to fetch the second 100 results (101-200) -LIMIT = 100 -offset = 100 -radius = 10000 -url2 = 'https://api.foursquare.com/v2/venues/explore?&client_id={}&client_secret={}&v={}&ll={},{}&radius={}&limit={}&offset={}'.format( - CLIENT_ID, - CLIENT_SECRET, - VERSION, - latitude, - longitude, - radius, - LIMIT, - offset) - -# Fetch the second 100 results (101-200) -results2 = requests.get(url2).json() - -# Set up the URL to fetch the final results (201 - 232) -LIMIT = 100 -offset = 200 -radius = 10000 -url3 = 'https://api.foursquare.com/v2/venues/explore?&client_id={}&client_secret={}&v={}&ll={},{}&radius={}&limit={}&offset={}'.format( - CLIENT_ID, - CLIENT_SECRET, - VERSION, - latitude, - longitude, - radius, - LIMIT, - offset) - -# Fetch the final results (201 - 232) -results3 = requests.get(url3).json() -#+end_src - -* Clean the Data - -Now that we have our data in three separate dataframes, we need to combine them -into a single dataframe and make sure to reset the index so that we have a -unique ID for each business. The =get_category_type= function below will pull -the categories and name from each business's entry in the Foursquare data -automatically. Once all the data has been labeled and combined, the results are -stored in the =nearby_venues= dataframe. - -#+begin_src python -# This function will extract the category of the venue from the API dictionary -def get_category_type(row): - try: - categories_list = row['categories'] - except: - categories_list = row['venue.categories'] - - if len(categories_list) == 0: - return None - else: - return categories_list[0]['name'] - -# Get the first 100 venues -venues = results['response']['groups'][0]['items'] -nearby_venues = json_normalize(venues) - -# filter columns -filtered_columns = ['venue.name', 'venue.categories', 'venue.location.lat', 'venue.location.lng'] -nearby_venues = nearby_venues.loc[:, filtered_columns] - -# filter the category for each row -nearby_venues['venue.categories'] = nearby_venues.apply(get_category_type, axis=1) - -# clean columns -nearby_venues.columns = [col.split(".")[-1] for col in nearby_venues.columns] - ---- - -# Get the second 100 venues -venues2 = results2['response']['groups'][0]['items'] -nearby_venues2 = json_normalize(venues2) # flatten JSON - -# filter columns -filtered_columns2 = ['venue.name', 'venue.categories', 'venue.location.lat', 'venue.location.lng'] -nearby_venues2 = nearby_venues2.loc[:, filtered_columns] - -# filter the category for each row -nearby_venues2['venue.categories'] = nearby_venues2.apply(get_category_type, axis=1) - -# clean columns -nearby_venues2.columns = [col.split(".")[-1] for col in nearby_venues.columns] -nearby_venues = nearby_venues.append(nearby_venues2) - ---- - -# Get the rest of the venues -venues3 = results3['response']['groups'][0]['items'] -nearby_venues3 = json_normalize(venues3) # flatten JSON - -# filter columns -filtered_columns3 = ['venue.name', 'venue.categories', 'venue.location.lat', 'venue.location.lng'] -nearby_venues3 = nearby_venues3.loc[:, filtered_columns] - -# filter the category for each row -nearby_venues3['venue.categories'] = nearby_venues3.apply(get_category_type, axis=1) - -# clean columns -nearby_venues3.columns = [col.split(".")[-1] for col in nearby_venues3.columns] - -nearby_venues = nearby_venues.append(nearby_venues3) -nearby_venues = nearby_venues.reset_index(drop=True) -nearby_venues -#+end_src - -* Visualize the Data - -We now have a complete, clean data set. The next step is to visualize this data -onto the map we created earlier. We will be using folium's =CircleMarker()= -function to do this. - -#+begin_src python -# add markers to map -for lat, lng, name, categories in zip(nearby_venues['lat'], nearby_venues['lng'], nearby_venues['name'], nearby_venues['categories']): - label = '{} ({})'.format(name, categories) - label = folium.Popup(label, parse_html=True) - folium.CircleMarker( - [lat, lng], - radius=5, - popup=label, - color='blue', - fill=True, - fill_color='#3186cc', - fill_opacity=0.7, - ).add_to(map_LNK) - -map_LNK -#+end_src - -* Clustering: /k-means/ - -To cluster the data, we will be using the /k-means/ algorithm. This algorithm is -iterative and will automatically make sure that data points in each cluster are -as close as possible to each other, while being as far as possible away from -other clusters. - -However, we first have to figure out how many clusters to use (defined as the -variable 'k'). To do so, we will use the next two functions to calculate the sum -of squares within clusters and then return the optimal number of clusters. - -#+begin_src python -# This function will return the sum of squares found in the data -def calculate_wcss(data): - wcss = [] - for n in range(2, 21): - kmeans = KMeans(n_clusters=n) - kmeans.fit(X=data) - wcss.append(kmeans.inertia_) - - return wcss - -# Drop 'str' cols so we can use k-means clustering -cluster_df = nearby_venues.drop(columns=['name', 'categories']) - -# calculating the within clusters sum-of-squares for 19 cluster amounts -sum_of_squares = calculate_wcss(cluster_df) - -# This function will return the optimal number of clusters -def optimal_number_of_clusters(wcss): - x1, y1 = 2, wcss[0] - x2, y2 = 20, wcss[len(wcss)-1] - - distances = [] - for i in range(len(wcss)): - x0 = i+2 - y0 = wcss[i] - numerator = abs((y2-y1)*x0 - (x2-x1)*y0 + x2*y1 - y2*x1) - denominator = math.sqrt((y2 - y1)**2 + (x2 - x1)**2) - distances.append(numerator/denominator) - - return distances.index(max(distances)) + 2 - -# calculating the optimal number of clusters -n = optimal_number_of_clusters(sum_of_squares) -#+end_src - -Now that we have found that our optimal number of clusters is six, we need to -perform k-means clustering. When this clustering occurs, each business is -assigned a cluster number from 0 to 5 in the dataframe. - -#+begin_src python -# set number of clusters equal to the optimal number -kclusters = n - -# run k-means clustering -kmeans = KMeans(n_clusters=kclusters, random_state=0).fit(cluster_df) - -# add clustering labels to dataframe -nearby_venues.insert(0, 'Cluster Labels', kmeans.labels_) -#+end_src - -Success! We now have a dataframe with clean business data, along with a -cluster number for each business. Now let's map the data using six -different colors. - -#+begin_src python -# create map with clusters -map_clusters = folium.Map(location=[latitude, longitude], zoom_start=12) -colors = ['#0F9D58', '#DB4437', '#4285F4', '#800080', '#ce12c0', '#171717'] - -# add markers to the map -for lat, lng, name, categories, cluster in zip(nearby_venues['lat'], nearby_venues['lng'], nearby_venues['name'], nearby_venues['categories'], nearby_venues['Cluster Labels']): - label = '[{}] {} ({})'.format(cluster, name, categories) - label = folium.Popup(label, parse_html=True) - folium.CircleMarker( - [lat, lng], - radius=5, - popup=label, - color=colors[int(cluster)], - fill=True, - fill_color=colors[int(cluster)], - fill_opacity=0.7).add_to(map_clusters) - -map_clusters -#+end_src - -* Investigate Clusters - -Now that we have figured out our clusters, let's do a little more analysis to -provide more insight into the clusters. With the information below, we can see -which clusters are more popular for businesses and which are less popular. The -results below show us that clusters 0 through 3 are popular, while clusters 4 -and 5 are not very popular at all. - -#+begin_src python -# Show how many venues are in each cluster -color_names = ['Dark Green', 'Red', 'Blue', 'Purple', 'Pink', 'Black'] -for x in range(0,6): - print("Color of Cluster", x, ":", color_names[x]) - print("Venues found in Cluster", x, ":", nearby_venues.loc[nearby_venues['Cluster Labels'] == x, nearby_venues.columns[:]].shape[0]) - print("---") -#+end_src - -Our last piece of analysis is to summarize the categories of businesses within -each cluster. With these results, we can clearly see that restaurants, coffee -shops, and grocery stores are the most popular. - -#+begin_src python -# Calculate how many venues there are in each category -# Sort from largest to smallest -temp_df = nearby_venues.drop(columns=['name', 'lat', 'lng']) - -cluster0_grouped = temp_df.loc[temp_df['Cluster Labels'] == 0].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) -cluster1_grouped = temp_df.loc[temp_df['Cluster Labels'] == 1].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) -cluster2_grouped = temp_df.loc[temp_df['Cluster Labels'] == 2].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) -cluster3_grouped = temp_df.loc[temp_df['Cluster Labels'] == 3].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) -cluster4_grouped = temp_df.loc[temp_df['Cluster Labels'] == 4].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) -cluster5_grouped = temp_df.loc[temp_df['Cluster Labels'] == 5].groupby(['categories']).count().sort_values(by='Cluster Labels', ascending=False) - -# show how many venues there are in each cluster (> 1) -with pd.option_context('display.max_rows', None, 'display.max_columns', None): - print("\n\n", "Cluster 0:", "\n", cluster0_grouped.loc[cluster0_grouped['Cluster Labels'] > 1]) - print("\n\n", "Cluster 1:", "\n", cluster1_grouped.loc[cluster1_grouped['Cluster Labels'] > 1]) - print("\n\n", "Cluster 2:", "\n", cluster2_grouped.loc[cluster2_grouped['Cluster Labels'] > 1]) - print("\n\n", "Cluster 3:", "\n", cluster3_grouped.loc[cluster3_grouped['Cluster Labels'] > 1]) - print("\n\n", "Cluster 4:", "\n", cluster4_grouped.loc[cluster4_grouped['Cluster Labels'] > 1]) - print("\n\n", "Cluster 5:", "\n", cluster5_grouped.loc[cluster5_grouped['Cluster Labels'] > 1]) -#+end_src - -* Discussion - -In this project, we gathered location data for Lincoln, Nebraska, USA and -clustered the data using the k-means algorithm in order to identify the unique -clusters of businesses in Lincoln. Through these actions, we found that there -are six unique business clusters in Lincoln and that two of the clusters are -likely unsuitable for investors. The remaining four clusters have a variety of -businesses, but are largely dominated by restaurants and grocery stores. - -Using this project, investors can now make more informed decisions when deciding -the location and category of business in which to invest. - -Further studies may involve other attributes for business locations, such as -population density, average wealth across the city, or crime rates. In addition, -further studies may include additional location data and businesses by utilizing -multiple sources, such as Google Maps and OpenStreetMap. -#+date: <2020-08-22 Sat 00:00:00> -#+title: Configure GitHub Pages to Use Your Root Domain Instead of WWW -#+description: Stepwise instructions for configuring redirection of GitHub Pages sites from the www subdomain to the apex domain to improve domain resolution and access consistency. -#+slug: redirect-github-pages - -* Short answer - -** Step 1 - -Add a new file called =CNAME= (canonical name) to your GitHub Pages repository -containing only one line: your top-level domain name. E.g.: =example.com= - -** Step 2 - -[Optional] but highly recommended - -2.1: Remove all other top-level records (prefixed with @) of type A from your -DNS configuration. - -2.2: Remove a CNAME record for the second-level domain =www=, if it is present. - -** Step 3 - -Add these 5 entries to the very top of your domain name system (DNS) -configuration: - -#+begin_src txt -@ A 185.199.108.153 -@ A 185.199.109.153 -@ A 185.199.110.153 -@ A 185.199.111.153 -www CNAME your_github_username.github.io. -#+end_src - -Replace =your_github_username= with your actual GitHub username. - -** Step 4 - -Wait for your DNS changes to propagate. DNS changes aren't effective -immediately. They can take up to a full day to propagate. - -* Long answer - -This issue has two sides. One is the DNS configuration itself. Another one is -the way GitHub Pages will forward hypertext transfer protocol (HTTP) requests. - -We need to know a few things to understand what GitHub is trying to say in their -documentation. - -** DNS Entry Types - -There are two types of DNS records which interest us: CNAME and A. - -=A= is also known as =Apex= or sometimes as =root entry=. It forwards requests -to a specified fixed IP address. =CNAME= entry forwards requests to a specified -URL (actual valid plain text URL, not an internet protocol (IP) address). - -** DNS Load balancing - -GitHub has one central URL address which accepts all DNS requests for GitHub -Pages: =http://username.github.io=. That URL is resolved to different IP -addresses based on your geographical location. Website hosted on GitHub Pages is -a simple collection of =HTML=, =CSS= and =JS= files. GitHub distributes these -files to different servers across the globe. So that when your browser sends a -request from Europe, it receives data from a server in Europe. The same is valid -for the requests from Asia and the USA. - -** What GitHub is trying to say - -Since =A= records in DNS must contain IP addresses, and they must be either -=185.199.108.153= or =185.199.109.153= or =185.199.110.153= or -=185.199.111.153=, there is no way to forward requests to a server located -somewhere in Europe or Asia. Your website hosted at GitHub Pages will be -downloaded from a central GitHub Pages server. There is a minor risk that if -GitHub Pages DNS servers (=x.x.x.153=) are down for some reason, all custom -domains which use fixed GitHub Pages IP addresses will not be accessible (their -DNS requests will not be resolvable). - -That is why GitHub strongly suggests to either use a second-level domain for -your GitHub Pages (e.g. =blog.example.com=) or use a DNS service provider that -supports a record type =ALIAS= that acts as =A= record but forwards request to a -URL address (e.g. =username.github.io=) instead of a fixed IP address. - -** How GitHub Pages treats HTTP requests - -After a DNS request for =your_github_username.github.io= is resolved into an IP -address, e.g. =185.199.108.153= your browser sends an HTTP request to that -server with an HTTP header =Host=. Below are =curl= examples that load the same -website (these examples might not work if you are behind a proxy server): - -#+begin_src sh -curl --header "Host: your_github_username.github.io" http://185.199.108.153/ -curl --header "Host: www.example.com" http://185.199.108.153/ -curl --header "Host: example.com" http://185.199.108.153/ -#+end_src - -This way GitHub Pages servers know which user website to serve. - -#+begin_quote -GitHub Pages server will automatically redirect HTTP requests to the top-level -domain if your =CNAME= file contains =example.com= but =www.example.com= is -requested. - -The same is valid if your =CNAME= file contains =www.example.com= but the header -=Host= in the =HTTP= request contains =example.com=. -#+end_quote - -** Why can't I add a =CNAME= record entry that accepts a top-level request (=@=) to my DNS configuration? - -Quote from the GitHub Pages documentation: - -#+begin_quote -Warning: Do not create a CNAME record for your custom apex domain! Doing so may -cause issues with other services, such as email, on that domain. -#+end_quote - -** References: - -1. [[https://docs.github.com/en/github/working-with-github-pages/configuring-a-custom-domain-for-your-github-pages-site][Setting up a custom domain with GitHub Pages]] -2. [[https://docs.github.com/en/github/working-with-github-pages/troubleshooting-custom-domains-and-github-pages][My custom domain isn't working]] -3. [[https://serverfault.com/questions/589370/cannot-access-my-github-pages-website-by-ip-address][Cannot access my GitHub Pages website by IP Address]] -4. [[https://stackoverflow.com/questions/23375422/how-do-i-set-up-github-pages-to-redirect-dns-requests-from-a-subdomain-e-g-www][How do I set up GitHub Pages to redirect DNS requests from a subdomain (e.g. - www) to the top-level domain (TLD, Apex record)?]] -#+date: <2020-08-29 Sat 00:00:00> -#+title: PHP User Authentication: Create, Validate, and Manage Sessions -#+description: Comprehensive guide to developing a secure user login system in PHP, including account creation, session management, and logout procedures. -#+slug: php-auth-flow - -* Introduction - -When creating websites that will allow users to create accounts, the developer -always needs to consider the proper authentication flow for their app. For -example, some developers will utilize an application programming interface (API) -for authentication, some will use OAuth, and some may just use their own simple -database. - -For those using pre-built libraries, authentication may simply be a problem of -copying and pasting the code from their library's documentation. For example, -here's the code I use to authenticate users with the Tumblr OAuth API for my -Tumblr client, Vox Populi: - -#+begin_src php -// Start the session -session_start(); - -// Use my key/secret pair to create a new client connection -$consumer_key = getenv('CONSUMER_KEY'); -$consumer_secret = getenv('CONSUMER_SECRET'); -$client = new Tumblr\API\Client($consumer_key, $consumer_secret); -$requestHandler = $client->getRequestHandler(); -$requestHandler->setBaseUrl('https://www.tumblr.com/'); - -// Check the session and cookies to see if the user is authenticated -// Otherwise, send user to Tumblr authentication page and set tokens from Tumblr's response - -// Authenticate client -$client = new Tumblr\API\Client( - $consumer_key, - $consumer_secret, - $token, - $token_secret -); -#+end_src - -However, developers creating authentication flows from scratch will need to -think carefully about when to make sure a web page will check the user's -authenticity. - -In this article, we're going to look at a simple authentication flow using a -MySQL database and PHP. - -* Creating User Accounts - -The beginning to any type of user authentication is to create a user account. -This process can take many formats, but the simplest is to accept user input -from a form (e.g., username and password) and send it over to your database. For -example, here's a snippet that shows how to get username and password parameters -that would come when a user submits a form to your PHP script. - -*Note*: Ensure that your password column is large enough to hold the hashed -value (at least 60 characters or longer). - -#+begin_src php -// Get the values from the URL -$username = $_POST['username']; -$raw_password = $_POST['password']; - -// Hash password -// password_hash() will create a random salt if one isn't provided, and this is generally the easiest and most secure approach. -$password = password_hash($raw_password, PASSWORD_DEFAULT); - -// Save database details as variables -$servername = "localhost"; -$username = "username"; -$password = "password"; -$dbname = "myDB"; - -// Create connection to the database -$conn = new mysqli($servername, $username, $password, $dbname); - -// Check connection -if ($conn->connect_error) { - die("Connection failed: " . $conn->connect_error); -} - -$sql = "INSERT INTO users (username, password) -VALUES ('$username', '$password')"; - -if ($conn->query($sql) === TRUE) { - echo "New record created successfully"; -} else { - echo "Error: " . $sql . "<br>" . $conn->error; -} - -$conn->close(); -#+end_src - -** Validate Returning Users - -To be able to verify that a returning user has a valid username and password in -your database is as simple as having users fill out a form and comparing their -inputs to your database. - -#+begin_src php -// Query the database for username and password -// ... - -if(password_verify($password_input, $hashed_password)) { - // If the input password matched the hashed password in the database - // Do something, log the user in. -} - -// Else, Redirect them back to the login page. -... -#+end_src - -* Storing Authentication State - -Once you've created the user's account, now you're ready to initialize the -user's session. *You will need to do this on every page you load while the user -is logged in.* To do so, simply enter the following code snippet: - -#+begin_src php -session_start(); -#+end_src - -Once you've initialized the session, the next step is to store the session in a -cookie so that you can access it later. - -#+begin_src php -setcookie(session_name()); -#+end_src - -Now that the session name has been stored, you'll be able to check if there's an -active session whenever you load a page. - -#+begin_src php -if(isset(session_name())) { - // The session is active -} -#+end_src - -** Removing User Authentication - -The next logical step is to give your users the option to log out once they are -done using your application. This can be tricky in PHP since a few of the -standard ways do not always work. - -#+begin_src php -// Initialize the session. -// If you are using session_name("something"), don't forget it now! -session_start(); - -// Delete authentication cookies -unset($_COOKIE[session_name()]); -setcookie(session_name(), "", time() - 3600, "/logged-in/"); -unset($_COOKIE["PHPSESSID"]); -setcookie("PHPSESSID", "", time() - 3600, "/logged-in/"); - -// Unset all of the session variables. -$_SESSION = array(); -session_unset(); - -// If it's desired to kill the session, also delete the session cookie. -// Note: This will destroy the session, and not just the session data! -if (ini_get("session.use_cookies")) { - $params = session_get_cookie_params(); - setcookie(session_name(), '', time() - 42000, - $params["path"], $params["domain"], - $params["secure"], $params["httponly"] - ); -} - -// Finally, destroy the session. -session_destroy(); -session_write_close(); - -// Go back to sign-in page -header('Location: https://example.com/logged-out/'); -die(); -#+end_src - -* Wrapping Up - -Now you should be ready to begin your authentication programming with PHP. You -can create user accounts, create sessions for users across different pages of -your site, and then destroy the user data when they're ready to leave. - -For more information on this subject, I recommend reading the [[https://www.php.net/][PHP Documentation]]. -Specifically, you may want to look at [[https://www.php.net/manual/en/features.http-auth.php][HTTP Authentication with PHP]], [[https://www.php.net/manual/en/book.session.php][session -handling]], and [[https://www.php.net/manual/en/function.hash.php][hash]]. -#+date: <2020-09-01 Tue 00:00:00> -#+title: How to Use IBM Watson Visual Recognition API for Image Analysis -#+description: Technical overview and application instructions for using IBM Watson Visual Recognition service, with focus on API configuration, image input processing, and classification output handling. -#+slug: visual-recognition - -* What is IBM Watson? - -If you've never heard of [[https://www.ibm.com/watson][Watson]], this service is a suite of enterprise-ready -artificial intelligence (AI) services, applications, and tooling provided by -IBM. Watson contains quite a few useful tools for data scientists and students, -including the subject of this post today: visual recognition. - -If you'd like to view the official documentation for the Visual Recognition -application programming interface (API), visit the [[https://cloud.ibm.com/apidocs/visual-recognition/visual-recognition-v3?code=python][API Docs]]. - -* Prerequisites - -To be able to use Watson Visual Recognition, you'll need the following: - -1. Create a free account on [[https://www.ibm.com/cloud/watson-studio][IBM Watson Studio]]. -2. Add the [[https://www.ibm.com/cloud/watson-visual-recognition][Watson Visual Recognition]] service to your IBM Watson account. -3. Get your API key and URL (uniform resource locator). To do this, first go to - the [[https://dataplatform.cloud.ibm.com/home2?context=cpdaas][profile dashboard]] for your IBM account and click on the Watson Visual - Recognition service you created. This will be listed in the section titled - *Your services*. Then click the *Credentials* tab and open the - *Auto-generated credentials* dropdown. Copy your API key and URL so that you - can use them in the Python script later. -4. *[Optional]* While not required, you can also create the Jupyter Notebook for - this project right inside [[https://www.ibm.com/cloud/watson-studio][Watson Studio]]. Watson Studio will save your - notebooks inside an organized project and allow you to use their other - integrated products, such as storage containers, AI models, documentation, - external sharing, etc. - -* Calling the IBM Watson Visual Recognition API - -Okay, now let's get started. - -To begin, we need to install the proper Python package for IBM Watson. - -#+begin_src sh -pip install --upgrade --user "ibm-watson>=4.5.0" -#+end_src - -Next, we need to specify the API key, version, and URL given to us when we -created the Watson Visual Recognition service. - -#+begin_src python -apikey = "<your-apikey>" -version = "2018-03-19" -url = "<your-url>" -#+end_src - -Now, let's import the necessary libraries and authenticate our service. - -#+begin_src python -import json -from ibm_watson import VisualRecognitionV3 -from ibm_cloud_sdk_core.authenticators import IAMAuthenticator - -authenticator = IAMAuthenticator(apikey) -visual_recognition = VisualRecognitionV3( - version=version, - authenticator=authenticator -) - -visual_recognition.set_service_url(url) -#+end_src - -*[Optional]* If you'd like to tell the API not to use any data to improve their -products, set the following header. - -#+begin_src python -visual_recognition.set_default_headers({'x-watson-learning-opt-out': "true"}) -#+end_src - -Now we have our API all set and ready to go. For this example, I'm going to -include a =dict= of photos to load as we test out the API. - -#+begin_src python -data = [ - { - "title": "Grizzly Bear", - "url": "https://example.com/photos/image1.jpg" - }, - { - "title": "Nature Lake", - "url": "https://example.com/photos/image2.jpg" - }, - { - "title": "Welcome Sign", - "url": "https://example.com/photos/image3.jpg" - }, - { - "title": "Honey Badger", - "url": "https://example.com/photos/image4.jpg" - }, - { - "title": "Grand Canyon Lizard", - "url": "https://example.com/photos/image5.jpg" - }, - { - "title": "Castle", - "url": "https://example.com/photos/image6.jpg" - } -] -#+end_src - -Now that we've set up our libraries and have the photos ready, let's create a -loop to call the API for each image. The code below shows a loop that calls the -URL of each image and sends it to the API, requesting results with at least 60% -confidence. The results are output to the console with dotted lines separating -each section. - -In the case of an API error, the codes and explanations are output to the -console. - -#+begin_src python -from ibm_watson import ApiException - -for x in range(len(data)): -try: - url = data[x]["url"] - images_filename = data[x]["title"] - classes = visual_recognition.classify( - url=url, - images_filename=images_filename, - threshold='0.6', - owners=["IBM"]).get_result() - print("-----------------------------------------------") - print("Image Title: ", data[x]["title"], "\n") - print("Image URL: ", data[x]["url"], "\n") - classification_results = classes["images"][0]["classifiers"][0]["classes"] - for result in classification_results: - print(result["class"], "(", result["score"], ")") - print("-----------------------------------------------") -except ApiException as ex: - print("Method failed with status code " + str(ex.code) + ": " + ex.message) -#+end_src - -* The Results - -Here we can see the full result set of our function above. If you view each of -the URLs that we sent to the API, you'll be able to see that it was remarkably -accurate. To be fair, these are clear high-resolution, clear photos shot with a -professional camera. In reality, you will most likely be processing images that -are lower quality and may have a lot of noise in the photo. - -However, we can clearly see the benefit of being able to call this API instead -of attempting to write our own image recognition function. Each of the -classifications returned was a fair description of the image. - -If you wanted to restrict the results to those that are at least 90% confident -or greater, you would simply adjust the =threshold= in the -=visual_recognition.classify()= function. - -When your program runs, it should show the output below for each photo you -provide. - -#+begin_src txt ----------------------------------------------------------------- -Image Title: Grizzly Bear -Image URL: https://example.com/photos/image1.jpg - -brown bear ( 0.944 ) -bear ( 1 ) -carnivore ( 1 ) -mammal ( 1 ) -animal ( 1 ) -Alaskan brown bear ( 0.759 ) -greenishness color ( 0.975 ) ----------------------------------------------------------------- -#+end_src - -* Discussion - -Now, this was a very minimal implementation of the API. We simply supplied some -images and looked to see how accurate the results were. However, you could -implement this type of API into many machine learning (ML) models. - -For example, you could be working for a company that scans their warehouses or -inventory using drones. Would you want to pay employees to sit there and watch -drone footage all day in order to identify or count things in the video? -Probably not. Instead, you could use a classification system similar to this one -in order to train your machine learning model to correctly identify items that -the drones show through video. More specifically, you could have your machine -learning model watch a drone fly over a field of sheep in order to count how -many sheep are living in that field. - -There are many ways to implement machine learning functionality, but hopefully -this post helped inspire some deeper thought about the tools that can help -propel us further into the future of machine learning and AI. -#+date: <2020-09-22 Tue 00:00:00> -#+title: The Strategic Role of Internal Audit in Risk, Governance, and Compliance -#+description: Analysis of internal audit processes, their contribution to risk management, governance frameworks, and compliance monitoring within corporate structures. -#+slug: internal-audit - -* Definitions - -One of the many reasons that Internal Audit needs such thorough explaining to -non-auditors is that Internal Audit can serve many purposes, depending on the -organization's size and needs. However, the Institute of Internal Auditors (IIA) -defines Internal Auditing as: - -#+begin_quote -Internal auditing is an independent, objective assurance and consulting activity -designed to add value and improve an organization's operations. It helps an -organization accomplish its objectives by bringing a systematic, disciplined -approach to evaluate and improve the effectiveness of risk management, control, -and governance processes. -#+end_quote - -However, this definition uses quite a few terms that aren't clear unless the -reader already has a solid understanding of the auditing profession. To further -explain, the following is a list of definitions that can help supplement -understanding of internal auditing. - -** Independent - -Independence is the freedom from conditions that threaten the ability of the -internal audit activity to carry out internal audit responsibilities in an -unbiased manner. To achieve the degree of independence necessary to effectively -carry out the responsibilities of the internal audit activity, the chief audit -executive has direct and unrestricted access to senior management and the board. -This can be achieved through a dual-reporting relationship. Threats to -independence must be managed at the individual auditor, engagement, functional, -and organizational levels. - -** Objective - -Objectivity is an unbiased mental attitude that allows internal auditors to -perform engagements in such a manner that they believe in their work product and -that no quality compromises are made. Objectivity requires that internal -auditors do not subordinate their judgment on audit matters to others. Threats -to objectivity must be managed at the individual auditor, engagement, -functional, and organizational levels. - -** Assurance - -Assurance services involve the internal auditor's objective assessment of -evidence to provide opinions or conclusions regarding an entity, operation, -function, process, system, or other subject matters. The internal auditor -determines the nature and scope of an assurance engagement. Generally, three -parties are participants in assurance services: (1) the person or group directly -involved with the entity, operation, function, process, system, or other -subject - (the process owner), (2) the person or group making the assessment - -(the internal auditor), and (3) the person or group using the assessment - (the -user). - -** Consulting - -Consulting services are advisory in nature and are generally performed at the -specific request of an engagement client. The nature and scope of the consulting -engagement are subject to agreement with the engagement client. Consulting -services generally involve two parties: (1) the person or group offering the -advice (the internal auditor), and (2) the person or group seeking and receiving -the advice (the engagement client). When performing consulting services, the -internal auditor should maintain objectivity and not assume management -responsibility. - -** Governance, Risk Management, & Compliance (GRC) - -The integrated collection of capabilities that enable an organization to -reliably achieve objectives, address uncertainty and act with integrity. - -* Audit Charter & Standards - -First, it's important to note that not every organization needs internal -auditors. In fact, it's unwise for an organization to hire internal auditors -unless they have regulatory requirements for auditing and have the capital to -support the department. Internal audit is a cost center that can only affect -revenue indirectly. - -Once an organization determines the need for internal assurance services, they -will hire a Chief Audit Executive and create the audit charter. This charter is -a document, approved by the company's governing body, that will define internal -audit's purpose, authority, responsibility, and position within the -organization. Fortunately, the IIA has model charters available to IIA members -for those developing or improving their charter. - -Beyond the charter and organizational documents, internal auditors follow a few -different standards in order to perform their job. First is the International -Professional Practices Framework (IPPF) by the IIA, which is the model of -standards for internal auditing. In addition, ISACA's Information Technology -Assurance Framework (ITAF) helps guide auditors in reference to information -technology (IT) compliance and assurance. Finally, additional standards such as -FASB, GAAP, and industry-specific standards are used when performing internal -audit work. - -* Three Lines of Defense - -[[https://theiia.org][The IIA]] released the original Three Lines of Defense model in 2013, but have -released an updated version in 2020. - -I won't go into depth about the changes made to the model in this article. -Instead, let's take a look at the most current model. - -The updated model forgets the strict idea of areas performing their own -functions or line of defense. Instead of talking about management, risk, and -internal audit as 1-2-3, the new model creates a more fluid and cooperative -model. - -Looking at this model from an auditing perspective shows us that auditors will -need to align, communicate, and collaborate with management, including business -area managers and chief officers, as well as reporting to the governing body. -The governing body will instruct internal audit /functionally/ on their goals -and track their progress periodically. - -However, the internal audit department will report /administratively/ to a chief -officer in the company for the purposes of collaboration, direction, and -assistance with the business. Note that in most situations, the governing body -is the audit committee on the company's board of directors. - -The result of this structure is that internal audit is an independent and -objective function that can provide assurance over the topics they audit. - -* Audit Process - -A normal audit will generally follow the same process, regardless of the topic. -However, certain special projects or abnormal business areas may call for -changes to the audit process. The audit process is not set in stone, it's simply -a set of best practices so that audits can be performed consistently. - -While different organizations may tweak the process, it will generally follow -this flow: - -** 1. Risk Assessment - -The risk assessment part of the process has historically been performed -annually, but many organizations have moved to performing this process much more -frequently. In fact, some organizations are moving to an agile approach that can -take new risks into the risk assessment and re-prioritize risk areas on-the-go. -To perform a risk assessment, leaders in internal audit will research industry -risks, consult with business leaders around the company, and perform analyses on -company data. - -Once a risk assessment has been documented, the audit department has a -prioritized list of risks that can be audited. This is usually in the form of -auditable entities, such as business areas or departments. - -** 2. Planning - -During the planning phase of an audit, auditors will meet with the business area -to discuss the various processes, controls, and risks applicable to the -business. This helps the auditors determine the scope limits for the audit, as -well as timing and subject-matter experts. Certain documents will be created in -this phase that will be used to keep the audit on-track an in-scope as it goes -forward. - -** 3. Testing - -The testing phase, also known as fieldwork or execution, is where internal -auditors will take the information they've discovered and test it against -regulations, industry standards, company rules, best practices, as well as -validating that any processes are complete and accurate. For example, an audit -of HR would most likely examine processes such as employee on-boarding, employee -termination, security of personally identifiable information (PII), or the IT -systems involved in these processes. Company standards would be examined and -compared against how the processes are actually being performed day-to-day, as -well as compared against regulations such as the Equal Employment Opportunity -(EEO), American with Disabilities Act, and National Labor Relations Act. - -** 4. Reporting - -Once all the tests have been completed, the audit will enter the reporting -phase. This is when the audit team will conclude on the evidence they've -collected, interviews they've held, and any opinions they've formed on the -controls in place. A summary of the audit findings, conclusions, and specific -recommendations are officially communicated to the client through a draft -report. Clients have the opportunity to respond to the report and submit an -action plan and time frame. These responses become part of the final report -which is distributed to the appropriate level of administration. - -** 5. Follow-Up - -After audits have been completed and management has formed action plans and time -frames for audit issues, internal audit will follow up once that due date has -arrived. In most cases, the follow-up will simply consist of a meeting to -discuss how the action plan has been completed and to request documentation to -prove it. - -* Audit Department Structure - -While an internal audit department is most often thought of as a team of -full-time employees, there are actually many different ways in which a -department can be structured. As the world becomes more digital and fast-paced, -outsourcing has become a more attractive option for some organizations. Internal -audit can be fully outsourced or partially outsourced, allowing for flexibility -in cases where turnover is high. - -In addition, departments can implement a rotational model. This allows for -interested employees around the organization to rotate into the internal audit -department for a period of time, allowing them to obtain knowledge of risks and -controls and allowing the internal audit team to obtain more business area -knowledge. This program is popular in very large organizations, but -organizations tend to rotate lower-level audit staff instead of managers. This -helps prevent any significant knowledge loss as auditors rotate out to business -areas. - -* Consulting - -Consulting is not an easy task at any organization, especially for a department -that can have negative perceptions within the organization as the "compliance -police." However, once an internal audit department has delivered value to -organization, adding consulting to their suite of services is a smart move. In -most cases, Internal Audit can insert themselves into a consulting role without -affecting the process of project management at the company. This means that -internal audit can add objective assurance and opinions to business areas as -they develop new processes, instead of coming in periodically to audit an area -and file issues that could have been fixed at the beginning. - -* Data Science & Data Analytics - -One major piece of the internal audit function in the modern world is data -science. While the process is data science, most auditors will refer to anything -in this realm as data analytics. Hot topics such as robotic process automation -(RPA), machine learning (ML), and data mining have taken over the auditing world -in recent years. These technologies have been immensely helpful with increasing -the effectiveness and efficiency of auditors. - -For example, mundane and repetitive tasks can be automated in order for auditors -to make more room in their schedules for labor-intensive work. Further, auditors -will need to adapt technologies like machine learning in order to extract more -value from the data they're using to form conclusions. -#+date: <2020-09-25 Fri 00:00:00> -#+title: Visualizing Global Happiness: A Choropleth Map with Python and Folium -#+description: Instructions for creating an interactive choropleth map visualizing international happiness data based on metrics such as GDP, social support, health indicators, freedom indices, generosity, and corruption levels. -#+slug: happiness-map - -* Background Information - -The dataset (obtained from [[https://www.kaggle.com/unsdsn/world-happiness][Kaggle]]) used in this article contains a list of -countries around the world, their happiness rankings and scores, as well as -other national scoring measures. - -Fields include: - -- Overall rank -- Country or region -- GDP per capita -- Social support -- Healthy life expectancy -- Freedom to make life choices -- Generosity -- Perceptions of corruption - -There are 156 records. Since there are ~195 countries in the world, we can see -that around 40 countries will be missing from this dataset. - -* Install Packages - -As always, run the =install= command for all packages needed to perform -analysis. - -#+begin_src python -!pip install folium geopandas matplotlib numpy pandas -#+end_src - -* Import the Data - -We only need a couple packages to create a choropleth map. We will use [[https://python-visualization.github.io/folium/][Folium]], -which provides map visualizations in Python. We will also use geopandas and -pandas to wrangle our data before we put it on a map. - -#+begin_src python -# Import the necessary Python packages -import folium -import geopandas as gpd -import pandas as pd -#+end_src - -To get anything to show up on a map, we need a file that will specify the -boundaries of each country. Luckily, GeoJSON files exist (for free!) on the -internet. To get the boundaries of every country in the world, we will use the -GeoJSON link shown below. - -GeoPandas will take this data and load it into a dataframe so that we can easily -match it to the data we're trying to analyze. Let's look at the GeoJSON -dataframe: - -#+begin_src python -# Load the GeoJSON data with geopandas -geo_data = gpd.read_file('https://raw.githubusercontent.com/datasets/geo-countries/master/data/countries.geojson') -geo_data.head() -#+end_src - -Next, let's load the data from the Kaggle dataset. I've downloaded this file, so -update the file path if you have it somewhere else. After loading, let's take a -look at this dataframe: - -#+begin_src python -# Load the world happiness data with pandas -happy_data = pd.read_csv(r'~/Downloads/world_happiness_data_2019.csv') -happy_data.head() -#+end_src - -* Clean the Data - -Some countries need to be renamed, or they will be lost when you merge the -happiness and GeoJSON dataframes. This is something I discovered when the map -below showed empty countries. I searched both data frames for the missing -countries to see the naming differences. Any countries that do not have records -in the =happy_data= data frame will not show up on the map. - -#+begin_src python -# Rename some countries to match our GeoJSON data - -# Rename USA -usa_index = happy_data.index[happy_data['Country or region'] == 'United States'] -happy_data.at[usa_index, 'Country or region'] = 'United States of America' - -# Rename Tanzania -tanzania_index = happy_data.index[happy_data['Country or region'] == 'Tanzania'] -happy_data.at[tanzania_index, 'Country or region'] = 'United Republic of Tanzania' - -# Rename the Congo -republic_congo_index = happy_data.index[happy_data['Country or region'] == 'Congo (Brazzaville)'] -happy_data.at[republic_congo_index, 'Country or region'] = 'Republic of Congo' - -# Rename the DRC -democratic_congo_index = happy_data.index[happy_data['Country or region'] == 'Congo (Kinshasa)'] -happy_data.at[democratic_congo_index, 'Country or region'] = 'Democratic Republic of the Congo' -#+end_src - -* Merge the Data - -Now that we have clean data, we need to merge the GeoJSON data with the -happiness data. Since we've stored them both in dataframes, we just need to call -the =.merge()= function. - -We will also rename a couple columns, just so that they're a little easier to -use when we create the map. - -#+begin_src python -# Merge the two previous dataframes into a single geopandas dataframe -merged_df = geo_data.merge(happy_data,left_on='ADMIN', right_on='Country or region') - -# Rename columns for ease of use -merged_df = merged_df.rename(columns = {'ADMIN':'GeoJSON_Country'}) -merged_df = merged_df.rename(columns = {'Country or region':'Country'}) -#+end_src - -* Create the Map - -The data is finally ready to be added to a map. The code below shows the -simplest way to find the center of the map and create a Folium map object. The -important part is to remember to reference the merged dataframe for our GeoJSON -data and value data. The columns specify which geo data and value data to use. - -#+begin_src python -# Assign centroids to map -x_map = merged_df.centroid.x.mean() -y_map = merged_df.centroid.y.mean() -print(x_map,y_map) - -# Creating a map object -world_map = folium.Map(location=[y_map, x_map], zoom_start=2,tiles=None) -folium.TileLayer('CartoDB positron',name='Dark Map',control=False).add_to(world_map) - -# Creating choropleth map -folium.Choropleth( - geo_data=merged_df, - name='Choropleth', - data=merged_df, - columns=['Country','Overall rank'], - key_on='feature.properties.Country', - fill_color='YlOrRd', - fill_opacity=0.6, - line_opacity=0.8, - legend_name='Overall happiness rank', - smooth_factor=0, - highlight=True -).add_to(world_map) -#+end_src - -Let's look at the resulting map. - -* Create a Tooltip on Hover - -Now that we have a map set up, we could stop. However, I want to add a tooltip -so that I can see more information about each country. The =tooltip_data= code -below will show a popup on hover with all the data fields shown. - -#+begin_src python - # Adding labels to map - style_function = lambda x: {'fillColor': '#ffffff', - 'color':'#000000', - 'fillOpacity': 0.1, - 'weight': 0.1} - -tooltip_data = folium.features.GeoJson( - merged_df, - style_function=style_function, - control=False, - tooltip=folium.features.GeoJsonTooltip( - fields=['Country' - ,'Overall rank' - ,'Score' - ,'GDP per capita' - ,'Social support' - ,'Healthy life expectancy' - ,'Freedom to make life choices' - ,'Generosity' - ,'Perceptions of corruption' - ], - aliases=['Country: ' - ,'Happiness rank: ' - ,'Happiness score: ' - ,'GDP per capita: ' - ,'Social support: ' - ,'Healthy life expectancy: ' - ,'Freedom to make life choices: ' - ,'Generosity: ' - ,'Perceptions of corruption: ' - ], - style=('background-color: white; color: #333333; font-family: arial; font-size: 12px; padding: 10px;') - ) -) -world_map.add_child(tooltip_data) -world_map.keep_in_front(tooltip_data) -folium.LayerControl().add_to(world_map) - -# Display the map -world_map -#+end_src - -The tooltip will now appear whenever you hover over a country. -#+date: <2020-10-12 Mon 00:00:00> -#+title: When Good Is Good Enough—And When It Isn't -#+description: Examination of decision-making principles relating to achieving sufficient quality levels, including trade-offs between perfection and adequacy in professional and operational contexts. -#+slug: mediocrity - -* Perfect is the Enemy of Good - -As the saying goes, "the best is the enemy of the good." As we strive for -perfection, we often fail to realize the implications of such an undertaking. -Attempting to reach perfection is often unrealistic. Even worse, it can get in -the way of achieving a good outcome. In certain situations, we try so hard to -achieve the ideal solution that we have burned the bridges that would have -allowed us to reach a lesser yet still superb solution. - -Philosophers throughout history have inspected this plight from many viewpoints. -Greek mythology speaks of the [[https://en.wikipedia.org/wiki/Golden_mean_(philosophy)][golden mean]], which uses the story of Icarus to -illustrate that sometimes "the middle course" is the best solution. In this -story, Daedalus, a famous artist of his time, built feathered wings for himself -and his son so that they might escape the clutches of King Minos. Daedalus warns -his beloved son whom he loved so much to "fly the middle course", between the -sea spray and the sun's heat. Icarus did not heed his father; he flew up and up -until the sun melted the wax off his wings. For not heeding the middle course, -he fell into the sea and drowned. - -More recently, management scholars have explored the [[https://en.wikipedia.org/wiki/Pareto_principle][Pareto principle]] and found -that as we increase the frequency of something, or strive to perform actions to -achieve some form of perfection, we run into [[https://en.wikipedia.org/wiki/Diminishing_returns][diminishing returns]]. - -Even further, Harold Demsetz is noted as coining the term [[https://en.wikipedia.org/wiki/Nirvana_fallacy][the Nirvana fallacy]] in -1969, which shows the fallacy of comparing actual things with unrealistic, -idealized alternatives. This is another trap that we may fall into, where we are -constantly thinking of the ultimate solutions to problems, when something more -realistic needs to be considered. - -Over and over throughout history, we've found that perfection is often -unrealistic and unachievable. However, we push ourselves and our peers to "give -100%" or "go the extra mile," while it may be that the better course is to give -a valuable level of effort while considering the effects of further effort on -the outcome. Working harder does not always help us achieve loftier goals. - -This has presented itself to me most recently during my time studying at my -university. I was anxious and feeling the stresses of my courses, career, and -personal life for quite a while, which was greatly affecting how well I was -doing at school and my level of effort at work. One day, I happened to be -talking to my father when he said something simple that hit home: - -#+begin_quote -All you can do is show up and do your best. Worrying about the outcomes won't -affect the outcome itself. -#+end_quote - -The thought was extremely straightforward and uncomplicated, yet it was -something that I had lost sight of during my stress-filled years at school. Ever -since then, I've found myself pausing and remembering that quote every time I -get anxious or stressed. It helps to stop and think "Can I do anything to affect -the outcome, or am I simply worrying over something I can't change?" - -* When Mediocrity Isn't Enough - -One problem with the philosophies presented in this post is that they are -implemented far too often in situations where mediocrity simply isn't adequate. -For example, let's take a look at digital user data, specifically -personally-identifiable information (PII). As a cybersecurity auditor in the -United States, I have found that most companies are concerned more with -compliance than any actual safeguards over the privacy or protection of user -data. Other than companies who have built their reputation on privacy and -security, most companies will use [[https://en.wikipedia.org/wiki/Satisficing][satisficing]] as their primary decision-making -strategy around user data. - -#+begin_quote -Satisficing is a decision-making strategy or cognitive heuristic that entails -searching through the available alternatives until an acceptability threshold is -met. -#+end_quote - -This means that each decision will be met with certain possible solutions until -one of the solutions meets their minimum acceptable standards. For companies -that deal with user data, the minimum-acceptable standards come from three -areas: - -1. Laws and regulations -2. Competitive pressure -3. Risk of monetary or reputation loss - -Working with project management or auditing, the primary concern here is the -risk of legal ramifications. Since the primary risk comes from laws and -regulations, companies will require that any project that involves user data -must follow all the rules of those laws so that the company can protect itself -from fines or other penalties. - -Following this, companies will consider best practices in order to place itself -in a competitive position (e.g. Google vs. Apple) and review any recent or -ongoing litigation against companies regarding user data. In a perfect company, -management would then consider the ethical responsibilities of their -organization and discuss their responsibilities over things like -personally-identifiable information. - -However, as we mentioned above, most companies follow the idea of satisficing, -which states that they have met the minimum acceptable standards and can now -move on to other decisions. Modern business culture in the United States -dictates that profits are the golden measure of how well a company or manager is -performing, so we often don't think about our responsibilities beyond these -basic standards. - -Not all situations demand excellence, but I believe that applying any philosophy -as a broad stroke across one's life can be a mistake. We must be able to think -critically about what we are doing as we do it and ask ourselves a few -questions. Have I done everything I can in this situation? Is mediocrity an -acceptable outcome, or should we strive for perfection, even if we can't attain -it? - -Taking a few moments to think critically throughout our day, as we make -decisions, can have a tremendous effect on the outcomes we create. -#+date: <2020-12-27 Sun 00:00:00> -#+title: Designing for Speed: A 5KB Site That Scores 100s on Lighthouse -#+description: Detailed process outlining methods for reducing website page size to approximately 5 kilobytes, enhancing loading speed, search engine indexing efficiency, and user interface responsiveness. -#+slug: website-redesign - -* A Brief History - -As a form of continuous learning and entertainment, I've been running a handful -of websites since 2016 when I took my first programming courses in college. I -maintain one main website, the place I consider the official website to -represent me. Under this site, I have a handful of subdirectories and -subdomains. - -One of the parts I've enjoyed the most about web development is the aspect of -designing an identity for a web page and working to find exciting ways to -display the site's content. Inevitably, this means I've changed the designs for -my websites more times than I could possibly count. Since I don't really host -anything on my main webpage that's vital, it allows me the freedom to change -things as inspiration strikes. - -Historically, I've relied on core utilities for spacing, components, and layouts -from [[https://getbootstrap.com][Bootstrap]] and added custom cascading style sheets (CSS) for fonts, accents, -colors, and other items. I also tend to create sites with no border radius on -items, visible borders, and content that takes up the entire screen (using -whitespace inside components instead of whitespace around my components). - -* The Redesign Process - -About a week ago, I found myself wishing for a new design yet again. The prior -design was largely inspired by IBM's [[https://www.carbondesignsystem.com][Carbon Design System]] and relied on jQuery, -Bootstrap, along with some compressed [[https://en.wikipedia.org/wiki/WebP][.webp]] images. - -To anyone who knows my preferences toward web design - and even in my personal -life - it should be no surprise that I immediately started looking for -inspiration on minimalism. While there are some decent minimalistic designs on -sites like [[https://dribbble.com/search/shots/popular/web-design?q=minimalism][Dribbble]], people seem to mostly discuss [[https://brutalist-web.design][brutalist web design]] when you -ask about minimalism. While brutalist web design doesn't have to be minimal, it -often is. - -I suppose, in a way, I did create a brutalist website since my HTML is semantic -and accessible, hyperlinks are colored and underlined, and all native browser -functions like scrolling and the back button work as expected. However, I didn't -think about brutalism while designing these sites. - -The new design followed a simple design process. I walked through the screens on -my blog and asked myself: "Is this element necessary for a user?" This allowed -me to first start by removing all javascript, which had the sole purpose of -allowing users to open a collapsed navbar on mobile. Replacing the collapsible -navbar allowed me to remove both jQuery and Bootstrap's javascript. - -Next, I removed things like author names (since I'm literally the only person -who will ever write on this site), multiple ways to click on a blog post card, -blog post descriptions, and the scroll-to-top button. It also helped to move all -categories to a single page, rather than have each category on its own page. - -The final big piece to finish the "[[https://en.wikipedia.org/wiki/Marie_Kondo#KonMari_method][KonMari]]"-like part of my process was to -remove Bootstrap CSS in its entirety. However, this meant pulling out a few very -useful classes, such as =.img-fluid= and the default font stacks to keep in my -custom CSS. - -After removing all the unnecessary pieces, I was finally able to reorganize my -content and add a very small amount of custom CSS to make everything pretty. -This took a brief amount of time, effectively just consisting of me converting -=<div>= tags into things like =<ul>= lists and choosing accent colors. - -* The Results - -** Reflection - -So, what did all of this reorganizing do to my webpages? Well, first, my -websites are now *ridiculously fast*. Since the prior designs were also minimal -and didn't have many images, they measured up in Firefox's Network Monitor -around 300 KB - 600KB. After making the changes, my main site is at 5 KB -transferred (22 KB total), and my blog is at 6.5 KB transferred (13 KB total). -*That means the redesigned pages are less than 2% the size of the old designs.* - -Google Lighthouse ranks the new webpage as 100 in performance, accessibility, -and best practices, with search engine optimization (SEO) at 92 since they think -tap targets are not sized appropriately for mobile users. First contextual -paints of the pages are under 0.8 seconds with 0 ms (millisecond) of blocking -time. However, the blog subdomain ranks at 100 for all four categories! First -contextual paints of the blog homepage are under 1.0 seconds with 0 ms of -blocking time, due to the fact that the CSS for my blog is within a separate CSS -file, and the CSS for my main website is simply embedded in the HTML file. - -Now that everything is complete, I can confidently say I'm happy with the result -and proud to look at the fastest set of websites I've created so far. -#+date: <2020-12-28 Mon 00:00:00> -#+title: Outrun the Future: A Review of Neon Drive's Gameplay and Style -#+description: Description of game mechanics, graphical style, and level design in Neon Drive, an arcade racing game inspired by 1980s synthwave aesthetics. -#+slug: neon-drive - -* Game Description - -[[https://store.steampowered.com/app/433910/Neon_Drive/][Neon Drive]] presents itself as a simple arcade-style game inspired by the arcade -race games of the 1980s, yet it has managed to take up hours of my life without -much effort. The game description, directly from the Steam page, is intriguing -enough to entice anyone who's been looking for a good arcade racing game: - -#+begin_quote -Neon Drive is a slick retro-futuristic arcade game that will make your brain -melt. You've been warned. From beautiful cityscapes and ocean roads to exploding -enemy spaceships, Neon Drive has it all. -#+end_quote - -* Gameplay - -The game holds true to the [[https://en.wikipedia.org/wiki/Retrofuturism][retro-futurism]] style, including chrome female robots, -pixelated arcade machines, and [[https://teddit.net/r/outrun/][outrun]] aesthetics. - -Each level of the game is shown as a separate arcade machine. Each arcade -machine lets you play on Normal, Hard, Insane, Practice, and Free Run. To beat -each arcade, you must reach the end of the level without crashing your car into -the various obstacles on the course. Basic levels let you move left or right to -avoid blocks in the road. Later levels put you through other tests, such as -dodging traffic or blasting asteroids. - -The game uses synthwave music to keep you on track to make the correct moves by -timing the beats of the songs to the correct moves on the screen. It reminds me -of the early Guitar Hero games, as well as mobile apps like VOEZ - repetition -and staying on-beat is the only way to win. - -* In-Game Screenshots - -Taking a look at the main menu, you can see that Neon Drive plays into every -stereotype you can think of around retro-futuristic, synthwave arcades (in a -good way). - -Once you get into the first level, we see that the choice of car fits right in -with the stereotypical cars of the 80s, like the [[https://en.wikipedia.org/wiki/DMC_DeLorean][DeLorean]] or the [[https://en.wikipedia.org/wiki/Ferrari_F40][Ferrari F40]]. -Each new level comes with new color schemes and cars, so you should never get -tired of the aesthetic. - -Personally, I love the orange and blue colors used in level 2: - -If you're the competitive type and getting 100% on all arcade machines isn't -enough, there are leaderboards for the regular part of the game, and the -endurance game mode. - -* Other Suggestions - -Neon Drive sits nicely within the well-founded cult genre of Outrun. Other games -that I've enjoyed in this same spectrum are: - -- [[https://store.steampowered.com/app/233270/Far_Cry_3__Blood_Dragon/][Far Cry 3: Blood Dragon]] -- [[https://store.steampowered.com/app/1239690/Retrowave/][Retrowave]] -- [[https://store.steampowered.com/app/732810/Slipstream/][Slipstream]] - -Although these games aren't necessarily in the same genre, they do have aspects -that place them close enough to interest gamers that enjoyed Neon Drive: - -- [[https://store.steampowered.com/app/311800/Black_Ice/][Black Ice]] -- [[https://store.steampowered.com/app/746850/Cloudpunk/][Cloudpunk]] -- [[https://store.steampowered.com/app/1222680/Need_for_Speed_Heat/][Need for Speed: Heat]] -- [[https://store.steampowered.com/app/1019310/VirtuaVerse/][VirtuaVerse]] - -Of course, if all you really care about is the arcade aspect of these games, you -can check out the [[https://store.steampowered.com/app/400020/Atari_Vault/][Atari Vault]] or any of the other classic games sold on Steam by -companies like Namco, Atari. For something like Nintendo, you'd have to settle -for buying used classic consoles or delve into the world of emulation. -#+date: <2020-12-29 Tue 00:00:00> -#+title: Your First Grue: Getting Started with Zork, the Iconic Text Adventure -#+description: Detailed operational guide for navigating Zork, a text-based interactive fiction game from the 1980s. Includes instructions for exploration, puzzle resolution, and item collection. -#+slug: zork - -* Download (Free) - -Before we get into the game itself, you should know that you can download Zork -for free from Infocom's [[http://infocom-if.org/downloads/downloads.html][download page]]. So feel free to boot it up and take a -ride back to the 1980s with this masterpiece. - -* Game Description - -Zork is an interactive, text-based computer game originally released in 1980. -This series, split into three separate games, introduced a robust and -sophisticated text parser to gamers. People were largely used to the simple -commands used in the popular game [[https://en.wikipedia.org/wiki/Colossal_Cave_Adventure][Colossal Cave Adventure]], but Zork allowed -users to send more complex commands that included prepositions and conjunctions. - -Zork tracks your score as you explore the map, find tools, and collect trophy -items (e.g., a jewel-encrusted egg). When you place your trophy items in the -trophy case found in the Living Room area, you gain score points. Collecting the -Twenty Treasures of Zork and placing them within the trophy case wins the game. -However, you must explore the map, solve puzzles, and avoid being eaten by a -grue to collect these treasures. - -* The Map - -Since Zork is a vast and complex game, it helps to have a map as you -explore and collect your trophies. However, if you want to play the game -as it was truly intended, you should try to play it without using the -map. - -#+caption: Zork Map -#+attr_html: :alt A map for Zork, showing passageways, restrictions, and all locations. -[[https://img.cleberg.net/blog/20201229-zork/zork_map.jpg]] - -/[[https://www.filfre.net/2012/01/exploring-zork-part-1/][Map Source]]/ - -* In-Game Screenshots - -After playing the game (for the first time ever) for several weeks around 2014, -I was finally able to beat the game with some online help to find the last -couple items. As I was writing this post, I installed the game again to grab -some screenshots to show off the true glory of this game. As noted in [[https://www.filfre.net/2012/01/exploring-zork-part-1/][Jimmy -Maher's Playthrough]], the original Zork games looked quite a bit different due to -the older hardware of computers like the Apple II and multiple bug fixes that -Infocom pushed out after the game's initial release. My play-through uses the -[[https://store.steampowered.com/app/570580/Zork_Anthology/][Zork Anthology]] version, which utilizes DOSBox on Windows. - -The first screenshot here shows the introductory information, which doesn't -include instructions of any kind for the player. If you haven't played text -adventures before, try to use simple commands like "go west," "look around," or -"hit troll with elvish sword." - -In this second screenshot, we see the player has entered the house and found the -trophy case in the living room. The lantern and sword in this room allow the -player to explore dark areas and attack enemies. If you don't use the lantern, -you won't be able to see anything in dark areas, and you may be eaten by a grue. - -Finally, we see that the player has found the first treasure: a jewel-encrusted -egg. These treasures can be taken back to the house and placed in the trophy -case or carried until you feel like you want to put things away. - -* Conclusion - -It's been quite a few years since I first played Zork, but I clearly remember -the late nights and bloodshot eyes that helped me find all the treasures. This -game is well worth the time and effort, even though the text-based aspect may be -off-putting to gamers who didn't have to grow up playing games without graphics. -However, I believe that the strategy and skills learned in early video games -like Zork can actually help you, even when playing newer games. - -If you do decide to play Zork, you can download Zork I, II, and III from -Infocom's [[http://infocom-if.org/downloads/downloads.html][download page]] for free or search the internet for an online version. -#+date: <2021-01-01 Fri 00:00:00> -#+title: SEUM: Speedrunners from Hell -#+description: Technical overview for utilizing the game SEUM, focusing on speedrunning techniques, gravity manipulation, teleportation functions, and level completion criteria. -#+slug: seum - -* Game Description - -[[https://store.steampowered.com/app/457210/SEUM_Speedrunners_from_Hell/][SEUM: Speedrunners from Hell]] is an incredibly fast-paced mashup of a puzzle game -and a free-running game. Created by [[https://pinestudio.co][Pine Studio]] in early 2016 and first released -as a [[https://gamejolt.com/games/seum-speedrunners-from-hell-demo/154868][demo on GameJolt]], this game was successfully green-lit on Steam and has -amassed a cult following on multiple consoles. - -Here's the game description straight from the developers: - -#+begin_quote -Like a bastard child of Quake 3 and Super Meat Boy, SEUM: Speedrunners -from Hell is truly hardcore and focuses on speed and fast reaction. -#+end_quote - -* Story - -SEUM does a great job setting the stage when you open the game for the -first time, playing an animated video in the form of comic book images. -You see Marty, the protagonist, sitting around drinking his beer as -Satan busts down the door, cuts his hand off, and steals all his beer -and bacon. As Satan is leaving, Marty whips a vinyl record across the -room and cuts off one of Satan's hands. This hand is what allows you to -use all the powers in the game. - -* Gameplay - -To accomplish each level, you will need to get to the final blue portal -under a certain time limit. You can beat a level by getting to the -portal before the time meter runs out or "Dominate" a level by beating -it within a shorter time limit (noted by a bright red/orange color in -the time meter). - -The portal is usually set behind locked gates, protected by dangerous -defenses, or in hard-to-reach places. To reach the portal, you'll need -to go through any existing orange portals, light all yellow beacons, -avoid things like fireballs and blades, or use any satanic power orbs -lying around. These special abilities include: - -- Gravity -- Teleport -- Rewind -- Spawn platform -- Roar (DLC) -- Rocket (DLC) -- Shadow world (DLC) - -For the main storyline, there are nine floors to beat. Each floor -contains nine regular levels, one boss level, and one bonus level; -although you don't technically need to beat all levels to advance to the -next floor. # In-Game Screenshots - -The main menu gives you plenty of options for tuning your system, playing main -levels, playing the downloadable content (DLC), or exploring the other game -modes. - -Once you enter a level, you can look around and strategize before -starting. Clicking any button will start the menu, and you'll have to -restart if you die. One of the great things about SEUM is that it has -great keyboard shortcuts. You can quickly smash =R= to restart the level -or =M= to return to the level menu. - -Once you're able to win a level, you'll see the high scores and can -watch replays of the best scores. - -Each regular level also contains a beer in a disguised location that may -take some out-of-the-box thinking. -#+date: <2021-01-04 Mon 00:00:00> -#+title: Navigating the Fediverse: User Manual for Decentralized Social Media -#+description: Detailed introduction to the Fediverse network architecture, user registration procedures, platform navigation, and protocols ensuring content decentralization and censorship resistance. -#+slug: fediverse - -* What is the Fediverse? - -The fediverse is a federated universe of servers commonly used for sharing -content, like social media. So, instead of having to rely on a single -organization to run the server (e.g. Facebook), the fediverse is a giant -collection of servers across the world, owned by many people and organizations. - -Take a look at this depiction of a federated network. Each server in this photo -is owned and run by different administrators/owners. Federated networks are best -explained as email servers: you have an email account that exists on a server -(e.g. Outlook), your friend has an account on a different server (e.g. GMail), -and another friend has an account on a third server (e.g. ProtonMail). All three -of you can talk and communicate back and forth without having to be on the same -server. However, responsible email admins are there to set rules and control the -traffic going in/out of the server. - -The main objective of this architecture is to decentralize the control within -the internet connections. For example, if you run your own Mastodon instance, -you and your users can't be censored or impacted in any way by authorities of -another Mastodon instance. Some users have praised these features due to recent -criticism of popular social media websites that may be over-censoring their -users. - -This strategy is great for making sure control of the social web isn't -controlled by a single organization, but it also has some downsides. If I create -a Mastodon instance and get a ton of users to sign up, I can shut the server -down at any time. That means you're at risk of losing the content you've created -unless you back it up, or the server backs it up for you. Also, depending on the -software used (e.g. Mastodon, Pixelfed, etc.), censorship may still be an issue -if the server admins decide they want to censor their users. Now, censorship -isn't always a bad thing and can even benefit the community as a whole, but -you'll want to determine which servers align with your idea of proper -censorship. - -However, these are risks that we take when we sign up for any online platform. -Whatever your reason is for trying out federated social networks, they are part -of the future of the internet. However, the popularity of these services is -still yet to be determined, especially with the increased difficulty -understanding and signing up for these platforms. Perhaps increased regulation -and litigation against current social media sites will push more users into the -fediverse. - -* Federated Alternatives to Popular Sites - -The list below is a small guide that will show you federated alternatives to -current popular websites. There are many more out there, so go and explore: you -might just find the perfect home. - -** Reddit - -- [[https://lemmy.ml/instances][Lemmy]] - -** Twitter/Facebook/Tumblr - -- [[https://joinmastodon.org][Mastodon]] -- [[https://diasporafoundation.org][Diaspora]] -- [[https://friendi.ca][Friendica]] -- [[https://gnusocial.network][GNU Social]] -- [[https://pleroma.social][Pleroma]] - -** Instagram - -- [[https://pixelfed.org][Pixelfed]] - -** Slack/Discord - -- [[https://element.io][Matrix]] - -** Youtube/Vimeo - -- [[https://joinpeertube.org][Peertube]] - -** Spotify/Soundcloud - -- [[https://funkwhale.audio][Funkwhale]] - -** Podcasting - -- [[https://pubcast.pub][Pubcast]] - -** Medium/Blogger - -- [[https://writefreely.org][WriteFreely]] - -* Get Started - -The best way to get started is to simply sign up and learn as you go. If you're -comfortable signing up through a Mastodon, Pleroma, or Friendica server, here is -[[https://fediverse.party/en/portal/servers][a list of themed servers]] to choose from. If you're looking for something else, -try a web search for a federated alternative to your favorite sites. - -Find a server that focuses on your passions and start there! -#+date: <2021-01-07 Thu 00:00:00> -#+title: Hardening Ubuntu Servers with UFW: A Step-by-Step Firewall Guide -#+description: Stepwise instructions for installation, configuration, enabling, and management of the Uncomplicated Firewall utility to secure network interfaces on Ubuntu server environments. -#+slug: ufw - -* Uncomplicated Firewall - -Uncomplicated Firewall (UFW) is a convenient and beginner-friendly -way to enforce operating system (OS)-level firewall rules. For those who are -hosting servers or any device that is accessible to the world (i.e., by public -IP or domain name), it's critical that a firewall is properly implemented and -active. - -UFW is available by default in all Ubuntu installations after 8.04 LTS -(long-term support). For other distributions, you can look to install UFW or -check if there are alternative firewalls installed already. There are usually -alternatives available, such as Fedora's =firewall= and the package available on -most distributions: =iptables=. UFW is considered a beginner-friendly front-end -to iptables. - -[[https://gufw.org][Gufw]] is available as a graphical user interface (GUI) application for users who -are uncomfortable setting up a firewall through a terminal. - -* Getting Help - -If you need help figuring out commands, remember that you can run the -=--help= flag to get a list of options. - -#+begin_src sh -sudo ufw --help -#+end_src - -* Set Default State - -The proper way to run a firewall is to set a strict default state and slowly -open up ports that you want to allow. This helps prevent anything malicious from -slipping through the cracks. The following command prevents all incoming traffic -(other than the rules we specify later), but you can also set this for outgoing -connections, if necessary. - -#+begin_src sh -sudo ufw default deny incoming -#+end_src - -You should also allow outgoing traffic if you want to allow the device to -communicate back to you or other parties. For example, media servers like Plex -need to be able to send out data related to streaming the media. - -#+begin_src sh -sudo ufw default allow outgoing -#+end_src - -* Adding Port Rules - -Now that we've disabled all incoming traffic by default, we need to open up some -ports (or else no traffic would be able to come in). If you need to be able to -=ssh= into the machine, you'll need to open up port 22. - -#+begin_src sh -sudo ufw allow 22 -#+end_src - -You can also issue more restrictive rules. The following rule will allow =ssh= -(secure shell protocol) connections only from machines on the local subnet. - -#+begin_src sh -sudo ufw allow proto tcp from 192.168.0.0/24 to any port 22 -#+end_src - -If you need to set a rule that isn't TCP (Transmission Control Protocol) just -append your connection type to the end of the rule. - -#+begin_src sh -sudo ufw allow 1900/udp -#+end_src - -* Enable ufw - -Now that the firewall is configured and ready to go, you can enable the -firewall. - -#+begin_src sh -sudo ufw enable -#+end_src - -A restart may be required for the firewall to begin operating. - -#+begin_src sh -sudo reboot now -#+end_src - -* Checking Status - -Now that the firewall is enabled, let's check and see what the rules look like. - -#+begin_src sh -sudo ufw status numbered -#+end_src - -#+begin_src txt -Status: active - - To Action From - -- ------ ---- -[ 1] 22 ALLOW IN Anywhere -[ 2] 22 (v6) ALLOW IN Anywhere (v6) -#+end_src - -* Deleting Rules - -If you need to delete a rule, you need to know the number associated with that -rule. Let's delete the first rule in the table above. You'll be asked to confirm -the deletion as part of this process. - -#+begin_src sh -sudo ufw delete 1 -#+end_src - -* Managing App Rules - -Luckily, there's a convenient way for installed applications to create files -that ufw can easily implement so that you don't have to search and find which -ports your application requires. To see if your device has any applications with -pre-installed UFW rules, execute the following command: - -#+begin_src sh -sudo ufw app list -#+end_src - -The results should look something like this: - -#+begin_src txt -Available applications: - OpenSSH - Samba - plexmediaserver - plexmediaserver-all - plexmediaserver-dlna -#+end_src - -If you want to get more information on a specific app rule, use the =info= -command. - -#+begin_src sh -sudo ufw app info plexmediaserver-dlna -#+end_src - -You'll get a blurb of info back like this: - -#+begin_src txt -Profile: plexmediaserver-dlna -Title: Plex Media Server (DLNA) -Description: The Plex Media Server (additional DLNA capability only) - -Ports: - 1900/udp - 32469/tcp -#+end_src - -You can add or delete app rules the same way that you'd add or delete specific -port rules. - -#+begin_src sh -sudo ufw allow plexmediaserver-dlna -#+end_src - -#+begin_src sh -sudo ufw delete RULE|NUM -#+end_src - -* Creating App Rules - -If you'd like to create you own app rule, you'll need to create a file in the -=/etc/ufw/applications.d= directory. Within the file you create, you need to -make sure the content is properly formatted. - -For example, here are the contents my =plexmediaserver= file, which creates -three distinct app rules for ufw: - -#+begin_src config -[plexmediaserver] -title=Plex Media Server (Standard) -description=The Plex Media Server -ports=32400/tcp|3005/tcp|5353/udp|8324/tcp|32410:32414/udp - -[plexmediaserver-dlna] -title=Plex Media Server (DLNA) -description=The Plex Media Server (additional DLNA capability only) -ports=1900/udp|32469/tcp - -[plexmediaserver-all] -title=Plex Media Server (Standard + DLNA) -description=The Plex Media Server (with additional DLNA capability) -ports=32400/tcp|3005/tcp|5353/udp|8324/tcp|32410:32414/udp|1900/udp|32469/tcp -#+end_src - -So, if I wanted to create a custom app rule called "mycustomrule," I'd create a -file and add my content like this: - -#+begin_src sh -sudo nano /etc/ufw/applications.d/mycustomrule -#+end_src - -#+begin_src config -[mycustomrule] -title=My Custom Rule -description=This is a temporary ufw app rule. -ports=88/tcp|9100/udp -#+end_src - -Then, I would just enable this rule in ufw. - -#+begin_src sh -sudo ufw allow mycustomrule -#+end_src -#+date: <2021-02-19 Fri 00:00:00> -#+title: macOS for Linux Users: Initial Setup and CLI Customization -#+description: Comprehensive overview for first-time macOS users transitioning from other OS platforms, including system setup, terminal usage, and user interface customization. -#+slug: macos - -* Diving into macOS - -After spending nearly 15 years working with Windows and 8 years on Linux, I have -experienced macOS for the first time. By chance, my spouse happened to buy a new -MacBook and gifted me their 2013 model. Of course, I still consider my Linux -desktop to be my daily driver and keep Windows around for gaming needs, but over -the past week I've found myself using the MacBook more and more for things that -don't require gaming specs or advanced developer tools. - -* Initial Thoughts - -Before I move on to the technical aspects of my set-up, I want to take some time -and express my thoughts on the overall operating system (OS). - -As expected, the initial computer setup is a breeze with Mac's guided graphical -user interface (GUI) installer. - -The desktop itself reminds me of GNOME more than anything else I've seen: even -Pantheon from [[https://elementary.io/][ElementaryOS]], which people commonly refer to as the closest Linux -distro to macOS. The desktop toolbar is great and far surpasses the utility of -the GNOME toolbar due to the fact that the extensions and icons /actually work/. -I launch macOS and immediately see my shortcuts for Tresorit, Bitwarden, and -Mullvad pop up as the computer loads. - -Even further, the app dock is very useful and will be yet another familiarity -for GNOME users. I know many people like panels instead of docks, but I've -always found docks to have a more pleasing UI. However, I had to disable the -"Show recent applications in Dock" preference; I can't stand items taking up -precious screen space if I'm not currently using them. On that same note, it's -taking me some time to get use to the fact that I have to manually quit an app -or else it will still stay open/active in the dock, even if I've closed out all -windows for that app (e.g. Firefox). - -Overall, I'm having a lot of fun and for users who spend a large majority of -their time performing basic tasks like web browsing, writing, watching media, -etc., macOS is a fantastic option. - -The rest of this post explains the technicalities of how I set up my command -line interface (CLI) environment to make me feel more at-home, similar to the -environments I set up on Fedora, Ubuntu, etc. - -* Making it Feel Like Home - -If you're someone who uses Linux primarily, no doubt your first thought when -booting macOS will be the same as mine was: "Where is the terminal and how do I -set up my favorite utilities?" - -Luckily, macOS hasn't completely hidden away the development tools from the -average user. You can easily find the Terminal app in the Launchpad area, but -it's probably not what you're used to. I was surprised (and happy) to see that -the default shell is =zsh=, the shell I use on all of my Linux distros. However, -the commands are not the same - even the ones you may think are native to the -shell. Commands like =dir= do not exist, so other native commands like =ls -la= -or =pwd= are more useful here. - -With only a few minutes of installing and tweaking a few packages, I was able to -recreate a terminal environment that I feel very comfortable using. See the -image below for a preview of the iTerm2 app with a split view between my macOS -desktop shell and an SSH (secure shell protocol) session into my server. - -* Xcode - -My first step was to search the web for any hints on how to get =zsh= back up to -the state I like, with extensions, themes, etc. My first step was to install the -CLI tools for [[https://developer.apple.com/xcode/][Xcode]], Apple's suite of development tools. - -#+begin_src sh -sudo xcode-select -r -#+end_src - -#+begin_src sh -sudo xcode-select --install -#+end_src - -* Homebrew - -Next up is to install [[https://brew.sh][Homebrew]], a nifty package manager for macOS. - -#+begin_src sh -/bin/bash -c "$(curl -fsSL -https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" -#+end_src - -I ran into a permission error when installing Homebrew: - -#+begin_src sh -Error: Failed to link all completions, docs and manpages: Permission denied @ - rb_file_s_symlink - (../../../Homebrew/completions/zsh/_brew, - /usr/local/share/zsh/site-functions/_brew) Failed during: - /usr/local/bin/brew update --force --quiet -#+end_src - -I found that the following permission modification worked like a charm. However, -I noted that some users online discussed the fact that this solution may not -work if your system has multiple users who use Homebrew. - -#+begin_src sh -sudo chown -R $(whoami) $(brew --prefix)/* -#+end_src - -Next up is to ensure Homebrew is updated and cleaned. - -#+begin_src sh -brew update -#+end_src - -#+begin_src sh -brew cleanup -#+end_src - -* iTerm2 - -Now that I've installed the basic utilities for development, I moved onto -installing iTerm2, a much better terminal than the default. - -#+begin_src sh -brew install --cask iterm2 -#+end_src - -I also used the =Make iTerm2 Default Term= and =Install Shell Integration= -options in the iTerm2 application menu to make sure I don't run into any issues -later on with different terminals. - -We will also install =zsh= so we can use it in iTerm2. - -#+begin_src sh -brew install zsh -#+end_src - -* Oh-My-Zsh - -I've shown the great aspects of [[https://ohmyz.sh][Oh My Zsh]] in other blog posts, so I'll skip over -that speech for now. Simply install it and run an update. - -#+begin_src sh -sh -c "$(curl -fsSL -https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)" -#+end_src - -#+begin_src sh -omz update -#+end_src - -Finally, restart the iTerm2 application to ensure all changes go into effect. - -* Oh-My-Zsh Themes - -Let's change the theme of the terminal to make it a little more friendly. - -#+begin_src sh -open ~/.zshrc -#+end_src - -The third section of this file should contain a line like the code below. Change -that theme to [[https://github.com/ohmyzsh/ohmyzsh/wiki/Themes][any theme you want]], save the file, and exit. - -#+begin_src sh -ZSH_THEME="af-magic" -#+end_src - -After changing the =.zshrc= file, you'll need to close your terminal and re-open -it to see the changes. Optionally, just open a new tab if you're using iTerm2, -and you'll see the new shell config. - -* Oh-My-Zsh Plugins - -Of course, my customization of =zsh= would not be complete without -[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]]. This will bring up commands you've run in the past as you -type them. For example, if you've run =ssh [email protected]= before, the -terminal will show this command as soon as you start typing it (e.g. =zsh u=), -and you can hit the right arrow to autocomplete the command. - -#+begin_src sh -git clone https://github.com/zsh-users/zsh-autosuggestions -${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions -#+end_src - -#+begin_src sh -open ~/.zshrc -#+end_src - -#+begin_src sh -# Scroll down the script and edit this line to add zsh-autosuggestions -plugins=(git zsh-autosuggestions) -#+end_src - -Remember: After changing the =.zshrc= file, you'll need to close your terminal -and re-open it to see the changes. Optionally, just open a new tab if you're -using iTerm2, and you'll see the new shell config. -#+date: <2021-03-19 Fri 00:00:00> -#+title: GitHub and Sourcehut: Scripting Mass Clones and Remote Updates -#+description: Script-based methodology for cloning multiple repositories from GitHub and Sourcehut accounts. Includes automation techniques to streamline repository management and backups. -#+slug: clone-github-repos - -* Cloning from GitHub - -If you're like me and use a lot of different devices [and sometimes decide to -just wipe your device and start with a new operating system (OS)], you probably know -the pain of cloning all your old code repositories down to your local file -system. - -If you're using GitHub, you can easily clone all of your code back down in just -seconds. First, create a bash script. I do so by opening a new file in =nano=, -but you can use =gedit=, =vim=, or something else: - -#+begin_src sh -nano clone_github_repos.sh -#+end_src - -Next, paste in the following information. Note that you can replace the -word =users= in the first line with =orgs= and type an organization's -name instead of a user's name. - -#+begin_src sh -CNTX=users; NAME=YOUR-USERNAME; PAGE=1 -curl "https://api.github.com/$CNTX/$NAME/repos?page=$PAGE&per_page=100" | - grep -e 'git_url*' | - cut -d " -f 4 | - xargs -L1 git clone -#+end_src - -Finally, save the bash script and make it executable. - -#+begin_src sh -chmod a+x clone_github_repos.sh -#+end_src - -Now you can run the script and should see the cloning process begin. - -#+begin_src sh -./clone_github_repos.sh -#+end_src - -* Cloning from Sourcehut - -I haven't fully figured out how to directly incorporate Sourcehut's GraphQL -application programming interface (API) into a bash script yet, so this one will -take two steps. - -First, log-in to Sourcehut and go to their [[https://git.sr.ht/graphql][GraphQL playground for Git]]. Next, -paste the following query into the left box: - -#+begin_src sh -query { - me { - canonicalName - repositories() { - cursor - results { - name - } - } - } -} -#+end_src - -The output on the right side will give you an object of all your repositories. -Just grab that text and remove all the characters such as quotation marks and -curly brackets. You will need a single-line list of space-separated values for -the next step. - -Now let's create the bash script: - -#+begin_src sh -nano clone_sourcehut_repos.sh -#+end_src - -Next, paste the following bash script in with the list of repositories you -obtained above and replace =your-username= with your username. - -Note that this uses the secure shell protocol (SSH)-based Git cloning method -(e.g. =git@git...=), so you'll need to ensure you have set up Sourcehut with -your SSH key. - -#+begin_src sh -repos=(repo1 repo2 repo3) - -# List all sub-directories in the current directory -for repo in "${repos[@]}" -do - # Clone - git clone [email protected]:~your-username/$repo -done -#+end_src - -Finally, save the bash script and make it executable. - -#+begin_src sh -chmod a+x clone_sourcehut_repos.sh -#+end_src - -Now you can run the script and should see the cloning process begin. - -#+begin_src sh -./clone_sourcehut_repos.sh -#+end_src - -* Moving Repositories to a New Host - -Now that you have all of your code repositories cloned to your local computer, -you may want to change the remote host (e.g., moving from GitHub to GitLab). To -do this, let's create another bash script: - -#+begin_src sh -nano change_remote_urls.sh -#+end_src - -Past the following information and be sure to change the URL (uniform resource -locator) information to whichever host you are moving to. For this example, I am -looping through all of my cloned GitHub directories and changing them to -Sourcehut (e.g. =<YOUR_NEW_REMOTE_URL>= -> [email protected]:~myusername=). - -#+begin_src sh -# List all sub-directories in the current directory -for dir in */ -do - # Remove the trailing "/" - dir=${dir%*/} - # Enter sub-directory - cd $dir - # Change remote Git URL - git remote set-url origin <YOUR_NEW_REMOTE_URL>/"${dir##*/}" - # Push code to new remote - git push - # Go back to main directory - cd .. -done -#+end_src - -Finally, save the bash script and make it executable. - -#+begin_src sh -chmod a+x change_remote_urls.sh -#+end_src - -Now you can run the script and should see the cloning process begin. - -#+begin_src sh -./change_remote_urls.sh -#+end_src -#+date: <2021-03-28 Sun 00:00:00> -#+title: Getting Started with Gemini: Deploy Your First Capsule -#+description: Incremental procedural guide to initiate and maintain a Gemini capsule server. Covers installation, deployment, and operational best practices for beginners. -#+slug: gemini-capsule - -* What is Gemini? - -[[https://gemini.circumlunar.space/][Gemini]] is an internet protocol introduced in June 2019 as an alternative to the -Hypertext Transfer Protocol (HTTP) or Gopher. In layman's terms, it's an -alternative way to browse sites (called capsules) that requires a special -browser. Since Gemini is not standardized as an internet standard, normal web -browsers won't be able to load a Gemini capsule. Instead, you'll need to use [[https://gemini.circumlunar.space/clients.html][a -Gemini-specific browser]]. - -The content found within a Gemini page is called [[https://gemini.circumlunar.space/docs/cheatsheet.gmi][Gemtext]] and is /extremely/ -basic (on purpose). Gemini only processes the text, no media content like -images. However, you're able to style 3 levels of headings, regular text, links -(which will display on their own line), quotes, and an unordered list. - -Here's a complete listing of valid Gemtext: - -#+begin_src txt -# Heading 1 -## Heading 2 -### Heading 3 - -Regular text! Lorem ipsum dolor sit amet. - -=> https://example.com My Website -=> gemini://example.com My Gemini Capsule - -> "If life were predictable it would cease to be life, and be without flavor." - Eleanor Roosevelt - -My List: -,** Item -,** Item - -```Anything between three backticks will be rendered as code.``` -#+end_src - -*** Free Option - -There are probably numerous websites that allow you to create your personal -Gemini capsule, but I'm going to focus on the two sites that I have personally -tested. The first option below, Midnight Pub, allows you to create/edit any -Gemini files you want in your account. This is essentially a graphical option -with a built-in text box for editing. The second option below, Sourcehut, allows -you to use a Git repository and automatic build process to deploy your personal -Gemini capsule every time you push a commit. - -** Midnight Pub - Beginner Friendly - -[[https://midnight.pub/][Midnight Pub]] is a small, virtual community meant to reflect the atmosphere of -wandering into a small alley pub. The site is built in Gemtext and has a -server-side process to convert Gemtext to HTML if someone loads the site in an -HTTP(S) browser. - -To create an account, you'll need to email the owner of the website to obtain a -key. You can find their email on the Midnight Pub homepage. Once registered, -head to [[https://midnight.pub/account][your account]] and select [[https://midnight.pub/site][manage site]]. This is the screen where you can -upload or create any files to be displayed on the internet. - -For example, I've created both a Hypertext Markup Language (HTML) file and a -Gemini file. Remember that Gemini is automatically converted to HTML on the Pub, -so you don't need an HTML version. For example, I created an HTML version to add -in some extra styling. - -All you need to do is create a page like =index.gmi= and use your Gemini browser -to head over to your-username.midnight.pub to see the result. - -That's all there is to it! Easy enough, right? Let's check out a more advanced -version in the next section. - -* Paid Option - -As of 2021, Sourcehut has decided to require users to have a paid account in -order to utilize their automated build system. For now, paid accounts can be as -low as $2/month. - -** Sourcehut - -[[https://sourcehut.org/][Sourcehut]] is a collection of software development tools, but mostly surrounds -their hosted Git repository service. Simply put, it's a minimal and more private -alternative to services like GitHub. - -This walkthrough is more advanced and involves things like Git, SSH, the command -line. If you don't think you know enough to do this, check out my walkthrough on -creating a Gemini capsule for the Midnight Pub instead. - -The first thing you'll need to do is create an SSH key pair, if you don't -already have one on your system. Once created, grab the contents of =id_rsa.pub= -and add it to your Sourcehut account settings - this will allow you to push and -pull code changes without using a username/password. - -#+begin_src sh -ssh keygen -#+end_src - -Next up, let's create a repository with the proper name so that the Sourcehut -build system will know we want them to host a website for us. Use the following -format exactly: - -#+begin_src sh -mkdir your-username.srht.site && cd your-username.srht.site -#+end_src - -Now that we've created the repo, let's initialize Git and add the proper remote -URL. - -#+begin_src sh -git init -#+end_src - -#+begin_src sh -git remote add origin [email protected]:~your-username/your-username.srht.site -#+end_src - -Now that our repository is set up and configured, we will need to create at -least two files: - -- =index.gmi= -- =.build.yml= - -For your =.build.yml= file, use the following content and be sure to update the -=site= line with your username! - -#+begin_src yaml -image: alpine/latest -oauth: pages.sr.ht/PAGES:RW -environment: - site: your-username.srht.site -tasks: - - package: | - cd $site - tar -cvz . > ../site.tar.gz - - upload: | - acurl -f https://pages.sr.ht/publish/$site [email protected] -Fprotocol=GEMINI -#+end_src - -For the =index.gmi= file, put whatever you want in there and save it. You could -even just copy and paste the Gemtext cheatsheet. - -If you want to serve both HTML and Gemini files from this repository, just add a -second command to the =upload= section: - -#+begin_src yaml -- upload: | - acurl -f https://pages.sr.ht/publish/$site [email protected] -Fprotocol=GEMINI - acurl -f https://pages.sr.ht/publish/$site [email protected] -#+end_src - -Lastly, commit your changes and push them to the remote repo. - -#+begin_src sh -git add .; git commit -m "initial commit"; git push --set-upstream origin HEAD -#+end_src - -If you've successfully created the files with the proper format, you'll see the -terminal print a message that lets you know where the automatic build is taking -place. For example, here's what the terminal tells me: - -#+begin_src sh -remote: Build started: -remote: https://builds.sr.ht/~user/job/689803 [.build.yml] -#+end_src - -Now that you've properly built your Sourcehut page, you can browse to -your-username.srht.site in a Gemini browser and view the final results. -#+date: <2021-03-28 Sun 00:00:00> -#+title: Exploring Vaporwave and Outrun: Color, Culture, and Sound -#+description: Systematic examination of Vaporwave and Outrun aesthetic frameworks, focusing on graphical elements, chromatic schemes, musical associations, and period-specific cultural influences. -#+slug: vaporwave-vs-outrun - -* Overview - -When it comes to an aesthetic that originated primarily online, there tends to -be a lot of confusion around what falls into each specific genre. This post -discusses Vaporwave and Outrun, which have become almost synonymous in the minds -of those online who aren't hardcore into these genres of media. More -specifically, Outrun is largely an unknown term while all aesthetics in these -two genres are usually attributed to Vaporwave. For example, take a look at the -image search results for Vaporwave: the results include *a lot* of Outrun-themed -images. You'll find a similar trend almost everywhere. - -#+caption: Vaporwave Search Results -#+attr_html: :alt Search engine results for vaporwave, showing many outrun-related images. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/vaporwave-search-results.webp]] - -* Vaporwave - -#+caption: Macintosh Plus Album Cover -#+attr_html: :alt Album cover of the Macintosh Plus album. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/macintosh-plus.webp]] - -Okay, so what is Vaporwave? I'm going to just copy-and-paste some general info -from the Wikipedia article on [[https://en.wikipedia.org/wiki/Vaporwave][Vaporwave]], so that I'm not repeating everything -you can already search for online: - -#+begin_quote -Vaporwave is a microgenre of electronic music, a visual art style, and an -Internet meme that emerged in the early 2010s. It is defined partly by its -slowed-down, chopped and screwed samples of smooth jazz, elevator, R&B, and -lounge music from the 1980s and 1990s. The surrounding subculture is sometimes -associated with an ambiguous or satirical take on consumer capitalism and pop -culture, and tends to be characterized by a nostalgic or surrealist engagement -with the popular entertainment, technology and advertising of previous decades. -Visually, it incorporates early Internet imagery, late 1990s web design, glitch -art, anime, 3D-rendered objects, and cyberpunk tropes in its cover artwork and -music videos. -#+end_quote - -This is an excellent summary, and it helps address my point here: there are -specific aspects that make Vaporwave unique: - -** Time Frame - -The time frame for references, logos, etc. focuses mostly on the 1990s in -Vaporwave. You'll see old school Pepsi logos, Microsoft 95 screens, tropical -plants, classic marble sculptures, and many references from Japan's influence in -the 90s. - -** Art - -The color scheme is generally a soft, light palette that uses pastel colors. The -backdrop will often be in a light-pink or teal blue. - -** Music - -The musical genre of Vaporwave incorporates soft tunes, lounge music, and sound -effects that will make the listener reminisce of the 90s. The sounds of the -genre are generally slower-paced and calming. The major breakthrough artist for -Vaporwave was [[https://en.wikipedia.org/wiki/Vektroid][Macintosh Plus]], who released the album [[https://archive.org/details/MACINTOSHPLUS-FLORALSHOPPE_complete][Floral Shoppe]] in 2011. -Another more recent example is the artist [[https://sadbert.bandcamp.com/][sadbert]], whose latest album -incorporates the upbeat tones of the 1999 Dilbert television series. - -Notice that Vaporwave doesn't include things like racing cars, futuristic -technology, chrome, or the deep orange/purple color scheme. Vaporwave is a focus -on the idyllic state of the world when technology was becoming common in -households, a reality that we have already experienced. Focus on the most -aesthetically-pleasing parts of that past is a large part of Vaporwave. - -* Outrun - -#+caption: Outrun -#+attr_html: :alt The classic outrun picture with digital hills and a grid leading to a far-away sunset. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/outrun.jpg]] - -Now, let's get to Outrun. This one is a little trickier since the genre has -largely been lumped under the Vaporwave title for so long. However, it stems -from the [[https://en.wikipedia.org/wiki/Synthwave][Synthwave]] music genre and is likely named after the 1986 racer game, -[[https://en.wikipedia.org/wiki/Out_Run][Out Run]]. - -** Time Frame - -Outrun can be thought of as a retro-futuristic aesthetic born from the 1980s. - -** Art - -The color scheme uses a very dark color palette with the main colors being deep -oranges, blues, and purples. Red edges are common around objects in Outrun art. -The background of the Outrun aesthetic is almost always a neon grid like you'd -expect to see in Tron or a 1980s arcade machine. - -Classic sports cars, chrome robots, computer generated graphics and fonts, and -the occasional use of rain or palm trees can be found in Outrun art. - -** Music - -This aesthetic has a more aggressive and fast-paced style of music, which tends -to match the subject of the art in this aesthetic. - -Outrun enthusiasts love what people in the 1980s thought the future would look -like. Take a look at a common video game discussed in Outrun circles, Far Cry 3: -Blood Dragon: - -#+caption: Fry Cry 3: Blood Dragon -#+attr_html: :alt The game cover for Far Cary 3: Blood Dragon, showing ninjas, lasers, dinosaurs, and cyborgs. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/far-cry.jpg]] - -Another example that doesn't force the color scheme as hard as some online art -does is Kung Fury: - -#+caption: Kung Fury -#+attr_html: :alt The movie cover for Kung Fury, showing the proteagonist in a city at night with a moon. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/kung-fury.webp]] - -#+caption: Kung Fury Hacker Scene -#+attr_html: :alt The HACKERMAN scene from Kung Fury, showing a classic 1980's hacker in a computer room. -[[https://img.cleberg.net/blog/20210328-vaporwave-vs-outrun/kung-fury-hacker.webp]] - -* Conclusion - -While Vaporwave and Outrun share similarities, they are two distinct aesthetics -with many important distinctions. Someone who enjoys one may not necessarily -enjoy the other, so it's important to make sure we properly describe the -aesthetic we're looking for. -#+date: <2021-03-30 Tue 00:00:00> -#+title: From Shared Hosting to VPS: Web Server Setup Made Easy -#+description: Instructional outline for setting up and maintaining a VPS environment configured for secure and scalable web hosting applications. -#+slug: vps-web-server - -* Shared Hosting vs. VPS (Virtual Private Server) - -Choosing a place to host a website is one of the most confusing decisions for -beginner web developers. Even for experienced web devs, choosing between -different forms of web hosting can be a daunting choice. - -First, let's take a look at [[https://en.wikipedia.org/wiki/Shared_web_hosting_service][shared web hosting]]. Shared web hosting is a product -where you are purchasing a small piece of a web server that is being shared -between many websites. As a result, the cost of shared hosting is extremely low. -You won't have access to the server itself, which means you can't install your -own software on the server, such as Docker. Usually, you are simply allowed to -connect your domains to the server, set up domain security, and other small -utilities. - -In contrast, a [[https://en.wikipedia.org/wiki/Virtual_private_server][virtual private server]] (VPS) is a virtual machine that replicates -the environment of having a dedicated server to yourself. You are able to -control the virtual server's host names, base file system, package manager, etc. -Another great upside of a VPS is that since it's virtual, the company providing -the VPS can dynamically increase the disk size, RAM size, or number of CPUs at -any time. However, the virtual server is still physically located on a server -that is shared between multiple virtual servers. - -The choice between shared hosting and VPS mostly depends on your skill level -with system administration. If you're comforting working on a server that is -mostly left up to you (or you're willing to learn), then a VPS is usually a -better option. However, shared hosting is a fantastic option for people who -don't want to have to learn how to manage their server. - -* My Situation - -I had used shared hosting for approximately 5 years before trying my first VPS. -I manage a homelab and have had success running a server and performing typical -sysadmin duties, but I was still hesitant to get a VPS. One fear was that I -always struggled to properly set up the networking part of a server - DNS and -hostname configurations were not my friend. - -As a little bit of background, I originally used [[https://www.siteground.com][Siteground]] for my initially -shared hosting and stayed on that platform for at least a year. However, the -user interface (UI) was clunky, and I didn't like how they handled certain -technical aspects, so I switched to [[https://www.namecheap.com][Namecheap]]. Namecheap was great because it is -the service I primarily use for purchasing domain names, which made it -incredibly easy to link them to my hosting service. However, it was still -mediocre shared hosting, and Namecheap is notorious for not letting you use -[[https://letsencrypt.org][Let's Encrypt]] to obtain free SSL (Secure Socket Layer)/TLS (Transport Layer -Security) certificates; Namecheap wants to make you purchase certificates -through their store. - -Finally, I settled down with [[https://www.iwebfusion.net][iWebFusion]] for about the last year of my shared -hosting. This service was pretty great, came with free SSL/TLS, and I never had -any complaints. - -However, I finally grew tired of not being able to install software on my own -web server. I wanted to be able to try out things like [[https://postmill.xyz][Postmill]] or [[https://matrix.org][Matrix]]. This -is possible with a VPS, so I decided to grab a new domain name to try it out. - -* Getting Started: Buying a VPS - -The first step to moving over to a VPS is (you guessed it): finding a VPS -provider. For my VPSs, I use [[https://1984hosting.com][1984]] and prefer their services much more than any -alternative, due to their location (Iceland), their [[https://1984hosting.com/GDPR/][privacy policy]], their -respect for GDPR, and the ability to remain anonymous if you pay in Bitcoin or -Monero. - -[[https://njal.la][Njalla]] is another good, privacy-oriented option for VPS services. - -You'll have to decide what specifications you want on your VPS. For me, I only -build and deploy low-resource HTML, PHP, and Python websites. This means I can -survive on the smallest VPS: 1 CPU, 1GB of RAM, and 25GB SSD for $5.00 per -month. - -As noted above, the great thing about a VPS is you can request your provider to -increase the resources at any time. - -* Configuring DNS Settings - -Okay, so now let's get into some actual work that has to be done to get content -moved from a shared host to a VPS. At this point, I'm assuming you have a shared -host with website content that you can still access, and you've purchased a new -VPS and can SSH into that server. - -The first change is minor, but it should be done immediately in order to get -things moving: DNS settings. Go to wherever your DNS settings are handled. If -your shared host also managed your DNS settings, you'll need to first move that -DNS over to your new VPS provider. For me, I route my DNS through [[https://www.gandi.net][Gandi]]. - -Once you know where your DNS settings are, go ahead and update the =A= records -to match the public IP address of your VPS. For example: - -#+begin_src txt -A example.com xxx.xxx.xxx.xxx -A subdomain xxx.xxx.xxx.xxx -CNAME www example.com. -#+end_src - -If you have any other records that require updates, such as MX or TXT records -for a mail server, be sure to update those accordingly. Personally, I don't host -my own mail server. I route all mail on my custom domains to [[https://www.migadu.com][Migadu]]. Hosting -your own email server can become complex quickly and is not for beginners. - -DNS changes can take up to 48 hours to propagate, so be sure to give it some -time before assuming you've made an error. - -* Server Updates and Packages - -Now that the DNS settings have been changed, let's set up our server while we -wait for the DNS to propagate. First up is to ssh into your server. If you've -signed up with a service like DigitalOcean, you can add your SSH key to your -account and to your VPS droplet so that you don't need a password in order to -SSH. - -#+begin_src sh -ssh [email protected] -#+end_src - -The VPS that is used in this blog post runs Ubuntu 20.04 with an Apache web -server. If you're working on a different operating system (OS) or want a -different web server, such as Nginx, you'll have to use different commands to -set it up. - -First, let's update and upgrade our server. - -*NOTE:* Since we have logged in to the server as =root= for now, we don't need -to use the =sudo= modifier before our commands. - -#+begin_src sh -apt update && apt upgrade -y -#+end_src - -* Create A User Account - -While being able to use =root= can be beneficial at times, you shouldn't use -=root= unless you have to. - -So let's set up a new user in our system. The =-m= option below tells the OS to -create a home directory for the new user. - -#+begin_src sh -adduser USERNAME -#+end_src - -Now, create a password for that user. - -#+begin_src sh -passwd USERNAME -#+end_src - -Finally, add the user to the sudoers file, so they can perform privileged -commands. - -#+begin_src sh -usermod -a -G sudo USERNAME -#+end_src - -If you are using SSH (secure shell protocol) keys and not passwords, you'll need -to copy your SSH key from your local machine to the VPS. If you haven't disabled -password-based SSH yet, the easiest way to do this is =ssh-copy-id= from your -local computer (not from the VPS): - -#+begin_src sh -ssh-copy-id [email protected] -#+end_src - -If you've disabled password-based SSH, you'll need to manually copy your SSH key -into the =~/.ssh/authorized_keys= file. - -* Install Software - -Our goal here is to host a web server, so the next step is to install the Apache -web server and any other packages we need. - -From this point on, I will be logged in as a user (not =root=) and will need to -use the =sudo= modifier for most commands. - -#+begin_src sh -sudo apt update; sudo apt upgrade -y; sudo apt autoremove -y -sudo apt install apache2 -#+end_src - -If you need other language support, such as PHP, you'll need to install that -too. - -#+begin_src sh -sudo apt install libapache2-mod-php php-dom -sudo a2enmod php -sudo systemctl restart apache2 -#+end_src - -* Website Files & Folders - -Next up is to create the directories for the domain(s) we want to be hosted on -this web server. - -#+begin_src sh -cd /var/www -sudo mkdir example.com -#+end_src - -We have a folder for =example.com= now, so let's add an =index.html= file and -put it within a specific =public_html= folder. You don't need this =public_html= -if you don't want it, but it helps with organizing items related to -=example.com= that you don't want to publish to the internet. - -#+begin_src sh -cd example.com -sudo mkdir public_html && cd public_html -sudo nano index.html -#+end_src - -You can put anything you want in this =index.html= file. If you can't think of -anything, paste this in there: - -#+begin_src html -<!DOCTYPE html> -<html lang="en"> - <head> - <meta charset="utf-8" /> - <meta name="viewport" content="width=device-width, initial-scale=1" /> - <title>Hello, world!</title> - </head> - <body> - <h1>Hello, world!</h1> - </body> -</html> -#+end_src - -If you want something to be served at =example.com/page01/file.txt=, you'll have -to create the =page01= directory under the =example.com= directory. For example: - -#+begin_src sh -cd /var/www/example.com/public_html -sudo mkdir page01 -sudo nano file.txt -#+end_src - -* Apache Configuration - -Now, let's set up the files that will tell the server where to find the files -for =example.com=. We will copy the default configuration file and create our -own. - -#+begin_src sh -cd /etc/apache2/sites-available -sudo cp 000-default.conf example.com.conf -sudo nano example.com.conf -#+end_src - -This configuration file will have a few default lines, but you'll need to edit -it to look similar to this (settings may change based on your personal needs): - -#+begin_src config -<VirtualHost *:80> - ServerAdmin [email protected] - ServerName example.com - ServerAlias www.example.com - DocumentRoot /var/www/example.com/public_html - ErrorLog ${APACHE_LOG_DIR}/error.log - CustomLog ${APACHE_LOG_DIR}/access.log combined -</VirtualHost> -#+end_src - -Now, enable the configuration for your new site, disable the default -configuration, and reload the web server. - -#+begin_src sh -sudo a2ensite example.com.conf -sudo a2dissite 000-default.conf -sudo systemctl reload apache2 -#+end_src - -You can always run a test to make sure no errors or warnings are found in your -configuration files. - -#+begin_src sh -sudo apache2ctl configtest -#+end_src - -Now, restart the web server entirely. After this, you should be able to browse -to =http://example.com= and see the HTML (hypertext markup language) content you -provided earlier. Note that SSL/TLS has not been enabled yet, so you won't be -able to use the secure version yet (=https://example.com=). - -#+begin_src sh -sudo systemctl restart apache2 -#+end_src - -You can repeat this for as many websites as you need. Just create the domain -folders in =/var/www/=, add the configuration file, enable the configuration, -and restart =apache2=. - -* SSL/TLS Certificates: Serve Websites Over HTTPS - -In order to serve secure content, you'll need to obtain SSL/TLS certificates. -Luckily, there's a free tool called [[https://certbot.eff.org][Certbot]] that helps us with the process. - -The first step is to install =snapd= and =core= for Ubuntu. - -#+begin_src sh -sudo apt install snapd -sudo snap install core -sudo snap refresh core -#+end_src - -Next, install the =certbot= snap package. - -#+begin_src sh -sudo snap install --classic certbot -#+end_src - -Execute the following command to ensure that the =certbot= command can -be run. - -#+begin_src sh -sudo ln -s /snap/bin/certbot /usr/bin/certbot -#+end_src - -Finally, you can run =certbot= one of two ways: - -1. run it and let it alter your Apache configuration files automatically to - enable HTTPS (Hypertext Transport Protocol) redirects. -2. run it and only allow it to create certificates. You'll need to manually - alter the config files to enable HTTPS redirects. - -Run certbot and allow automatic config changes: - -#+begin_src sh -sudo certbot --apache -#+end_src - -Run certbot for certificates only and don't allow it to alter config -files: - -#+begin_src sh -sudo certbot certonly --apache -#+end_src - -The Certbot packages on your system come with a =cron= job or =systemd= timer -that will renew your certificates automatically before they expire. You will not -need to run Certbot again unless you change your configuration. You can test -automatic renewal for your certificates by running this command: - -#+begin_src sh -sudo certbot renew --dry-run -#+end_src - -Now, test your domains by going to =https://example.com=. - -* Firewall Security - -To enable better security on your server, you'll need to enable a basic -firewall. For Ubuntu, we'll use [[https://cleberg.net/blog/ufw.html][the uncomplicated firewall]]. - -Now, add the following rules to the firewall allow SSH, Apache, and HTTP(S) -connections. If you need to, you can enable different ports for specific -applications. - -#+begin_src sh -sudo ufw default deny incoming -sudo ufw default allow outgoing -sudo ufw allow OpenSSH -sudo ufw allow Apache -sudo ufw allow proto tcp from any to any port 80,443 -#+end_src - -Once you've added all the rules you need, enable the firewall. - -#+begin_src sh -sudo ufw enable -#+end_src - -* Troubleshooting - -If you run into any issues during your VPS set-up, be sure to walk back through -your actions and make sure you didn't miss any steps. - -Many websites have fantastic guides to setting up various web servers. This is -one of the areas [[https://www.digitalocean.com/community/tutorials][where DigitalOcean shines]]. For simpler or more Linux-oriented -questions, I suggest using [Linuxize] ([[https://linuxize.com]]). - -If you're getting certain errors (e.g. =500 Internal Server Error=) and need to -debug locally, you can view the =access.log= and =error.log= files in the -=/var/log/apache/= directory. -#+date: <2021-04-17 Sat 00:00:00> -#+title: Agate Gemini Server Installation and Firewall Configuration -#+description: Detailed directives for installation and configuration of a Gemini protocol server on Ubuntu, including network security and firewall setup. -#+slug: gemini-server - -* Similar Article Available - -To read more about Gemini and ways to test out this new protocol without your -own server, see my previous post [[../launching-a-gemini-capsule/][Launching a Gemini Capsule]]. - -* Preparation - -This guide assumes you have access to a server accessible to the world through a -public IP (internet protocol) address and that you own a domain name used for -this Gemini capsule. - -* Getting Started with Agate - -We are going to use [[https://github.com/mbrubeck/agate][Agate]] for this tutorial. This is a basic Gemini server -written in Rust. It takes very little time and maintenance to get it running. - -* Install Dependencies - -First, you will need to install the Rust package for your system. On Ubuntu, use -the following commands (remember to use =sudo= if you are not the root user). -The Rust installation will give you options to customize the installation; I -used the default installation options. - -#+begin_src sh -sudo apt update && sudo apt upgrade -y -curl https://sh.rustup.rs -sSf | sh -#+end_src - -Remember to configure your shell with the new configuration: - -#+begin_src sh -source $HOME/.cargo/env -#+end_src - -Before we install agate, make sure you have the =gcc= package installed: - -#+begin_src sh -sudo apt install gcc -#+end_src - -Next, you'll need to install the agate executable with Rust's Cargo -package maintainer: - -#+begin_src sh -cargo install agate -#+end_src - -* Create Symlinks - -Once Cargo has finished installing all the required packages, create a symbolic -link to the executable to your $PATH. - -#+begin_src sh -sudo ln -s $HOME/.cargo/bin/agate /usr/local/bin/agate -#+end_src - -* Using Agate's Built-In Installation Tool - -If you're running Ubuntu or Debian, use the Debian installation script found in -Agate's GitHub repository, under the =tools/debian= folder. - -#+begin_src sh -git clone https://github.com/mbrubeck/agate -cd agate/tools/debian -sudo ./install.sh -#+end_src - -* Configure the Gemini Service - -We have a little more to do, but since this script tries to immediately run the -service, it will likely fail with an exit code. Let's add our finishing touches. -Edit the following file and replace the hostname with your desired URL (uniform -resource locator). You can also change the directory where content will be -served. - -#+begin_src sh -sudo nano /etc/systemd/system/gemini.service -#+end_src - -#+begin_src sh -# Edit these lines to whatever you want - see the next code block for my personal configuration. -WorkingDirectory=/srv/gemini -ExecStart=agate --hostname $(uname -n) --lang en -#+end_src - -This is my personal config: - -#+begin_src sh -WorkingDirectory=/var/gemini/ -ExecStart=agate --hostname gemini.example.com --lang en -#+end_src - -Since we've altered the systemd configuration files, we have to reload the -daemon. Let's do that, restart our service, and check its status. - -#+begin_src sh -sudo systemctl daemon-reload -sudo systemctl restart gemini.service -sudo systemctl status gemini.service -#+end_src - -* Fixing Systemd Errors - -If you're still getting errors, the installation process may not have properly -enabled the gemini service. Fix it with the following commands. - -#+begin_src sh -sudo systemctl enable gemini.service -sudo systemctl restart gemini.service -sudo systemctl status gemini.service -#+end_src - -* Firewall Rules - -Great! Our server is now functional and running. The first consideration now is -that you need to be able to access port 1965 on the server. If you have a -firewall enabled, you'll need to open that port up. - -#+begin_src sh -sudo ufw allow 1965 -sudo ufw reload -#+end_src - -* Creating Content - -Let's create the Gemini capsule. Note that wherever you set the -=WorkingDirectory= variable to earlier, Agate will expect you to put your Gemini -capsule contents in a sub-folder called =content=. So, I place my files in -=/var/gmi/content=. I'm going to create that folder now and put a file in there. - -#+begin_src sh -sudo mkdir /var/gemini/content -sudo nano /var/gemini/content/index.gmi -#+end_src - -You can put whatever you want in the =index.gmi= file, just make sure it's valid -Gemtext. - -* The Results - -To view the results, you can use a Gemini browser, such as [[https://gmi.skyjake.fi/lagrange/][Lagrange]] or [[https://github.com/makeworld-the-better-one/amfora][amfora]]. -#+date: <2021-04-23 Fri 00:00:00> -#+title: Building a Lightweight PHP Static Commenting System Without JavaScript -#+description: Technical walkthrough for constructing a lightweight, privacy-oriented static comment system using PHP, with no client-side scripting or external dependencies. -#+slug: php-comment-system - -* The Terrible-ness of Commenting Systems - -The current state of affairs regarding interactive comment systems is, well, -terrible. It is especially awful if you're a privacy conscious person who does -not generally load third-party scripts or frames on the websites you visit. - -Even further, many comment systems are charging exorbitant fees for something -that should be standard. - -Of course, there are some really terrible options: - -- Facebook Comments -- Discourse - -There are some options that are better but still use too many scripts, frames, -or social integrations on your web page that could impact some users: - -- Disqus -- Isso -- Remark42 - -Lastly, I looked into a few unique ways of generating blog comments, such as -using Twitter threads or GitHub issues to automatically post issues. However, -these both rely on external third-party sites that I don't currently use. - -* Stay Static with Server-Side Comments - -The main issue for my personal use-case is that my blog is completely, 100% -static. I use PHP on the back-end but website visitors only see HTML (Hypertext -Markup Language) and a single CSS (Cascading Style Sheets) file. No external -JavaScript and no embedded frames. - -So, how do we keep a site static and still allow users to interact with blog -posts? The key actually pretty simple - I'm already using PHP, so why not rely -on the classic HTML =<form>= and a PHP script to save the comments somewhere? As -it turns out, this was a perfect solution for me. - -The second issue for my personal use-case is that I am trying to keep the -contents of my website accessible over time, as described by [cite/t:@brandur], -in his post entitled [[https://brandur.org/fragments/graceful-degradation-time][Blog with Markdown + Git, and degrade gracefully through -time]] . - -This means I cannot rely on a database for comments, since I do not rely on a -database for any other part of my websites. - -I blog in plain Markdown files, commit all articles to Git, and ensure that -future readers will be able to see the source data long after I'm gone, or the -website has gone offline. However, I still haven't committed any images served -on my blog to Git, as I'm not entirely sold on Git LFS (large file storage) -yet - for now, images can be found at [[https://img.cleberg.net][img.cleberg.net]]. - -Saving my comments back to the Git repository ensures that another aspect of my -site will degrade gracefully. - -* Create a Comment Form - -Okay, let's get started. The first step is to create an HTML form that users can -see and utilize to submit comments. This is fairly easy and can be changed -depending on your personal preferences. - -Take a look at the code block below for the form I currently use. Note that -=<current-url>= is replaced automatically in PHP with the current post's URL -(uniform resource locator), so that my PHP script used later will know which -blog post the comment is related to. - -The form contains the following structure: - -1. =<form>= - This is the form and will determine which PHP script to send the - comment to. -2. =<section hidden>= - This section is hidden from the user and is used to - ensure that we know which blog post sent the comment. -3. =<section>= Display Name (Optional) - Used to accept a display name, if - entered. -4. =<section>= Comment (Required) - Used to accept the user's full comment. - Markdown is allowed. -5. =<button>= - A button to submit the form. - -#+begin_src html -<form action="/comment.php" method="POST"> - <h3>Leave a Comment</h3> - <section hidden> - <label class="form-label" for="postURL">Post URL</label> - <input - class="form-control" - id="postURL" - name="postURL" - type="text" - value="<current-url>" - /> - </section> - <section> - <label class="form-label" for="userName">Display Name</label> - <input - class="form-control" - id="userName" - name="userName" - placeholder="John Doe" - type="text" - /> - </section> - <section> - <label class="form-label" for="userContent">Your Comment</label> - <textarea - class="form-control" - id="userContent" - name="userContent" - rows="3" - placeholder="# Feel free to use Markdown" - aria-describedby="commentHelp" - required - ></textarea> - <div id="commentHelp" class="form-text"> - Comments are saved as Markdown and cannot be edited or deleted. - </div> - </section> - <button type="submit">Submit</button> -</form> -#+end_src - -* Handle Comments via POST - -Now that we have a form and can submit comments, we need to create a PHP script -so that the server can fetch the comment data and save it. Make sure your PHP -script name matches the name you entered in the =action= field in your form. - -See the code block below for the contents of my =comment.php= script. We perform -the following tasks in this script: - -1. Grab the POST data from the HTML form. -2. Sanitize the comment data with =htmlentities=. -3. Set the display name to =Anonymous= if it was left blank. -4. Create a PHP object that combines all of this data. -5. Check if our destination file =comments.json= exists. -6. If so, convert the PHP object to JSON (JavaScript Object Notation) and save - it to the file. -7. If the =comments.json= file does not exist, the script will exit with an - error. You can alter this to ensure it creates the script, but my source code - includes the file by default, so it will always exist. -8. Finally, send the user back to the =#comments= section of the blog post they - just read. - -#+begin_src php -// Get the content sent from the comment form -$comment = htmlentities($_POST['userContent']); -$post_url = $_POST['postURL']; - -// Set default values if blank -if (isset($_POST['userName']) && trim($_POST['userName']) !== "") { - $username = $_POST['userName']; -} else { - $username = 'Anonymous'; -} - -// Create an empty PHP object -$user_object = new stdClass(); - -// Add object content -$user_object->timestamp = date('Y-m-d H:i:s'); -$user_object->username = $username; -$user_object->comment = $comment; -$user_object->post_url = $post_url; - -// Append JSON to file -$file_name = 'comments.json'; -if (file_exists($file_name)) { - $source_data = file_get_contents($file_name); - $temp_array = json_decode($source_data); - array_push($temp_array, $user_object); - $json_data = json_encode($temp_array, JSON_PRETTY_PRINT); - file_put_contents($file_name, $json_data); -} else { - die('Error: The "comments.json" file does not exist.'); -} - -// Send the user back -header('Location: ' . $post_url . '#comments'); -#+end_src - -If you're using Apache, make sure the =www-data= user on your server has the -correct permissions to your website directory or else it will not be able to -write to =comments.json=. - -#+begin_src sh -chgrp -R www-data /path/to/website/ -chmod -R g+w comments.json -#+end_src - -* Display User Comments - -Now that we can submit comments, and they are saved to the =comments.json= file, -let's make sure we can show those comments in each blog post. - -The code block below shows the function I use to decode my =comments.json= file, -check if the comments apply to the current post, and then display them. - -This piece of code should *really* be inside a function (or at least in an -organized PHP workflow). Don't just copy-and-paste and expect it to work. You -need to at least supply a =$query= variable depending on the page visited. - -#+begin_src php -$query = 'your-blog-post.html'; - -// Load saved comments -$comments_file = 'comments.json'; -$comments_raw = file_get_contents($comments_file); -$comments = json_decode($comments_raw); -$comment_section = '<section id="comments" class="comments"><h3>Comments</h3>'; -foreach ($comments as $comment) { - if ($comment->post_url == "https://example.com/post/" . $query) { - // Assign metadata to variables - $comment_timestamp = $comment->timestamp; - $comment_username = $comment->username; - $comment_content = $comment->comment; - - // Parse the comment, in case it contains Markdown - $comment_md = Parsedown::instance()->text($comment_content); - $comment_html = new DOMDocument(); - $comment_html->loadHTML($comment_md); - $comment_html_links = $comment_html->getElementsByTagName('a'); - foreach ($comment_html_links as $comment_html_link) { - $comment_html_link->setAttribute('rel', 'noreferrer'); - $comment_html_link->setAttribute('target', '_blank'); - } - $comment_secured_html = $comment_html->saveHTML(); - - // Apply metadata to comments section - $comment_section .= '<div class="user-comment"><div class="row"><label>Timestamp:</label><p>' . $comment_timestamp . '</p></div><div class="row"><label>Name:</label><p>' . $comment_username . '</p></div><div class="row markdown"><label>Comment:</label><div class="comment-markdown">' . $comment_secured_html . '</div></div></div>'; - } -} - -echo $comment_section; -#+end_src - -* Bonus: Create a 'Recent Comments' Page - -Finally, the last part of my current system is to create a Recent Comments page -so that I can easily check-in on my blog and moderate any spam. As an -alternative, you could use PHP's =mail()= function to email you for each blog -comment. - -The code to do this is literally the same code as the previous section, I just -make sure it is printed when someone visits =https://example.com/comments/=. - -* Possible Enhancements - -This comment system is by no means a fully-developed system. I have noted a few -possible enhancements here that I may implement in the future: - -- Create a secure moderator page with user authentication at - =https://blog.example.com/mod/=. This page could have the option to edit or - delete any comment found in =comments.json=. -- Create a temporary file, such as =pending_comments.json=, that will store - newly-submitted comments and won't display on blog posts until approved by a - moderator. -- Create a =/modlog/= page with a chronological log, showing which moderator - approved which comments and why certain comments were rejected. -#+date: <2021-04-28 Wed 00:00:00> -#+title: Getting Started with Photography: Gear and Best Practices -#+description: Instructional document covering basic techniques in photography, including equipment selection, operational best practices, and methods for capturing high-quality images. -#+slug: photography - -* Why Photography? - -I've often wondered why photography is as enticing as it is. You can see -billions of people around the world taking photographs every single moment of -the day. New technology often boasts about their photographic capabilities, -especially smartphones. I would even assume that we live in a world where there -is never a moment in which a photograph is not being taken somewhere on Earth. - -As for myself, I would simply say that I enjoy preserving a memory in physical -(or digital) form. I've never had the best memory when it comes to recalling -details of places and people gone by, so it helps to have a frame of reference -lying around. - -Regardless of the reason, I think most people would agree that you simply cannot -have too many hobbies. - -* Older Cameras - -I started playing around with the idea of photography when my family purchased a -Fujifilm camera for family-specific events. I don't recall the specific model, -but I do recall it was a point-and-shoot camera without an interchangeable lens. -However, it was of great value to someone, like myself, who couldn't afford any -other camera. I took about 10,000 shots with that camera over a 3-5 year span. -Most notably, all of my trips to California were documented through this camera. - -When possible, I would borrow my sister's camera, which is a Sony SLT-A58. This -camera was great and allowed for some of my best early shots, especially those -taken in Utah's and Nevada's parks. - -* My Current Kit - -I've finally come to a point in my life where I have the disposable income to -invest in a solid photography kit. I played around with the idea of a lot of -different cameras, different types, new vs used, etc. Finally, I settled on the -[[https://en.wikipedia.org/wiki/Sony_%CE%B17_III][Sony α7 III]]. This camera is mirror-less and uses a full-frame image sensor at 24 -megapixels. I don't create large prints, and I am mostly focused on preserving -memories in high quality for the next 5-10 years with this camera, so the -specifications here are just perfect for me. - -For lenses, I decided to buy two lenses that could carry me through most -situations: - -- [[https://electronics.sony.com/imaging/lenses/full-frame-e-mount/p/sel2470z][Vario-Tessar T** FE 24-70 mm F4 ZA OSS]] -- [[https://www.tamron-usa.com/product/lenses/a047.html][Tamron 70-300mm f4.5-6.3 Di III RXD]] - -In addition, I grabbed a couple [[https://www.promaster.com/Product/6725][HGX Prime 67mm]] protection filters for the -lenses. - -As I delve further into photography and pick up more skills, I will most likely -go back and grab a lens with a higher f-stop value, such as f/1.8. I toyed with -the idea of grabbing a 50 mm at =f/1.8=, but decided to keep things in a -reasonable price range instead. - -Finally, I made sure to buy a photography-specific backpack with a rain guard, -and the zipper on the back panel, to protect the equipment while wearing the -bag. If you've ever had to haul around a DSLR (digital single-lens reflex) -camera in a bag that only has a shoulder strap, you'll know the pain it can -cause. Putting all my equipment in a backpack was an easy decision. -#+date: <2021-05-30 Sun 00:00:00> -#+title: Automated Script for Correcting Git Author Details in Multiple Projects -#+description: Detailed instructions for systematically updating the Git author name and email information in multiple repositories using command-line tools and scripts. -#+slug: changing-git-authors - -* Changing Git Author/Email Based on Previously Committed Email - -Here's the dilemma: You've been committing changes to your Git repository with -an incorrect name or email (or multiple repositories), and now you want to fix -it. Luckily, there's a semi-reliable way to fix that. While I have never -experienced issues with this method, some people have warned that it can mess -with historical hashes and integrity of commits, so use this method only if -you're okay accepting that risk. - -Okay, let's create the bash script: - -#+begin_src sh -nano change_git_authors.sh -#+end_src - -The following information can be pasted directly into your bash script. The only -changes you need to make are to the following variables: - -- =OLD_EMAIL= -- =CORRECT_NAME= -- =CORRECT_EMAIL= - -#+begin_src sh -#!/bin/sh - -# List all sub-directories in the current directory -for dir in */ -do - # Remove the trailing "/" - dir=${dir%*/} - # Enter sub-directory - cd $dir - - git filter-branch --env-filter ' - - OLD_EMAIL="[email protected]" - CORRECT_NAME="your-new-name" - CORRECT_EMAIL="[email protected]" - - if [ "$GIT_COMMITTER_EMAIL" = "$OLD_EMAIL" ] - then - export GIT_COMMITTER_NAME="$CORRECT_NAME" - export GIT_COMMITTER_EMAIL="$CORRECT_EMAIL" - fi - if [ "$GIT_AUTHOR_EMAIL" = "$OLD_EMAIL" ] - then - export GIT_AUTHOR_NAME="$CORRECT_NAME" - export GIT_AUTHOR_EMAIL="$CORRECT_EMAIL" - fi - ' --tag-name-filter cat -- --branches --tags - - git push --force --tags origin 'refs/heads/*' - - cd .. -done -#+end_src - -Finally, save the bash script and make it executable. - -#+begin_src sh -chmod a+x change_git_authors.sh -#+end_src - -Now you can run the script and should see the process begin. - -#+begin_src sh -./change_git_authors.sh -#+end_src -#+date: <2021-07-15 Thu 00:00:00> -#+title: Automated Deletion of All GitLab Repositories Using Python -#+description: Stepwise instructions for executing a Python script to delete all repositories associated with a GitLab account. Includes authentication and error handling procedures. -#+slug: delete-gitlab-repos - -* Background - -Have you ever used GitLab to host your source code, moved to a different host, -and wanted to delete everything from your GitLab account? Well, this post covers -any scenario where you would want to delete all repositories from your GitLab -account. - -For me, I currently maintain around 30 repositories and don't like to manually -delete them whenever I switch host. GitHub has a few different tools online to -delete all repositories for you, but I have not found anything similar for -GitLab, so I needed an alternative solution. - -* Use a Python Script - -** Requirements - -Before we look at the script, make sure you know your GitLab username. Next, -[[https://gitlab.com/-/profile/personal_access_tokens][create an authorization token]] so that the Python script can delete your -repositories. Don't lose this token or else you'll need to create a new one. - -** Create the Script - -To run a Python script, you must first create it. Open a terminal and enter the -following commands in whichever directory you prefer to store the script. You -can do the same things in a file manager if you prefer. - -#+begin_src sh -mkdir delete-gitlab -#+end_src - -#+begin_src sh -cd delete-gitlab -#+end_src - -#+begin_src sh -nano main.py -#+end_src - -Enter the following code into your =main.py= script. - -#+begin_src python -import request -import json - - -def get_project_ids(): - url = "https://gitlab.com/api/v4/users/{user-id}/projects" - - querystring = {"owned": "true", "simple": "true", "per_page": "50"} - - payload = "" - headers = {'authorization': 'Bearer {auth-token}'} - - response = requests.request("GET", url, data=payload, headers=headers, params=querystring) - - projects = json.loads(response.text) - projects_ids = list(map(lambda project: project.get('id'), projects)) - - return projects_ids - - -def remove_project(project_id): - url_temp = "https://gitlab.com/api/v4/projects/{project}" - headers = {'authorization': 'Bearer {auth-token}'} - querystring = "" - payload = "" - - url = url_temp.format(project=project_id) - - response = requests.request("DELETE", url, data=payload, headers=headers, params=querystring) - project = json.loads(response.text) - print(project) - - -def main(): - projects_ids = get_project_ids() - - url_temp = "https://gitlab.com/api/v4/projects/{project}" - headers = {'authorization': 'Bearer {auth-token}'} - querystring = "" - payload = "" - - for project_id in projects_ids: - url = url_temp.format(project=project_id) - - response = requests.request("GET", url, data=payload, headers=headers, params=querystring) - project = json.loads(response.text) - print(str(project.get('id')) + " " + project.get('name')) - print("Removing...") - remove_project(project_id) - - -if __name__ == "__main__": - main() -#+end_src - -Now that you have the proper information, replace ={user-id}= with your GitLab -username and ={auth-token}= with the authorization token you created earlier. - -Finally, simply run the script and watch the output. You can also use PyCharm -Community Edition to edit and run the Python script if you don't want to work in -a terminal. - -#+begin_src sh -python3 main.py -#+end_src -#+date: <2021-08-25 Wed 00:00:00> -#+title: Audit Sampling Made Easy: Using Pandas for Random and Stratified Samples -#+description: Presentation of methods for implementing audit sampling techniques including simple random, stratified, and systematic sampling using Python's Pandas library for precise audit outcomes. -#+slug: audit-sampling - -* Introduction - -For anyone who is familiar with internal auditing, external auditing, or -consulting, you will understand how tedious audit testing can become when you -are required to test large swaths of data. When we cannot establish an automated -means of testing an entire population, we generate samples to represent the -population of data. This helps ensure we can have a small enough data pool to -test and that our results still represent the population. - -However, sampling data within the world of audit still seems to confuse quite a -lot of people. While some audit-focused tools have introduced sampling -functionality (e.g. Wdesk), many audit departments and firms cannot use software -like this due to certain constraints, such as the team's budget or knowledge. -Here is where this article comes in: we're going to use [[https://www.python.org][Python]], a free and -open-source programming language, to generate random samples from a dataset in -order to suffice numerous audit situations. - -* Audit Requirements for Sampling - -Before we get into the details of how to sample with Python, I want to make sure -I discuss the different requirements that auditors may have of samples used -within their projects. - -** Randomness - -First, let's discuss randomness. When testing out new technology to help assist -with audit sampling, you need to understand exactly how your samples are being -generated. For example, if the underlying function is just picking every 57th -element from a list, that's not truly random; it's a systematic form of -sampling. Luckily, since Python is open-source, we have access to its codebase. -Through this blog post, I will be using the [[https://pandas.pydata.org][pandas]] module in order to generate -the random samples. More specifically, I will be using the -[[https://pandas.pydata.org/pandas-docs/stable/reference/api/pandas.DataFrame.sample.html][pandas.DataFrame.sample]] function provided by Pandas. - -Now that you know what you're using, you can always check out the code behind -=pandas.DataFrame.sample=. This function does a lot of work, but we really only -care about the following snippets of code: - -#+begin_src python -# Process random_state argument -rs = com.random_state(random_state) - -... - -locs = rs.choice(axis_length, size=n, replace=replace, p=weights) -result = self.take(locs, axis=axis) -if ignore_index: -result.index = ibase.default_index(len(result)) - -return result -#+end_src - -The block of code above shows you that if you assign a =random_state= argument -when you run the function, that will be used as a seed number in the random -generation and will allow you to reproduce a sample, given that nothing else -changes. This is critical to the posterity of audit work. After all, how can you -say your audit process is adequately documented if the next person can't run the -code and get the same sample? The final piece here on randomness is to look at -the [[https://docs.python.org/3/library/random.html#random.choice][choice]] function used above. This is the crux of the generation and can also -be examined for more detailed analysis on its reliability. As far as auditing -goes, we will trust that these functions are mathematically random. - -** Sample Sizes - -As mentioned in the intro, sampling is only an effective method of auditing when -it truly represents the entire population. While some audit departments or firms -pmay consider certain judgmental sample sizes to be adequate, you may need to -rely on statistically-significant confidence levels of sample testing at certain - -points. I will demonstrate both here. For statistically-significant confidence -levels, most people will assume a 90% - 99% confidence level. In order to -actually calculate the correct sample size, it is best to use statistical tools -due to the tedious math work required. For example, for a population of 1000, -and a 90% confidence level that no more than 5% of the items are nonconforming, -you would sample 45 items. - -However, in my personal experience, many audit departments and firms do not use -statistical sampling. Most people use a predetermined, often proprietary, table -that will instruct auditors which sample sizes to choose. This allows for -uniform testing and reduces overall workload. See the table below for a common -implementation of sample sizes: - -| Control Frequency | Sample Size (High Risk) | Sample Size (Low Risk) | -|-------------------+-------------------------+------------------------| -| More Than Daily | 40 | 25 | -| Daily | 40 | 25 | -| Weekly | 12 | 5 | -| Monthly | 5 | 3 | -| Quarterly | 2 | 2 | -| Semi-Annually | 1 | 1 | -| Annually | 1 | 1 | -| Ad-hoc | 1 | 1 | - -*** Sampling with Python & Pandas - -In this section, I am going to cover a few basic audit situations that require -sampling. While some situations may require more effort, the syntax, -organization, and intellect used remain largely the same. If you've never used -Python before, note that lines starting with a '=#=' symbol are called comments, -and they will be skipped by Python. I highly recommend taking a quick tutorial -online to understand the basics of Python if any of the code below is confusing -to you. - -** Simple Random Sample - -First, let's look at a simple, random sample. The code block below will import -the =pandas= module, load a data file, sample the data, and export the sample to -a file. - -#+begin_src python -# Import the Pandas module -import pandas - -# Specify where to find the input file & where to save the final sample -file_input = r'Population Data.xlsx' -file_output = r'Sample.xlsx' - -# Load the data with pandas -# Remember to use the sheet_name parameter if your Excel file has multiple sheets -df = pandas.read_excel(file_input) - -# Sample the data for 25 selections -# Remember to always use the random_state parameter so the sample can be re-performed -sample = df.sample(n=25, random_state=0) - -# Save the sample to Excel -sample.to_excel(file_output) -#+end_src - -** Simple Random Sample: Using Multiple Input Files - -Now that we've created a simple sample, let's create a sample from multiple -files. - -#+begin_src python -# Import the Pandas module -import pandas - -# Specify where to find the input file & where to save the final sample -file_input_01 = r'Population Data Q1.xlsx' -file_input_02 = r'Population Data Q2.xlsx' -file_input_03 = r'Population Data Q3.xlsx' -file_output = r'Sample.xlsx' - -# Load the data with pandas -# Remember to use the sheet_name parameter if your Excel file has multiple sheets -df_01 = pandas.read_excel(file_input_01) -df_02 = pandas.read_excel(file_input_02) -df_03 = pandas.read_excel(file_input_03) - -# Sample the data for 5 selections from each quarter -# Remember to always use the random_state parameter so the sample can be re-performed -sample_01 = df_01.sample(n=5, random_state=0) -sample_02 = df_02.sample(n=5, random_state=0) -sample_03 = df_03.sample(n=5, random_state=0) - -# If required, combine the samples back together -sample = pandas.concat([sample_01, sample_02, sample_03], ignore_index=True) - -# Save the sample to Excel -sample.to_excel(file_output) -#+end_src - -** Stratified Random Sample - -Well, what if you need to sample distinct parts of a single file? For example, -let's write some code to separate our data by "Region" and sample those regions -independently. - -#+begin_src python -# Import the Pandas module -import pandas - -# Specify where to find the input file & where to save the final sample -file_input = r'Sales Data.xlsx' -file_output = r'Sample.xlsx' - -# Load the data with pandas -# Remember to use the sheet_name parameter if your Excel file has multiple sheets -df = pandas.read_excel(file_input) - -# Stratify the data by "Region" -df_east = df[df['Region'] == 'East'] -df_west = df[df['Region'] == 'West'] - -# Sample the data for 5 selections from each quarter -# Remember to always use the random_state parameter so the sample can be re-performed -sample_east = df_east.sample(n=5, random_state=0) -sample_west = df_west.sample(n=5, random_state=0) - -# If required, combine the samples back together -sample = pandas.concat([sample_east, sample_west], ignore_index=True) - -# Save the sample to Excel -sample.to_excel(file_output) -#+end_src - -** Stratified Systematic Sample - -This next example is quite useful if you need audit coverage over a certain time -period. This code will generate samples for each month in the data and combine -them all together at the end. Obviously, this code can be modified to stratify -by something other than months, if needed. - -#+begin_src python -# Import the Pandas module -import pandas - -# Specify where to find the input file & where to save the final sample -file_input = r'Sales Data.xlsx' -file_output = r'Sample.xlsx' - -# Load the data with pandas -# Remember to use the sheet_name parameter if your Excel file has multiple sheets -df = pandas.read_excel(file_input) - -# Convert the date column to datetime so the function below will work -df['Date of Sale'] = pandas.to_datetime(df['Date of Sale']) - -# Define a function to create a sample for each month -def monthly_stratified_sample(df: pandas.DataFrame, date_column: str, num_selections: int) -> pandas.DataFrame: - static_num_selections = num_selections final_sample = pandas.DataFrame() - for month in range(1, 13): - num_selections = static_num_selections - rows_list = [] - for index, row in df.iterrows(): - df_month = row[date_column].month - if month == df_month: - rows_list.append() - monthly_df = pd.DataFrame(data=rows_list) - if (len(monthly_df)) == 0: - continue - elif not (len(monthly_df) > sample_size): - num_selections = sample_size - elif len(monthly_df) >= sample_size: - num_selections = sample_size - sample = monthly_df.sample(n=num_selections, random_state=0) - final_sample = final_sample.append(sample) - return sample - -# Sample for 3 selections per month -sample_size = 3 -sample = monthly_stratified_sample(df, 'Date of Sale', sample_size) -sample.to_excel(file_output) -#+end_src - -*** Documenting the Results - -Once you've generated a proper sample, there are a few things left to do in -order to properly ensure your process is reproducible. - -1. Document the sample. Make sure the resulting file is readable and includes - the documentation listed in the next bullet. -2. Include documentation around the data source, extraction techniques, any - modifications made to the data, and be sure to include a copy of the script - itself. -3. Whenever possible, perform a completeness and accuracy test to ensure your - sample is coming from a complete and accurate population. To ensure - completeness, compare the record count from the data source to the record - count loaded into Python. To ensure accuracy, test a small sample against the - source data (e.g., test 5 sales against the database to see if the details - are accurate). -#+date: <2021-10-09 Sat 00:00:00> -#+title: Setting Up Apache Rewrite Rules for Extensionless URLs -#+description: Technical guide to applying Apache mod_rewrite directives for transforming .html file requests into clean directory-style URL structures to enhance website navigation and indexing. -#+slug: apache-redirect - -* The Problem - -After recently switching static site generators (SSG), my blog URLs (uniform -resource locators) changed with no option to preserve the classic =.html= -extension at the end of my blog post URLs. - -I really disliked using my old SSG ([[https://jekyllrb.com][Jekyll]]) and prefer my new tool ([[https://www.getzola.org][Zola]]) much -more, so I was determined to figure out a way to get the proper redirect set up -so that people who find my posts online aren't constantly met by 404 errors. - -* The Solution - -To solve this problem, I really needed to solve two pieces: - -1. Redirect all blog post URL requests from =/blog/some-post.html= to - =/blog/some-post/=. -2. Ensure that no other =.html= files are redirected, such as =index.html=. - -After /a lot/ of tweaking and testing, I believe I have finally found the -solution. The solution is shown below. - -#+begin_src conf -RewriteEngine On -RewriteCond %{REQUEST_URI} !\index.html$ [NC] -RewriteRule ^(.*).html$ https://example.com/$1 [R=301,L] -#+end_src - -This piece of code in the Apache =.conf= or =.htaccess= file will do the -following: - -1. Turn on the RewriteEngine so that we can modify URLs. -2. Ignore any =index.html= files from the rule we are about to specify. -3. Find any =.html= files within the website directory and redirect it to - exclude the file extension. -4. The final piece is adding the trailing slash (=/=) at the end of the URL - - you'll notice that I don't have an Apache rule for that since Apache handles - that automatically. -#+date: <2021-12-04 Sat 00:00:00> -#+title: How I Prepared for and Passed the CISA Exam: A Practical Study Guide -#+description: Comprehensive outline of study materials, preparation strategies, and procedural advice for passing the CISA examination on the initial attempt. -#+slug: cisa - -* What is the CISA? - -For those of you lucky enough not to be knee-deep in the world of information -technology (IT) and information systems (IS) auditing, the [[https://www.isaca.org/credentialing/cisa][CISA]] (Certified -Information Systems Auditor) certification and exam are part of ISACA's suite of -certifications. As I often explain it to people like my family, it basically -means you're employed to use your knowledge of information systems, regulations, -common threats, risks, etc. in order to assess an organization's current control -of their risk. If a risk isn't controlled (and the company doesn't want to -accept the risk), an IS auditor will suggest implementing a control to address -that risk. - -Now, the CISA certification itself is, in my opinion, the main certification for -this career. While certifications such as the CPA (Certified Public Accountant) -or CISSP (Certified Information Systems Security Professional) are beneficial, -nothing matches the power of the CISA for an IS auditor when it comes to getting -hired, getting a raise/bonus, or earning respect in the field. - -However, to be honest, I am a skeptic of most certifications. I understand the -value they hold in terms of how much you need to commit to studying or learning -on the job, as well as the market value for certifications such as the CISA. But -I also have known some very +incompetent+ /less than stellar/ auditors who have -relevant certifications. - -The same goes for most industries: if a person is good at studying, they can -earn the certification. However, that knowledge means nothing unless you're -actually able to use it in real life and perform as expected of a certification -holder. The challenge comes when people are hired or connected strictly because -of their certifications or resume; you need to see a person work before you can -assume them having a CISA means they're better than someone without the CISA. - -Okay, rant over. Certifications are generally accepted as a measuring stick of -commitment and quality of an employee, so I am accepting it too. - -* Exam Content - -The CISA is broken down into five sections, each weighted with a percentage of -test questions that may appear. - -Since the exam contains 150 questions, here's how those sections break down: - -| Exam Section | Percentage of Exam | Questions | -|---------------+--------------------+-----------| -| 1 | 21% | 32 | -| 2 | 17% | 26 | -| 3 | 12% | 18 | -| 4 | 23% | 34 | -| 5 | 27% | 40 | -| *Grand Total* | *100%* | *150* | - -* My Studying Habits - -This part is a little hard for me to break down into specific detail due to the -craziness of the last year. While I officially purchased my studying materials -in December 2020 and opened them to "start studying" in January 2021, I really -wasn't able to study much due to the demands of my job and personal life. - -Let me approach this from a few different viewpoints. - -** Study Materials - -Let's start by discussing the study materials I purchased. I'll be referring to -#1 as the CRM (CISA Review Manual) and #2 as the QAE (Questions, Answers & -Explanations). - -1. [[https://store.isaca.org/s/store#/store/browse/detail/a2S4w000004KoCbEAK][CISA Review Manual, 27th Edition | Print]] -2. [[https://store.isaca.org/s/store#/store/browse/detail/a2S4w000004KoCcEAK][CISA Review Questions, Answers & Explanations Manual, 12th Edition | Print]] - -The CRM is an excellent source of information and could honestly be used as a -reference for most IS auditors as a learning reference during their daily audit -responsibilities. However, it is *full* of information and can be overloading if -you're not good at filtering out useless information while studying. - -The QAE is the real star of the show here. This book contains 1000 questions, -separated by exam section, and a practice exam. My only complaint about the QAE -is that each question is immediately followed with the correct answer and -explanations below it, which means I had to use something to constantly cover -the answers while I was studying. - -I didn't use the online database version of the QAE, but I've heard that it's -easier to use than the printed book. However, it is more expensive ($299 -database vs $129 book) which might be important if you're paying for materials -yourself. - -In terms of question difficulty, I felt that the QAE was a good representation -of the actual exam. I've seen a lot of people online say it wasn't accurate to -the exam or that it was much easier/harder, but I disagree with all of those. -The exam was fairly similar to the QAE, just focusing on whichever topics they -chose for my version of the exam. - -If you understand the concepts, skim the CRM (and read in-depth on topics you -struggle with), and use the QAE to continue practicing exam-like questions, you -should be fine. I didn't use any online courses, videos, etc. - the ISACA -materials are more than enough. - -** Studying Process - -While I was able to briefly read through sections 1 and 2 in early 2021, I had -to stop and take a break from February/March to September. I switched jobs in -September, which allowed me a lot more free time to study. - -In September, I studied sections 3-5, took notes, and did a quick review of the -section topics. Once I felt comfortable with my notes, I took a practice exam -from the QAE manual and scored 70% (105/150). - -Here's a breakdown of my initial practice exam: - -| Exam Section | Incorrect | Correct | Grand Total | Percent | -|---------------+-----------+---------+-------------+---------| -| 1 | 8 | 25 | 33 | 76% | -| 2 | 5 | 20 | 25 | 80% | -| 3 | 6 | 12 | 18 | 67% | -| 4 | 10 | 23 | 33 | 70% | -| 5 | 16 | 25 | 41 | 61% | -| *Grand Total* | *45* | *105* | *150* | *70%* | - -As I expected, my toughest sections were related to project management, -development, implementation, and security. - -This just leaves October and November. For these months, I tried to practice -every few days, doing 10 questions for each section, until the exam. This came -out to 13 practice sessions, ~140 questions per section, and ~700 questions -total. - -While some practice sessions were worse and some were better, the final results -were similar to my practice exam results. As you can see below, my averages were -slightly worse than my practice exam. However, I got in over 700 questions of -practice and, most importantly, /I read through the explanations every time I -answered incorrectly and learned from my mistakes/. - -| Exam Section | Incorrect | Correct | Grand Total | Percent | -|---------------+-----------+---------+-------------+---------| -| 1 | 33 | 108 | 141 | 77% | -| 2 | 33 | 109 | 142 | 77% | -| 3 | 55 | 89 | 144 | 62% | -| 4 | 52 | 88 | 140 | 63% | -| 5 | 55 | 85 | 140 | 61% | -| *Grand Total* | *228* | *479* | *707* | *68%* | - -* Results - -Now, how do the practice scores reflect my actual results? After all, it's hard -to tell how good a practice regimen is unless you see how it turns out. - -| Exam Section | Section Name | Score | -|--------------+------------------------------------------------------------------+-------| -| 1 | Information Systems Auditing Process | 678 | -| 2 | Governance and Management of IT | 590 | -| 3 | Information Systems Acquisition, Development, and Implementation | 721 | -| 4 | Information Systems Operations and Business Resilience | 643 | -| 5 | Protection of Information Assets | 511 | - -Now, in order to pass the CISA, you need at least 450 on a sliding scale of -200-800. Personally, I really have no clue what an average CISA score is. After -a /very/ brief look online, I can see that the high end is usually in the low -700s. In addition, only about 50-60% of people pass the exam. - -Given this information, I feel great about my scores. 616 may not be phenomenal, -and I wish I had done better on sections 2 & 5, but my practicing seems to have -worked very well overall. - -However, the practice results do not conform to the actual results. Section 2 -was one of my highest practice sections and was my second-lowest score in the -exam. Conversely, section 3 was my second-lowest practice section and turned out -to be my highest actual score! - -After reflecting, it is obvious that if you have any background on the CISA -topics at all, the most important part of studying is doing practice questions. -You really need to understand how to read the questions critically and pick the -best answer. - -* Looking Forward - -I am extremely happy that I was finally able to pass the CISA. Looking to the -future, I'm not sure what's next in terms of professional learning. My current -company offers internal learning courses, so I will most likely focus on that if -I need to gain more knowledge in certain areas. - -To be fair, even if you pass the CISA, it's hard to become an expert on any -specific topic found within. My career may take me in a different direction, and -I might need to focus more on security or networking certifications (or possibly -building a better analysis/visualization portfolio if I want to go into data -analysis/science). - -All I know is that I am content at the moment and extremely proud of my -accomplishment. -#+date: <2022-02-10 Thu 00:00:00> -#+title: From Cubicles to Home Offices: My Journey Through Changing Workspaces -#+description: Examination of factors influencing the shift from traditional office environments to remote work, including benefits, constraints, and implementation recommendations. -#+slug: leaving-the-office - -* The Working World is Changing - -There has been a trend for the past few years of companies slowly realizing that -the pandemic is not just a temporary state that will go away eventually and let -everything return to the way it was before. In terms of business and employment, -this means that more and more jobs are being offered as permanently remote -roles. - -I had always dreamt of working from home but thought of it as a fantasy, -especially since I did not want to move over into the software development -field. However, I have found that almost all roles being sent to me via -recruiters are permanently remote (although most are limited to US citizens or -even region-locked for companies who only operate in select states). - -I decided to take a look back at my relatively short career so far and compare -the positive and negative effects of the different work environments I've been -in. - -* In-Person Offices - -** Retail Internship - -I started my first job as a management intern at a busy retail pharmacy, working -my 40-hour weeks on my feet. As these retail stores don't believe in resting or -sitting down, you can guarantee that you will spend entire shifts standing, -walking, or running around the store. Unfortunately, I worked at a time when our -store didn't have enough managers, so I spent the majority of my tenure at the -store running and breaking a sweat. - -Now, things aren't all bad in retail stores like this. It is definitely tiring -and inefficient to force employees to work constantly, or pretend to work if -there's nothing to do, and not allow anyone to sit down. However, if you are -able to operate a retail store with a limited crew and provide enough comfort -and support, I believe these jobs could be both comfortable and efficient. - -** Semi-Private Cubicles - -After about a year, I was able to find another internship - this time, it was in -my field of interest: internal auditing. This was for a life insurance company -that was well over 100 years old. The age of the company shows if you work -there, as most people in management are well into their 40s-60s with little to -no youthful leadership in the company. Likewise, they owned a large headquarters -in a nice area of town with plenty of space, parking, etc. - -One upside is that each person gets their own large L-shaped desk, formed into -cubicles that house 4 desks/employees. These "pods" of 4-person cubicles are -linked throughout each floor of the headquarters (except the sales people, who -had that open-floor concept going on). The walls of the cubicle were tall and -provided a lot of privacy and sound-proofing, except when I used the standing -desk feature (I'm over 6 feet tall, so probably not an issue for most people). - -I loved this environment, it allowed me to focus on my work with minimal -distractions, but also allowed easy access, so I could spin around in my chair -and chat with my friends without leaving my chair. This is the closest I've been -to a home office environment (which is my personal favorite, as I'll get to -later in this post). - -** Semi-Open Floor Concept - -When I shifted to my first full-time internal audit job out of college, I was -working at a company that was headquartered on a floor in a downtown high-rise -building. The company was only about 20 years old when I worked there and were -trying a lot of new things to attract young talent, one of which was a semi-open -floor concept for the office. My department worked just around the hallway -corner from the executive offices and used that "modern" layout young tech -companies started using in the 2000s/2010s. - -Each desk was brief, and you could look most coworkers in the face without -moving from your chair, I hated this so much. Directly to my left was the Chief -Audit Executive (our department's leading boss), and his desk was pointed so -that his face would stare straight at my desk all day. I spent more time -thinking about who was looking at me or checking on me than actually working. - -The other annoying part of the open concept they used was that the kitchen area -and pathways were too close to everyone's desks (since the desks were spread -out, to provide space or something), so noise and conversation would be constant -throughout the day while you try to work. For someone like me, who needs silence -to get work done, that was a non-starter. - -** Hotel Office Concept - -I currently work for a company remotely (for now) and travel to the office every -once in a while for events and to help coach the staff underneath me. The office -I visit uses the hotel desk concept, where you need to check in at a touch -screen when you enter the office and "rent" a desk for the day. The same goes -for offices and meeting rooms. - -These desks are flat-top only and do not have any walls at all. In addition, -they're stacked with one row of 4 desks facing another row of 4 desks. These -pairs of desk rows are repeated through the office. - -This means that when I go, I need to rent a random desk or try to remember the -unique identification (ID) numbers on desks I like. Once I rent it, I have to -make sure no one sat down in that desk without renting it. Then, I can sit down -and work, but will probably need to adjust the monitors so that I'm not staring -in the face of the person across from me all day. Finally, I need to wear -headphones as this environment does nothing to provide you with peace or quiet. - -Luckily, you can rent offices with doors that offer quiet and privacy, which can -be very nice if you have a lot of meetings or webinars on a certain day. - -* Home Office - -Okay, now let's finally get to the home office concept. I have worked from home -for a little over two years at this point, across three different -jobs/employers. Over this time, I have experimented with a plethora of different -organizational ideas, desks, and room layouts to find what works best for me. - -These things might not apply to you, and that's fine. Everyone has a different -situation, and I really don't think you'll know what works until you try. - -** Tip #1 - -Let's start with my top rule for a home office: - -#+begin_quote -If you live with others, working in a shared space is not effective. -#+end_quote - -It just does not work. If you have another person sleeping in your bedroom, it -is difficult to manage your work schedule with their sleeping/work/school -schedule. If they wake up after you need to start work, you might wake them up -or have to suffer the agony of staring at bright screens in a dark room. - -In a similar vein, working from a location such as the living room likely won't -work either. Distractions will come far more frequently: televisions, cooking, -cleaning, deliveries, etc. If you're like me, you'll end up playing a game -instead of actually doing any work. - -** Tip #2 - -Okay, the second thing I've discovered that works for me: - -#+begin_quote -Use the pomodoro method (or something similar) to balance work tasks -with personal tasks. -#+end_quote - -I use a very casual version of the pomodoro method where I will work for 1-2 -hours (usually set in strict intervals like 1, 1.5, 2 hours) and then will allow -myself 30-60 minutes for personal tasks. This schedule works for me, since my -work schedule really only comes to 3-6 hours of work per day. - -In this case, I'll work through my list of tasks for an hour or two and then -give myself personal time to get drinks and food, wash dishes, put clothes in -the washer, get the mail, etc. If you're in a convenient location, this usually -gives time for things like getting groceries (as long as you're not a slow -shopper). - -** Tip #3 - -While I listed this one as number three, I don't think I'd accomplish anything -without it: - -#+begin_quote -Document everything: even things you didn't before - such as task lists -and notes from casual calls or meetings. -#+end_quote - -I've noticed that staying in an office gave me more constant reminders of -outstanding tasks or facts I had learned in a conversation. Translating -everything to a digital world has made me lose a bit of that focus (perhaps -since I don't have visual reminders?). - -Keeping a running task list of all things I have to do - even potential tasks! - -has helped me keep up without missing anything small. Likewise, keeping notes -for ALL meetings and calls, no matter how casual/quick, has improved my -retention immensely. Beyond helping my mental recollection, it has saved me -numerous times when I need to do a keyword search for some topic that was -discussed 6+ months ago. - -** Tip #4 - -Okay, last one for now. - -#+begin_quote -Keep your work area clean. -#+end_quote - -This one is straightforward, but I know some people struggle with cleanliness or -may not believe it makes a difference. Trust me, keeping your desk area clean -and organized makes a huge difference, both mentally and emotionally. - -Just think about it, you walk into your home office and see a clean desk with a -laptop, dock, monitors, keyboard, mouse, and a notepad with a pen on top. - -Now imagine the opposite, there's an office with the same equipment, but there -are clothes hanging on the chair, empty drink bottles, candy wrappers and dirty -plates. This can take both a mental and emotional toll by bringing constant -disarray and stress into your working environment. - -Just keep things clean each day, and you won't need to do any big cleaning days -to recover. - -* My Preferences - -I've talked about the different environments I've worked in and expressed some -honest thoughts on pros or cons to each, but what do I prefer? Well, if you're -reading along, you should be able to tell that I much prefer a home office above -all else. - -Being able to control my own day and allot my time as needed has brought a -calmness to my life and has allowed me to maximize each day. I feel far more -effective and efficient in a home office than any other office, especially -open-office layouts. - -If I do need to return to an office part-time in the future, I really hope the -office will have privacy and quietness in order for me to get my work done. -#+date: <2022-02-10 Thu 00:00:00> -#+title: Automating Dynamic DNS Record Updates via Njalla API Using Python -#+description: Instructional material detailing automation of DNS record updates by interfacing with Njalla's API, suitable for environments with frequently changing IP addresses. -#+slug: njalla-dns-api - -* Njalla's API - -As noted in my recent post about [[https://cleberg.net/blog/ditching-cloudflare/][switching to Njalla from Cloudflare]], I was -searching for a way to replace my [[https://cleberg.net/blog/cloudflare-dns-api.html][bash script]] to update my domain's =A= record -with my home's internet protocol (IP) address dynamically. - -To reiterate what I said in those posts, this is a common necessity for those of -us who have non-static IP addresses that can change at any moment due to -internet service provider (ISP) policy. - -In order to keep a home server running smoothly, the server admin needs to have -a process to constantly monitor their public IP address and update their -domain's DNS records if it changes. - -This post explains how to use Python to update Njalla's DNS (domain name system) -records whenever a machine's public IP address changes. - -** Creating a Token - -To use Njalla's API, you will first need to create a token that will be used to -authenticate you every time you call the API (application programming -interface). Luckily, this is very easy to do if you have an account with Njalla. - -Simply go the [[https://njal.la/settings/api/][API Settings]] page and click the =Add Token= button. Next, enter a -name for the token and click =Add=. - -Finally, click the =Manage= button next to your newly created token and copy the -=API Token= field. - -** Finding the Correct API Request - -Once you have a token, you're ready to call the Njalla API for any number of -requests. For a full listing of available requests, see the [[https://njal.la/api/][Njalla API -Documentation]]. - -For this demo, we are using the =list-records= and =edit-record= requests. - -The =list-records= request requires the following payload to be sent when -calling the API: - -#+begin_src txt -params: { - domain: string -} -#+end_src - -The =edit-record= request requires the following payload to be sent when calling -the API: - -#+begin_src txt -params: { - domain: string - id: int - content: string -} -#+end_src - -* Server Set-Up - -To create this script, we will be using Python. By default, I use Python 3 on my -servers, so please note that I did not test this in Python 2, and I do not know -if Python 2 will work for this. - -** Creating the Script - -First, find a suitable place to create your script. Personally, I just create a -directory called =ddns= in my home directory: - -#+begin_src sh -mkdir ~/ddns -#+end_src - -Next, create a Python script file: - -#+begin_src sh -nano ~/ddns/ddns.py -#+end_src - -The following code snippet is quite long, so I won't go into depth on each part. -However, I suggest you read through the entire script before running it; it is -quite simple and contains comments to help explain each code block. - -*Note*: You will need to update the following variables for this to work: - -- =token=: This is the Njalla API token you created earlier. -- =user_domain=: This is the top-level domain you want to modify. -- =include_subdomains=: Set this to =True= if you also want to modify subdomains - found under the TLD (top-level domain). -- =subdomains=: If =include_subdomains= = =True=, you can include your list of - subdomains to be modified here. - -#+begin_src python -#!/usr/bin/python -# -*- coding: utf-8 -*- -# Import Python modules - -from requests import get -import requests -import json - -# Set global variables - -url = 'https://njal.la/api/1/' -token = '<your-api-token>' -user_domain = 'example.com' -include_subdomains = True -subdomains = ['one', 'two'] - - -# Main API call function - -def njalla(method, **params): - headers = {'Authorization': 'Njalla ' + token} - response = requests.post(url, json={'method': method, - 'params': params}, headers=headers).json() - if 'result' not in response: - raise Exception('API Error', response) - return response['result'] - - -# Gather all DNS records for a domain - -def get_records(domain): - return njalla('list-records', domain=user_domain) - - -# Update a DNS record for a domain - -def update_record(domain, record_id, record_content): - return njalla('edit-record', domain=domain, id=record_id, - content=record_content) - - -# Get public IP addresses - -ipv4 = get('https://api.ipify.org').text -print('IPv4: {}'.format(ipv4)) -ipv6 = get('https://api64.ipify.org').text -print('IPv6: {}'.format(ipv6)) - -# Call API to get all DNS records - -data = get_records(user_domain) - -# Loop through records and check if each one is IPv4 (A) or IPv6 (AAAA) -# Update only if DNS is different from server IP - -for record in data['records']: - if record['name'] == '@' or (include_subdomains and record['name'] \ - in subdomains): - if record['type'] == 'A': - if record['content'] == ipv4: - print(record['type'], 'record for', record['name'], - 'already matches public IPv4 address. Skipping...' - ) - else: - print('IPv4 of', ipv4, - 'does not match Njalla's value of', - record['content'], '. Updating...') - update_record(user_domain, record['id'], ipv4) - elif record['type'] == 'AAAA': - if record['content'] == ipv6: - print(record['type'], 'record for', record['name'], - 'already matches public IPv6 address. Skipping...' - ) - else: - print('IPv6 of', ipv6, - 'does not match Njalla's value of', - record['content'], '. Updating...') - update_record(user_domain, record['id'], ipv6) -#+end_src - -** Running the Script - -Once you've created the script and are ready to test it, run the following -command: - -#+begin_src sh -python3 ~/ddns/ddns.py -#+end_src - -** Setting the Script to Run Automatically - -To make sure the scripts run automatically, add it to the =cron= file so that it -will run on a schedule. To do this, open the =cron= file: - -#+begin_src sh -crontab -e -#+end_src - -In the cron file, paste the following at the bottom of the editor in order to -check the IP every five minutes: - -#+begin_src sh -*/5 * * * * python3 /home/<your_username>/ddns/ddns.py -#+end_src -#+date: <2022-02-16 Wed 00:00:00> -#+title: Switching to Debian and Nginx: A Modern Web and Gemini Server Migration Walkthrough -#+description: Step-by-step protocol for transitioning web server infrastructure to Debian operating system, including installation, configuration, and security hardening of Nginx and Agate services. -#+slug: debian-and-nginx - -* Server Operating System (OS): Debian - -I've used various Linux distributions throughout the years, but I've never used -anything except Ubuntu for my servers. Why? I really have no idea, mostly just -comfort around the commands and software availability. - -However, I have always wanted to try Debian as a server OS after testing it out -in a VM a few years ago (side-note: I'd love to try Alpine too, but I always -struggle with compatibility). So, I decided to launch a new VPS and use [[https://www.debian.org][Debian]] -11 as the operating system (OS). Spoiler alert: it feels identical to Ubuntu for my purposes. - -I did the normal things when first launching the VPS (virtual private server), -such as adding a new user, locking down SSH (secure shell protocol), etc. If you -want to see that level of detail, read my other post about [[https://cleberg.net/blog/how-to-set-up-a-vps-web-server/][How to Set Up a VPS -Web Server]]. - -All of this has been similar, apart from small things such as the location of -users' home folders. No complaints at all from me - Debian seems great. - -* Web Server: Nginx - -Once I had the baseline server configuration set-up for Debian, I moved on to -trying out [[https://nginx.org][Nginx]] as my web server software. This required me to install the -=nginx= and =ufw= packages, as well as setting up the initial UFW (Uncomplicated -Firewall) config: - -#+begin_src sh -sudo apt install nginx ufw -sudo ufw allow 'Nginx Full' -sudo ufw allow SSH -sudo ufw enable -sudo ufw status -sudo systemctl status nginx -#+end_src - -Once I had the firewall set, I moved on to creating the directories and files -for my website. This is very easy and is basically the same as setting up an -Apache server, so no struggles here. - -#+begin_src sh -sudo mkdir -p /var/www/your_domain/html -sudo chown -R $USER:$USER /var/www/your_domain/html -sudo chmod -R 755 /var/www/your_domain -nano /var/www/your_domain/html/index.html -#+end_src - -The next part, creating the Nginx configuration files, is quite a bit different -from Apache. First, you need to create the files in the =sites-available= folder -and symlink it the =sites-enabled= folder. - -Creating the configuration file for your domain: - -#+begin_src sh -sudo nano /etc/nginx/sites-available/your_domain -#+end_src - -Default content for an Nginx configuration file: - -#+begin_src sh -server { - listen 80; - listen [::]:80; - - root /var/www/your_domain/html; - index index.html index.htm index.nginx-debian.html; - - server_name your_domain www.your_domain; - - location / { - try_files $uri $uri/ =404; - } -} -#+end_src - -Finally, symlink it together: - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/your_domain /etc/nginx/sites-enabled/ -#+end_src - -This will make your site available to the public (as long as you have -=your_domain= DNS (Domain Name System) records pointed at the server's IP address)! - -Next, I used [[https://certbot.eff.org/][certbot]] to issue an HTTPS (Hypertext Transfer Protocol Secure) -certificate for my domains using the following commands: - -#+begin_src sh -sudo apt install snapd; sudo snap install core; sudo snap refresh core -sudo snap install --classic certbot -sudo ln -s /snap/bin/certbot /usr/bin/certbot -sudo certbot --nginx -#+end_src - -Now that =certbot= ran successfully and updated my Nginx configuration files to -include a =443= server block of code, I went back in and edited the -configuration file to include security HTTP headers. This part is optional, but -is recommended for security purposes; you can even test a website's HTTP header -security at [[https://securityheaders.com/][Security Headers]]. - -The configuration below shows a set-up where you only want your website to serve -content from its own domain, except for images and scripts, which may come from -=nullitics.com=. All other content would be blocked from loading in a browser. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/your_domain -#+end_src - -#+begin_src sh -server { - ... - add_header Content-Security-Policy "default-src 'none'; img-src 'self' https://nullitics.com; script-src 'self' https://nullitics.com; style-src 'self'; font-src 'self'"; - add_header X-Content-Type-Options "nosniff"; - add_header X-XSS-Protection "1; mode=block"; - add_header X-Frame-Options "DENY"; - add_header Strict-Transport-Security "max-age=63072000; includeSubDomains"; - add_header Referrer-Policy "no-referrer"; - ... -} -#+end_src - -#+begin_src sh -sudo systemctl restart nginx -#+end_src - -** Nginx vs. Apache - -As I stated at the beginning, my historical hesitation with trying Nginx was -that the differences in configuration formats scared me away from leaving -Apache. However, I prefer Nginx to Apache for a few reasons: - -1. Nginx uses only one configuration file (=your_domain=) vs. Apache's two-file - approach for HTTP vs. HTTPS (=your_domain.conf= and - =your_domain-le-ssl.conf=). -2. Symlinking new configurations files and reloading Nginx are way easier than - Apache's process of having to enable headers with =a2enmod mod_headers=, - enable PHP with =a2enmod php= (plus any other mods you need), and then - enabling sites with =a2ensite=, and THEN reloading Apache. -3. The contents of the Nginx configuration files seem more organized and logical - with the curly-bracket approach. This is a minor reason, but everything just - felt cleaner while I was installing my sites and that had a big quality of - life impact on the installation for me. - -They're both great software packages, but Nginx just seems more organized and -easier to use these days. I will certainly be exploring the Nginx docs to see -what other fun things I can do with all of this. - -* Gemini Server: Agate - -Finally, I set up the Agate software on this server again to host my Gemini -server content, using Rust as I have before. You can read my other post for more -information on installing Agate: [[https://cleberg.net/blog/hosting-a-gemini-server/][Hosting a Gemini Server]]. - -All in all, Debian + Nginx is very slick and I prefer it over my old combination -of Ubuntu + Apache (although it's really just Nginx > Apache for me, since -Debian seems mostly the same as Ubuntu is so far). -#+date: <2022-02-17 Thu 00:00:00> -#+title: Protect Your Privacy: Automating Image Metadata Removal Using Exiftool -#+description: Technical instructions for utilizing Exiftool to systematically strip metadata from image files to ensure privacy and reduce file size. -#+slug: exiftool - -** Why Strip Metadata? - -Okay, so you want to strip metadata from your photos. Perhaps you take pictures -of very rare birds, and the location metadata is a gold mine for poachers, or -perhaps you're just privacy-oriented like me and prefer to strip metadata from -publicly-available images. - -There are various components of image metadata that you may want to delete -before releasing a photo to the public. Here's an incomplete list of things I -could easily see just by inspecting a photo on my laptop: - -- Location (Latitude & Longitude) -- Dimensions -- Device Make & Model -- Color Space -- Color Profile -- Focal Length -- Alpha Channel -- Red Eye -- Metering Mode -- F Number - -Regardless of your reasoning, I'm going to explain how I used the =exiftool= -package in Linux to automatically strip metadata from all images in a directory -(+ subdirectories). - -** Installing =exiftool= - -First things first: we need to install the tool. I'm running Debian 11 on my -server (Ubuntu will work the same), so the command is as simple as: - -#+begin_src sh -sudo apt install exiftool -#+end_src - -There are different tools that can accomplish the same thing across -distributions, but I really only care to test out this one package. - -** Recursively Strip Data - -I actually use this tool extensively to strip any photos uploaded to the website -that serves all the images for my blog (=img.cleberg.net=). - -The following command is incredibly useful and can be modified to include any -image extensions that =exiftool= supports: - -#+begin_src sh -exiftool -r -all= -ext jpg -ext png /path/to/directory/ -#+end_src - -The output of the command will let you know how many directories were scanned, -how many images were updated, and how many images were unchanged. -#+date: <2022-02-20 Sun 00:00:00> -#+title: How to Configure Nginx for Efficient Static Content Caching -#+description: Detailed methods for configuring Nginx to cache static resources such as CSS, JavaScript, and images to improve website loading times and resource efficiency. -#+slug: nginx-caching - -* Update Your Nginx Config to Cache Static Files - -If you run a website on Nginx that serves static content (i.e., content that is -not dynamic and changing with interactions from the user), you would likely -benefit from caching that content on the client-side. If you're used to Apache -and looking for the Nginx equivalent, this post should help. - -Luckily, setting up the cache is as easy as identifying the file types you want -to cache and determining the expiration length. To include more file types, -simply use the bar separator (=|=) and type the new file extension you want to -include. - -#+begin_src config -server { - ... - - location ~** .(css|js|jpg|jpeg|gif|png|ico)$ { - expires 30d; - } - - ... -} -#+end_src - -I have seen some people who prefer to set =expires= as =365d= or even =max=, but -that is only for stable, infrequently changing websites. As my site often -changes (i.e., I'm never content with my website), I need to know that my -readers are seeing the new content without waiting too long. - -So, I went ahead and set the expiration date at =30d=, which is short enough to -refresh for readers but long enough that clients/browsers won't be re-requesting -the static files too often, hopefully resulting in faster loading times, as -images should be the only thing slowing down my site. - -* Testing Results - -To test my changes to the Nginx configuration, I used the [[https://addons.mozilla.org/en-US/firefox/addon/http-header-live/][HTTP Header Live]] -extension on my Gecko browser and used the sidebar to inspect the headers of a -recent image from my blog. - -In the image below, you can see that the =Cache-Control= header is now present -and set to 2592000, which is 30 days represented in seconds (30 days _ 24 -hours/day _ 60 minutes/hour ** 60 seconds/minute = 2,592,000 seconds). - -The =Expires= field is now showing 22 March 2022, which is 30 days from the day -of this post, 20 February 2022. - -* Caveats - -Remember that this caching system is *client-side*, which means that content is -only cached for as long as a client allows it. For example, my browser purges -all caches, data, etc. upon exit, so this caching policy will only work as long -as my browser remains open and running. - -If you need to test updates to your site, you'll need to clear the cache to see -updates for any file extension you configured. This can often be done with the -=Shift + F5= or =Ctrl + F5= key combinations in most browsers. -#+date: <2022-02-22 Tue 00:00:00> -#+title: Twosday: Exploring the Unique Palindromic Date of 2-22-22 -#+description: Examination of the date Tuesday, February 22, 2022, highlighting the palindromic properties and expected observations on this specific calendar occurrence. -#+slug: tuesday - -* Tuesday, Twosday - -I'm taking a break from my usual technology-related posts and writing about -something a little more enjoyable today. - -Today is Tuesday, February 22nd, 2022. Today is 02-22-2022. Today is Twosday. - -Let's look at everything that fell in place today: - -1. Written in the =m-dd-yy= or =dd-m-yy= formats, today is 2-22-22 or 22-2-22, - which is a neat little palindrome in either format. (The last ubiquitous - six-digit palindrome was 1-11-11.) -2. Today is Tuesday, which is why everyone is using the nickname Twosday to call - out these similarities. -3. Falling on Tuesday means today is the 2nd day of the week (for most cultures. - For the US, it's the 3rd day of the week since we start on Sunday). -4. The only culture I could find with a connection to a =2= is that some Slavic - languages derived their version of Tuesday from the Old Church Slavonic word - =въторъ=, meaning "the second." -5. Written in the classic monospaced, digital font (think of digital clocks from - the 80s/90s), there is nice symmetry to the numbers ([[https://img.cleberg.net/blog/20220222-tuesday/digital_font.webp][view the image here]]!). -6. This one isn't naturally-occurring, but it seems people around the world are - celebrating the day. For example, a group is putting together [[https://www.eventbrite.com/e/2-22-22-a-collective-wedding-ceremony-at-the-state-capitol-tickets-211434605597][a wedding of - 222 couples at the California State Capitol in Sacramento]], concluding at - exactly 2:22 PM. These couples will record their marriage dates as 2-22-22 - 2:22 PM. Tickets were on sale for $222.22. -#+date: <2022-03-02 Wed 00:00:00> -#+title: Reliable Note-Taking with Markdown: Methods for Efficient and Portable Notes -#+description: Instructions on applying standardized note-taking procedures with Markdown format, including synchronization and cross-platform compatibility considerations. -#+slug: reliable-notes - -* Choosing Durable File Formats - -#+begin_quote -TL;DR (Too Long; Didn't Read): Write in a format that can be easily rendered and -read in plain-text mode (e.g., =.txt=, =.md=, etc.). -#+end_quote - -As I've written more and more over the years, I've found that my love of -note-taking is always growing. Everything I learn or need to remember can be -written down in a note and saved digitally, with no cost to myself. Unlike paper -copies that need physical storage space, digital files simply need space on your -local disk or cloud storage, which is fairly abundant these days. - -However, I had a historical struggle with migration of notes between different -apps that require different formats and applied proprietary styling. This meant -that I had to go through each note during migration and edit the file to look -presentable again. - -For the last year or two, I have written everything exclusively in [[https://en.wikipedia.org/wiki/Markdown][Markdown]] -format. Small notes, long-form writings, and even these blog posts are all -written in Markdown. - -Why Markdown? While I do appreciate the simplicity of plain-text files without -any formatting, I often need visual cues such as heading and code blocks to keep -my thoughts straight. Markdown provides a minimal set of styling indicators for -me to style my notes without adding any proprietary, embedded data into the -files. If I want a top-level heading, I simply add a hash (=#=) before the line. -An added bonus is that even if a system doesn't understand Markdown, it will -render it as plain-text and I can read it just as easily. - -For example, here's how TextEdit on macOS will open and display a Markdown file -in plain-text, since it does contain any features to preview Markdown as HTML: - -#+caption: Plain Text Markdown -#+attr_html: :alt A view of the README.md from the cleberg.net repository. -[[https://img.cleberg.net/blog/20220302-easy-reliable-note-taking/plain_markdown.webp]] - -** Saving & Syncing Files - -In order to read and edit my notes across platforms, I use my personal cloud -storage through Tresorit due to its native integration with macOS and iOS file -managers. In addition, Tresorit works well on Debian-based Linux distributions, -which I used before macOS (and will likely switch back to in a few years). - -You can use whatever sync software you want - syncing plain-text or markdown -files is incredibly easy and fast, since the files are generally tiny. - -Since the cloud storage syncs files automatically, there is no need for me to -sync anything manually or kick-off a sync job to update my files. This means -that I can edit on mobile, and it takes about 5-10 seconds to see the changes on -desktop. - -*** Version Control with Git -:PROPERTIES: -:CUSTOM_ID: version-control-with-git -:END: -A different approach I've contemplated is storing my notes and attachments is -using a hosted Git repository to track changes to the files. However, I don't -want to rely on an external service that could potentially see into my data, -even if the repository is private. - -I might just do =git init= locally and then commit my changes each time I write -or update a note, but that seems to be a lot of work just for tracking changes - -which I don't necessarily care to know. - -*** Backups! -:PROPERTIES: -:CUSTOM_ID: backups -:END: -One small addition to the storage/sync conversation is the idea of backups. -Personally, I manually create periodic backups of my entire cloud storage, -compress it into an archive, and store it on my home server. - -To improve my workflow, I am going to be exploring options to automatically -compress the mounted cloud directory and send it over to my server on a set -schedule. - -** Writing on Desktop - -#+begin_quote -*Update (06.14.22)*: Since writing this post, I have reverted to simply keeping -my =notes= folder open and opening notes individually in TextEdit for a more -minimal and relaxing writing experience on the desktop. -#+end_quote - -The bulk of my writing occurs in a desktop environment, with a full keyboard -layout and wide screen. I don't illustrate with a smart pen, I rarely use -embedded images, and I love being able to see all of my notes/directories in a -sidebar. - -With this simple set of requirements, I chose [[https://obsidian.md][Obsidian]] as my desktop text -editor. Obsidian has some in-depth tools like a graph view, command palette, -mentions, etc., but I've found that using it as a simple Markdown editor is -incredibly easy and straightforward. - -Here's an example of how my Markdown notes look when opened in plain-text mode: - -#+caption: Obsidian Markdown Source Mode -#+attr_html: :alt Markdown source mode, showing the symbols used by markdown to markup text. -[[https://img.cleberg.net/blog/20220302-easy-reliable-note-taking/obsidian_source_mode.webp]] - -Here's the "live preview" version, where the Markdown is rendered into its HTML -format: - -#+caption: Obsidian Markdown Live Preview -#+attr_html: :alt Markdown preview mode, hiding all symbols used in Markdown syntax. -[[https://img.cleberg.net/blog/20220302-easy-reliable-note-taking/obsidian_live_preview.webp]] - -*** Programming on Desktop - -While I was writing this, I realized I should specify that I don't use the same -editor for writing notes and for writing code. For programming purposes, I use -[[https://vscodium.com][VSCodium]] as my development IDE. - -** Writing on Mobile - -Personally, I write very little on mobile, except when needing to take important -notes on-the-go. Any long-form writing, journals, etc. are done at home, where I -always have my laptop available. - -I wanted a simple and foolproof editor for iOS, preferably open-source. After a -long journey of testing the few (& terrible) open-source iOS note-taking apps, I -finally found a phenomenal one: [[https://github.com/simonbs/runestone][Runestone]]. This app is fantastic for -note-taking, has plenty of optional features, and integrates natively with the -iOS file manager. - -This app opens the iOS file manager and allows you to click any file you want, -opens it up in an editor, and lets me save and close out of that note. - -Quite simple but effective. -#+date: <2022-03-03 Thu 00:00:00> -#+title: From Spreadsheets to Databases: Creating a Custom Financial Tracker with Python -#+description: Procedures for creating and maintaining a personal financial database utilizing SQLite, Python programming language, and Jupyter Notebook interface. -#+slug: financial-database - -* Personal Financial Tracking - -For the last 6-ish years, I've tracked my finances in a spreadsheet. This is -common practice in the business world, but any good dev will cringe at the -thought of storing long-term data in a spreadsheet. A spreadsheet is not for -long-term storage or as a source of data to pull data/reports. - -As I wanted to expand the functionality of my financial data (e.g., adding more -reports), I decided to migrate the data into a database. To run reports, I would -query the database and use a language like Python or Javascript to process the -data, perform calculations, and visualize the data. - -* SQLite - -When choosing the type of database I wanted to use for this project, I was split -between three options: - -1. MySQL: The database I have the most experience with and have used for years. -2. PostgreSQL: A database I'm new to, but want to learn. -3. SQLite: A database that I've used for a couple projects and have moderate - experience. - -I ended up choosing SQLite since it can be maintained within a single =.sqlite= -file, which allows me more flexibility for storage and backup. I keep this file -in my cloud storage and pull it up whenever needed. - -** Visual Editing - -Since I didn't want to try and import 1000--1500 records into my new database -via the command line, I opted to use [[https://sqlitebrowser.org/][DB Browser for SQLite (DB4S)]] as a GUI -(graphical user interface) tool. This application is excellent, and I don't see -myself going back to the CLI (command line interface) when working in this -database. - -DB4S allows you to copy a range of cells from a spreadsheet and paste it -straight into the SQL table. I used this process for all 36 accounts, 1290 -account statements, and 126 pay statements. Overall, I'm guessing this took -anywhere between 4--8 hours. In comparison, it probably took me 2-3 days to -initially create the spreadsheet. - -** Schema - -The schema for this database is actually extremely simple and involves only -three tables (for now): - -1. Accounts -2. Statements -3. Payroll - -*Accounts* - -The Accounts table contains summary information about an account, such as a car -loan or a credit card. By viewing this table, you can find high-level data, such -as interest rate, credit line, or owner. - -#+begin_src sql -CREATE TABLE "Accounts" ( - "AccountID" INTEGER NOT NULL UNIQUE, - "AccountType" TEXT, - "AccountName" TEXT, - "InterestRate" NUMERIC, - "CreditLine" NUMERIC, - "State" TEXT, - "Owner" TEXT, - "Co-Owner" TEXT, - PRIMARY KEY("AccountID" AUTOINCREMENT) -) -#+end_src - -*Statements* - -The Statements table uses the same unique identifier as the Accounts table, -meaning you can join the tables to find a monthly statement for any of the -accounts listed in the Accounts table. Each statement has an account identified -(ID), statement date, and total balance. - -#+begin_src sql -CREATE TABLE "Statements" ( - "StatementID" INTEGER NOT NULL UNIQUE, - "AccountID" INTEGER, - "StatementDate" INTEGER, - "Balance" NUMERIC, - PRIMARY KEY("StatementID" AUTOINCREMENT), - FOREIGN KEY("AccountID") REFERENCES "Accounts"("AccountID") -) -#+end_src - -*Payroll* - -The Payroll table is a separate entity, unrelated to the Accounts or Statements -tables. This table contains all information you would find on a pay statement -from an employer. As you change employers or obtain new perks/benefits, just add -new columns to adapt to the new data. - -#+begin_src sql -CREATE TABLE "Payroll" ( - "PaycheckID" INTEGER NOT NULL UNIQUE, - "PayDate" TEXT, - "Payee" TEXT, - "Employer" TEXT, - "JobTitle" TEXT, - "IncomeRegular" NUMERIC, - "IncomePTO" NUMERIC, - "IncomeHoliday" NUMERIC, - "IncomeBonus" NUMERIC, - "IncomePTOPayout" NUMERIC, - "IncomeReimbursements" NUMERIC, - "FringeHSA" NUMERIC, - "FringeStudentLoan" NUMERIC, - "Fringe401k" NUMERIC, - "PreTaxMedical" NUMERIC, - "PreTaxDental" NUMERIC, - "PreTaxVision" NUMERIC, - "PreTaxLifeInsurance" NUMERIC, - "PreTax401k" NUMERIC, - "PreTaxParking" NUMERIC, - "PreTaxStudentLoan" NUMERIC, - "PreTaxOther" NUMERIC, - "TaxFederal" NUMERIC, - "TaxSocial" NUMERIC, - "TaxMedicare" NUMERIC, - "TaxState" NUMERIC, - PRIMARY KEY("PaycheckID" AUTOINCREMENT) -) -#+end_src - -** Python Reporting - -Once I created the database tables and imported all my data, the only step left -was to create a process to report and visualize on various aspects of the data. - -In order to explore and create the reports I'm interested in, I utilized a -two-part process involving Jupyter Notebooks and Python scripts. - -*** Step 1: Jupyter Notebooks - -When I need to explore data, try different things, and re-run my code -cell-by-cell, I use Jupyter Notebooks. For example, I explored the =Accounts= -table until I found the following useful information: - -#+begin_src python -import sqlite3 -import pandas as pd -import matplotlib - -# Set up database filename and connect -db = "finances.sqlite" -connection = sqlite3.connect(db) -df = pd.read_sql_query("SELECT ** FROM Accounts", connection) - -# Set global matplotlib variables -%matplotlib inline -matplotlib.rcParams['text.color'] = 'white' -matplotlib.rcParams['axes.labelcolor'] = 'white' -matplotlib.rcParams['xtick.color'] = 'white' -matplotlib.rcParams['ytick.color'] = 'white' -matplotlib.rcParams['legend.labelcolor'] = 'black' - -# Display graph -df.groupby(['AccountType']).sum().plot.pie(title='Credit Line by Account Type', y='CreditLine', figsize=(5,5), autopct='%1.1f%%') -#+end_src - -*** Step 2: Python Scripts - -Once I explored enough through the notebooks and had a list of reports I wanted, -I moved on to create a Python project with the following structure: - -#+begin_src txt -finance/ -├── notebooks/ -│ │ ├── account_summary.ipynb -│ │ ├── account_details.ipynb -│ │ └── payroll.ipynb -├── public/ -│ │ ├── image-01.png -│ │ └── image-0X.png -├── src/ -│ └── finance.sqlite -├── venv/ -├── _init.py -├── database.py -├── process.py -├── requirements.txt -└── README.md -#+end_src - -This structure allows me to: - -1. Compile all required python packages into =requirements.txt= for easy - installation if I move to a new machine. -2. Activate a virtual environment in =venv/= so I don't need to maintain a - system-wide Python environment just for this project. -3. Keep my =notebooks/= folder to continuously explore the data as I see fit. -4. Maintain a local copy of the database in =src/= for easy access. -5. Export reports, images, HTML files, etc. to =public/=. - -Now, onto the differences between the code in a Jupyter Notebook and the actual -Python files. To create the report in the Notebook snippet above, I created the -following function inside =process.py=: - -#+begin_src python -# Create summary pie chart -def summary_data(accounts: pandas.DataFrame) -> None: - accounts_01 = accounts[accounts["Owner"] == "Person01"] - accounts_02 = accounts[accounts["Owner"] == "Person02"] - for x in range(1, 4): - if x == 1: - df = accounts - account_string = "All Accounts" - elif x == 2: - df = accounts_01 - account_string = "Person01's Accounts" - elif x == 3: - df = accounts_02 - account_string = "Person02's Accounts" - print(f"Generating pie chart summary image for {account_string}...") - summary_chart = ( - df.groupby(["AccountType"]) - .sum() - .plot.pie( - title=f"Credit Line by Type for {account_string}", - y="CreditLine", - autopct="%1.1f%%", - ) - ) - summary_chart.figure.savefig(f"public/summary_chart_{x}.png", dpi=1200) -#+end_src - -The result? A high-quality pie chart that is read directly by the -=public/index.html= template I use. - -Other charts generated by this project include: - -- Charts of account balances over time. -- Line chart of effective tax rate (taxes divided by taxable income). -- Salary projections and error limits using past income and inflation rates. -- Multi-line chart of gross income, taxable income, and net income. - -The best thing about this project? I can improve it at any given time, shaping -it into whatever helps me the most for that time. I imagine that I will be -introducing an asset tracking table soon to track the depreciating value of -cars, houses, etc. Who knows what's next? -#+date: <2022-03-08 Tue 00:00:00> -#+title: Migrating Plex Media Server to New Hardware with Nvidia GPU Setup -#+description: Stepwise instructions for transferring Plex Media Server to new hardware and enabling Nvidia GPU transcoding to optimize media processing performance. -#+slug: plex-migration - -* Migration Phases - -I recently decided to migrate my server from an old OptiPlex desktop machine to -a custom-built tower with better hardware in every category. In order to do -this, I would need to properly migrate a full Plex installation. - -The second part of this migration is that the new server uses an Nvidia GPU -(graphics processing unit) and does not have any integrated graphics, which -requires extra work for installation, but provides much better hardware -transcoding options for Plex. - -Therefore, I have broken this migration down into three phases: - -1. Configure the New Server -2. Migrate Plex Data & Devices -3. Configure GPU Transcoding - -* Phase 1: Configure the New Server - -** Choosing an Operating System (OS) - -In order to migrate Plex to my new server, I first needed to choose an -appropriate OS and install it on the machine. Given that I have encountered -numerous issues installing other Linux distributions properly with Nvidia -graphics, I chose [[https://ubuntu.com/download/server][Ubuntu Server]]. - -The first step is to create a bootable USB (universal serial bus) with Ubuntu -Server. This is easy with [[https://www.balena.io/etcher/][Etcher]], an app that runs on many different platforms. -Just download the Ubuntu Server =.iso= image, launch Etcher, and install the -=.iso= on the USB. - -Once the USB is created, insert it into my server, reboot, and click =Esc= (or -any of the =F1-12= keys) until the BIOS (Basic Input/Output System) menu -appears. Finally, launch the USB boot drive. - -** Booting with Nvidia - -In order to install Ubuntu Server with an Nvidia Graphics card (and no -integrated graphics on this device for some reason), you'll have to configure -the boot menu to allow different graphics drivers to be loaded. - -When booting from the USB, the machine will launch the initial installation -menu. From this menu, type =e= to view the default command options that come -with the device - it's a good idea to take a photo of this screen, so you can -enter these commands on the next screen (along with adding support for Nvidia). - -Finally, type =Ctrl + C= to enter the command line. From this command line, -enter the commands found on the =e= screen. Remember to add =nomodeset= to the -=linux ...= line so that your Nvidia device will display the installation -screens properly! - -Here's an example of the commands I pulled from the =e= screen and entered on -the command line. - -#+begin_src sh -setparams 'Install Ubuntu Server' -setgfxpayload=keep -linux /casper/vmlinuz quiet nomodeset --- -initrd /casper/initrd -boot -#+end_src - -Once the machine is rebooted, enter the =e= screen again and add =nomodeset= to -the =linux ...= line again and press =Ctrl + X= to save the boot options. - -The machine is now fully installed and can properly display on an external -display using the Nvidia GPU. - -Always remember to update and upgrade on a new installation: - -#+begin_src sh -sudo apt update; sudo apt upgrade -y; sudo apt autoremove -y -#+end_src - -* Phase 2: Migrate Plex Data & Devices - -This phase uses the great Plex article on migrations ([[https://support.plex.tv/articles/201370363-move-an-install-to-another-system/][Move an Installation to -Another System]]) and adds a bit more information to help with commands and -context. - -** Terminology - -- *Source:* The original server that is being replaced. -- *Destination:* The new server. -- *Client:* Any application that can be used to modify settings for both - source/destination. - -** Step 01: [Client] Update Settings - -Open up a Plex app and /disable/ the =Account= > =Library= > =Empty trash -automatically after every scan= preference for the source server. - -** Step 02: [Destination] Install Plex - -Open up the [[https://www.plex.tv/media-server-downloads/][Plex Media Server download page]] and copy the link for the -appropriate platform. - -Execute the following commands on the destination server to install Plex: - -#+begin_src sh -wget <url> -sudo dpkg -i <filename> -sudo systemctl stop plexmediaserver.service -#+end_src - -** Step 03: [Source] Stop Plex & Migrate Data - -First, stop the Plex service so that no data is created or modified during the -migration. - -#+begin_src sh -sudo systemctl stop plexmediaserver.service -#+end_src - -Next, copy the data to the new server. To find where the Plex data directory is -located, Plex has another excellent article available: [[https://support.plex.tv/articles/202915258-where-is-the-plex-media-server-data-directory-located/][Where is the Plex Media -Server data directory located?]]. - -There are many ways to copy the data to the new server and will largely depend -on the size of the folder being copied. Personally, my data folder was ~23GB and -I opted to simply use the =scp= command to copy the files over SSH (Secure Shell -Protocol). - -This process was throttled by the old server's slow hard disk and ports and took -approximately 90 minutes to complete. In comparison, moving the data from the -new server's =home/user/= directory to the =/var/.../Plex Media Server= -directory took 2-3 minutes. - -#+begin_src sh -scp -r "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server" [email protected]:"'/path/to/destination/'" -#+end_src - -** Step 04: [Destination] Update File Permissions - -In case you move the data directory to a common area on the new server, it will -have to be moved to the proper location before Plex can function properly: - -#+begin_src sh -mv "Plex Media Server" /var/lib/plexmediaserver/Library/Application Support/ -#+end_src - -To ensure permissions were retained properly, the server will need to show that -all files and folders in the data directory are owned by =plex:plex= (or -whichever user is running the Plex application). - -#+begin_src sh -sudo chown -R plex:plex "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server" -#+end_src - -Finally, start the service and check the status. - -#+begin_src sh -sudo systemctl start plexmediaserver.service -sudo systemctl status plexmediaserver.service -#+end_src - -** Step 05: [Client] Update Libraries & Metadata - -The first step - now that the new server is up and running - is to sign out of -the client and sign back in. Once this is done, update any library locations, if -necessary. This was unnecessary in my case since I simply moved my storage -drives from the source server to the destination server. - -Next, perform the following actions in the client: - -1. On the left sidebar, click =More= > Three-Dot Menu > =Scan Library Files= -2. /Enable/ the =Account= > =Library= > =Empty trash automatically after every - scan= preference for the source server. -3. On the left sidebar, click =More= > Three-Dot Menu > =Manage Server= > =Empty - Trash= -4. On the left sidebar, click =More= > Three-Dot Menu > =Manage Server= > =Clean - Bundles= -5. On the left sidebar, click =More= > Three-Dot Menu > =Manage Server= > - =Optimize Database= - -Finally, double-check the Remote Access settings to make sure no changes have -caused issues with accessing the server from outside the network. - -In my case, I use a single port forwarding rule in my router and needed to -update the Local LAN (local area network) IP (internet protocol) Address to the -new server IP address. - -* Phase 3: Configure GPU Transcoding - -The final piece to the migration is enabling hardware transcoding so that Plex -can fully utilize the new Nvidia GPU available in the server. The first step is -to install Nvidia graphics drivers. This process may take a few minutes, but the -commands are pretty simple: - -#+begin_src sh -sudo add-apt-repository ppa:graphics-drivers/ppa -sudo apt update -sudo apt-get install ubuntu-drivers-common -sudo ubuntu-drivers autoinstall -#+end_src - -Finally, reboot so that the changes are loaded: - -#+begin_src sh -sudo reboot now -#+end_src - -To ensure that the Nvidia graphics drivers are working properly, run the -following command to view the available GPUs, statistics, and processes: - -#+begin_src sh -sudo nvidia-smi -#+end_src - -Finally, enable hardware transcoding settings in the Plex application to finish -the process. -#+date: <2022-03-23 Wed 00:00:00> -#+title: Dynamic DNS Record Updates via Cloudflare API -#+description: Command-line procedures to automate updating of DNS A and AAAA records by interfacing with the Cloudflare API, suitable for environments with variable IP addresses. -#+slug: cloudflare-dns-api - -* DDNS: Dynamic DNS -:PROPERTIES: -:CUSTOM_ID: ddns-dynamic-dns -:END: -If you're hosting a service from a location with DDNS (Dynamic Domain Name -System), where your internet protocol (IP)address may change at any time, you -must have a solution to update the DNS (Domain Name System) so that you can -access your service even when the IP of the server changes. - -The process below uses the [[https://api.cloudflare.com/][Cloudflare API]] (application programming interface) to -update DNS =A= and =AAAA= records with the server's current IP. If you use -another DNS provider, you will have to find a way to update your DNS (or find a -way to get a static IP). - -First, install =jq= since we will use it in the next script: - -#+begin_src sh -sudo apt install jq -#+end_src - -Next, create a location for your DDNS update scripts and open the first script: - -#+begin_src sh -mkdir ~/ddns -nano ~/ddns/update.sh -#+end_src - -The following =update.sh= script will take all of your domains and subdomains -and check Cloudflare to see if the current =A= and =AAAA= records match your -server's IP address. If not, it will update the records. - -#+begin_src sh -# file: update.sh -#!/bin/bash - -# Update TLDs -domains=(example.com example.net) - -for domain in "${domains[@]}" -do - echo -e "\nUpdating $domain..." - zone_name=$domain /home/<your-username>/ddns/ddns.sh -done - -# Update subdomains for example.com -domain=example.com -subdomains=(photos.example.com) - -for subdomain in "${subdomains[@]}" -do - echo -e "\nUpdating $subdomain..." - zone_name=$domain dns_record=$subdomain /home/<your-username>/ddns/ddns.sh -done -#+end_src - -Next, open up the =ddns.sh= script. Paste the following into the script and -update the =api_token= and =email= variables. - -#+begin_src sh -nano ~/ddns/ddns.sh -#+end_src - -*Note*: If you want your DNS records to be proxied through Cloudflare, find and -update the following snippet: ="proxied":false}"= to say =true= instead of -=false=. - -#+begin_src sh -# file: ddns.sh -#!/bin/bash -# based on https://gist.github.com/Tras2/cba88201b17d765ec065ccbedfb16d9a -# initial data; they need to be filled by the user -## API token -api_token=<YOUR_API_TOKEN> -## email address associated with the Cloudflare account -email=<YOUR_EMAIL> - -# get the basic data -ipv4=$(curl -s -X GET -4 https://ifconfig.co) -ipv6=$(curl -s -X GET -6 https://ifconfig.co) -user_id=$(curl -s -X GET "https://api.cloudflare.com/client/v4/user/tokens/verify" \ - -H "Authorization: Bearer $api_token" \ - -H "Content-Type:application/json" \ - | jq -r '{"result"}[] | .id' - ) - -echo "Your IPv4 is: $ipv4" -echo "Your IPv6 is: $ipv6" - -# check if the user API is valid and the email is correct -if [ $user_id ] -then - zone_id=$(curl -s -X GET "https://api.cloudflare.com/client/v4/zones?name=$zone_name&status=active" \ - -H "Content-Type: application/json" \ - -H "X-Auth-Email: $email" \ - -H "Authorization: Bearer $api_token" \ - | jq -r '{"result"}[] | .[0] | .id' - ) - # check if the zone ID is - if [ $zone_id ] - then - # check if there is any IP version 4 - if [ $ipv4 ] - then - dns_record_a_id=$(curl -s -X GET "https://api.cloudflare.com/client/v4/zones/$zone_id/dns_records?type=A&name=$dns_record" \ - -H "Content-Type: application/json" \ - -H "X-Auth-Email: $email" \ - -H "Authorization: Bearer $api_token" - ) - # if the IPv6 exist - dns_record_a_ip=$(echo $dns_record_a_id | jq -r '{"result"}[] | .[0] | .content') - echo "The set IPv4 on Cloudflare (A Record) is: $dns_record_a_ip" - if [ $dns_record_a_ip != $ipv4 ] - then - # change the A record - curl -s -X PUT "https://api.cloudflare.com/client/v4/zones/$zone_id/dns_records/$(echo $dns_record_a_id | jq -r '{"result"}[] | .[0] | .id')" \ - -H "Content-Type: application/json" \ - -H "X-Auth-Email: $email" \ - -H "Authorization: Bearer $api_token" \ - --data "{"type":"A","name":"$dns_record","content":"$ipv4","ttl":1,"proxied":false}" \ - | jq -r '.errors' - else - echo "The current IPv4 and DNS record IPv4 are the same." - fi - else - echo "Could not get your IPv4. Check if you have it; e.g. on https://ifconfig.co" - fi - - # check if there is any IP version 6 - if [ $ipv6 ] - then - dns_record_aaaa_id=$(curl -s -X GET "https://api.cloudflare.com/client/v4/zones/$zone_id/dns_records?type=AAAA&name=$dns_record" \ - -H "Content-Type: application/json" \ - -H "X-Auth-Email: $email" \ - -H "Authorization: Bearer $api_token" - ) - # if the IPv6 exist - dns_record_aaaa_ip=$(echo $dns_record_aaaa_id | jq -r '{"result"}[] | .[0] | .content') - echo "The set IPv6 on Cloudflare (AAAA Record) is: $dns_record_aaaa_ip" - if [ $dns_record_aaaa_ip != $ipv6 ] - then - # change the AAAA record - curl -s -X PUT "https://api.cloudflare.com/client/v4/zones/$zone_id/dns_records/$(echo $dns_record_aaaa_id | jq -r '{"result"}[] | .[0] | .id')" \ - -H "Content-Type: application/json" \ - -H "X-Auth-Email: $email" \ - -H "Authorization: Bearer $api_token" \ - --data "{"type":"AAAA","name":"$dns_record","content":"$ipv6","ttl":1,"proxied":false}" \ - | jq -r '.errors' - else - echo "The current IPv6 and DNS record IPv6 are the same." - fi - else - echo "Could not get your IPv6. Check if you have it; e.g. on https://ifconfig.co" - fi - else - echo "There is a problem with getting the Zone ID. Check if the Zone Name is correct." - fi -else - echo "There is a problem with either the email or the password" -fi -#+end_src - -Once the script is saved and closed, make the scripts executable: - -#+begin_src sh -chmod +x ~/ddns/ddns.sh -chmod +x ~/ddns/update.sh -#+end_src - -You can test the script by running it manually: - -#+begin_src sh -./update.sh -#+end_src - -To make sure the scripts run automatically, add it to the =cron= file so that it -will run on a schedule. To do this, open the cron file: - -#+begin_src sh -crontab -e -#+end_src - -In the =cron= file, paste the following at the bottom of the editor: - -#+begin_src sh -,*/5 ** ** ** ** bash /home/<your_username>/ddns/update.sh -#+end_src -#+date: <2022-03-23 Wed 00:00:00> -#+title: Self-Hosting Guide: Nextcloud -#+description: Comprehensive guide for implementing Nextcloud as a self-hosted solution on an Ubuntu server, including installation steps, configuration parameters, and basic security measures. -#+slug: nextcloud-on-ubuntu - -* What is Nextcloud? -:PROPERTIES: -:CUSTOM_ID: what-is-nextcloud -:END: -[[https://nextcloud.com/][Nextcloud]] is a self-hosted solution for storage, communications, editing, -calendar, contacts, and more. - -This tutorial assumes that you have an Ubuntu server and a domain name -configured to point toward the server. - -* Install Dependencies -:PROPERTIES: -:CUSTOM_ID: install-dependencies -:END: -To start, you will need to install the packages that Nextcloud requires: - -#+begin_src sh -sudo apt install apache2 mariadb-server libapache2-mod-php7.4 -sudo apt install php7.4-gd php7.4-mysql php7.4-curl php7.4-mbstring php7.4-intl -sudo apt install php7.4-gmp php7.4-bcmath php-imagick php7.4-xml php7.4-zip -#+end_src - -* Set Up MySQL -:PROPERTIES: -:CUSTOM_ID: set-up-mysql -:END: -Next, you will need to log in to MySQL as the =root= user of the machine. - -#+begin_src sh -sudo mysql -uroot -p -#+end_src - -Once you've logged in, you must create a new user so that Nextcloud can manage -the database. You will also create a =nextcloud= database and assign privileges: - -#+begin_src sql -CREATE USER 'username'@'localhost' IDENTIFIED BY 'password'; -CREATE DATABASE IF NOT EXISTS nextcloud CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci; -GRANT ALL PRIVILEGES ON nextcloud.** TO 'username'@'localhost'; -FLUSH PRIVILEGES; -quit; -#+end_src - -* Download & Install Nextcloud -:PROPERTIES: -:CUSTOM_ID: download-install-nextcloud -:END: -To download Nextcloud, go the [[https://nextcloud.com/install/#instructions-server][Nextcloud downloads page]], click on =Archive File= -and right-click the big blue button to copy the link. - -Then, go to your server and enter the following commands to download, unzip, and -move the files to your destination directory. This example uses =example.com= as -the destination, but you can put it wherever you want to server your files from. - -#+begin_src sh -wget https://download.nextcloud.com/server/releases/nextcloud-23.0.3.zip -sudo apt install unzip -unzip nextcloud-23.0.3.zip -sudo cp -r nextcloud /var/www/example.com -#+end_src - -* Configure the Apache Web Server -:PROPERTIES: -:CUSTOM_ID: configure-the-apache-web-server -:END: -Now that the database is set up and Nextcloud is installed, you need to set up -the Apache configuration files to tell the server how to handle requests for -=example.com/nextcloud=. - -First, open the following file in the editor: - -#+begin_src sh -sudo nano /etc/apache2/sites-available/nextcloud.conf -#+end_src - -Once the editor is open, paste the following information in. Then, save and -close the file. - -#+begin_src config -<VirtualHost *:80> - DocumentRoot /var/www/example.com - ServerName example.com - ServerAlias www.example.com - ErrorLog ${APACHE_LOG_DIR}/error.log - CustomLog ${APACHE_LOG_DIR}/access.log combined - - <Directory /var/www/example.com/nextcloud/> - Require all granted - AllowOverride All - Options FollowSymLinks MultiViews - Satisfy Any - - <IfModule mod_dav.c> - Dav off - </IfModule> - </Directory> -</VirtualHost> -#+end_src - -Once the file is saved, enable it with Apache: - -#+begin_src sh -sudo a2ensite nextcloud.conf -#+end_src - -Next, enable the Apache modules required by Nextcloud: - -#+begin_src sh -sudo a2enmod rewrite headers env dir mime -#+end_src - -Finally, restart Apache. If any errors arise, you must solve those before -continuing. - -#+begin_src sh -sudo systemctl restart apache2 -#+end_src - -For the app to work, you must have the correct file permissions on your -=nextcloud= directory. Set the owner to be =www-data=: - -#+begin_src sh -sudo chown -R www-data:www-data /var/www/example.com/nextcloud/ -#+end_src - -* DNS -:PROPERTIES: -:CUSTOM_ID: dns -:END: -If you do not have a static internet protocol (IP) address, you will need to -update your DNS (Domain Name System) settings (at your DNS provider) whenever -your dynamic IP address changes. - -For an example on how I do that with Cloudflare, see my other post: [[https://cleberg.net/blog/cloudflare-dns-api.html][Dynamic DNS -Record Updates via Cloudflare API]]. - -* Certbot -:PROPERTIES: -:CUSTOM_ID: certbot -:END: -If you want to serve Nextcloud from HTTPS (Hypertext Transfer Protocol Secure) -rather than plain HTTP (Hypertext Transfer Protocol), use the following commands -to issue Let's Encrypt SSL (Secure Socket Layer) certificates: - -#+begin_src sh -sudo apt install snapd -sudo snap install core -sudo snap refresh core -sudo snap install --classic certbot -sudo ln -s /snap/bin/certbot /usr/bin/certbot -sudo certbot --apache -#+end_src - -* Results -:PROPERTIES: -:CUSTOM_ID: results -:END: -Voilà! You're all done and should be able to access Nextcloud from your domain -or IP address. -#+date: <2022-03-24 Thu 00:00:00> -#+title: Step-by-Step Guide to Securing Your Home Server with Firewalls, SSH, and VLANs -#+description: Detailed instructions to enhance the security posture of home servers exposed to public networks, including firewall setup, secure SSH configuration, fail2ban deployment, and network segmentation. -#+slug: server-hardening - -* Planning Data Flows & Security - -** My Personal Data Flow - -#+begin_src - ┌───────┐ ┌─────────────────┐ - ┌──► VLAN1 ├───► Private Devices │ - │ └───────┘ └─────────────────┘ -┌──────────┐ ┌────────┐ ┌──────────┐ ┌────────┐ │ -│ Internet ├───► Router ├───► Firewall ├───► Switch ├──┤ -└──────────┘ └────────┘ └──────────┘ └────────┘ │ - │ ┌───────┐ ┌───────────────┐ - └──► VLAN2 ├───► Public Server │ - └───────┘ └───────────────┘ -#+end_src - -** Thought Process - -To serve content from your home server and harden your security posture, you -have to think about the transport of data from =server= to =client=. - -Let's start with the actual server itself. Think about the following: - -- Do I have a firewall enabled? Do I need to update this to allow new ports or - internet protocol (IP) addresses? -- Do I have an intrusion prevention system (IPS) or intrusion detection system - (IDS) that may prevent outside traffic? -- Do I have any other security software installed? -- Are the services hosted inside Docker containers, behind a reverse proxy, or - virtualized? If so, are they configured to allow outside traffic? - -Once the data leaves the server, where does it go? In my case, it goes to a -managed switch. In this case, I asked the following: - -- What configurations is the switch using? -- Am I using VLANs (virtual local area networks)? - - Yes, I am using 802.1Q VLANs. -- Are the VLANs configured properly? - - Yes, as shown in the Switch section below, I have a separate VLAN to allow - outside traffic to and from the server alone. No other devices, except for a - service port, and in that VLAN. - -At this point, the data has been processed through the switch. Where does it go -next? In my case, it's pretty simple: it goes to the router/modem device. - -- Does my internet service provider (ISP) block any ports that I need? - - This is an important step that a lot of people run into when self-hosting at - home. Use an online port-checker tool for your IP or call your ISP if you - think ports are blocked. -- Is there a router firewall? - - Yes, I checked that it's configured to allow the ports I need to run my - services publicly. Common web servers and reverse proxies require ports 80 - and 443, but other services like media servers or games can require unique - ports, so be sure to check the documentation for your service(s). -- Are there any other settings affecting inbound/outbound traffic? - - Schedules or access blocks - - Static Routing - - QoS (Quality of Service) - - Port Forwarding - - DMZ (demilitarized zone) hosting - - Remote Management (this can sometimes mess with services that also require - the use of ports 80 and 443) - -Once the data leaves my router, it goes to the upstream ISP and can be accessed -publicly. - -*** Server - -The services I run on my server are installed straight into the operating system -(OS), without any use of Docker or virtual machines (VMs), so I don't need any -extra application configuration to make them accessible to the outside world. - -#+BEGIN_QUOTE -As of 2022-10-04, the paragraph above is no longer true as I now run a reverse -proxy with Nginx and host many services inside Docker. However, it doesn't -change anything regarding this post as I still just need to open ports 80 & 443 -and create the necessary website configuration files. -#+END_QUOTE - -When creating new services - either installed directly on bare metal or within -something like Docker - I ensure that I read through the documentation -thoroughly to understand a few key things: - -- What network activities should this app perform (if any)? Using which ports - and protocols? -- Does this app require any commands/services to be run as =root=? -- Does this app log errors, authentication failures/successes, or anything else - that would be useful for an investigation? - -For extra security, I use limit all incoming connections to SSH connections -through my server firewall [=ufw= (Uncomplicated Firewall)] and disable common -SSH (Secure Shell Protocol) settings. After all of that, I use =fail2ban= as a -preventative measure against brute-force login attempts. - -As another piece of security, you can randomize your SSH port to ensure that -random scanners or attackers can't easily try to force their way into your -network. For example, you can edit the port rules in your server to block all -connection requests to port =22= but forward all remote connections from port -=12345= to your server's port =22=. Then you just need to SSH to your network -via your randomized port. - -** =ufw= - -To see how to configure =ufw=, see my other post: [[https://cleberg.net/blog/ufw.html][Secure Your Network with the -Uncomplicated Firewall]]. - -The general notion with an on-device firewall is that you want to deny all -incoming connections by default and then selectively open certain ports for -services or users that you know need access. - -If you know that you will only be logging into this server from a certain set or -list of IPs, you can always set the firewall to only allow connections to port -22 from those IPs. - -For a quick start to only allow SSH connections to the server, use this: - -#+begin_src sh -sudo ufw default deny incoming -sudo ufw default allow outgoing -sudo ufw allow 22 -sudo ufw enable -#+end_src - -** =ssh= - -1. Using SSH Keys - - First, make sure you have an SSH keypair generated on the device(s) that - you'll be using to log in to the server. If you don't have an SSH key, run - this command: - - #+begin_src sh - ssh-keygen - #+end_src - - Now that we have an SSH key, copy it to the server with the following - command, which will ask for the user's password before accepting the key: - - #+begin_src sh - ssh-copy-id my_user@my_server - #+end_src - - If you have multiple keys, you'll need to specify which to use. After it's - complete, =ssh= back into the server as that user and make sure it doesn't - ask for a password. - -2. Disable Password & Root Authentication - - Now that we can access the server without a password, we will disable - password authentication and disable anyone from using =ssh= to login as - =root=. - - To do this, open the =sshd_config= file: - - #+begin_src sh - sudo nano /etc/ssh/sshd_config - #+end_src - - You'll need to update the parameters to the values below. If one of these - rules is commented-out or doesn't exist, create the rule at the bottom of the - file. - - #+begin_src config - PermitRootLogin no - PasswordAuthentication no - PubkeyAuthentication yes - #+end_src - - Finally, restart the =ssh= service: - - #+begin_src sh - sudo systemctl restart sshd.service - #+end_src - - To test that everything's working so far, open ANOTHER terminal and try - logging in as =root= over SSH. It is very important that you keep your - current SSH session open and test with an additional session, or you will - lock yourself out at some point and will need to use a recovery method (e.g., - hooking monitor up to home server) to get yourself back in. - -3. Enable Multi-Factor Authentication (MFA) for =ssh= - - This part is optional, but I highly recommend it. So far, we've ensured that - no one can log into our user on the server without using our secret key, and - we've ensured that no one can log in remotely as =root=. Next, you can enable - MFA authentication for =ssh= connections. - - This process involves editing a couple files and installing an MFA package, - so I will not include all the details in this post. To see how to configure - MFA for =ssh=, see my other post: [[https://cleberg.net/blog/ssh-mfa.html][Enabling MFA for SSH]]. - -** =fail2ban= - -I haven't written a post on how I use =fail2ban=, but it's quite simple. I use -the default =sshd= jail, but you can always create new jails for respective -applications or ports. For example, if you use Nginx as your web server, you can -use the =nginx-http-auth= jail. - -In order to get it up and running, use the following commands: - -#+begin_src sh -sudo apt install fail2ban -sudo fail2ban-client start sshd -sudo fail2ban-client status sshd -#+end_src - -This should be used as a last-resort defense and shouldn't be a replacement for -the security measures mentioned above. - -* Switch - -Between the router and any local devices is my managed switch, which is used to -create VLANs. The example below shows how I would isolate the VLANs if I were -starting to host a single service at home. - -** 802.1Q VLAN Configuration - -In this configuration, port 8 is the public server that needs to be accessed -from the outside. Port 23 is my 'dedicated service port' for this server. In -order to SSH to this server, I need to plug my laptop into port 23 or else I -cannot SSH. Otherwise, I'd need to hook up a monitor and keyboard directly to -the server to manage it. - -| VLAN ID | VLAN Name | Member Ports | Tagged Ports | Untagged Ports | -|---------+-----------+--------------+--------------+----------------| -| 1 | Default | 1-24 | 1-24 | | -| 2 | Server | 1,8,23 | 1,8,23 | | - -** 802.1Q VLAN PVID Setting - -Once the VLAN is created, I simply add the =VLAN ID= of =2= as the =PVID= for -any related ports (in this case, see that ports =8= and =23= have a PVID of -=2=). - -| Port | PVID | -|------+------| -| 1 | 1 | -| 2 | 1 | -| 3 | 1 | -| 4 | 1 | -| 5 | 1 | -| 6 | 1 | -| 7 | 1 | -| 8 | 2 | -| 9 | 1 | -| 10 | 1 | -| 11 | 1 | -| 12 | 1 | -| 13 | 1 | -| 14 | 1 | -| 15 | 1 | -| 16 | 1 | -| 17 | 1 | -| 18 | 1 | -| 19 | 1 | -| 20 | 1 | -| 21 | 1 | -| 22 | 1 | -| 23 | 2 | -| 24 | 1 | - -* Router - -On my router, the configuration was as easy as opening the firewall settings and -unblocking the ports I needed for my services (e.g., HTTP/S, Plex, SSH, MySQL, -etc.). - -Since I'm relying on an ISP-provided modem/router combo for now (not by choice), -I do not use any other advanced settings on my router that would inhibit any -valid traffic to these services. - -The paragraph above regarding the ISP-owned router is no longer accurate as I -now use the Ubiquiti Unifi Dream Machine Pro as my router. Within this router, I -enabled port forwarding/firewall rules, segregate the network based on the -device, and enable traffic restrictions (e.g., silently drop traffic from -certain countries and threat categories). - -If you have the option with your ISP, I recommend using a personal router with -software that you are familiar with so that you can explore all the options -available to you. - -* Physical Security - -One large piece of self-hosting that people generally don't discuss online is -physical security. However, physical security is very important for everyone who -hosts a server like this. Exactly /how/ important it is depends on the server -use/purpose. - -If you self-host customer applications that hold protected data, then physical -security is extremely important and cannot be ignored. If you simply host a blog -and some hobby sites, then it's a relatively minor consideration, but one you -still need to think about. - -** Location - -The first consideration is quite simple: location. - -- Is the server within a property you own or housed on someone else's property? -- Is it nearby (in your house, in your work office, in your neighbor's garage, - in a storage unit, etc.)? -- Do you have 24/7 access to the server? -- Are there climate considerations, such as humidity, fires, tornadoes, - monsoons? -- Do you have emergency equipment nearby in case of emergency? - -** Hardware Ownership - -Secondly, consider the hardware itself: - -- Do you own the server in its entirety? -- Are any other users able to access the server, even if your data/space is - segregated? -- If you're utilizing a third party, do they have any documentation to show - responsibility? This could be a Service Organization Controls (SOC) 1/2/3 - report, International Organization for Standardization (ISO) compliance - report, internal security/safety documentation. - -** Physical Controls - -Regardless of who owns the hardware, ensure that there are adequate safeguards -in place, if necessary. These usually don't apply to small home servers and are -usually covered already if you're utilizing a third party. - -These can include: - -- Server bezel locks -- Server room locks - physical, digital, or biometric authentication -- Security cameras -- Raised floors/lowered ceilings with proper guards/gates in-place within the - floors or ceilings -- Security personnel -- Log sheets and/or guest badges -#+date: <2022-03-26 Sat 00:00:00> -#+title: Secure Your SSH Access: Deploying Time-Based One-Time Password Authentication -#+description: Step-by-step deployment guide for enabling TOTP multi-factor authentication on SSH services using Google Authenticator and Pluggable Authentication Module (PAM) integration. -#+slug: ssh-mfa - -* Why Do I Need Multi-Factor Authentication (MFA) for SSH (Secure Shell Protocol)? - -If you are a sysadmin of a server anywhere (that includes at home!), you may -want an added layer of protection against intruders. This is not a replacement -for other security measures, such as: - -- Disable root SSH -- Disable SSH password authentication -- Allow only certain users to login via SSH -- Allow SSH only from certain internet protocol (IP) addressess - -However, MFA can be added as an additional security measure to ensure that your -server is protected. This is especially important if you need to allow password -authentication for SSH. - -For more guidance on server security measures, see my other post: [[https://cleberg.net/blog/server-hardening.html][Step-by-Step -Guide to Securing Your Home Server with Firewalls, SSH, and VLANs]]. - -* Install MFA PAM Module - -PAM (Pluggable Authentication Module) is an authentication infrastructure used -on Linux systems to authenticate a user. In order to use this technology, let's -install the =libpam-google-authenticator= package: - -#+begin_src sh -sudo apt-get update -#+end_src - -#+begin_src sh -sudo apt-get install libpam-google-authenticator -#+end_src - -* Initialize the PAM Module - -** Interactive Method - -Once the package is installed, initialize it and following the interactive -prompts to generate your OTP (One-Time Password) or TOTP (Time-based One-Time -Password): - -#+begin_src sh -google-authenticator -#+end_src - -If you are not sure how to answer, read the prompts carefully and think about -having to how each situation would affect your normal login attempts. If you are -still not sure, use my default responses below. - -#+begin_src txt -OUTPUT - -Do you want authentication tokens to be time-based (y/n) y -#+end_src - -At this point, use an authenticator app somewhere one of your devices to scan -the QR (quick-response) code. Any future login attempts after our upcoming -configuration changes will require that TOTP. - -#+begin_src txt -OUTPUT - -Do you want me to update your "/home/user/.google_authenticator" file? (y/n) y -#+end_src - -#+begin_src txt -OUTPUT - -Do you want to disallow multiple uses of the same authentication -token? This restricts you to one login about every 30s, but it increases -your chances to notice or even prevent man-in-the-middle attacks (y/n) y -#+end_src - -#+begin_src txt -OUTPUT - -By default, a new token is generated every 30 seconds by the mobile app. -In order to compensate for possible time-skew between the client and the server, -we allow an extra token before and after the current time. This allows for a -time skew of up to 30 seconds between authentication server and client. If you -experience problems with poor time synchronization, you can increase the window -from its default size of 3 permitted codes (one previous code, the current -code, the next code) to 17 permitted codes (the 8 previous codes, the current -code, and the 8 next codes). This will permit for a time skew of up to 4 minutes -between client and server. -Do you want to do so? (y/n) n -#+end_src - -#+begin_src txt -OUTPUT - -If the computer that you are logging into isn't hardened against brute-force -login attempts, you can enable rate-limiting for the authentication module. -By default, this limits attackers to no more than 3 login attempts every 30s. -Do you want to enable rate-limiting? (y/n) y -#+end_src - -** Non-Interactive Method - -If you need to do this quickly, know your responses to the prompts, or -are setting this up for numerous users, the non-interactive method can -be much faster: - -#+begin_src sh -google-authenticator -t -d -f -r 3 -R 30 -w 3 -#+end_src - -The options referenced above are as follows: - -#+begin_src txt -google-authenticator [<options>] - -h, --help Print this message - -c, --counter-based Set up counter-based (HOTP) verification - -t, --time-based Set up time-based (TOTP) verification - -d, --disallow-reuse Disallow reuse of previously used TOTP tokens - -D, --allow-reuse Allow reuse of previously used TOTP tokens - -f, --force Write file without first confirming with user - -l, --label=<label> Override the default label in "otpauth://" URL - -i, --issuer=<issuer> Override the default issuer in "otpauth://" URL - -q, --quiet Quiet mode - -Q, --qr-mode={NONE,ANSI,UTF8} QRCode output mode - -r, --rate-limit=N Limit logins to N per every M seconds - -R, --rate-time=M Limit logins to N per every M seconds - -u, --no-rate-limit Disable rate-limiting - -s, --secret=<file> Specify a non-standard file location - -S, --step-size=S Set interval between token refreshes - -w, --window-size=W Set window of concurrently valid codes - -W, --minimal-window Disable window of concurrently valid codes - -e, --emergency-codes=N Number of emergency codes to generate -#+end_src - -This fully configures the authenticator, saves it to a file, and then outputs -the secret key, QR code, and recovery codes. (If you add the flag =-q=, then -there won't be any output). If you use this command in an automated fashion, -make sure your script captures the secret key and/or recovery codes and makes -them available to the user. - -* PAM Configuration Settings - -Once you've enabled MFA and have it saved to an MFA app on your phone or other -device, open the PAM =sshd= file: - -#+begin_src sh -sudo nano /etc/pam.d/sshd -#+end_src - -You need to do two things in this file. First, add the following lines to the -bottom of the file: - -#+begin_src config -auth required pam_google_authenticator.so nullok -auth required pam_permit.so -#+end_src - -Second, comment-out the following line near the top of the file. - -If you leave this line uncommented, every SSH login attempt will ask for the -following three authentication factors: - -1. Publickey -2. Password -3. T/OTP code - -#+begin_src config -#@include common-auth -#+end_src - -* SSH Configuration Settings - -Finally, edit the =sshd_config= file again: - -#+begin_src sh -sudo nano /etc/ssh/sshd_config -#+end_src - -You'll need to change =ChallengeResponseAuthentication= to yes and add the -=AuthenticationMethods= line to the bottom of the file. - -#+begin_src config -ChallengeResponseAuthentication yes -AuthenticationMethods publickey,password publickey,keyboard-interactive -#+end_src - -Finally, restart the =ssh= service: - -#+begin_src sh -sudo systemctl restart sshd.service -#+end_src - -The next time you log in, you should be greeted with a verification code -request! -#+date: <2022-04-02 Sat 00:00:00> -#+title: How to Configure Nginx as a Reverse Proxy on Ubuntu Server -#+description: Technical guide for setting up Nginx server to operate as a reverse proxy on Ubuntu systems, including configuration files setup and operational parameters. -#+slug: nginx-reverse-proxy - -* What is a Reverse Proxy? - -A reverse proxy is a server that is placed between local servers or services and -clients/users (e.g., the internet). The reverse proxy intercepts all requests -from clients at the network edge and uses its configuration files to determine -where each request should be sent. - -** A Brief Example - -For example, let's say that I run three servers in my home: - -- Server01 (=example.com=) -- Server02 (=service01.example.com=) -- Server03 (=service02.example.com=) - -I also run a reverse proxy in my home that intercepts all public traffic: - -- Reverse Proxy - -Assume that I have a domain name (=example.com=) that allows clients to request -websites or services from my home servers. - -In this case, the reverse proxy will intercept all traffic from =example.com= -that enters my network and determine if the client is requesting valid data, -based on my configuration. - -If the user is requesting =example.com= and my configuration files say that -Server_{01} holds that data, Nginx will send the user to Server_{01}. If I were -to change the configuration so that =example.com= is routed to Server_{02}, that -same user would be sent to Server_{02} instead. - -#+begin_src txt -┌──────┐ ┌───────────┐ -│ User │─┐ ┌──► Server_01 │ -└──────┘ │ │ └───────────┘ - │ ┌──────────┐ ┌───────────────┐ │ ┌───────────┐ - ├────► Internet ├───► Reverse Proxy ├─────├──► Server_02 │ - │ └──────────┘ └───────────────┘ │ └───────────┘ -┌──────┐ │ │ ┌───────────┐ -│ User │─┘ └──► Server_03 │ -└──────┘ └───────────┘ -#+end_src - -* Reverse Proxy Options - -There are a lot of options when it comes to reverse proxy servers, so I'm just -going to list a few of the options I've heard recommended over the last few -years: - -- [[https://nginx.com][Nginx]] -- [[https://caddyserver.com][Caddy]] -- [[https://traefik.io/][Traefik]] -- [[https://www.haproxy.org/][HAProxy]] -- [[https://ubuntu.com/server/docs/proxy-servers-squid][Squid]] - -In this post, we will be using Nginx as our reverse proxy, running on Ubuntu -Server 20.04.4 LTS. - -* Nginx Reverse Proxy Example - -** Local Applications - -You may be like me and have a lot of applications running on your local network -that you'd like to expose publicly with a domain. - -In my case, I have services running in multiple Docker containers within a -single server and want a way to visit those services from anywhere with a URL. -For example, on my local network, [[https://dashy.to][Dashy]] runs through port 4000 -(=localhost:4000=) and [[https://github.com/louislam/uptime-kuma][Uptime Kuma]] runs through port 3001 (=localhost:3001=). - -In order to expose these services to the public, I will need to do the -following: - -1. Set up DNS (Domain Name System) records for a domain or subdomain (one per - service) to point toward the internet protocol (IP) address of the server. -2. Open up the server network's HTTP (Hypertext Transfer Protocol) and HTTPS - (Hypertext Transfer Protocol Secure) ports (80 & 443) so that the reverse - proxy can accept traffic and determine where to send it. -3. Install the reverse proxy software. -4. Configure the reverse proxy to recognize which service should get traffic - from any of the domains or subdomains. - -** Step 1: DNS Configuration - -To start, update your DNS configuration so that you have an =A= record for each -domain or subdomain. - -The =A= records should point toward the public IP address of the server. If you -don't know the public IP address, log in to the server and run the following -command: - -#+begin_src sh -curl ifconfig.co -#+end_src - -In the DNS example below, =xxx.xxx.xxx.xxx= is the public IP address of -the server. - -#+begin_src conf -example.com A xxx.xxx.xxx.xxx -uptime.example.com A xxx.xxx.xxx.xxx -dashy.example.com A xxx.xxx.xxx.xxx -www CNAME example.com -#+end_src - -Finally, ensure the DNS has propagated correctly with [[https://dnschecker.org][DNS Checker]] by entering -your domains or subdomains in the search box and ensuring the results are -showing the correct IP address. - -** Step 2: Open Network Ports - -This step will be different depending on which router you have in your home. If -you're not sure, try to visit [[http://192.168.1.1][192.168.1.1]] in your browser. Login credentials are -usually written on a sticker somewhere on your modem/router. - -Once you're able to log in to your router, find the Port Forwarding settings. -You will need to forward ports =80= and =443= to whichever machine is running -the reverse proxy. - -In my case, the table below shows the port-forwarding rules I've created. In -this table, =xxx.xxx.xxx.xxx= is the local device IP of the reverse proxy -server, it will probably be an IP between =192.168.1.1= and =192.168.1.255=. - -| NAME | FROM PORT | DEST PORT/IP | ENABLED | -|-------+-----------+-----------------+---------| -| HTTP | 80 | xxx.xxx.xxx.xxx | TRUE | -| HTTPS | 443 | xxx.xxx.xxx.xxx | TRUE | - -Once configured, these rules will direct all web traffic to your reverse proxy. - -** Step 3: Nginx Installation - -To install Nginx, simply run the following command: - -#+begin_src sh -sudo apt install nginx -#+end_src - -If you have a firewall enabled, open up ports =80= and =443= on your server so -that Nginx can accept web traffic from the router. - -For example, if you want to use =ufw= for web traffic and SSH, run the following -commands: - -#+begin_src sh -sudo ufw allow 'Nginx Full' -sudo ufw allow SSH -sudo ufw enable -#+end_src - -** Step 4: Nginx Configuration - -Now that we have domains pointing toward the server, the only step left is to -configure the reverse proxy to direct traffic from domains to local services. - -To start, you'll need to create a configuration file for each domain in -=/etc/nginx/sites-available/=. They will look identical except for the -=server_name= variable and the =proxy_pass= port. - -Dashy: - -#+begin_src sh -nano /etc/nginx/sites-available/dashy.example.com -#+end_src - -#+begin_src config -server { - listen 80; - server_name dashy.example.com; - - location / { - proxy_pass http://localhost:4000; - } -} -#+end_src - -Uptime: - -#+begin_src sh -nano /etc/nginx/sites-available/uptime.example.com -#+end_src - -#+begin_src config -server { - listen 80; - server_name uptime.example.com; - - location / { - proxy_pass http://localhost:3001; - } -} -#+end_src - -Once the configuration files are created, you will need to enable them with the -=symlink= command: - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/dashy.example.com /etc/nginx/sites-enabled/ -#+end_src - -Voilà! Your local services should now be available through their URLs (uniform -resource locators). - -* HTTPS with Certbot - -If you've followed along, you'll notice that your services are only available -via HTTP (not HTTPS). - -If you want to enable HTTPS for your new domains, you will need to generate TLS -(Transport Layer Security) certificates for them. The easiest way to generate -certificates on Nginx is [[https://certbot.eff.org][Certbot]]: - -#+begin_src sh -sudo apt install snapd; sudo snap install core; sudo snap refresh core -sudo snap install --classic certbot -sudo ln -s /snap/bin/certbot /usr/bin/certbot -sudo certbot --nginx -#+end_src -#+date: <2022-04-09 Sat 00:00:00> -#+title: PineTime Smartwatch: An Open-Source Hardware & Software Overview -#+description: Technical description of PineTime smartwatch capabilities, including heart rate measurement, step counting, sleep monitoring, and smartphone connectivity functions. -#+slug: pinetime - -* PineTime Product Information - -** Overview - -The [[https://www.pine64.org/pinetime/][PineTime]] is an open-source smartwatch, created by [[https://www.pine64.org][PINE64]]. Originally -announced in September 2019, this ARM-based watch is a fantastic option for -users who want the benefits of a modern smartwatch with the backing of -open-source components and software. - -** Product Specifications - -I won't dive into too many details that you can find on [[https://www.pine64.org/pinetime/][the product page]], but I -wanted to point out the prices for each watch and the primary functions: - -1. Price: - - - $26.99 (Sealed) - - $24.99 (Dev Kit) - - $51.98 (One Sealed + One Dev Kit) - -2. Primary Functionality: - - - Clock (+ Smartphone Sync) - - Pedometer - - Heart Rate Monitor - - Sleep Monitor - - Calories burned - - Messaging - - Smartphone Notifications - - Media Controls - -* Unboxing - -Now, my PineTime was ordered on 2022-02-17, shipped on 2022-02-22, and was -delivered on 2022-03-23. With the current delays on shipping times around the -world (and the semiconductor shortage), a month for delivery from China seems -reasonable to me. - -The packaging is simple, and the watch comes with instructions, technical -information, the watch, and a charger (it does not include a USB wall adapter). - -The watch itself was able to turn on immediately when I pulled it out of the -box, but the battery was depleted and required charging right away. - -* Software - -** Watch Operating System (OS): InfiniTime - -While turning on the watch for the first time, some of the main design choices -you can see in the watch OS, [[https://wiki.pine64.org/wiki/InfiniTime][InfiniTime]], are: - -- A square bezel, not too thin against the sides of the watch. -- A simple, rubber band. -- Basic font and screen pixel design. -- Swipe gestures to access other screens. - -The OS itself is fantastic in terms of functionality for me. It does exactly -what a smartwatch should do - track time, steps, heart rates, and connect to -another smart device, without being overly burdensome to the user. - -My only gripe so far is that it's /really/ difficult to swipe to different -screens, such as pulling down the notification tray. I'm not sure if this is an -OS or hardware issue, but it makes it quite hard to quickly move around the -screens. - -However, my absolute favorite design choice is that the button the side turns -the screen on and off and tilting/waving my wrist doesn't accidentally turn on -the screen. With other watches, I absolutely hated not being able to turn off -the raise-to-wake or wave features (i.e., blinding myself while wearing a watch -at night because I moved my arm). - -** iOS App: InfiniLink - -Since I am using iOS as my primary mobile device OS, I am using the [[https://github.com/xan-m/InfiniLink][InfiniLink]] -app to connect my watch. - -This app provides the following for PineTime owners: - -- Firmware updates -- Steps -- Charts -- Notifications - -Another big feature of InfiniLink is the ability to track pedometer steps in a -collection of beautiful graphs, with the option to change your step goal and add -in manual steps. - -Finally, there are charts to display the battery percentage and heart rates over -time. This area also comes with an option to clear data. - -* Final Thoughts - -** Pros - -After wearing my watch for a few weeks, I have mostly positive thoughts about -the watch so far. In the past, I have owned smartwatches by FitBit, Fossil, -Apple, etc. - *but I prefer the PineTime over all of those watches*. - -The PineTime strips out all the unnecessary features and performs the functions -that it provides effectively and efficiently. - -The battery life is amazing on this device. By default, the watch seems to last -anywhere from a few days to a week before dying. - -And of course, it's open source and backed by some of the most dedicated -enthusiasts and developers I've seen. Watching the Matrix channel, forums, and -website have been exciting to see. - -** Cons - -If I had to complain about anything, it would simply be the small bugs in some -features that can be contributed to the companion apps more than the watch -itself. - -A regular user would want native notification support out-of-the-box, which is -the biggest item not working for me at the moment. - -My only other complaint is that the battery indicator on the watch doesn't seem -accurate when it's nearing depletion - it seems that there's a bit of battery -life left and then my watch is dead very suddenly after. This could just be me -misinterpreting the battery level icons, but it has fooled me a few times into -thinking I had more battery left than I actually did. - -Other than those small items, I really do love this watch and am glad I replaced -my Apple Watch with the PineTime. -#+date: <2022-06-01 Wed 00:00:00> -#+title: Migrating from Cloudflare to Njalla: A Privacy-Focused DNS and Domain Management Transition -#+description: Evaluation and procedural explanation for migrating DNS management services from Cloudflare to Njalla, with emphasis on privacy controls and domain registration mechanics. -#+slug: ditching-cloudflare - -* Registrar - -After spending a year or so using Cloudflare for DNS (Domain Name System) only - -no proxying or applications - I spent the last few months using Cloudflare -Tunnels and Cloudflare Access to protect my self-hosted websites and -applications via their proxy traffic model. - -However, I have never liked using Cloudflare due to their increasingly large -share of control over web traffic, as well as their business model of being a -MITM (man-in-the-middle) for all of your traffic. - -So, as of today, I have switched over to [[https://njal.la][Njalla]] as my registrar and DNS manager. -I was able to easily transfer my domains over rapidly, with only one domain -taking more than 15-30 minutes to propagate. - -+I do still have two domains sitting at Cloudflare for the moment while I decide -if they're worth the higher rates (one domain is 30€ and the other is 45€).+ - -#+begin_quote -*Update (2022.06.03)*: I ended up transferring my final two domains over to -Njalla, clearing my Cloudflare account of personal data, and deleting the -Cloudflare account entirely. /I actually feel relieved to have moved on to a -provider I trust./ -#+end_quote - -* DNS - -As noted above, I'm using Njalla exclusively for DNS configurations on my -domains. - -However, the transfer process was not ideal. As soon as the domains transferred -over, I switched the nameservers from Cloudflare to Njalla and lost most of the -associated DNS records. So, the majority of the time spent during the migration -was simply re-typing all the DNS records back in one-by-one. - -This would be much simpler if I were able to edit the plain-text format of the -DNS configuration. I was able to do that at a past registrar (perhaps it was -[[https://gandi.net/][Gandi.net]]?) and it made life a lot easier. - -** Dynamic DNS Updates - -I have built an easy Python script to run (or set-up in =cron= to run -automatically) that will check my server's IPv4 (Internet Protocol version 4)and -IPv6 (Internet Protocol version 6), compare it to Njalla, and update the DNS -records if they don't match. You can see the full script and process in my other -post: [[https://cleberg.net/blog/njalla-dns-api.html][Automating Dynamic DNS Record Updates via Njalla API]]. - -I haven't used this other method, but I do know that you can create =Dynamic= -DNS records with Njalla that [[https://njal.la/docs/ddns/][work for updating dynamic subdomains]]. - -** Njalla's DNS Tool - -One neat upside to Njalla is that they have a [[https://check.njal.la/dns/][DNS lookup tool]] that provides a -lot of great information for those of you (AKA: me) who hate using the =dig= -command. - -This was very useful for monitoring a couple of my transferred domains to see -when the changes in nameservers, records, and DNSSEC (Domain Name System -Security Extensions) went into effect. - -* Tunnel - -Cloudflare Tunnel is a service that acts as a reverse-proxy (hosted on -Cloudflare's servers) and allowed me to mask the private internet protocol (IP) -address of the server hosting my various websites and apps. - -However, as I was moving away from Cloudflare, I was not able to find a suitable -replacement that was both inexpensive and simple. So, I simply went back to -hosting [[https://cleberg.net/blog/set-up-nginx-reverse-proxy/][my own reverse proxy with Nginx]]. With the recent additions of Unifi -hardware in my server/network rack, I am much more protected against spam and -malicious attacks at the network edge than I was before I switched to -Cloudflare. - -* Access - -Cloudflare Access, another app I used in combination with Cloudflare Tunnel, -provided an authentication screen that required you to enter valid credentials -before Cloudflare would forward you to the actual website or app (if the -website/app has their own authentication, you'd then have to authenticate a -second time). - -I did not replace this service with anything since I only host a handful of -non-sensitive apps that don't require duplicate authentication. -#+date: <2022-06-07 Tue 00:00:00> -#+title: Self-Hosting Guide: FreshRSS -#+description: Stepwise instructions for installing FreshRSS using Docker and configuring Nginx as a reverse proxy to enable secure and synchronized RSS feed access. -#+slug: self-hosting-freshrss - -* Why Use Really Simple Syndication (RSS)? - -After noticing that I have collected 50+ blogs as bookmarks, I decided to -migrate back to using RSS feeds to stay up-to-date with my favorite websites. -Using RSS allows me to read all of these posts in a single app (on both mobile & -desktop) and allows me to be notified when new posts are available. - -However, I ran into one issue: syncing subscriptions and read/unread posts -across devices. Since I want to be able to easily read on both mobile and -desktop, I decided to look for a self-hosted RSS solution. - -Thus, I found [[https://www.freshrss.org/][FreshRSS]] and was able to successfully install it on my server in -about 30 minutes. - -* Documentation - -While it's certainly not robust, the [[https://freshrss.github.io/FreshRSS/][FreshRSS documentation]] is helpful for -figuring out basic information about the service. - -However, I wanted to install this service as a Docker container and stumbled -across the [[https://github.com/FreshRSS/FreshRSS/tree/edge/Docker][Docker README]] within the GitHub repository. - -This README was the documentation I actually needed. However, as you'll see -below, I still had to manually edit one file (=config.php=) to access the API -externally via my RSS apps. - -* Installation - -** DNS - -The first step, as required by any external web service, was assigning a domain -name to use. I chose to use a subdomain, like =rss.example.com=. - -To assign this, I created an =A= record in my DNS settings with the IPv4 -(Internet Protocol version 4) address of the server and an =AAAA= record with -the IPv6 (Internet Protocol version 6) address of the server. Note: assigning an -IPv6 (=AAAA=) record is optional, but I like to enable IPV6 for my services. - -#+begin_src config -rss.example.com A xxx.xxx.xxx.xxx -rss.example.com AAAA xxxx:xxxx: ... :xxxx -#+end_src - -** Docker - -I initially tried to set up a =docker-compose.yml= file with a =.env= file -because I prefer to have a file I can look back at later to see how I initially -started the container, but it simply wouldn't work for me. I'm not sure why, but -I assume I wasn't telling =docker-compose= where the =.env= file was. - -Regardless, I chose to simply run the service with =docker run=. See the -following command for my =docker run= configuration: - -#+begin_src sh -sudo docker run -d --restart unless-stopped --log-opt max-size=10m \ - -p 8080:80 \ - -e TZ=America/Chicago \ - -e 'CRON_MIN=1,31' \ - -v freshrss_data:/var/www/FreshRSS/data \ - -v freshrss_extensions:/var/www/FreshRSS/extensions \ - --name freshrss \ - freshrss/freshrss -#+end_src - -This started the container successfully and allowed me to visit the FreshRSS -instance at =localhost:8080=. - -** Fresh RSS Set-Up - -I *HIGHLY* suggest that you set up your user account prior to exposing this -service to the public. It's unlikely that someone is trying to access the exact -domain or IP/port you're assigning here, but as soon as you expose this service, -the first person to open the URL will be able to create the administrative user. - -In order to set up your FreshRSS service, open the =localhost:8080= URL in your -browser (you may need to use a local internet protocol (IP) instead of -=localhost= if you're accessing the page from a different machine on the -network - e.g., =192.168.1.20:8080=). - -Once the page loads, set up your default user with a strong username and -password. You may also choose to configure other settings prior to exposing this -service. - -** Nginx Reverse-Proxy - -In order to access this service outside my home, I needed to set up a -reverse-proxy to connect =localhost:8080= to =rss.example.com=. - -First, I created a new Nginx configuration file: - -#+begin_src sh -sudo nano /etc/nginx/sites-available/rss.example.com -#+end_src - -Within the configuration file, I pasted the following code: - -#+begin_src config -upstream freshrss { - server 127.0.0.1:8080; - keepalive 64; -} - -server { - server_name rss.example.com; - listen 80; - - location / { - # The final `/` is important. - proxy_pass http://localhost:8080/; - add_header X-Frame-Options SAMEORIGIN; - add_header X-XSS-Protection "1; mode=block"; - proxy_redirect off; - proxy_buffering off; - proxy_set_header Host $host; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Port $server_port; - proxy_read_timeout 90; - - # Forward the Authorization header for the Google Reader API. - proxy_set_header Authorization $http_authorization; - proxy_pass_header Authorization; - } -} -#+end_src - -Finally, restart Nginx and you will be able to access your service via HTTP (Hypertext Transfer Protocol): - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src - -** HTTPS - -However, I don't want to access my RSS feeds via HTTP. I want it available only -via HTTPS (Hypertext Transfer Protocol Secure). In order to do this, I ran the -[[https://certbot.eff.org/][certbot]] program to generate SSL (Secure Socket Layer) certificates for me: - -#+begin_src sh -sudo certbot --nginx -#+end_src - -This process will automatically generate an SSL certificate for you and modify -the Nginx configuration file to include a redirect from HTTP to HTTPS. - -* Post-Installation Fixes - -At this point, we have a functional FreshRSS website, available from anywhere -and secured with HTTPS. However, attempting to connect this service to an RSS -app resulted in many errors regarding unavailable URLs and incorrect -credentials. - -** API Set-Up - -First, you need to open your user profile in FreshRSS (=Settings= > =Profile=) -and set an API password in the field at the bottom. This is the password you -will need to provide to your RSS apps. - -Once that is set and saved, click the link below the API password field to open -the API (application programming interface) check tool. It should look something -like =https://localhost:8080/api/= or =https://rss.example.com/api/=. - -Within this page, you /should/ see your correct external URL and "PASS" at the -bottom of each API type. This would mean everything is set up correctly, and you -can now move on and login to any RSS apps that support self-hosted options. - -In my case, the URL showed an internal URL and I had a warning that the -=base_url= variable may be misconfigured. If this is the case, see the next -section for a fix. - -** Base URL Fix - -In order to fix the =base_url= for the API, I opened up my docker container with -the following command: - -#+begin_src sh -sudo docker exec -it freshrss bash -#+end_src - -Within this container, update the packages and install an editor: - -#+begin_src sh -apt-get update -apt-get install nano -#+end_src - -Finally, open up =config.php= in the =data= directory: - -#+begin_src sh -nano data/config.php -#+end_src - -Within =config.php=, you will need to update the =base_url= variable and update -it to match your external URL (uniform resource locator). In my case, I simply -commented-out the incorrect URL with =//= and added the correct one on a new -line: - -#+begin_src php -<?php - return array ( - ... - // 'base_url' => 'http://localhost:8080', - 'base_url' => 'https://rss.example.com', - ... - ) -> -#+end_src - -You can now exit the file with =Ctrl + x=, press =y= to save the file, and then -click =Enter= to keep the same file name. - -Finally, just exit out of the docker container: - -#+begin_src sh -exit -#+end_src - -Next, just restart the container: - -#+begin_src sh -sudo docker restart freshrss -#+end_src - -Voilà! Your API check should now "PASS" and you should be able to use one of the -API URLs in your RSS apps. - -In my case, I use [[https://netnewswire.com][NetNewsWire]] on my desktop and phone. -#+date: <2022-06-16 Thu 00:00:00> -#+title: Living the Terminal Lifestyle: Efficient Workflows for Focused Computing -#+description: Detailed procedures for reducing digital interruptions and increasing efficiency through terminal-based utilities for web browsing, communication, electronic mail, RSS feeds, and programming tasks. -#+slug: terminal-lifestyle - -* Text-Based Simplicity - -I've detailed my views on web-based minimalism and related topics in other posts -throughout the years; e.g., JavaScript/CSS (Cascading Style Sheets) bloat -slowing down websites that are essentially a text document. However, I have -never really expanded beyond talking about the web and describing how I focus on -minimizing distractions in other digital environments. - -This post is going to set the baseline for how I /try/ to live my digital life. -It does not necessarily get into my physical life, which is often harder to -control and contain all the noise in our modern world. - -While there are new things to do every day in our digital world, I find that -keeping a core set of values and interests can ground you and keep you mindful -of /why/ you are participating in the digital world. For example, if - at your -core - you have no interest in what strangers think about random topics, it -would be unwise to start participating in social media. However, I am someone -who has been dragged in by effective advertising to participate in communities -that I realize I do not care for. - -I won't dive much further into explaining the philosophy of all this, but I will -link a few helpful articles that may pique your interest if you're in search of -more meaningful experiences: - -- [[https://en.wikipedia.org/wiki/Mindfulness][Mindfulness]] -- [[https://en.wikipedia.org/wiki/Minimalism][Minimalism]] -- [[https://en.wikipedia.org/wiki/Stoicism][Stoicism]] - -* Living Life in the Terminal - -My personal approach to reducing digital distractions and increasing my focus on -the task at hand is to use a terminal for as much as I possibly can. - -Most days, this means that I have a few tabs open constantly in my terminal: - -1. A web browser -2. A chat client -3. An email client -4. An RSS (Really Simple Syndication) feed reader -5. A local shell for navigating my computer's files -6. A remote shell for managing servers and other machines - -Beyond this, I rarely open other tabs or graphical applications, unless -absolutely necessary. If you look, you may be surprised what can be accomplished -in the terminal. - -For example, I have moved my music and entertainment downloads to the terminal, -along with my device virtual private network (VPN) connections. I am exploring -options for moving my RSS subscriptions to something like [[https://newsboat.org/][Newsboat]], so that I -can read my daily articles without all the fuss. - -Now that we have some examples out of the way, let's dive into the specifics. - -** Browsing the Web - -I'm going to start off with a hard topic for those who prefer to live in the -terminal: web browsing. This task is made hard mostly by websites and web apps -that require JavaScript to run. The other difficult part is that if you're using -a text-based browser, that means images won't load (hopefully that's obvious). - -I am using [[https://lynx.invisible-island.net][Lynx]], a text-based browser that runs quickly and easily in the -terminal. Lynx allows me to browser most websites by simply typing =g= and then -typing in the URL I want. - -If you need a search engine while in Lynx, I recommend [[https://lite.duckduckgo.com/lite/][DuckDuckGo (Lite)]], which -allows you to search the web using their text-only interface. - -Eventually, you will run into websites that don't work (or are just too ugly and -messy) in a text-only mode, and you'll be forced to switch over to a GUI browser -to look at that site. Personally, I don't mind this as it doesn't happen as -often as I thought it would. - -The only time I need to do this is when I want to browse an image/video-focused -webpage or if I need to log in to a site, and it doesn't support a text-only -login page. For example, I am able to easily log in to [[https://sr.ht][Sourcehut]] in lynx. - -** Chatting with Friends - -After web browsing activities, my main form of terminal communication is Matrix. -I use the [[https://docs.mau.fi/gomuks/][gomuks]] client currently. - -This was incredibly easy to install on macOS (but I will need to see if it'll be -just as easy on Linux when my new laptop arrives): - -#+begin_src sh -brew install gomuks -#+end_src - -Once you launch gomuks, it will sync and require your username and password to -login. After doing so, the only problem I ran into was verifying my gomuks -client so that I could participate in rooms with E2EE (end-to-end encryption). - -Finally, I was able to verify the session by opening the Element desktop app (I -assume you can do this in the browser and mobile app too, but I'm not sure) and -manually verifying myself with this process: - -1. Open the Element desktop app -2. Open a room I was a member of -3. Open the =Room Info= pane -4. Open the =People= menu and search for myself -5. Click on my profile name -6. Click on the session link under the =Security= section and follow the prompts - to manually verify the session - -Overall, I like gomuks and am able to enjoy all the features I was using in -Element. The only hiccup I have occurred is manually downloading images to view -them, which can be annoying. - -** Email - -Moving email to the terminal has been the hardest of the tasks for me. Unlike -web browsing, where I can simply decide to not look at a website that does not -work in the terminal, I cannot simply ignore emails sent to me. - -Personally, I am experimenting with [[https://neomutt.org/][neomutt]] as a potential email client. - -However, this requires a *TON* of configuration and tweaking to get right. Even -when I was able to set up neomutt, configure my email account, and customize a -few personal preferences, a lot of emails still do not display correctly (mostly -due to HTML (Hypertext Markup Language) and images). - -I won't get into the details of configuring =neomutt=; I mostly followed this -blog post: [[https://gideonwolfe.com/posts/workflow/neomutt/intro/][Email in the Terminal: Configuring Neomutt]]. - -Finally, I have yet to figure out how to connect my PGP (Pretty Good Privacy) -keys to =neomutt=, but that's a problem for another day. - -** RSS Feed Reader - -I have just started using [[https://newsboat.org/][Newsboat]] to read articles in my terminal and have -found quick success with it. - -The configuration was super easy for this app; I simply installed the app, -created a file for URLs, and imported my OPML (Outline Processor Markup -Language) subscriptions that I had exported out of my old feed reader: - -#+begin_src sh -brew install newsboat -#+end_src - -#+begin_src sh -touch ~/.newsboat/urls -#+end_src - -#+begin_src sh -newsboat -i=my_subscriptions.opml -#+end_src - -** Writing & Programming - -Unfortunately, the weak link in my terminal-based environment right now is my -grasp of the possibilities of editing files within a shell. - -I am used to the easy extensions found in VSCodium and Kate, so I am slowly -learning how to mold the default editing tools to my needs. Currently, this -means I am using =nano= with the following configuration: - -#+begin_src config -set breaklonglines -set autoindent -set linenumbers -set tabstospaces -set tabsize 2 -set fill 80 -#+end_src - -This configuration allows nano to automatically hard-wrap lines at 80 -characters, autoindent the wrapped lines (if the previous line was indented), -use 2 spaces per tab, and display line numbers within each file I open. - -I am currently looking to see if =vim= or =emacs= would be more useful for my -current needs, but I'm not in any rush, so I don't expect to find an answer -anytime soon. - -With my current life demands, I am not programming at the moment and have not -explored the best terminal set-up for programming. However, I have seen many -peers find success configuring =vim= and =emacs=, so that's where I will start -when I pick my projects back up. -#+date: <2022-06-22 Wed 00:00:00> -#+title: How to Receive a Daily Dose of Poetry via Automated Email -#+description: Instructional guide for scheduling and automating the distribution of classic and contemporary poetry in plaintext format to an electronic mail inbox using Python scripting and SMTP protocol. -#+slug: daily-poetry - -* Source Code - -I don't want to bury the lede here, so if you'd like to see the full source code -I use to email myself plaintext poems daily, visit the repository: -[[https://github.com/ccleberg/daily-poem.git][daily-poem.git]]. - -* My Daily Dose of Poetry - -Most of my programming projects are small, random projects that are made -strictly to fix some small problem I have or enhance my quality of life. - -In this case, I was looking for a simply and easy way to get a daily dose of -literature or poetry to read in the mornings. - -However, I don't want to sign up for a random mailing list on just any -website. I also don't want to have to work to find the reading content -each morning, as I know I would simply give up and stop reading daily. - -Thus, I found a way to deliver poetry to myself in plain-text format, on -a daily basis, and scheduled to deliver automatically. - -* Prerequisites - -This solution uses Python and email, so the following process requires -the following to be installed: - -1. A Simple Mail Transfer Protocol (SMTP) server, which can be as easy as - installing =mailutils= if you're on a Debian-based distribution. -2. Python (& pip!) -3. The following Python packages: =email=, =smtplib=, =json=, and =requests= - -* Breaking Down the Logic - -I want to break down the logic for this program, as it's quite simple and -informational. - -** Required Packages - -This program starts with a simple import of the required packages, so I wanted -to explain why each package is used: - -#+begin_src python -from email.mime.text import MIMEText # Required for translating MIMEText -import smtplib # Required to process the SMTP mail delivery -import json # Required to parse the poetry API results -import requests # Required to send out a request to the API -#+end_src - -** Sending the API Request - -Next, we need to actually send the application programming interface (API) -request. In my case, I'm calling a random poem from the entire API. If you want, -you can call specific poems or authors from this API. - -#+begin_src python -json_data = requests.get('https://poetrydb.org/random').json() -#+end_src - -This gives us the following result in JSON (JavaScript Object Notation): - -#+begin_src json -[ - { - "title": "Sonnet XXII: With Fools and Children", - "author": "Michael Drayton", - "lines": [ - "To Folly", - "", - "With fools and children, good discretion bears;", - "Then, honest people, bear with Love and me,", - "Nor older yet, nor wiser made by years,", - "Amongst the rest of fools and children be;", - "Love, still a baby, plays with gauds and toys,", - "And, like a wanton, sports with every feather,", - "And idiots still are running after boys,", - "Then fools and children fitt'st to go together.", - "He still as young as when he first was born,", - "No wiser I than when as young as he;", - "You that behold us, laugh us not to scorn;", - "Give Nature thanks you are not such as we.", - "Yet fools and children sometimes tell in play", - "Some, wise in show, more fools indeed than they." - ], - "linecount": "15" - } -] -#+end_src - -** Parsing the API Results - -In order to parse this into a readable format, we need to use the =json= package -and extract the fields we want. In the example below, I am grabbing every field -presented by the API. - -For the actual poem content, we need to loop over each line in the =lines= -variable since each line is a separate string by default. - -#+begin_quote -You /could/ also extract the title or author and make another call out -to the API to avoid having to build the plaintext poem with a loop, but -it just doesn't make sense to me to send multiple requests when we can -create a simple loop on our local machine to work with the data we -already have. - -For -[[https://poetrydb.org/title/Sonnet%20XXII:%20With%20Fools%20and%20Children/lines.text][example]], -look at the raw data response of this link to see the poem's lines -returned in plaintext. -#+end_quote - -#+begin_src python -title = json_data[0]['title'] -author = json_data[0]['author'] -line_count = json_data[0]['linecount'] -lines = '' -for line in json_data[0]['lines']: - lines = lines + line + "\n" -#+end_src - -** Composing the Email - -Now that I have all the data I need, I just need to compose it into a message -and prepare the message metadata. - -For my daily email, I want to see the title of the poem first, followed by the -author, then a blank line, and finally the full poem. This code snippet combines -that data and packages it into a MIMEText container, ready to be emailed. - -#+begin_src python -msg_body = title + "\n" + author + "\n\n" + lines -msg = MIMEText(msg_body) -#+end_src - -Before we send the email, we need to prepare the metadata (subject, from, to, -etc.): - -#+begin_src python -sender_email = '[email protected]' -recipient_emails = ['[email protected]'] -msg['Subject'] = 'Your Daily Poem (' + line_count + ' lines)' -msg['From'] = sender_email -msg['To'] = recipient_email -#+end_src - -** Sending the Email - -Now that I have everything ready to be emailed, the last step is to simply -connect to an SMTP server and send the email out to the recipients. In my case, -I installed =mailutils= on Ubuntu and let my SMTP server be =localhost=. - -#+begin_src python -smtp_server = 'localhost' -s = smtplib.SMTP(smtp_server) -s.sendmail(sender_email, recipient_emails, msg.as_string()) -s.quit() -#+end_src - -* The Result! - -Instead of including a screenshot, I've copied the contents of the email that -was delivered to my inbox below since I set this process up in plaintext format. - -#+begin_src txt -Date: Wed, 22 Jun 2022 14:37:19 +0000 (UTC) -From: REDACTED -To: REDACTED -Subject: Your Daily Poem (36 lines) -MIME-Version: 1.0 -Content-Transfer-Encoding: 8bit -Content-Type: text/plain; charset=utf-8 - -Sonnet XXII: With Fools and Children -Michael Drayton - -With fools and children, good discretion bears; -Then, honest people, bear with Love and me, -Nor older yet, nor wiser made by years, -Amongst the rest of fools and children be; -Love, still a baby, plays with gauds and toys, -And, like a wanton, sports with every feather, -And idiots still are running after boys, -Then fools and children fitt'st to go together. -He still as young as when he first was born, -No wiser I than when as young as he; -You that behold us, laugh us not to scorn; -Give Nature thanks you are not such as we. -Yet fools and children sometimes tell in play -Some, wise in show, more fools indeed than they. -#+end_src - -* Scheduling the Daily Email - -Last, but not least, is scheduling this Python script with =crontab=. To -schedule a script to run daily, you can add it to the =crontab= file. To do -this, open =crontab= in editing mode: - -#+begin_src sh -crontab -e -#+end_src - -In the file, simply paste the following snippet at the bottom of the file and -ensure that the file path is correctly pointing to wherever you saved your -Python script: - -#+begin_src config -0 8 ** ** ** python3 /home/<your_user>/dailypoem/main.py -#+end_src - -We have now set up the script and scheduled it to run daily at 08:00! -#+date: <2022-06-24 Fri 00:00:00> -#+title: My Journey Back to Linux: Setting Up Fedora with i3 Window Manager -#+description: Examination of the transition from macOS to Linux, including a detailed description of Fedora operating system installation and i3 window manager configuration. -#+slug: fedora-i3 - -* Leaving macOS - -As I noted in a recent post, I have been planning on migrating from macOS back -to a Linux-based operating system (OS). I am happy to say that I have finally -completed my migration and am now stuck in the wonderful world of Linux again. - -My decision to leave macOS really came down to just a few important -things: - -- Apple Security (Gatekeeper) restricting me from running any software I want. - Even if you disable Gatekeeper and allow software to bypass the rest of the - device installation security, you still have to repeat that process every time - the allowed software is updated. -- macOS sends out nearly constant connections, pings, telemetry, etc. to a - myriad of mysterious Apple services. I'm not even going to dive into how many - macOS apps have constant telemetry on, as well. -- Lastly, I just /really/ missed the customization and freedom that comes with - Linux. Being able to switch to entirely new kernel, OS, or desktop within - minutes is a freedom I took for granted when I switched to macOS. - -Now that I've covered macOS, I'm going to move on to more exciting topics: my -personal choice of OS, desktop environment (DE), and various customizations I'm -using. - -* Fedora - -After trying a ton of distributions (I think I booted and tested around 20-25 -distributions), I finally landed on [[https://getfedora.org/][Fedora Linux]]. I have quite a bit of experience -with Fedora and enjoy the =dnf= package manager. Fedora allows me to keep -up-to-date with recent software (I'm looking at you, Debian), but still provides -a level of stability you don't find in every distribution. - -In a very close second place was Arch Linux, as well as its spin-off: Garuda -Linux (Garuda w/ sway is /beautiful/). Arch is great for compatibility and the -massive community it has, but I have just never had the time to properly sit -down and learn the methodology behind their packaging systems. - -Basically, everything else I tested was unacceptable in at least one way or -another. Void (=glibc=) was great, but doesn't support all the software I need. -Slackware worked well as a text-based user interface (TUI), but I wasn't skilled -enough to get a tiling window manager (WM) working on it. - -** i3 - -One of the reasons I settled on Fedora is that it comes with an official i3 -spin. Being able to use a tiling WM, such as i3 or sway, is one of the biggest -things I wanted to do as soon as I adopted Linux again. - -I will probably set up a dotfile repository soon, so that I don't lose any of my -configurations, but nothing big has been configured thus far. - -The two main things I have updated in i3wm are natural scrolling and binding my -brightness keys to the =brightnessctl= program. - -1. Natural Scrolling - - You can enable natural scrolling by opening the following file: - - #+begin_src sh - sudo nano /usr/share/X11/xorg.conf.d/40-libinput.conf - #+end_src - - Within the =40-libinput.conf= file, find the following input sections and - enable the natural scrolling option. - - This is the =pointer= section: - - #+begin_src conf - Section "InputClass" - Identifier "libinput pointer catchall" - MatchIsPointer "on" - MatchDevicePath "/dev/input/event*" - Driver "libinput" - Option "NaturalScrolling" "True" - EndSection - #+end_src - - This is the =touchpad= section: - - #+begin_src conf - Section "InputClass" - Identifier "libinput touchpad catchall" - MatchIsTouchpad "on" - MatchDevicePath "/dev/input/event*" - Driver "libinput" - Option "NaturalScrolling" "True" - EndSection - #+end_src - -2. Enabling Brightness Keys - - Likewise, enabling brightness key functionality is as simple as binding the - keys to the =brightnessctl= program. - - To do this, open up your i3 configuration file. Mine is located here: - - #+begin_src sh - nano /home/<my-user>/.config/i3/config - #+end_src - - #+begin_src conf - # Use brightnessctl to adjust brightness. - bindsym XF86MonBrightnessDown exec --no-startup-id brightnessctl --min-val=2 -q set 3%- - bindsym XF86MonBrightnessUp exec --no-startup-id brightnessctl -q set 3%+ - #+end_src - -3. =polybar= - - Instead of using the default =i3status= bar, I have opted to use =polybar= - instead (as you can also see in the screenshot above). - - My configuration for this menu bar is basically just the default settings - with modified colors and an added battery block to quickly show me the - machine's battery info. - -4. =alacritty= - - Not much to say on this part yet, as I haven't configured it much, but I - installed =alacritty= as my default terminal, and I am using =zsh= and the - shell. - -* Software Choices - -Again, I'm not going to say much that I haven't said yet in other blog posts, so -I'll just do a quick rundown of the apps I installed immediately after I set up -the environment. - -Flatpak Apps: - -- Cryptomator -- pCloud -- Signal - -Fedora Packages: - -- gomuks -- neomutt -- neofetch -- Firefox - - uBlock Origin - - Bitwarden - - Stylus - - Privacy Redirect - -Other: - -- exiftool -#+date: <2022-07-01 Fri 00:00:00> -#+title: Self-Hosting Guide: Git & cGit -#+description: Comprehensive instructions for secure and efficient setup, hosting, and management of personal Git repositories to facilitate collaborative development and remote access. -#+slug: git-server - -* My Approach to Self-Hosting Git - -I have often tried to self-host my Git repositories, but have always fallen -short when I tried to find a suitable web interface to show on the front-end. - -After a few years, I have finally found a combination of methods that allow me -to easily self-host my projects, view them on the web, and access them from -anywhere. - -Before I dive into the details, I want to state a high-level summary of my -self-hosted Git approach: - -- This method uses the =ssh://= (read & write) and =git://= (read-only) - protocols for push and pull access. - - For the =git://= protocol, I create a =git-daemon-export-ok= file in any - repository that I want to be cloneable by anyone. - - The web interface I am using (=cgit=) allows simple HTTP cloning by default. - I do not disable this setting as I want beginners to be able to clone one of - my repositories even if they don't know the proper method. -- I am not enabling Smart HTTPS (Hypertext Transfer Protocol Secure) for any - repositories. Updates to repositories must be pushed via SSH (Secure Shell - Protocol). -- Beyond the actual repository management, I am using =cgit= for the front-end - web interface. - - If you use the =scan-path=<path>= configuration in the =cgitrc= - configuration file to automatically find repositories, you can't exclude a - repository from =cgit= if it's stored within the path that =cgit= reads. To - host private repositories, you'd need to set up another directory that - =cgit= can't read. - -* Assumptions - -For the purposes of this walkthrough, I am assuming you have a URL -(=git.example.com=) or internet protocol (IP) address (=207.84.26.991=) -addressed to the server that you will be using to host your git repositories. - -* Adding a Git User - -In order to use the SSH method associated with Git, we will need to add a user -named =git=. If you have used the SSH method for other git hosting sites, you -are probably used to the following syntax: - -#+begin_src sh -git clone [user@]server:project.git -#+end_src - -The syntax above is an =scp=-like syntax for using SSH on the =git= user on the -server to access your repository. - -Let's delete any remnants of an old =git= user, if any, and create the new user -account: - -#+begin_src sh -sudo deluser --remove-home git -sudo adduser git -#+end_src - -** Import Your SSH Keys to the Git User - -Once the =git= user is created, you will need to copy your public SSH key on -your local development machine to the =git= user on the server. - -If you don't have an SSH key yet, create one with this command: - -#+begin_src sh -ssh-keygen -#+end_src - -Once you create the key pair, the public should be saved to =~/.ssh/id_rsa.pub=. - -If your server still has password-based authentication available, you can copy -it over to your user's home directory like this: - -#+begin_src sh -ssh-copy-id git@server -#+end_src - -Otherwise, copy it over to any user that you can access. - -#+begin_src sh -scp ~/.ssh/id_rsa.pub your_user@your_server: -#+end_src - -Once on the server, you will need to copy the contents into the =git= user's -=authorized_keys= file: - -#+begin_src sh -cat id_rsa.pub > /home/git/.ssh/authorized_keys -#+end_src - -** (Optional) Disable Password-Based SSH - -If you want to lock down your server and ensure that no one can authenticate in -via SSH with a password, you will need to edit your SSH configuration. - -#+begin_src sh -sudo nano /etc/ssh/sshd_config -#+end_src - -Within this file, find the following settings and set them to the values I am -showing below: - -#+begin_src conf -PermitRootLogin no -PasswordAuthentication no -AuthenticationMethods publickey -#+end_src - -You may have other Authentication Methods required in your personal set-up, so -the key here is just to ensure that =AuthenticationMethods= does not allow -passwords. - -*** Setting up the Base Directory - -Now that we have set up a =git= user to handle all transport methods, we need to -set up the directory that we will be using as our base of all repositories. - -In my case, I am using =/git= as my source folder. To create this folder and -assign it to the user we created, execute the following commands: - -#+begin_src sh -sudo mkdir /git -sudo chown -R git:git /git -#+end_src - -*** Creating a Test Repository - -On your server, switch over to the =git= user in order to start managing git -files. - -#+begin_src sh -su git -#+end_src - -Once logged-in as the =git= user, go to your base directory and create a test -repository. - -#+begin_src sh -cd /git -mkdir test.git && cd test.git -git init --bare -#+end_src - -If you want to make this repo viewable/cloneable to the public via the =git://= -protocol, you need to create a =git-daemon-export-ok= file inside the -repository. - -#+begin_src sh -touch git-daemon-export-ok -#+end_src - -* Change the Login Shell for =git= - -To make sure that the =git= user is only used for git operations and nothing -else, you need to change the user's login shell. To do this, simply use the -=chsh= command: - -#+begin_src sh -sudo chsh git -#+end_src - -The interactive prompt will ask which shell you want the =git= user to use. You -must use the following value: - -#+begin_src sh -/usr/bin/git-shell -#+end_src - -Once done, no one will be able to SSH to the =git= user or execute commands -other than the standard git commands. - -* Opening the Firewall - -Don't forget to open up ports on the device firewall and network firewall if you -want to access these repositories publicly. If you're using default ports, -forward ports =22= (ssh) and =9418= (git) from your router to your server's IP -address. - -If your server also has a firewall, ensure that the firewall allows the same -ports that are forwarded from the router. For example, if you use =ufw=: - -#+begin_src sh -sudo ufw allow 22 -sudo ufw allow 9418 -#+end_src - -** Non-Standard SSH Ports - -If you use a non-standard port for SSH, such as =9876=, you will need to create -an SSH configuration file on your local development machine in order to connect -to your server's git repositories. - -To do this, you'll need to define your custom port on your client machine in -your =~/.ssh/config= file: - -#+begin_src sh -nano ~/.ssh/config -#+end_src - -#+begin_src conf -Host git.example.com - # HostName can be a URL or an IP address - HostName git.example.com - Port 9876 - User git -#+end_src - -** Testing SSH - -There are two main syntaxes you can use to manage git over SSH: - -- =git clone [user@]server:project.git= -- =git clone ssh://[user@]server/project.git= - -I prefer the first, which is an =scp=-like syntax. To test it, try to clone the -test repository you set up on the server: - -#+begin_src sh -git clone [email protected]:/git/test.git -#+end_src - -* Enabling Read-Only Access - -If you want people to be able to clone any repository where you've placed a -=git-daemon-export-ok= file, you will need to start the git daemon. - -To do this on a system with =systemd=, create a service file: - -#+begin_src sh -sudo nano /etc/systemd/system/git-daemon.service -#+end_src - -Inside the =git-daemon.service= file, paste the following: - -#+begin_src conf -[Unit] -Description=Start Git Daemon - -[Service] -ExecStart=/usr/bin/git daemon --reuseaddr --base-path=/git/ /git/ - -Restart=always -RestartSec=500ms - -StandardOutput=syslog -StandardError=syslog -SyslogIdentifier=git-daemon - -User=git -Group=git - -[Install] -WantedBy=multi-user.target -#+end_src - -Once created, enable and start the service: - -#+begin_src sh -sudo systemctl enable git-daemon.service -sudo systemctl start git-daemon.service -#+end_src - -To clone read-only via the =git://= protocol, you can use the following syntax: - -#+begin_src sh -git clone git://git.example.com/test.git -#+end_src - -* Migrating Repositories - -At this point, we have a working git server that works with both SSH and -read-only access. - -For each of the repositories I had hosted a different provider, I executed the -following commands in order to place a copy on my server as my new source of -truth: - -Server: - -#+begin_src sh -su git -mkdir /git/<REPOSITORY_NAME>.git && cd /git/<REPOSITORY_NAME>.git -git init --bare - -# If you want to make this repo viewable/cloneable to the public -touch git-daemon-export-ok -#+end_src - -Client: - -#+begin_src sh -git clone git@<PREVIOUS_HOST>:<REPOSITORY_NAME> -git remote set-url origin [email protected]:/git/<REPOSITORY_NAME>.git -git push -#+end_src - -* Optional Web View: =cgit= - -If you want a web viewer for your repositories, you can use various tools, such -as =gitweb=, =cgit=, or =klaus=. I chose =cgit= due to its simple interface and -fairly easy set-up (compared to others). Not to mention that the [[https://git.kernel.org/][Linux kernel -uses =cgit=]]. - -** Docker Compose - -Instead of using my previous method of using a =docker run= command, I've -updated this section to use =docker-compose= instead for an easier installation -and simpler management and configuration. - -In order to use Docker Compose, you will set up a =docker-compose.yml= file to -automatically connect resources like the repositories, =cgitrc=, and various -files or folders to the =cgit= container you're creating: - -#+begin_src sh -mkdir ~/cgit && cd ~/cgit -nano docker-compose.yml -#+end_src - -#+begin_src conf -# docker-compose.yml -version: '3' - -services: - cgit: - image: invokr/cgit - volumes: - - /git:/git - - ./cgitrc:/etc/cgitrc - - ./logo.png:/var/www/htdocs/cgit/logo.png - - ./favicon.png:/var/www/htdocs/cgit/favicon.png - - ./filters:/var/www/htdocs/cgit/filters - ports: - - "8763:80" - restart: always -#+end_src - -Then, just start the container: - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -Once it's finished installing, you can access the site at =<SERVER_IP>:8763= or -use a reverse-proxy service to forward =cgit= to a URL, such as -=git.example.com=. See the next section for more details on reverse proxying a -URL to a local port. - -** Nginx Reverse Proxy - -I am using Nginx as my reverse proxy so that the =cgit= Docker container can use -=git.example.com= as its uniform resource locator (URL). To do so, I simply -created the following configuration file: - -#+begin_src sh -sudo nano /etc/nginx/sites-available/git.example.com -#+end_src - -#+begin_src conf -server { - listen 80; - server_name git.example.com; - - if ($host = git.example.com) { - return 301 https://$host$request_uri; - } - - return 404; -} - -server { - server_name git.example.com; - listen 443 ssl http2; - - location / { - # The final `/` is important. - proxy_pass http://localhost:8763/; - add_header X-Frame-Options SAMEORIGIN; - add_header X-XSS-Protection "1; mode=block"; - proxy_redirect off; - proxy_buffering off; - proxy_set_header Host $host; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Port $server_port; - } - - # INCLUDE ANY SSL CERTS HERE - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; -} -#+end_src - -Once created, symlink it and restart the web server. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/git.example.com /etc/nginx/sites-enabled/ -sudo systemctl restart nginx.service -#+end_src - -As we can see below, my site at =git.example.com= is available and running: - -** Settings Up Git Details - -Once you have =cgit= running, you can add some small details, such as repository -owners and descriptions by editing the following files within each repository. - -Alternatively, you can use the =cgitrc= file to edit these details if you only -care to edit them for the purpose of seeing them on your website. - -The =description= file within the repository on your server will display the -description online. - -#+begin_src sh -cd /git/example.git -nano description -#+end_src - -You can add a =[gitweb]= block to the =config= file in order to display the -owner of the repository. - -#+begin_src sh -cd /git/example.git -nano config -#+end_src - -#+begin_src conf -[gitweb] - owner = "YourName" -#+end_src - -Note that you can ignore the configuration within each repository and simply set -up this information in the =cgitrc= file, if you want to do it that way. - -** Editing =cgit= - -In order to edit certain items within =cgit=, you need to edit the =cgitrc= -file. - -#+begin_src sh -nano ~/cgit/cgitrc -#+end_src - -Below is an example configuration for =cgitrc=. You can find all the -configuration options within the [[https://git.zx2c4.com/cgit/plain/cgitrc.5.txt][configuration manual]]. - -#+begin_src conf -css=/cgit.css -logo=/logo.png -favicon=/favicon.png -robots=noindex, nofollow - -enable-index-links=1 -enable-commit-graph=1 -enable-blame=1 -enable-log-filecount=1 -enable-log-linecount=1 -enable-git-config=1 - -clone-url=git://git.example.com/$CGIT_REPO_URL ssh://[email protected]:/git/$CGIT_REPO_URL - -root-title=My Git Website -root-desc=My personal git repositories. - -# Allow download of tar.gz, tar.bz2 and zip-files -snapshots=tar.gz tar.bz2 zip - -## -## List of common mimetypes -## -mimetype.gif=image/gif -mimetype.html=text/html -mimetype.jpg=image/jpeg -mimetype.jpeg=image/jpeg -mimetype.pdf=application/pdf -mimetype.png=image/png -mimetype.svg=image/svg+xml - -# Highlight source code -# source-filter=/var/www/htdocs/cgit/filters/syntax-highlighting.sh -source-filter=/var/www/htdocs/cgit/filters/syntax-highlighting.py - -# Format markdown, restructuredtext, manpages, text files, and html files -# through the right converters -about-filter=/var/www/htdocs/cgit/filters/about-formatting.sh - -## -## Search for these files in the root of the default branch of repositories -## for coming up with the about page: -## -readme=:README.md -readme=:readme.md -readme=:README.mkd -readme=:readme.mkd -readme=:README.rst -readme=:readme.rst -readme=:README.html -readme=:readme.html -readme=:README.htm -readme=:readme.htm -readme=:README.txt -readme=:readme.txt -readme=:README -readme=:readme - -# Repositories - -# Uncomment the following line to scan a path instead of adding repositories manually -# scan-path=/git - -## Test Section -section=git/test-section - -repo.url=test.git -repo.path=/git/test.git -repo.readme=:README.md -repo.owner=John Doe -repo.desc=An example repository! -#+end_src - -** Final Fixes: Syntax Highlighting & README Rendering - -After completing my initial install and playing around with it for a few days, I -noticed two issues: - -1. Syntax highlighting did not work when viewing the source code within a file. -2. The =about= tab within a repository was not rendered to HTML. - -The following process fixes these issues. To start, let's go to the =cgit= -directory where we were editing our configuration file earlier. - -#+begin_src sh -cd ~/cgit -#+end_src - -In here, create two folders that will hold our syntax files: - -#+begin_src sh -mkdir filters && mkdir filters/html-converters && cd filters -#+end_src - -Next, download the default filters: - -#+begin_src sh -curl https://git.zx2c4.com/cgit/plain/filters/about-formatting.sh > about-formatting.sh -chmod 755 about-formatting.sh -curl https://git.zx2c4.com/cgit/plain/filters/syntax-highlighting.py > syntax-highlighting.py -chmod 755 syntax-highlighting.py -#+end_src - -Finally, download the HTML conversion files you need. The example below -downloads the Markdown converter: - -#+begin_src sh -cd html-converters -curl https://git.zx2c4.com/cgit/plain/filters/html-converters/md2html > md2html -chmod 755 md2html -#+end_src - -If you need other filters or html-converters found within [[https://git.zx2c4.com/cgit/tree/filters][the cgit project -files]], repeat the =curl= and =chmod= process above for whichever files you need. - -However, formatting will not work quite yet since the Docker cgit container -we're using doesn't have the formatting package installed. You can install this -easily by install Python 3+ and the =pygments= package: - -#+begin_src sh -# Enter the container's command line -sudo docker exec -it cgit bash -#+end_src - -#+begin_src sh -# Install the necessary packages and then exit -yum update -y && \ -yum upgrade -y && \ -yum install python3 python3-pip -y && \ -pip3 install markdown pygments && \ -exit -#+end_src - -*You will need to enter the cgit docker container and re-run these =yum= -commands every time you kill and restart the container!* - -If not done already, we need to add the following variables to our =cgitrc= file -in order for =cgit= to know where our filtering files are: - -#+begin_src conf -# Highlight source code with python pygments-based highlighter -source-filter=/var/www/htdocs/cgit/filters/syntax-highlighting.py - -# Format markdown, restructuredtext, manpages, text files, and html files -# through the right converters -about-filter=/var/www/htdocs/cgit/filters/about-formatting.sh -#+end_src - -Now you should see that syntax highlighting and README rendering to the =about= -tab is fixed. - -** Theming - -I won't go into much detail in this section, but you can fully theme your -installation of =cgit= since you have access to the =cgit.css= file in your web -root. This is another file you can add as a volume to the =docker-compose.yml= -file if you want to edit this without entering the container's command line. - -*** Remember to Back Up Your Data! - -The last thing to note is that running services on your own equipment means that -you're assuming a level of risk that exists regarding data loss, catastrophes, -etc. In order to reduce the impact of any such occurrence, I suggest backing up -your data regularly. - -Backups can be automated via =cron=, by hooking your base directory up to a -cloud provider, or even setting up hooks to push all repository info to git -mirrors on other git hosts. Whatever the method, make sure that your data -doesn't vanish in the event that your drives or servers fail. -#+date: <2022-07-14 Thu 00:00:00> -#+title: Getting Started with GPG: Secure Encryption, Signing, and Key Usage -#+description: Technical manual covering the architecture, cryptographic algorithms, vulnerability considerations, key management, and typical applications of GNU Privacy Guard for secure data and email encryption. -#+slug: gnupg - -* The History of GPG - -[[https://gnupg.org/][GNU Privacy Guard]], also known as GnuPG and GPG, is a free ("free" as in both -speech and beer) software that fully implements the OpenPGP Message Format -documented in [[https://www.rfc-editor.org/rfc/rfc4880][RFC 4880]]. - -I won't go in-depth on the full history of the software in this post, but it is -important to understand that GPG is not the same as PGP (Pretty Good Privacy), -which is a different implementation of RFC 4880. However, GPG was designed to -interoperate with PGP. - -GPG was originally developed in the late 1990s by [[https://en.wikipedia.org/wiki/Werner_Koch][Werner Koch]] and has -historically been funded generously by the German government. - -Now that we have all the high-level info out of the way, let's dive into the -different aspects of GPG and its uses. - -* Encryption Algorithms - -GPG supports a wide range of different encryption algorithms, including -public-key, cipher, hash, and compression algorithms. The support for these -algorithms has grown since the adoption of the Libgcrypt library in the 2.x -versions of GPG. - -As you will be able to see below in an example of a full key generation with the -GPG command line tool, GPG recommends the following algorithms to new users: - -#+begin_src sh -Please select what kind of key you want: - (1) RSA and RSA - (2) DSA and Elgamal - (3) DSA (sign only) - (4) RSA (sign only) - (9) ECC (sign and encrypt) *default* - (10) ECC (sign only) -#+end_src - -I am not doing an in-depth explanation here in order to keep the focus on GPG -and not encryption algorithms. If you want a deep dive into cryptography or -encryption algorithms, please read my other posts: - -- [[https://cleberg.net/blog/aes-encryption.html][How AES Encryption Works]] (2018) -- [[https://cleberg.net/blog/cryptography.html][A Practical Guide to Encryption, Keys, and Secure Communication]] (2020) - -** Vulnerabilities - -As of 2022-07-14, there are a few different vulnerabilities associated with GPG -or the libraries it uses: - -- GPG versions 1.0.2--1.2.3 contains a bug where "as soon as one (GPG-generated) - ElGamal signature of an arbitrary message is released, one can recover the - signer's private key in less than a second on a PC." ([[https://www.di.ens.fr/~pnguyen/pub_Ng04.htm][Source]]) -- GPG versions prior to 1.4.2.1 contain a false positive signature verification - bug. ([[https://lists.gnupg.org/pipermail/gnupg-announce/2006q1/000211.html][Source]]) -- GPG versions prior to 1.4.2.2 cannot detect injection of unsigned data. ( - [[https://lists.gnupg.org/pipermail/gnupg-announce/2006q1/000218.html][Source]]) -- Libgcrypt, a library used by GPG, contained a bug which enabled full key - recovery for RSA-1024 and some RSA-2048 keys. This was resolved in a GPG - update in 2017. ([[https://lwn.net/Articles/727179/][Source]]) -- The [[https://en.wikipedia.org/wiki/ROCA_vulnerability][ROCA Vulnerability]] affects RSA keys generated by YubiKey 4 tokens. - ([[https://crocs.fi.muni.cz/_media/public/papers/nemec_roca_ccs17_preprint.pdf][Source]]) -- The [[https://en.wikipedia.org/wiki/SigSpoof][SigSpoof Attack]] allows an attacker to spoof digital signatures. ([[https://arstechnica.com/information-technology/2018/06/decades-old-pgp-bug-allowed-hackers-to-spoof-just-about-anyones-signature/][Source]]) -- Libgcrypt 1.9.0 contains a severe flaw related to a heap buffer overflow, - fixed in Libgcrypt 1.9.1 ([[https://web.archive.org/web/20210221012505/https://www.theregister.com/2021/01/29/severe_libgcrypt_bug/][Source]]) - -*** Platforms - -Originally developed as a command-line program for *nix systems, GPG now has a -wealth of front-end applications and libraries available for end-users. However, -the most recommended programs remain the same: - -- [[https://gnupg.org][GnuPG]] for Linux (depending on distro) -- [[https://gpg4win.org][Gpg4win]] for Windows -- [[https://gpgtools.org][GPGTools]] for macOS - -* Creating a Key Pair - -In order to create a GPG key pair, a user would first need to install GPG on -their system. If we're assuming that the user is on Fedora Linux, they would -execute the following: - -#+begin_src sh -sudo dnf install gpg -#+end_src - -Once installed, a user can create a new key pair with the following command(s): - -#+begin_src sh -gpg --full-generate-key -#+end_src - -GPG will walk the user through an interactive setup that asks for an algorithm -preference, expiration date, name, and email to associate with this key. - -See the following example key set-up for a default key generation using the -GnuPG command-line interface: - -#+begin_src sh -gpg (GnuPG) 2.3.6; Copyright (C) 2021 Free Software Foundation, Inc. -This is free software: you are free to change and redistribute it. -There is NO WARRANTY, to the extent permitted by law. - -Please select what kind of key you want: - (1) RSA and RSA - (2) DSA and Elgamal - (3) DSA (sign only) - (4) RSA (sign only) - (9) ECC (sign and encrypt) *default* - (10) ECC (sign only) - (14) Existing key from card -Your selection? 9 -Please select which elliptic curve you want: - (1) Curve 25519 *default* - (4) NIST P-384 -Your selection? 1 -Please specify how long the key should be valid. - 0 = key does not expire - <n> = key expires in n days - <n>w = key expires in n weeks - <n>m = key expires in n months - <n>y = key expires in n years -Key is valid for? (0) 0 -Key does not expire at all -Is this correct? (y/N) y - -GnuPG needs to construct a user ID to identify your key. - -Real name: John Doe -Email address: [email protected] -Comment: test key -You selected this USER-ID: - "John Doe (test key) <[email protected]>" - -Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. -We need to generate a lot of random bytes. It is a good idea to perform -some other action (type on the keyboard, move the mouse, utilize the -disks) during the prime generation; this gives the random number -generator a better chance to gain enough entropy. -gpg: revocation certificate stored as 'example.rev' -public and secret key created and signed. - -pub ed25519 2022-07-14 [SC] - E955B7700FFC11EF51C2BA1FE096AACDD4C32E9C -uid John Doe (test key) <[email protected]> -sub cv25519 2022-07-14 [E] -#+end_src - -Please note that graphical apps may differ slightly from the GPG command-line -interface. - -* Common Usage - -As noted in RFC (Request for Comments) 4880, the general functions of OpenPGP -are as follows: - -- digital signatures -- encryption -- compression -- Radix-64 conversion -- key management and certificate services - -From this, you can probably gather that the main use of GPG is for encrypting -data and/or signing the data with a key. The purpose of encrypting data with GPG -is to ensure that no one except the intended recipient(s) can access the data. - -Let's explore some specific GPG use-cases. - -** Email - -One of the more popular uses of GPG is to sign and/or encrypt emails. With the -use of a GPG keypair, you can encrypt a message, its subject, and even the -attachments within. - -The first process, regarding the signing of a message without any encryption, is -generally used to provide assurance that an email is truly coming from the -sender that the message claims. When I send an email, and it's signed with my -public key, the recipient(s) of the message can verify that the message was -signed with my personal key. - -The second process, regarding the actual encryption of the message and its -contents, works by using a combination of the sender's keys and the recipient's -keys. This process may vary slightly by implementation, but it most commonly -uses asymmetric cryptography, also known as public-key cryptography. In this -version of encryption, the sender's private key to sign the message and a -combination of the sender's keys and the recipient's public key to encrypt the -message. - -If two people each have their own private keys and exchange their public keys, -they can send encrypted messages back and forth with GPG. This is also possible -with symmetric cryptography, but the process differs since there are no key -pairs. - -Implementation of email encryption varies greatly between email clients, so you -will need to reference your email client's documentation to ensure you are -setting it up correctly for that specific client. - -** File Encryption - -As noted in the section above regarding emails, GPG enables users to be able to -send a message to each other if they are both set-up with GPG keys. In this -example, I am going to show how a user could send a file called -=example_file.txt= to another user via the recipient's email. - -The sender would find the file they want to send and execute the following -command: - -#+begin_src sh -gpg --encrypt --output example_file.txt.gpg --recipient \ [email protected] example_file.txt -#+end_src - -Once received, the recipient can decrypt the file with the following command: - -#+begin_src sh -gpg --decrypt --output example_file.txt example_file.txt.gpg -#+end_src - -** Ownership Signatures - -One important aspect of GPG, especially for developers, is the ability to sign -data without encrypting it. For example, developers often sign code changes when -they commit the changes back to a central repository, in order to display -ownership of who made the changes. This allows other users to look at a code -change and determine that the change was valid. - -In order to do this using [[https://git-scm.com][Git]], the developer simply needs to alter the =git -commit= command to include the =-S= flag. Here's an example: - -#+begin_src sh -git commit -S -m "my commit message" -#+end_src - -As an expansion of the example above, Git users can configure their environment -with a default key to use by adding their GPG signature: - -#+begin_src sh -git config --global user.signingkey XXXXXXXXXXXXXXXX -#+end_src - -If you're not sure what your signature is, you can find it titled =sig= in the -output of this command: - -#+begin_src sh -gpg --list-signatures -#+end_src - -** File Integrity - -When a person generates a signature for data, they are allowing users the -ability to verify the signature on that data in the future to ensure the data -has not been corrupted. This is most common with software applications hosted on -the internet - developers provide signatures so that users can verify a website -was not hijacked and download links replaced with dangerous software. - -In order to verify signed data, a user needs to have: - -1. The signed data -2. A signature file -3. The public GPG key of the signer - -Once the signer's public key is imported on the user's system, and they have the -data and signature, they can verify the data with the following commands: - -#+begin_src sh -# If the signature is attached to the data -gpg --verify [signature-file] - -# If the signature is detached as a separate file from the data -gpg --verify [signature-file] [original-file] -#+end_src - -*** Finding Public Keys - -In order to use GPG with others, a user needs to know the other user(s) keys. -This is easy to do if the user knows the other user(s) in person, but may be -hard if the relationship is strictly digital. Luckily, there are a few options. -The first option is to look at a user's web page or social pages if they have -them. - -Otherwise, the best option is to use a keyserver, such as: - -- [[https://pgp.mit.edu][pgp.mit.edu]] -- [[https://keys.openpgp.org][keys.openpgp.org]] -#+date: <2022-07-25 Mon 00:00:00> -#+title: Curseradio: A Lightweight Command-Line Internet Radio Player for Linux -#+description: Stepwise instructions for installing and utilizing Curseradio, a lightweight command-line program for streaming radio stations within Linux environments. -#+slug: curseradio - -* Overview - -While exploring some interesting Linux applications, I stumbled across -[[https://github.com/chronitis/curseradio][curseradio]], a command-line radio player based on Python. - -This application is fantastic and incredibly easy to install, so I wanted to -dedicate a post today to this app. Let's look at the features within the app and -then walk through the installation process I took to get =curseradio= working. - -* Features - -The radio player itself is quite minimal. As you can see in the screenshot -above, it contains a simple plaintext list of all available categories, which -can be broken down further and further. In addition, radio shows are available -for listening, alongside regular radio stations. - -For example, the =Sports= > =Pro Basketball= > =Shows= category contains a -number of specific shows related to Professional Basketball. - -Aside from being able to play any of the listed stations/shows, you can make a -channel your favorite by pressing =f=. It will now show up at the top of the -radio player in the =Favourites= category. - -** Commands/Shortcuts - -| Key(s) | Command | -|------------+---------------------------------| -| ↑, ↓ | navigate | -| PgUp, PgDn | navigate quickly | -| Home, End | to top/bottom | -| Enter | open/close folders, play stream | -| k | stop playing stream | -| q | quit | -| f | toggle favourite | - -* Installation - -** Dependencies - -Before installing =curseradio=, a handful of system and Python packages are -required. To get started, install =python3=, =pip3=, and =mpv= on your system. -In this example, I'm using Fedora Linux, which uses the =dnf= package manager. -You may need to adjust this if you're using a different system. - -#+begin_src sh -sudo dnf install python3 pip3 mpv -#+end_src - -Next, use =pip3= to install =requests=, =xdg=, and =lxml=: - -#+begin_src sh -pip3 install requests xdg lxml -#+end_src - -** Repository Source Installation - -Once all the dependencies are installed, we can clone the source code and enter -that directory: - -#+begin_src sh -git clone https://github.com/chronitis/curseradio && cd curseradio -#+end_src - -Once you're within the =curseradio= directory, you can install the application -with the provided =setup.py= script. - -#+begin_src sh -sudo python3 setup.py install -#+end_src - -In my case, I ran into a few errors and needed to create the folders that -curseradio wanted to use for its installation. If you don't get any errors, you -can skip this and run the app. - -#+begin_src sh -sudo mkdir /usr/local/lib/python3.10/ -sudo mkdir /usr/local/lib/python3.10/site-packages/ -#+end_src - -#+begin_src sh -sudo chown -R $USER:$USER /usr/local/lib/python3.10/ -#+end_src - -* Run the Application - -Once fully installed without errors, you can run the application! - -#+begin_src sh -python3 /usr/local/bin/curseradio -#+end_src -#+date: <2022-07-30 Sat 00:00:00> -#+title: Automating Recursive FLAC to Opus Conversion with a Bash Script -#+description: Instructions for automating the conversion of audio files from FLAC to Opus format recursively within directory structures, including performance considerations and script usage. -#+slug: flac-to-opus - -* Converting FLAC to OPUS - -I am currently rebuilding my music library from scratch so that I can -effectively archive all the music I own in [[https://wikipedia.org/wiki/FLAC][FLAC]] (Free Lossless Audio Codec) -files. - -However, streaming FLAC files outside the home can be difficult due to the size -of the files, especially if you're using a weak connection. - -So, in order to archive the music in a lossless format and still be able to -stream it easily, I opted to create a copy of my FLAC files in the [[https://en.wikipedia.org/wiki/Opus_(audio_format)][Opus audio -codec]]. This allows me to archive a quality, lossless version of the music and -then point my streaming service to the smaller, stream-ready version. - -** Dependencies - -The process I follow utilizes the =opus-tools= package in Ubuntu. Before -proceeding, install the package: - -#+begin_src sh -sudo apt install opus-tools -#+end_src - -If you want to use a different conversion method, such as =ffmpeg= or =avconv=, -simply install that package instead. - -** Conversion Process - -The script I'm using is stored in my home directory, but feel free to create it -wherever you want. It does not need to be in the same directory as your music -files. - -#+begin_src sh -cd ~ && nano transform.sh -#+end_src - -Once you have your new bash script opened in an editor, go ahead and paste the -following logic into the script. - -You *MUST* edit the following variables in order for it to work: - -- =source=: The source directory where your FLAC files are stored. -- =dest=: The destination directory where you want the resulting Opus files to - be stored. - -You *MAY* want to edit the following variables to suit your needs: - -- =filename=: If you are converting to a file format other than Opus, you'll - need to edit this so that your resulting files have the correct filename - extension. -- =reldir=: This variable can be edited to strip out more leading directories in - the file path. As you'll see later, I ignore this for now and simply clean it - up afterward. -- =opusenc=: This is the actual conversion process. You may want to edit the - bitrate to suit your needs. I set mine at 128 but some prefer 160 or higher. - -#+begin_src sh -#!/bin/bash -## - The IFS takes care of spaces in file and dirnames -## - your folders may vary -## - what you mount to the folders does not matter -## - in RELDIR, the f5 most likely MUST be edited, -## since its responsible, how many leading directories -## will be removed from the directory structure in order -## to append that exact path to the outfile -## - the commented echos are still in place in order to give -## you the variables for testing, before running. - -IFS=$'\n' - -## the paths given here contain the directory structure that I want to keep -## source=/mnt/music/archives/ARTIST/ALBUM/FLACFILE.flac -## local=/mnt/music/library/ARTIST/ALBUM/OPUSFILE.opus - -source=/mnt/music/archives -dest=/mnt/music/library - -for i in $(find $source -type f -iname '*.flac' ); -do -## SET VARIABLES for PATHS and FILENAMES - fullfile=$i - filename="${i##*/}" - filename="${filename%.*}.opus" - fulldir=$(dirname "${i}") - reldir="$(echo $fulldir | cut -d'/' -f5-)" - reldir=${reldir//flac} - outdir="$dest/$reldir" - outfile="$outdir/$filename" - -# is that working? -# outfile='$local/""$(echo $(dirname "${i}") | cut -d'/' -f5-)"//flac"/"${i##*/}"' -# echo 'output file: ' "$outfile" - -## SHOW ME THE CONTENTS of the VARIABLES -# echo 'File found:' "$i" -# echo 'Relative dir: ' "$reldir" -# echo 'directory will be created: ' "$outdir" -# echo 'Filename: ' "$filename" -# echo 'FileExt: ' "$extension" -# echo 'output file: ' "$outfile" - -echo "\n\n" - -## CREATE Output Folders - mkdir -p "$outdir" - -## RUN -# ffmpeg and avconv are alternative options if opusenc isn't adequate -opusenc --vbr --bitrate 128 --date "$DATE" \ ---title "$TITLE" --artist "$ARTIST" --album "$ALBUM" --genre "$GENRE" \ ---comment "ALBUMARTIST=$ALBUMARTIST" --comment "DISCNUMBER=$DISCNUMBER" \ ---comment "TRACKNUMBER=$TRACKNUMBER" --comment "TRACKTOTAL=$TRACKTOTAL" \ ---comment "LYRICS=$LYRICS" "$fullfile" "$outfile" - - -## just for testing -# sleep 1 -done -#+end_src - -Once you're done, simply save the file and exit your editor. Don't forget to -enable execution of the script: - -#+begin_src sh -chmod +x transform.sh -#+end_src - -Finally, you may now run the script: - -#+begin_src sh -./transform.sh -#+end_src - -If you used =opusenc=, you'll see the conversions happen within the terminal as -it progresses. You will also see variables printed if you uncommented any of the -bash script's comments. - -** Cleanup - -As I noted above, I didn't customize my =reldir= variable in the script, which -caused my output directory to be =/mnt/music/library/archives= instead of -=/mnt/music/library=. So, I moved the output up one level and deleted the -accidental directory. - -#+begin_src sh -cd /mnt/music/library -mv archives/** . -rm -rf archives -#+end_src - -** Check the Resulting Size - -If you want to see what kind of file size savings you've gained, you can always -use the =du= command to check: - -#+begin_src sh -cd /mnt/music -du -h --max-depth=1 . -#+end_src - -In my case, my small library went from 78GB to 6.3GB! - -#+begin_src txt -78G ./archives -6.3G ./library -#+end_src -#+date: <2022-07-31 Sun 00:00:00> -#+title: Boosting Bash Productivity: Using Bash-it and ble.sh for Plugins and Autosuggestions -#+description: Guide to augmenting Bash shell features by integrating Bash-It framework along with ble.sh for input autosuggestions, improving command-line efficiency on Linux systems. -#+slug: bash-it - -* Bash - -For those who are not familiar, [[https://en.wikipedia.org/wiki/Bash_(Unix_shell)][Bash]] is a Unix shell that is used as the default -login shell for most Linux distributions. This shell and command processor -should be familiar if you've used Linux (or older version of macOS) before. - -However, bash is not the only option. There are numerous other shells that -exist. Here are some popular examples: - -- [[https://en.wikipedia.org/wiki/Z_shell][zsh]] -- [[https://en.wikipedia.org/wiki/Fish_(Unix_shell)][fish]] -- [[https://github.com/ibara/oksh][oksh]] -- [[https://wiki.gentoo.org/wiki/Mksh][mksh]] -- [[https://en.wikipedia.org/wiki/Debian_Almquist_shell][dash]] - -While each shell has its differences, bash is POSIX compliant and the default -for many Linux users. Because of this, I am going to explore a program called -=bash-it= below that helps bash users increase the utility of their shell -without installing a completely new shell. - -** Installation - -First, if bash is not already installed on your system, you can [[https://www.gnu.org/software/bash/][download bash -from GNU]] or use your package manager to install it. - -For example, this is how you can install bash on Fedora Linux: - -#+begin_src sh -sudo dnf install bash -#+end_src - -If you are not using bash as your default shell, use the =chsh= command to -change your shell: - -#+begin_src sh -chsh -#+end_src - -You should see a prompt like the one below. If the brackets (=[]=) contain -=bash= already, you're done, and you can simply continue by hitting the Enter -key. - -If the brackets contain another shell path (e.g. =/usr/bin/zsh=), enter the path -to the bash program on your system (it's most likely located at -=/usr/bin/bash=). - -#+begin_src sh -Changing shell for <user>. -New shell [/usr/bin/bash]: -#+end_src - -You must log out or restart the machine in order for the login shell to be -refreshed. You can do it now or wait until you're finished customizing the -shell. - -#+begin_src sh -sudo reboot now -#+end_src - -* Bash-it - -As noted on the [[https://github.com/Bash-it/bash-it][Bash-it]] repository: - -#+begin_quote -Bash-it is a collection of community Bash commands and scripts for Bash -3.2+. (And a shameless ripoff of oh-my-zsh 😃) -#+end_quote - -Bash-it makes it easy to install plugins, set up aliases for common commands, -and easily change the visual theme of your shell. - -** Installation - -To install the framework, simply copy the repository files and use the -=install.sh= script provided. If you want, you can (and should!) inspect the -contents of the installation script before you run it. - -#+begin_src sh -git clone --depth=1 https://github.com/Bash-it/bash-it.git ~/.bash_it -~/.bash_it/install.sh -#+end_src - -If you didn't restart your session after making bash the default, and are -currently working within another shell, be sure to enter a bash session before -using =bash-it=: - -#+begin_src sh -bash -#+end_src - -** Aliases - -Bash-it contains a number of aliases for common commands to help improve -efficiency in the terminal. To list all available options, use the following -command: - -#+begin_src sh -bash-it show aliases -#+end_src - -This will provide you a list that looks like the following text block. Within -this screen, you will be able to see all available options and which ones are -currently enabled. - -#+begin_src txt -Alias Enabled? Description -ag [ ] the silver searcher (ag) aliases -ansible [ ] ansible abbreviations -apt [ ] Apt and dpkg aliases for Ubuntu and Debian distros. -atom [ ] Atom.io editor abbreviations -bash-it [ ] Aliases for the bash-it command (these aliases are automatically included with the "general" aliases) -bolt [ ] puppet bolt aliases -bundler [ ] ruby bundler -clipboard [ ] xclip shortcuts -composer [ ] common composer abbreviations -curl [x] Curl aliases for convenience. -... -#+end_src - -To enable an alias, do: - -#+begin_src sh -bash-it enable alias <alias name> [alias name]... -or- $ bash-it enable alias all -#+end_src - -To disable an alias, do: - -#+begin_src sh -bash-it disable alias <alias name> [alias name]... -or- $ bash-it disable alias all -#+end_src - -** Plugins - -Similar to aliases, plugins are available with bash-it. You can find a complete -list of plugins in the same way as aliases. Simply execute the following: - -#+begin_src sh -bash-it show plugins -#+end_src - -You will see the following output showing enabled and disabled plugins: - -#+begin_src txt -Plugin Enabled? Description -alias-completion [ ] -autojump [ ] Autojump configuration, see https://github.com/wting/autojump for more details -aws [ ] AWS helper functions -base [x] miscellaneous tools -basher [ ] initializes basher, the shell package manager -battery [x] display info about your battery charge level -blesh [ ] load ble.sh, the Bash line editor! -boot2docker [ ] Helpers to get Docker setup correctly for boot2docker -browser [ ] render commandline output in your browser -#+end_src - -To enable a plugin, do: - -#+begin_src sh -bash-it enable plugin <plugin name> [plugin name]... -or- $ bash-it enable plugin all -#+end_src - -To disable a plugin, do: - -#+begin_src sh -bash-it disable plugin <plugin name> [plugin name]... -or- $ bash-it disable plugin all -#+end_src - -** Themes - -There are quite a few pre-defined [[https://bash-it.readthedocs.io/en/latest/themes-list/#list-of-themes][themes]] available with bash-it. - -To list all themes: - -#+begin_src sh -ls ~/.bash_it/themes/ -#+end_src - -To use a new theme, you'll need to edit =.bashrc= and alter the =BASH_IT_THEME= -variable to your desired theme. For example, I am using the =zork= theme. - -#+begin_src sh -nano ~/.bashrc -#+end_src - -#+begin_src sh -export BASH_IT_THEME='zork' -#+end_src - -Once you save your changes, you just need to exit your terminal and create a new -one in order to see your changes to the =.bashrc= file. You can also =source= -the file to see changes, but I recommend starting a completely new shell -instead. - -*** ble.sh - -One big feature I was missing in Bash that both =zsh= and =fish= have is an -autosuggestion feature. To explain: as you type, an autosuggestion feature in -the shell will offer suggestions in a lighter font color beyond the characters -already typed. Once you see the command you want, you can click the right arrow -and have the shell auto-complete that line for you. - -Luckily, the [[https://github.com/akinomyoga/ble.sh][Bash Line Editor]] (ble.sh) exists! This program provides a wonderful -autosuggestions feature perfectly, among other features that I haven't tested -yet. - -In order to install ble.sh, execute the following: - -#+begin_src sh -git clone --recursive https://github.com/akinomyoga/ble.sh.git -make -C ble.sh install PREFIX=~/.local -echo 'source ~/.local/share/blesh/ble.sh' >> ~/.bashrc -#+end_src - -Again, exit the terminal and open a new one in order to see the newly-configured -shell. - -* Restart the Session - -Finally, as mentioned above, you'll need to restart the session to ensure that -your user is using bash by default. - -You will also need to exit and re-open a shell (e.g., terminal or terminal tab) -any time you make changes to the =.bashrc= file. - -#+begin_src sh -sudo reboot now -#+end_src -#+date: <2022-08-31 Wed 00:00:00> -#+title: Privacy.com Shifts From Prepaid Debit to Charge Card: What Users Need to Know -#+description: Detailed examination of modifications to Privacy.com service terms and their implications on user privacy and payment security protocols. -#+slug: privacy-com-changes - -* Privacy.com Changes Their Terms - -Recently, Privacy.com reached out to their customers regarding a change in their -terms of use. Further, all customers are required to agree to the changes in -order to continue using their accounts. - -[[https://privacy.com/commercial-cardholder-agreement][You can view the new cardholder agreement here]]. - -When you log in, you'll be greeted with a pop-up window asking you to review and -agree to the new terms of use. You will also not be able to open any new cards -until the terms are agreed to. - -** Changing from a "Prepaid Debit" Model to a "Charge Card" Model - -The actual content of the changes is interesting. While the historical model of -using Privacy.com was akin to prepaid debit cards, the new model is very similar -to a credit card (they use the term "charge card"). - -I have used Privacy.com for 1-2 years, and the process was always that you would -create a single-use or merchant-locked card. This card could be used for any -dollar limit you set and would immediately draw the funds from whatever funding -source you connected, e.g. PayPal account or a bank account. - -The benefit this service provides with a premium account is masking the merchant -names from your funding source. If you have a concern that your bank account -uses merchant data from your account, you could direct all charges through -Privacy.com and set the merchant as one of their pre-set options, such as -"Smiley's Corner Store" or "NSA Gift Shop." - -The new model still works with a bank account as a funding source, but the model -is changed so that you get a "line of credit" set according to a 14-day billing -cycle. It seems that Privacy.com will now allow charges to be incurred without -being immediately paid. - -** Daily Payments and Available Credit - -Instead of paying as charges are incurred, you must make a "Daily Payment" and -your "Available Credit" will be locked until you make that payment. There are -also "End of Billing Cycle Payments" that are assigned a due date. - -Further, Privacy.com will decline charges that would cause you to exceed your -Available Credit or Credit Limit. - -One particular interesting section states the following: - -#+begin_quote -YOUR OBLIGATION TO PAY US BACK FOR ALL CARD TRANSACTIONS AND OTHER -OBLIGATIONS YOU INCUR IS SECURED BY THE SECURED ACCOUNT. IF YOU DO NOT -PAY US BACK FOR ANY AMOUNT YOU OWE US WHEN YOUR PAYMENTS ARE DUE, WE -WILL EXERCISE OUR INTEREST AND DEBIT THE SECURED ACCOUNT, AND YOU WILL -LOSE THE MONEY IN THE SECURED ACCOUNT. SEE SECTION 8: SECURITY AGREEMENT -FOR MORE INFORMATION. -#+end_quote - -** Personal Information - -Now that Privacy.com is more of a financial institution, they are obligated to -comply with the [[https://en.wikipedia.org/wiki/Know_your_customer][know your customer]] guidelines/laws. - -I did not proceed with the change to my Privacy.com account, but I have heard -from some peers that the changes require more personal information to be -submitted, such as SSN (Social Security Number). I am not aware of all new -personal information required or if the funding source is now required to only -be a bank account. - -** Fees - -Luckily, the fees section did not change much. The subscription fees for a -premium account are still the only fees. - -* My Thoughts - -Personally, I wiped my personal information from my account and then permanently -deleted it when I heard about these changes. I have no interest in yet another -method of credit lending offered by private companies. While I accepted that -they would have access to my bank account information for the purposes of paying -off my prepaid debit payments, I have no interest in incurring charges that will -need to be paid back at a later date. I also have no interest in submitting -personal information to Privacy.com. - -This type of change toward a "buy it now, pay us later" model is concerning, and -I will be watching Privacy.com to see if they further their interests in the -credit model as time goes on. - -Could we see them start charging interest, fees, etc.? I'm not sure, but this -change does not inspire confidence in their mission as a privacy-focused -company. -#+date: <2022-09-17 Sat 00:00:00> -#+title: Building and Exploring SerenityOS: A Retro-Inspired Unix-Like Desktop -#+description: Technical overview of Serenity OS including system architecture, building procedures, and operational instructions for this Unix-like operating system with a 1990s user interface style. -#+slug: serenity-os - -* Overview - -[[https://serenityos.org][SerenityOS]] is a unique operating system (OS) that I have seen pop up in my news -feed a few times over the last few years, but I have never had time to test it -out until now. - -Testing out this system brought back fond memories of yellowed, -modem-screeching, 100-pound computers that brought so many fond memories to my -youth. - -Per their website: - -#+begin_quote -A graphical Unix-like operating system for desktop computers! - -SerenityOS is a love letter to '90s user interfaces with a custom -Unix-like core. It flatters with sincerity by stealing beautiful ideas -from various other systems. - -Roughly speaking, the goal is a marriage between the aesthetic of -late-1990s productivity software and the power-user accessibility of -late-2000s *nix. - -This is a system by us, for us, based on the things we like. -#+end_quote - -* Building - -Your first question may be "Where's the iso?" and the answer is... there are -none. SerenityOS does not provide pre-built images for testing. You must build -the images yourself. This seems intentionally to limit participation to only -those who are truly interested enough to learn how to build the OS. - -** Clone - -In order to get started, you'll need to clone the source repository: - -#+begin_src sh -git clone https://github.com/SerenityOS/serenity && cd serenity -#+end_src - -** Build - -Note that I followed the [[https://github.com/SerenityOS/serenity/blob/master/Documentation/BuildInstructions.md][Build Instructions]] in the SerenityOS repository as of -commit =660d2b53b1206e868d5470eee80b5e62d7e30da7=. Things may have changed since -my installation, and you should double-check the instructions first. - -Regardless, I want to repeat my steps here to illustrate any errors or differing -commands I needed to run in order to build and run SerenityOS. - -Since I am running Fedora, I needed to install these packages in order to build -the OS images: - -#+begin_src sh -sudo dnf install texinfo binutils-devel curl cmake mpfr-devel libmpc-devel gmp-devel e2fsprogs ninja-build patch ccache rsync @"C Development Tools and Libraries" @Virtualization -#+end_src - -Next, make sure you're inside the =serenity= directory created earlier during -the git cloning process and process to build the toolchain: - -#+begin_src sh -Meta/serenity.sh rebuild-toolchain -#+end_src - -Once the toolchain is built, you can Build and run the OS! - -#+begin_src sh -Meta/serenity.sh run -#+end_src - -After this process is completed, the image should run automatically and -launch. - -* Issues - -I played around in SerenityOS for an hour or two in order to see what I could do -and had a lot of fun with it. The only issue I ran into was a lack of working -internet. I didn't try very hard, but I could tell that the main network link -wasn't connecting to my Fedora host properly. - -* Screenshots - -The initial launch of the image displays the SerenityOS desktop, with a simple -terminal already launched. - -There is also a "Fire" application (literally just shows fire burning), a -browser with the local Serenity Browser page loaded, and a text editor. - -I also poked around the system utilities and found most tools you'd expect to -find within a standard desktop, such as a system monitoring tool. - -Lastly, I noted that the default desktop contains numerous pre-defined themes to -choose from. This is a small piece, but it's actually wonderful to see desktop -developers consider theming directly out of the box rather than using an -addon-based mentality. - -I didn't take a screenshot of the other pre-installed games, but I did spend -nearly 30 minutes playing Solitaire before remembering that I was supposed to be -writing a post about the OS. -#+date: <2022-09-21 Wed 00:00:00> -#+title: Installing GrapheneOS on Pixel 6 Pro -#+description: Step-by-step instructions to perform secure installation of the GrapheneOS operating system on Google Pixel 6 Pro hardware platform. -#+slug: graphene-os - -* Introduction - -After using iOS for a couple of years, I finally took the plunge and purchased a -Pixel 6 Pro in order to test and use [[https://grapheneos.org][GrapheneOS]]. - -The installation process was rather quick once you have the tools and files you -need. Overall, it can be done in just a few minutes. - -* Gathering Tools & Files - -** Android Tools - -First, in order to interact with the device, we will need the [[https://developer.android.com/studio/releases/platform-tools.html][Android platform -tools]]. Find the Linux download and save the ZIP folder to your preferred -location. - -Once we've downloaded the files, we will need to unzip them, enter the -directory, and move the necessary executables to a central location, such as -=/usr/bin/=. For this installation, we only need the =fastboot= and =adb= -executables. - -#+begin_src sh -cd ~/Downloads -#+end_src - -#+begin_src sh -unzip platform-tools_r33.0.3-linux.zip -cd platform-tools -sudo mv fastboot /usr/bin/ -sudo mv adb /usr/bin -#+end_src - -** GrapheneOS Files - -Next, we need the [[https://grapheneos.org/releases][GrapheneOS files]] for our device and model. For example, the -Pixel 6 Pro is codenamed =raven= on the release page. - -Once we have the links, let's download them to our working directory: - -#+begin_src sh -curl -O https://releases.grapheneos.org/factory.pub -curl -0 https://releases.grapheneos.org/raven-factory-2022091400.zip -curl -0 https://releases.grapheneos.org/raven-factory-2022091400.zip.sig -#+end_src - -1. Validate Integrity - - In order to validate the integrity of the downloaded files, we will need the - =signify= package and Graphene's =factory.pub= file. - - #+begin_src sh - sudo dnf install signify - #+end_src - - #+begin_src sh - curl -O https://releases.grapheneos.org/factory.pub - #+end_src - - Then we can validate the files and ensure that no data was corrupted or - modified before it was saved to our device. - - #+begin_src sh - signify -Cqp factory.pub -x raven-factory-2022091400.zip.sig && echo verified - #+end_src - -2. Unzip Files - - Once the files are verified, we can unzip the Graphene image and enter the - directory: - - #+begin_src sh - unzip raven-factory-2022091400.zip && cd raven-factory-2022091400 - #+end_src - -* Installation Process - -** Enable Developer Debugging & OEM Unlock - -Before we can actually flash anything to the phone, we will need to enable OEM -(Original Equipment Manufacturer) Unlocking, as well as either USB (Universal -Serial Bus) Debugging or Wireless Debugging, depending on which method we will -be using. - -To start, enable developer mode by going to =Settings= > =About= and tapping -=Build Number= seven (7) times. You may need to enter your personal identified -number (PIN) to enable this mode. - -Once developer mode is enabled, go to =Settings= > =System= > =Devloper Options= -and enable OEM Unlocking, as well as USB or Wireless Debugging. In my case, I -chose USB Debugging and performed all actions via USB cable. - -Once these options are enabled, plug the phone into the computer and execute the -following command: - -#+begin_src sh -adb devices -#+end_src - -If an unauthorized error occurs, make sure the USB mode on the phone is changed -from charging to something like "File Transfer" or "PTP" (Picture Transfer -Protocol). You can find the USB mode in the notification tray. - -** Reboot Device - -Once we have found the device via =adb=, we can either boot into the bootloader -interface by holding the volume down button while the phone reboots or by -executing the following command: - -#+begin_src sh -adb reboot bootloader -#+end_src - -** Unlock the Bootloader - -The phone will reboot and load the bootloader screen upon startup. At this -point, we are ready to start the actual flashing of GrapheneOS onto the device. - -*NOTE*: In my situation, I needed to use =sudo= with every =fastboot= command, -but not with =adb= commands. I am not sure if this is standard or a Fedora -quirk, but I'm documenting my commands verbatim in this post. - -First, we start by unlocking the bootloader so that we can load other ROMs: - -#+begin_src sh -sudo fastboot flashing unlock -#+end_src - -** Flashing Factory Images - -Once the phone is unlocked, we can flash it with the =flash-all.sh= script found -inside the =raven-factory-2022091400= folder we entered earlier: - -#+begin_src sh -sudo ./flash-all.sh -#+end_src - -This process should take a few minutes and will print informational messages as -things progress. Avoid doing anything on the phone while this process is -operating. - -** Lock the Bootloader - -If everything was successful, the phone should reboot a few times and finally -land back on the bootloader screen. At this point, we can re-lock the bootloader -to enable full verified boot and protect the device from unwanted flashing or -erasure of data. - -#+begin_src sh -sudo fastboot flashing lock -#+end_src - -Once done, the device will be wiped and ready for a fresh set-up! -#+date: <2022-10-04 Tue 00:00:00> -#+title: How to Mount MTP Mobile Devices on Fedora Linux Using jmtpfs -#+description: Instructions for mounting and accessing Media Transfer Protocol (MTP) compatible mobile devices on Fedora Linux using jmtpfs for file transfer and management. -#+slug: mtp-linux - -I recently ran into trouble attempting to mount my GrapheneOS phone to my laptop -running Fedora Linux via the [[https://en.wikipedia.org/wiki/Media_transfer_protocol][Media Transfer Protocol]] (MTP) and discovered a -simple and effective solution. - -* Use a Universal Serial Bus (USB) 3.0 Port - -First, ensure that the device was plugged in to the laptop through a USB 3.0 -port, if possible. From a brief glance online, it seems that USB 2.0 ports may -cause issues with dropped connections over MTP. This is purely anecdotal since I -don't have any evidence to link showing that USB 2.0 causes issues, but I can -confirm that switching to a USB 3.0 port seemed to cut out most of my issues. - -* Switch USB Preferences to MTP - -Secondly, you need to ensure that the phone's USB preferences/mode is changed to -MTP or File Transfer once the phone is plugged in. Other modes will not allow -you to access the phone's file system. - -* Install =jmtpfs= - -Next, I used the =jmtpfs= package to mount my phone to my laptop. There are -other packages that exist, but this one worked perfectly for me. On Fedora -Linux, you can install it like this: - -#+begin_src sh -sudo dnf install jmtpfs -y -#+end_src - -* Create a Mount Point - -Once you have the package installed, you just need to create a folder for the -device to use as a mount point. In my case, I used =/mnt/pixel=: - -#+begin_src sh -sudo mkdir /mnt/pixel -sudo chown -R $USER:$USER /mnt/pixel -#+end_src - -* Mount & Access the Phone's File System - -Finally, plug-in and mount the device, and you should be able to see all storage -(internal and external) inside your new folder! - -#+begin_src sh -jmtpfs /mnt/pixel -#+end_src - -The output should look something like this: - -#+begin_src sh -Device 0 (VID=18d1 and PID=4ee1) is a Google Inc Nexus/Pixel (MTP). -Android device detected, assigning default bug flags -#+end_src - -Now you are mounted and can do anything you'd like with the device's files: - -#+begin_src sh -cd /mnt/pixel -ls -lha -#+end_src - -From here, you will be able to see any internal or external storage available on -the device: - -#+begin_src sh -total 0 -drwxr-xr-x. 3 user user 0 Jan 1 1970 . -drwxr-xr-x. 1 root root 10 Oct 4 13:29 .. -drwxr-xr-x. 16 user user 0 Apr 21 4426383 'Internal shared storage' -#+end_src -#+date: <2022-10-04 Tue 00:00:00> -#+title: Self-Hosting Guide: Syncthing -#+description: Technical instructions for setting up Syncthing as a peer-to-peer self-hosted file synchronization system that preserves data privacy by eliminating third-party intermediaries. -#+slug: syncthing - -* An Overview of Syncthing - -If you've been looking around the self-hosted cloud storage space for a while, -you've undoubtedly run into someone suggesting [[https://syncthing.net][Syncthing]] as an option. However, -it is an unusual alternative for those users out there who are used to having a -centralized cloud server that serves as the "controller" of the data and -interacts with clients on devices to fetch files. - -This post is a walkthrough of the Syncthing software, how I set up my personal -storage, and some pros and cons of using the software. - -* Installing Syncthing - -To install Syncthing, visit the [[https://syncthing.net/downloads/][Downloads]] page or install via your device's -package manager. - -** Server & Desktop - -You can install Syncthing on servers and desktops via the Downloads page linked -above or via the command-line. - -For Debian-based distros: - -#+begin_src sh -sudo apt install syncthing -#+end_src - -For Fedora-based distros: - -#+begin_src sh -sudo dnf install syncthing -#+end_src - -** Mobile - -Syncthing for Android is available on [[https://f-droid.org/packages/com.nutomic.syncthingandroid/][F-Droid]] and [[https://play.google.com/store/apps/details?id=com.nutomic.syncthingandroid][Google Play]]. Syncthing does -not have an official iOS client, but there is a third-party client called [[https://apps.apple.com/us/app/m%C3%B6bius-sync/id1539203216][Möbius -Sync]]. - -* How Does Syncthing Work? - -To start, I wanted to include the main marketing blurb from their website: - -#+begin_quote -Syncthing is a continuous file synchronization program. It synchronizes -files between two or more computers in real time, safely protected from -prying eyes. Your data is your data alone, and you deserve to choose -where it is stored, whether it is shared with some third party, and how -it's transmitted over the internet. -#+end_quote - -Let's break this apart and add in some other details to help explain what -exactly Syncthing does in order to sync files between devices. - -** Local Syncthing Server(s) - -Syncthing syncs files between multiple devices by creating a local server on -each device. These local servers handle a few different things, such as watching -files and directories for changes, hosting an administrative GUI website, and -authenticating with connected devices. - -You can also start, stop, and restart the Syncthing server via the command-line -or web dashboard. If you're running Syncthing on a device with =systemd=, you -can use the following commands: - -#+begin_src sh -sudo systemctl start [email protected] -sudo systemctl restart [email protected] -sudo systemctl stop [email protected] -#+end_src - -** Syncthing Dashboard - -This biggest part of Syncthing is the admin GUI website that runs on each device -(note that mobile devices will use the Syncthing app rather than the web GUI). -The administrative graphical user interface (GUI) is available through the web -browser on the local device that is running Syncthing - simply go to -=http://localhost:8384= or =http://127.0.0.1:8384=. This web page is the place -where you will change settings, add/modify synced files, and add/modify -connected devices. - -Here's an example web GUI dashboard: - -#+caption: Syncthing Dashboard -#+attr_html: :alt Syncthing web page on macOS, showing folders, device info, and remote devices. -[[https://img.cleberg.net/blog/20221020-syncthing/syncthing_gui.webp]] - -** Remote Devices - -A cloud storage solution wouldn't be very useful if you aren't able to share -data among various devices. Syncthing does this by sharing Device IDs to connect -servers, and then by manually sharing Folders with devices that have been -connected. - -For instance, if you have a laptop running Syncthing and then install the -Syncthing mobile app on a phone, you could scan the laptop's QR (quick-response) -code for Device ID and then accept the authentication on the laptop's dashboard. -Next, you can use either device to select a folder for sharing and dictating -which device should send, receive, or both. - -When you connect devices, you can set one device as an "Introducer," which can -add devices from the introducer to the device list, for mutually shared folders. -You can also configure Auto Accept, compression, rate limits, and more settings -per device. - -* My Personal Cloud Storage Set-up - -Personally, I use a model similar to a traditional cloud storage service. I have -a "centralized" server running 24/7 that acts as an Introducer for my Syncthing -network. I think of this as my main storage and all other devices as tertiary -client devices. I will likely add additional servers as backups as time goes on -so that I don't have to rely on my laptop or phone as the only backups. - -Currently, I have one desktop and one mobile device connected to the network, -both running intermittently as they are not powered-on 24/7. - -The initial set-up of the software was easy enough, but data transfer rates were -incredibly slow for me due to the Wi-Fi. Instead, I plugged my laptop into the -ethernet network that my server is on and manually copied my folders over to the -server with =scp=. Once complete, Syncthing validated that all files were there -and not missing, and it did not need to transfer any data through the WAN. - -As slow as the transfer was going, this probably saved me a few days of waiting -for my ~100 gigabytes to sync. - -* Pros & Cons - -I've put together a short list of pros and cons for Syncthing. I thought about -my experiences with Nextcloud, WebDAV, proprietary services (Google Drive, -iCloud, etc.), and privacy-focused cloud solutions (pCloud, Tresorit, etc.). - -*Pros:* - -- I've faced no data loss at all through my two-month trial run. -- No third-parties store your data on their servers. -- You have full control over your data and can take your data and leave at any - time. -- It's possible to encrypt client-side easily with software like Cryptomator. -- No proprietary clients or mounted volumes, just plain files and folders. - -*Cons:* - -- The learning curve is steeper than traditional cloud services and is focused - on a technical audience. -- If a device needs to modify files in a Folder, the devices will need to sync - ALL files from the folder, which may be large. To avoid size restraints, split - large folders into smaller folders for syncing. -- Syncing can be slow due to the clients/servers initially connecting or - re-connecting after sleeping. -- Multiple personal devices are required and require the user to own or rent - them as no third-party servers are involved in the storage of data. - -Overall, I've had a great experience with Syncthing so far. I've had no data -loss, syncing has been quick and easy when changes are made to files, device -connections are reliable, and I love the freedom of controlling the clients and -servers as I choose. - -Not to mention that I appreciate that I - or someone else - could pull the -Syncthing [[https://github.com/syncthing][source code]] and continue development/support if the Syncthing -Foundation decides to stop developing the software or sells the business. -#+date: <2022-10-22 Sat 00:00:00> -#+title: Alpine Linux Essentials: Installing and Setting Up a Secure Minimal Server -#+description: Detailed procedure for deploying Alpine Linux to achieve a secure, lightweight server environment optimized for web hosting and containerization. -#+slug: alpine-linux - -* Alpine Linux - -[[https://alpinelinux.org][Alpine Linux]] is a very small distribution, built on musl libc and busybox. It -uses ash as the default shell, OpenRC as the init system, and apk as the package -manager. According to their website, an Alpine container "requires no more than -8 megabytes (MB) and a minimal installation to disk requires around 130 MB of -storage." An actual bare metal machine is recommended to have 100 MB of RAM and -0-700 MB of storage space. - -Historically, I've used Ubuntu's minimal installation image as my server OS for -the last five years. Ubuntu worked well and helped as my original server -contained an nVidia GPU (graphics processing unit) and no onboard graphics, so -quite a few distributions won't boot or install without a lot of tinkering. - -Alpine has given me a huge increase in performance across my Docker apps and -Nginx websites. CPU (central processing unit) load for the new server I'm using -to test Alpine hovers around 0-5% on average with an Intel(R) Core(TM) i3-6100 -CPU @ 3.70 Gigahertz (GHz). - -The only services I haven't moved over to Alpine are Plex Media Server and -Syncthing, which may increase CPU load quite a bit depending on how many streams -are running. - -** Installation - -In terms of installation, Alpine has an incredibly useful [[https://wiki.alpinelinux.org/wiki/Installation][wiki]] that will guide a -user throughout the installation and post-installation processes, as well as -various other articles and guides. - -To install Alpine, find an appropriate [[https://alpinelinux.org/downloads/][image to download]] and flash it to a USB -(Universal Serial Bus) using software such as Rufus or Etcher. I opted to use -the Standard image for my x86_{64} architecture. - -Once the USB is ready, plug it into the machine and reboot. Note that you may -have to use a key such as =Esc= or =F1-12= to access the boot menu. The Alpine -Linux terminal will load quickly and for a login. - -To log in to the installation image, use the =root= account; there is no -password. Once logged-in, execute the setup command: - -#+begin_src sh -setup-alpine -#+end_src - -The setup script will ask a series of questions to configure the system. Be sure -to answer carefully or else you may have to re-configure the system after boot. - -- *Keyboard Layout*: Local keyboard language and usage mode, e.g., us and variant - of us-nodeadkeys. -- *Hostname*: The name for the computer. -- *Network*: For example, automatic internet protocol (IP) address discovery - with the Dynamic Host Configuration Protocol (DHCP) protocol. -- *DNS (Domain Name System)*: DNS servers to query. For privacy reasons, it is - NOT recommended to route every local request to servers like Google's - 8.8.8.8. -- *Timezone -- *Proxy*: Proxy server to use for accessing the web. Use =none= for direct - connections to the internet. -- *Mirror*: From where to download packages. Choose the organization you trust - giving your usage patterns to. -- *SSH (Secure Shell Protocol)*: Remote access server. =Openssh= is part of the - default install image. Use =none= to disable remote login, e.g. on laptops. -- *NTP (Network Time Protocol)*: Client used for keeping the system clock in - sync with a time-server. Package =chrony= is part of the default install - image. -- *Disk Mode*: Select between diskless (=none=), =data= or =sys=, as described - above. - -Once the setup script is finished, be sure to reboot the machine and remove the -USB device. - -#+begin_src sh -reboot -#+end_src - -** Post-Installation - -There are many things you can do once your Alpine Linux system is up and -running, and it largely depends on what you'll use the machine for. I'm going to -walk through my personal post-installation setup for my web server. - -1. Upgrade the System - - First, login as =root= in order to update and upgrade the system: - - #+begin_src sh - apk -U upgrade - #+end_src - -2. Adding a User - - I needed to add a user so that I don't need to log in as root. Note that if - you're used to using the =sudo= command, you will now need to use the =doas= - command on Alpine Linux. - - #+begin_src sh - apk add doas - adduser <username> - adduser <username> wheel - #+end_src - - You can now log out and log back in using the newly-created user: - - #+begin_src sh - exit - #+end_src - -3. Enable Community Packages - - In order to install more common packages that aren't found in the =main= - repository, you will need to enable the =community= repository: - - #+begin_src sh - doas nano /etc/apk/repositories - #+end_src - - Uncomment the community line for whichever version of Alpine you're running: - - #+begin_src sh - /media/usb/apks - http://dl-cdn.alpinelinux.org/alpine/v3.16/main - http://dl-cdn.alpinelinux.org/alpine/v3.16/community - #http://dl-cdn.alpinelinux.org/alpine/edge/main - #http://dl-cdn.alpinelinux.org/alpine/edge/community - #http://dl-cdn.alpinelinux.org/alpine/edge/testing - #+end_src - -4. Install Required Packages - - Now that the community packages are available, you can install any packages - you need. In my case, I installed the web server packages I need for my - services: - - #+begin_src sh - doas apk add nano nginx docker docker-compose ufw - #+end_src - -5. SSH - - If you didn't install OpenSSH as part of the installation, you can do so now: - - #+begin_src sh - doas apk add openssh - #+end_src - - Next, either create a new key or copy your SSH key to the server from your - current machines: - - #+begin_src sh - # Create a new key - ssh-keygen - #+end_src - - If you need to copy an existing SSH key from a current machine: - - #+begin_src sh - # Copy key from existing machines - ssh-copy-id <username>@<ip_address> - #+end_src - -6. Firewall - - Lastly, I installed =ufw= above as my firewall. To set up, default to deny - incoming and allow outgoing connections. Then selectively allow other ports - or apps as needed. - - #+begin_src sh - doas ufw default deny incoming - doas ufw default allow outgoing - doas ufw allow SSH - doas ufw allow "WWW Full" - doas ufw allow 9418 # Git server port - #+end_src - -7. Change Hostname - - If you don't like the hostname set during installation, you just need to edit - two files. First, edit the simple hostname file: - - #+begin_src sh - doas nano /etc/hostname - #+end_src - - #+begin_src sh - <hostname> - #+end_src - - Next, edit the =hosts= file: - - #+begin_src sh - doas nano /etc/hosts - #+end_src - - #+begin_src sh - 127.0.0.1 <hostname>.local <hostname> localhost.local localhost - ::1 <hostname> <hostname>.local - #+end_src - -* Nginx Web Server - -To set up my web server, I simply created the =www= user and created the -necessary files. - -#+begin_src sh -doas adduser -D -g 'www' www -mkdir /www -doas mkdir /www -doas chown -R www:www /var/lib/nginx/ -doas chown -R www:www /www -#+end_src - -If you're running a simple webroot, you can alter the main =nginx.conf= file. -Otherwise, you can drop configuration files in the following directory. You -don't need to enable or symlink the configuration file like you do in other -systems. - -#+begin_src sh -doas nano /etc/nginx/http.d/example_website.conf -#+end_src - -Once the configuration is set and pointed at the =/www= directory to serve -files, enable the Nginx service: - -#+begin_src sh -# Note that 'default' must be included or Nginx will not start on boot -doas rc-update add nginx default -#+end_src - -* Docker Containers - -Docker works exactly the same as other systems. Either execute a =docker run= -command or create a =docker-compose.yml= file and do =docker-compose up -d=. - -* Git Server - -I went in-depth on how to self-host a git server in another post: [[https://cleberg.net/blog/git-server.html][Self-Hosting -Guide: Git & cGit]]. - -However, there are a few differences with Alpine. First note that in order to -change the =git= user's shell, you must do a few things a little different: - -#+begin_src sh -doas apk add libuser -doas touch /etc/login.defs -doas mkdir /etc/default -doas touch /etc/default/useradd -doas lchsh git -#+end_src - -* Thoughts on Alpine - -So far, I love Alpine Linux. I have no complaints about anything at this point, -but I'm not completely finished with the migration yet. Once I'm able to upgrade -my hardware to a rack-mounted server, I will migrate Plex and Syncthing over to -Alpine as well - possibly putting Plex into a container or VM. - -The performance is stellar, the =apk= package manager is seamless, and system -administration tasks are effortless. My only regret is that I didn't install -Alpine sooner. -#+date: <2022-10-30 Sun 00:00:00> -#+title: Managing Display Managers in Void Linux: Disable, Enable, and Configure -#+description: Stepwise instructions to manage and replace the display manager on a Void Linux installation, including service control and configuration editing. -#+slug: linux-display-manager - -* Display Manager Services - -In order to change the [[https://en.wikipedia.org/wiki/Display_manager][display manager]] on Void Linux - or any other Linux -distribution - you need to identify the currently enabled display manager. - -** Disabling the Current Display Manager - -Void Linux only has one optical disc image (ISO) available for download with a -pre-built display manager at the time of this post: the XFCE ISO. If you've -installed this version, the pre-assigned display manager is =lxdm=. If you -installed another display manager, replace =lxdm= in the following command with -the display manager you have installed. - -To disable =lxdm=, simply remove the service symlink: - -#+begin_src sh -sudo rm /var/service/lxdm -#+end_src - -** Enabling a New Display Manager - -If you want to enable a new display manager, you can do so after =lxdm= is -disabled. Make sure to replace =<new_display_manager>= with your new DM, such as -=gdm=, =xdm=, etc. - -#+begin_src sh -sudo ln -s /etc/sv/<new_display_manager> /var/service -#+end_src - -* Set Up =.xinitrc= - -Depending on your setup, you may need to create a few X files, such as -=~/.xinitrc=. For my personal set-up, I created this file to launch the i3wm as -my desktop. - -#+begin_src sh -nano ~/.xinitrc -#+end_src - -#+begin_src sh -#!/bin/sh - -exec i3 -#+end_src - -If you run a desktop other than i3, simply replace =i3= with the shell command -that launches that desktop. - -* Set Up Your Shell Profile - -Finally, in order to automatically launch an X session upon login, you will need -to edit the =.bash_profile= (bash) or =.zprofile= (zsh) files for your shell: - -#+begin_src sh -nano ~/.zprofile -#+end_src - -Add the following snippet to the end of the shell profile file. This will -execute the =startx= command upon login. - -#+begin_src sh -if [ -z "${DISPLAY}" ] && [ "${XDG_VTNR}" -eq 1 ]; then - exec startx -fi -#+end_src - -Alternatively, you can ignore this step and simply choose to manually execute -=startx= upon login. This can be useful if you have issues with your desktop or -like to manually launch different desktops by choice. -#+date: <2022-11-07 Mon 00:00:00> -#+title: Self-Hosting Guide: Matrix Synapse -#+description: Systematic guide for deploying Matrix Synapse on Alpine Linux, covering dependency installation, reverse proxy setup, TLS certificate application, and user account management. -#+slug: self-hosting-matrix - -* Synapse - -If you're reading this, you likely know that [[https://github.com/matrix-org/synapse/][Synapse]] is a popular [[https://matrix.org/][Matrix]] home -server software that allows users to run their own Matrix home server. - -This post is a short guide describing how I was able to get Synapse working in a -minimally-usable state on Alpine Linux. - -* Installation Process - -** Dependencies - -First, since there is no Alpine-specific package for Synapse, we need to ensure -that Alpine has the required dependencies for the Python-based installation -method. - -#+begin_src sh -doas apk -U update -doas apk add python3 py3-virtualenv -#+end_src - -Next, we need to set up a Python virtual environment for Synapse: - -#+begin_src sh -mkdir -p ~/synapse && cd ~/synapse -virtualenv -p python3 ~/synapse/env -source ~/synapse/env/bin/activate -pip install --upgrade pip -pip install --upgrade setuptools -pip install matrix-synapse -#+end_src - -** Running Synapse - -Once installed, running Synapse is easy. Simply execute the following command, -replacing =example.com= with the domain name that will be used with this home -server. This will generate the configuration files needed to run the server. - -#+begin_src sh -python -m synapse.app.homeserver \ - --server-name example.com \ - --config-path homeserver.yaml \ - --generate-config \ - --report-stats=no -#+end_src - -Once the configuration is generated, we can start up the Synapse server: - -#+begin_src sh -synctl start -#+end_src - -** Configuring Synapse - -To make any change to Synapse, we need to edit the =YAML= configuration file: - -#+begin_src sh -nano ~/synapse/homeserver.yaml -#+end_src - -For now, we just need to ensure the =server_name= is accurate. However, there -are a lot of other configuration options found in the [[https://matrix-org.github.io/synapse/develop/usage/configuration/config_documentation.html][Configuring Synapse]] -documentation that can be enabled/disabled at any point. - -#+begin_src yaml -server_name: "example.com" -#+end_src - -Make sure to restart Synapse when you make changes to the configuration: - -#+begin_src sh -synctl restart -#+end_src - -** Nginx Reverse-Proxy - -To ensure that Synapse is reachable from the public, we need to connect our -domain to the Synapse server. In my case, I use a Nginx reverse-proxy for this -purpose. - -To use Nginx, we need to create a reverse-proxy configuration file: - -#+begin_src sh -doas nano /etc/nginx/http.d/example.com.conf -#+end_src - -If you already have TLS (Transport Layer Security) certificates for this domain -(=example.com=), you can simply use the SSL (Secure Socket Layer) configuration -and point toward your TLS certificates. - -#+begin_src conf -server { - listen 443 ssl http2; - listen [::]:443 ssl http2; - - # For the federation port - listen 8448 ssl http2; - listen [::]:8448 ssl http2; - - server_name example.com; - - location ~ ^(/_matrix|/_synapse/client) { - # note: do not add a path (even a single /) after the port in `proxy_pass`, - # otherwise nginx will canonicalise the URI and cause signature verification - # errors. - proxy_pass http://localhost:8008; - proxy_set_header X-Forwarded-For $remote_addr; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header Host $host; - - # Nginx by default only allows file uploads up to 1M in size - # Increase client_max_body_size to match max_upload_size defined in homeserver.yaml - client_max_body_size 50M; - } - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - access_log /var/log/nginx/matrix.access.log; -} - -server { - if ($host = example.com) { - return 301 https://$host$request_uri; - } - - server_name example.com; - listen 80; - return 404; -} -#+end_src - -If you need to generate TLS certificates (I recommend [[https://certbot.eff.org/][Certbot]]), you'll need a -more minimal Nginx conf file before you can use the TLS-enabled example above. -Instead, use this configuration file during the Certbot certificate generation -process: - -#+begin_src conf -server { - server_name example.com; - location / { - try_files $uri $uri/ =404; - } - listen 80; -} -#+end_src - -Once you're done editing the Nginx conf file, restart Nginx: - -#+begin_src sh -doas rc-service nginx restart -#+end_src - -If you still need to generate TLS certificates, run =certbot= now and obtain the -certificates. Certbot will ask if you want to use a webroot or spin up a -temporary web server. I *highly* recommend using the temporary web server due to -the many issues with using a webroot. - -You will need to stop Nginx in order to user the temporary web server option -with Certbot: - -#+begin_src sh -# Stop Nginx so certbot can spin up a temp webserver for cert generation -doas rc-service nginx stop -doas certbot certonly -v -doas rc-service nginx start -#+end_src - -** Open Firewall & Router Ports - -If you use a firewall on the server, open the =8448= port for discovery and -federation, as well as the normal web server ports if you're using a reverse -proxy. If you want additional services, such as voice calls, you will need to -read the Synapse documentation to see which ports need to be opened for those -features. - -Here's an example of the Universal Firewall (UFW) software: - -#+begin_src sh -# Matrix port -doas ufw allow 8448 -# Standard web server ports -doas ufw allow "Nginx Full" -#+end_src - -Remember to forward any Synapse ports, such as =8448=, =80=, and =443=, in your -Router from the internet to your server's internet protocol (IP) address. - -** Adding Matrix Users - -Finally, if you didn't enable public registration in the =homeserver.yaml= file, -you can manually create users via the command-line: - -#+begin_src sh -cd ~/synapse -register_new_matrix_user -c homeserver.yaml -#+end_src - -Remember that the format for federated Matrix usernames is -=@username:example.com= when logging in to client applications. - -Once Synapse is running, and you have a username, you are ready to log in to a -Matrix client and start sending messages, joining rooms, and utilizing your very -own Matrix server. -#+date: <2022-11-11 Fri 00:00:00> -#+title: Troubleshooting and Fixing Nginx Permission Denied Errors on /var/lib/nginx -#+description: Step-by-step remediation for addressing permission denied errors encountered by Nginx in the /var/lib/nginx directory to restore temporary file caching functionality. -#+slug: nginx-tmp-errors - -/This is a brief post so that I personally remember the solution as it -has occurred multiple times for me./ - -* The Problem - -After migrating to a new server operating system (OS), I started receiving quite -a few permission errors like the one below. These popped up for various -different websites I'm serving via Nginx on this server, but did not prevent the -website from loading. - -I found the errors in the standard log file: - -#+begin_src sh -cat /var/log/nginx/error.log -#+end_src - -#+begin_src sh -2022/11/11 11:30:34 [crit] 8970#8970: *10 open() "/var/lib/nginx/tmp/proxy/3/00/0000000003" failed (13: Permission denied) while reading upstream, client: 169.150.203.10, server: cyberchef.example.com, request: "GET /assets/main.css HTTP/2.0", upstream: "http://127.0.0.1:8111/assets/main.css", host: "cyberchef.example.com", referrer: "https://cyberchef.example.com/" -#+end_src - -You can see that the error is =13: Permission denied= and it occurs in the -=/var/lib/nginx/tmp/= directory. In my case, I had thousands of errors where -Nginx was denied permission to read/write files in this directory. - -So how do I fix it? - -* The Solution - -In order to resolve the issue, I had to ensure the =/var/lib/nginx= directory is -owned by Nginx. Mine was owned by the =www= user and Nginx was not able to read -or write files within that directory. This prevented Nginx from caching -temporary files. - -#+begin_src sh -# Alpine Linux -doas chown -R nginx:nginx /var/lib/nginx - -# Other Distros -sudo chown -R nginx:nginx /var/lib/nginx -#+end_src - -You /may/ also be able to change the =proxy_temp_path= in your Nginx config, but -I did not try this. Here's a suggestion I found online that may work if the -above solution does not: - -#+begin_src sh -nano /etc/nginx/http.d/example.com.conf -#+end_src - -#+begin_src conf -server { - ... - - # Set the proxy_temp_path to your preference, make sure it's owned by the - # `nginx` user - proxy_temp_path /tmp; - - ... -} -#+end_src - -Finally, restart Nginx and your server should be able to cache temporary files -again. - -#+begin_src sh -# Alpine Linux (OpenRC) -doas rc-service nginx restart - -# Other Distros (systemd) -sudo systemctl restart nginx -#+end_src -#+date: <2022-11-27 Sun 00:00:00> -#+title: Building a High-Performance Rack-Mounted Server with Consumer PC Components -#+description: Detailed instructions on selecting components, assembling, and configuring a rack-mounted server suitable for advanced computing tasks in a professional or laboratory setting. -#+slug: server-build - -* The Dilemma - -For years, I have been using desktops and a Raspberry Pi as the backbone of my -homelab. I have always wanted to move toward a single dedicated server that -could handle all of my tasks, but was often put off by the complexity of the -choices (and financial roadblocks at some times). - -However, after purchasing a small server rack this past year, I have been -researching to see what kind of rack-mounted server I could buy. I initially -bought a Dell R720XD loaded up with everything I could ever want in a server - -but I did not care for it. It was far too loud, and the age of the CPU/RAM was -something I wanted to improve upon. - -After returning the R720XD, I decided that I wanted to build my own server with -modern, consumer-grade PC components. This time, I am very happy with the -results of my server. - -* Components - -I'll start by listing all the components I used for this server build: - -- *Case*: [[https://www.rosewill.com/rosewill-rsv-r4100u-black/p/9SIA072GJ92825][Rosewill RSV-R4100U 4U Server Chassis Rackmount Case]] -- *Motherboard*: [[https://nzxt.com/product/n7-b550][NZXT B550]] -- *CPU*: AMD Ryzen 7 5700G with Radeon Graphics -- *GPU*: N/A - I specifically chose one of the few AMD CPUs that support onboard - graphics. -- *RAM*: 64GB RAM (2x32GB) /Max of 128GB RAM on this motherboard/ -- *Boot Drive*: Western Digital 500GB M.2 NVME SSD -- *HDD Bay*: - - 10TB WD White /(shucked, moved from previous server)/ - - 8TB WD White /(shucked, moved from previous server)/ - - 2 x 8TB WD Red Plus /(Black Friday lined up perfectly with this build, so I - grabbed two of these)/ -- *PSU*: Corsair RM850 PSU -- *Extras*: - - Corsair TM3Q Thermal Paste - - Noctua 120mm fan /(replacement for front case fan)/ - - 2 x Noctua 80mm fans /(replacement for rear case fans)/ - - CableMatters 6Gbps SATA Cables - -* Building the Server - -This took quite a while for me to build (in my opinion of time), totaling around -3 hours from start to finish. The case has some peculiar construction, so you -have to completely remove the ODD & HDD cages to install the motherboard and -other components first. - -Now, I've never built a computer of any kind before, so I was quite nervous. -Personally, the only challenging part was getting the CPU cooler to screw into -the motherboard without sliding the thermal paste around too much underneath. -I'm still not entirely sure if I did a great job of it, but nothing's broken -yet. - -The main components were all fine and simple. However, installing the hard -drives is slightly tedious as I need to power off the server and completely -unscrew the HDD cage to install or remove any drives. Additionally, the drives -are screwed directly into the metal cage with small screws, which are quite a -bit different from the HDD trays I'm used to in other machines. - -Seeing that the cases with hot-swap bays were 3-4x the price, I'm okay dealing -with the tedium of removing the cage to install new drives. - -* Software - -I'm not going to dive into the software as I have done so in other recent posts. -However, I wanted to note that I am using Alpine Linux on this server and -hosting most services inside Docker. No virtual machines (VMs) and very few -bare-metal services. - -* The Results - -How did my build turn out? Well, after migrating my other servers and their -services over, I found that my server is blazing fast. The heaviest of my -applications, Plex, is handled with ease. Even 4k streaming seems to be -effortless. - -I am very happy with the results and will likely continue to improve on this -server as the years go by rather than buying another used server online. - -** Mistakes I Made - -This post wouldn't be complete unless I wrote about the mistakes I made while -building. The only real mistake I made beyond a "whoops I dropped a screw" -related to airflow and fan direction. - -While installing the two new hard drives that showed up on 2022-11-30 and -getting ready to install the case in my rack, I noticed that the hard drive -temperatures were quite high. - -I used the =smartctl= command for each of my drives (=/dev/sda= through -=/dev/sdd=): - -#+begin_src sh -doas smartctl -a /dev/sda | grep Temperature_Celsius -#+end_src - -The results were unusual - all four drives were idling at ~44-46 degrees -Celsius. The only drive that was cooler was my 10TB drive, which was at 38 -degrees Celsius. I noted that this 10TB drive was also closest to the case fan. - -#+begin_src sh -ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE -# /dev/sda -194 Temperature_Celsius 0x0002 147 147 000 Old_age Always - 44 (Min/Max 22/46) -# /dev/sdb -194 Temperature_Celsius 0x0002 141 141 000 Old_age Always - 46 (Min/Max 21/48) -# /dev/sdc -194 Temperature_Celsius 0x0002 144 144 000 Old_age Always - 45 (Min/Max 19/61) -# /dev/sdd -194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 38 (Min/Max 14/56) -#+end_src - -After looking to see if I could fit more fans into the case, I noticed that the -120mm fan used for intake from the front of the case was actually pushing air -out of the case by mistake. This fan sits right in front of the hard drive bay. - -Once I flipped the fan around to act as an intake fan, the temperatures dropped -immediately! They are now idling at ~31-33 degrees Celsius. A single fan -spinning the wrong way caused my drives to idle 10-15 degrees higher than they -should have. - -#+begin_src sh -ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE -# /dev/sda -194 Temperature_Celsius 0x0002 209 209 000 Old_age Always - 31 (Min/Max 14/56) -# /dev/sdb -194 Temperature_Celsius 0x0002 196 196 000 Old_age Always - 33 (Min/Max 19/61) -# /dev/sdc -194 Temperature_Celsius 0x0002 203 203 000 Old_age Always - 32 (Min/Max 21/48) -# /dev/sdd -194 Temperature_Celsius 0x0002 196 196 000 Old_age Always - 33 (Min/Max 22/46) -#+end_src - -This was a silly error to make, but I'm glad I found it today before I screwed -the case into the rack and made things a lot more tedious to fix. -#+date: <2022-11-29 Tue 00:00:00> -#+title: How to Block Unwanted HTTP Referrers in Nginx Using a Ban List -#+description: Technical guide to implementing a referrer ban list in Nginx configurations to prevent access from undesired domains and improve web server security. -#+slug: nginx-referrer-ban-list - -* Creating the Ban List - -In order to ban list referral domains or websites with Nginx, you need to create -a ban list file. The file below will accept regexes for different domains or -websites you wish to block. - -First, create the file in your nginx directory: - -#+begin_src sh -doas nano /etc/nginx/banlist.conf -#+end_src - -Next, paste the following contents in and fill out the regexes with whichever -domains you're blocking. - -#+begin_src conf -# /etc/nginx/banlist.conf - -map $http_referer $bad_referer { - hostnames; - - default 0; - - # Put regexes for undesired referrers here - "~news.ycombinator.com" 1; -} -#+end_src - -* Configuring Nginx - -In order for the ban list to work, Nginx needs to know it exists and how to -handle it. For this, edit the =nginx.conf= file. - -#+begin_src sh -doas nano /etc/nginx/nginx.conf -#+end_src - -Within this file, find the =http= block and add your ban list file location to -the end of the block. - -#+begin_src conf -# /etc/nginx/nginx.conf - -http { - ... - - # Include ban list - include /etc/nginx/banlist.conf; -} -#+end_src - -* Enabling the Ban List - -Finally, we need to take action when a bad referral site is found. To do so, -edit the configuration file for your website. For example, I have all website -configuration files in the =http.d= directory. You may have them in the -=sites-available= directory on some distributions. - -#+begin_src sh -doas nano /etc/nginx/http.d/example.com.conf -#+end_src - -Within each website's configuration file, edit the =server= blocks that are -listening to ports 80 and 443 and create a check for the =$bad_referrer= -variable we created in the ban list file. - -If a matching site is found, you can return any [[https://en.wikipedia.org/wiki/List_of_HTTP_status_codes][HTTP Status Code]] you want. Code -403 (Forbidden) is logical in this case since you are preventing a client -connection due to a banned domain. - -#+begin_src conf -server { - ... - - # If a referral site is banned, return an error - if ($bad_referer) { - return 403; - } - - ... -} -#+end_src - -* Restart Nginx - -Lastly, restart Nginx to enable all changes made. - -#+begin_src sh -doas rc-service nginx restart -#+end_src - -* Testing Results - -In order to test the results, let's curl the contents of our site. To start, -I'll curl the site normally: - -#+begin_src sh -curl https://cleberg.net -#+end_src - -The HTML contents of the page come back successfully: - -#+begin_src html -<!doctype html>...</html> -#+end_src - -Next, let's include a banned referrer: - -#+begin_src sh -curl --referer https://news.ycombinator.com https://cleberg.net -#+end_src - -This time, I'm met with a 403 Forbidden response page. That means we are -successful and any clients being referred from a banned domain will be met with -this same response code. - -#+begin_src html -<html> - <head> - <title>403 Forbidden</title> - </head> - <body> - <center><h1>403 Forbidden</h1></center> - <hr /> - <center>nginx</center> - </body> -</html> -#+end_src -#+date: <2022-12-01 Thu 00:00:00> -#+title: Optimizing Nginx with GZIP: A Step-by-Step Guide to Text Compression -#+description: Procedures for activating and configuring GZIP compression in Nginx to decrease data transmission size, reduce bandwidth consumption, and accelerate page load times. -#+slug: nginx-compression - -* Text Compression - -Text compression allows a web server to serve text-based resources faster than -uncompressed data. This can speed up things like First Contentful Paint, Tie to -Interactive, and Speed Index. - -* Enable Nginx Compression with gzip - -In order to enable text compression on Nginx, we need to enable it within the -configuration file: - -#+begin_src sh -nano /etc/nginx/nginx.conf -#+end_src - -Within the =http= block, find the section that shows something like the block -below. This is the default gzip configuration I found in my =nginx.conf= file on -Alpine Linux 3.17. Yours may look slightly different, just make sure that you're -not creating any duplicate gzip options. - -#+begin_src conf -# Enable gzipping of responses. -#gzip on; - -# Set the Vary HTTP header as defined in the RFC 2616. Default is 'off'. -gzip_vary on; -#+end_src - -Remove the default gzip lines and replace them with the following: - -#+begin_src conf -# Enable gzipping of responses. -gzip on; -gzip_vary on; -gzip_min_length 10240; -gzip_proxied expired no-cache no-store private auth; -gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; -gzip_disable "MSIE [1-6]"; -#+end_src - -* Explanations of ngx_{httpgzipmodule} Options - -Each of the lines above enables a different aspect of the gzip response for -Nginx. Here are the full explanations: - -- =gzip=: Enables or disables gzipping of responses. -- =gzip_vary=: Enables or disables inserting the "Vary: Accept-Encoding" - response header field if the directives gzip, gzip_{static}, or gunzip are - active. -- =gzip_min_length=: Sets the minimum length of a response that will be - gzipped. The length is determined only from the "Content-Length" response - header field. -- =gzip_proxied=: Enables or disables gzipping of responses for proxied - requests depending on the request and response. The fact that the request is - proxied is determined by the presence of the "Via" request header field. -- =gzip_types=: Enables gzipping of responses for the specified MIME types in - addition to "text/html". The special value "*" matches any MIME type (0.8.29). - Responses with the "text/html" type are always compressed. -- =gzip_disable=: Disables gzipping of responses for requests with - "User-Agent" header fields matching any of the specified regular expressions. - - The special mask "msie6" (0.7.12) corresponds to the regular expression - "MSIE [4-6].", but works faster. Starting from version 0.8.11, "MSIE 6.0; - ... SV1" is excluded from this mask. - -More information on these directives and their options can be found on the -[[https://nginx.org/en/docs/http/ngx_http_gzip_module.html][Module ngx_{httpgzipmodule}]] page in Nginx's documentation. -#+date: <2022-12-07 Wed 00:00:00> -#+title: Nginx Wildcard Redirects: Seamlessly Redirecting Domains and Subdomains with Trailing Paths -#+description: Instructional steps for applying regex-based redirects in Nginx to manage subdomain routing and trailing path modifications effectively. -#+slug: nginx-wildcard-redirect - -* Problem - -I recently migrated domains and replaced the old webpage with a simple info page -with instructions to users on how to edit their bookmarks and URLs to get to the -page they were seeking. - -This was not ideal as it left the work up to the user and may have caused -friction for users who accessed my RSS (Really Simple Syndication) feed. - -* Solution - -Instead, I finally found a solution that allows me to redirect both subdomains -AND trailing content. For example, both of these URLs now redirect properly -using the logic I'll explain below: - -#+begin_src txt -# Example 1 - Simple base domain redirect with trailing content -https://domain1.com/blog/alpine-linux/ -> https://domain2.com/blog/alpine-linux/ - -# Example 2 - Complex redirect with both a subdomain and trailing content -https://libreddit.domain1.com/r/history/comments/7z8cbg/new_discovery_mode_turns_video_game_assassins/ --> -https://libreddit.domain2.com/r/history/comments/7z8cbg/new_discovery_mode_turns_video_game_assassins/ -#+end_src - -Go ahead, try the URLs (uniform resource locators) if you want to test them. - -** Nginx Config - -To make this possible. I needed to configure a proper redirect scheme in my -Nginx configuration. - -#+begin_src sh -doas nano /etc/nginx/http.d/domain1.conf -#+end_src - -Within this file, I had one block configured to redirect HTTP requests to HTTPS -for the base domain and all subdomains. - -#+begin_src conf -server { - listen [::]:80; - listen 80; - server_name domain1.com *.domain1.com; - - if ($host = domain1.com) { - return 301 https://$host$request_uri; - } - - if ($host = *.domain1.com) { - return 301 https://$host$request_uri; - } - - return 404; -} -#+end_src - -For the base domain, I have another =server= block dedicated to redirecting all -base domain requests. You can see that the =rewrite= line is instructing Nginx -to gather all trailing content and append it to the new =domain2.com= URL. - -#+begin_src conf -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - - server_name domain1.com; - - rewrite ^/(.*)$ https://domain2.com/$1 permanent; - - ssl_certificate /etc/letsencrypt/live/domain1.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/domain1.com/privkey.pem; -} -#+end_src - -Finally, the tricky part is figuring out how to tell Nginx to redirect while -keeping both a subdomain and trailing content intact. I found that the easiest -way to do this is to give it a =server= block of its own. - -Within this block, we need to do some regex on the =server_name= line before we -can rewrite anything. This creates a variable called =subdomain=. - -Once the server gets to the =rewrite= line, it pulls the =subdomain= variable -from above and uses it on the new =domain2.com= domain before appending the -trailing content (=$request_uri=). - -#+begin_src conf -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - - server_name ~^(?<subdomain>\w+)\.domain1\.com$; - - rewrite ^ https://$subdomain.domain2.com$request_uri permanent; - - ssl_certificate /etc/letsencrypt/live/domain1.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/domain1.com/privkey.pem; -} -#+end_src - -That's all there is to it. With this, I simply restarted Nginx and watched the -redirections work in-action. - -#+begin_src sh -doas rc-service nginx restart -#+end_src - -Looking back on it, I wish I had done this sooner. Who knows how many people -went looking for my sites or bookmarks and gave up when they saw the redirect -instructions page. - -Oh well, it's done now. Live and learn. -#+date: <2022-12-17 Sat 00:00:00> -#+title: Installing and Customizing the suckless Simple Terminal (st) on Fedora Linux -#+description: Comprehensive instructions to obtain source code, compile, apply patches, and install the Simple Terminal application on Fedora Linux systems. -#+slug: st - -* st - -[[https://st.suckless.org][st]] standards for Simple Terminal, a simple terminal implementation for X made by -the [[https://suckless.org][suckless]] team. - -This post walks through the dependencies needed and process to build and install -=st= on Fedora Workstation. - -** Obtain Files - -To start, obtain the source files for =st= via =git clone=. - -#+begin_src sh -mkdir ~/suckless && cd ~/suckless -git clone https://git.suckless.org/st && cd st -#+end_src - -** Dependencies - -Once you have the files and are in the =st= directory, ensure the following -packages are installed. - -#+begin_src sh -sudo dnf update && sudo dnf upgrade -sudo dnf install gcc patch libX11-devel libXft-devel -#+end_src - -** Building - -Before building, ensure that you read the README file. - -#+begin_src sh -cat README -#+end_src - -Once you've read the instructions, open the =config.mk= file and ensure it -matches your setup. If you're not sure, leave the default options within the -file. - -Finally, you can build =st= with the following command. Ensure you run as root -(e.g., =sudo=) or else you may not end up with a usable application file. - -#+begin_src sh -sudo make clean install -#+end_src - -** Customization (Patches) - -Note that customizing =st= requires you to modify the source files or to -download one of the [[https://st.suckless.org/patches/][available patches]] for suckless.org. - -If you've already installed =st= and want to customize or install a patch, start -by uninstalling the current program. - -#+begin_src sh -cd ~/suckless/st -sudo make uninstall -#+end_src - -Next, grab the =<path>.diff= file from the page of the patch you chose. For -example, I will be using the [[https://st.suckless.org/patches/defaultfontsize/][defaultfontsize]] patch in the below example. - -#+begin_src sh -wget https://st.suckless.org/patches/defaultfontsize/st-defaultfontsize-20210225-4ef0cbd.diff -#+end_src - -Once the file is downloaded inside the =st= folder, apply the patch and -re-install the program. You may need to install the =patch= command if you don't -have it installed already (you should have installed it above). - -#+begin_src sh -patch -i st-defaultfontsize-20210225-4ef0cbd.diff -sudo make clean install -#+end_src - -Once installed, you can use the default font size patch to launch =st= with any -font size you wish: - -#+begin_src sh -st -z 16 -#+end_src -#+date: <2022-12-23 Fri 00:00:00> -#+title: How to Set Up Alpine Linux as a Desktop OS with Sway -#+description: Stepwise procedures for installing and setting up Alpine Linux as a desktop operating system, including window manager setup and relevant system adjustments. -#+slug: alpine-desktop - -* Isn't Alpine Linux for Servers? - -This is a question I see a lot when people are presented with an example of -Alpine Linux running as a desktop operating system (OS). - -While Alpine is small, fast, and minimal, that doesn't stop it from functioning -at a productive level for desktop users. - -This post is documentation of how I installed and modified Alpine Linux to -become my daily desktop OS. - -* Installation - -Note that I cover the installation of Alpine Linux in my other post, so I won't -repeat it here: [[https://cleberg.net/blog/alpine-linux.html][Alpine Linux Essentials: Installing and Setting Up a Secure -Minimal Server]]. - -Basically, get a bootable USB (Universal Serial Bus) device or whatever you -prefer with Alpine on it, boot the optical disc image (ISO), and run the setup -script. - -#+begin_src sh -setup-alpine -#+end_src - -Once you have gone through all the options and installer finishes without -errors, reboot. - -#+begin_src sh -reboot -#+end_src - -* Initial Setup - -Once Alpine is installed and the machine has rebooted, login is as root -initially or =su= to root once you log in as your user. From here, you should -start by updating and upgrading the system in case the ISO was not fully -up-to-date. - -#+begin_src sh -# Update and upgrade system -apk -U update && apk -U upgrade - -# Add an editor so we can enable the community repository -apk add nano -#+end_src - -You need to uncomment the =community= repository for your version of Alpine -Linux. - -For v3.17, the =repositories= file should look like this: - -#+begin_src sh -nano /etc/apk/repositories -#+end_src - -#+begin_src conf -#/media/sda/apks -http://mirrors.gigenet.com/alpinelinux/v3.17/main -http://mirrors.gigenet.com/alpinelinux/v3.17/community -#http://mirrors.gigenet.com/alpinelinux/edge/main -#http://mirrors.gigenet.com/alpinelinux/edge/community -#http://mirrors.gigenet.com/alpinelinux/edge/testing -#+end_src - -#+begin_src sh -# Add the rest of your packages -apk add linux-firmware iwd doas git curl wget - -# Add yourself to the wheel group so you can use the doas command -adduser $USER wheel -#+end_src - -* Window Manager (Desktop) - -The [[https://wiki.alpinelinux.org/wiki/Sway][Sway installation guide]] has everything you need to get Sway working on -Alpine. - -However, I'll include a brief list of the commands I ran and their purpose for -posterity here. - -#+begin_src sh -# Add eudev and set it up -apk add eudev -setup-devd udev - -# Since I have Radeon graphics, I need the following packages -apk add mesa-dri-gallium mesa-va-gallium - -# Add user to applicable groups -adduser $USER input -adduser $USER video - -# Add a font package -apk add ttf-dejavu - -# Add the seatd daemon -apk add seatd -rc-update add seatd -rc-service seatd start - -# Add user to seat group -adduser $USER seat - -# Add elogind -apk add elogind polkit-elogind -rc-update add elogind -rc-service elogind start - -# Finally, add sway and dependencies -apk add sway sway-doc -apk add \ # Install optional dependencies: - xwayland \ # recommended for compatibility reasons - foot \ # default terminal emulator - bemenu \ # wayland menu - swaylock swaylockd \ # lockscreen tool - swaybg \ # wallpaper daemon - swayidle # idle management (DPMS) daemon -#+end_src - -Once you have the packages installed and set-up, you need to export the -=XDG_RUNTIME_DIR= upon login. To do this, edit your =.profile= file. - -If you use another shell, such as =zsh=, you need to edit that shell's profile -(e.g., =~/.zprofile=)! - -#+begin_src sh -nano ~/.profile -#+end_src - -Within the file, paste this: - -#+begin_src sh -if test -z "${XDG_RUNTIME_DIR}"; then - export XDG_RUNTIME_DIR=/tmp/$(id -u)-runtime-dir - if ! test -d "${XDG_RUNTIME_DIR}"; then - mkdir "${XDG_RUNTIME_DIR}" - chmod 0700 "${XDG_RUNTIME_DIR}" - fi -fi -#+end_src - -Once that's complete, you can launch Sway manually. - -#+begin_src sh -dbus-run-session -- sway -#+end_src - -** Personal Touches - -I also added the following packages, per my personal preferences and situation. - -#+begin_src sh -doas apk add brightnessctl \ # Brightness controller - zsh \ # Shell - firefox \ # Browser - syncthing \ # File sync service - wireguard-tools \ # Wireguard VPN - gomuks \ # CLI Matrix client - neomutt \ # CLI email client - thunderbird \ # GUI email client - gnupg # GPG key manager -#+end_src - -From here, I use my Syncthing storage to pull all the configuration files I -stored from prior desktops, such as my [[https://github.com/ccleberg/dotfiles.git][dotfiles]]. - -* Resolving Issues - -** WiFi Issues - -I initially tried to set up my Wi-Fi the standard way with =iwd=, but it didn't -work. - -Here is what I initially tried (I did all of this as =root=): - -#+begin_src sh -apk add iwd -rc-service iwd start -iwctl station wlan0 connect <SSID> # This will prompt for the password -rc-update add iwd boot && rc-update add dbus boot -#+end_src - -Then, I added the Wi-Fi entry to the bottom of the networking interface file: - -#+begin_src sh -nano /etc/network/interfaces -#+end_src - -#+begin_src conf -auto wlan0 -iface wlan0 inet dhcp -#+end_src - -Finally, restart the networking service: - -#+begin_src sh -rc-service networking restart -#+end_src - -My Wi-Fi interface would receive an internet protocol (IP) address from the -router, but it could not ping anything in the network. To solve the Wi-Fi -issues, I originally upgraded to Alpine's =edge= repositories, which was -unnecessary. - -Really, the solution was to enable the =NameResolvingService=resolvconf= in -=/etc/iwd/main.conf=. - -#+begin_src sh -doas nano /etc/iwd/main.conf -#+end_src - -#+begin_src conf -[Network] - -NameResolvingService=resolvconf -#+end_src - -Once I finished this process, my Wi-Fi is working flawlessly. - -** Sound Issues - -Same as with the Wi-Fi, I had no sound and could not control the mute/unmute or -volume buttons on my laptop. - -To resolve this, I installed [[https://wiki.alpinelinux.org/wiki/PipeWire][pipewire]]. - -#+begin_src sh -# Add your user to the following groups -addgroup $USER audio -addgroup $USER video - -# Install pipewire and other useful packages -apk add pipewire wireplumber pipewire-pulse pipewire-jack pipewire-alsa -#+end_src - -Finally, I needed to add =/usr/libexec/pipewire-launcher= to my -=.config/sway/config= file so that Pipewire would run every time I launched -sway. - -#+begin_src sh -nano ~/.config/sway/config -#+end_src - -#+begin_src conf -# Run pipewire audio server -exec /usr/libexec/pipewire-launcher - -# Example audio button controls -bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5% -bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -5% -bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle -bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle -#+end_src - -Note that I do not use bluetooth or screen sharing, so I won't cover those -options in this post. - -Other than these issues, I have a working Alpine desktop. No other complaints -thus far! -#+date: <2023-01-03 Tue 00:00:00> -#+title: 2023 Website Updates: Minimalist Style, Accessibility Improvements, and Content Prioritization -#+description: Documentation of significant changes applied to site design, layout, and accessibility features to enhance navigability and content clarity. -#+slug: recent-website-changes - -* The State of This Website - -Over the years, this website has changed URLs, styles, content focus, -and much more. However, it seems that I am never done, as I am yet again -changing this page to fit my current needs and wants. - -While this site was already minimal (~12kb), it contained a lot of -disorganized content and some poorly chosen color schemes. - -The recent updates attempt to fix these items while focusing on what I -truly care about here: the content within each page. - -* Recent Changes - -I've made quite a few changes to the style of this website today, both -in the CSS and in the HTML. - -Here are some of the key takeaways from today's changes: - -1. Reduce the width of the website from =60em= to =40em=. -2. Remove breadcrumb navigation and replaced with a simple "Return Home" - link when visiting anything other than the homepage. -3. Remove syntax highlighting from code blocks. CSS now loads from a - single file. -4. Move blog posts on the homepage to the top, pushing tertiary content - down. -5. Update font-family from =monospace= to =sans-serif= for readability. - -* Future Focus - -** Accessibility - -My main focus amidst all the changes this past year was accessibility. I -tried to improve the accessibility of all pages on this site as well as -I know how. For example, I added aria labels to identify different -navigation menus in November. - -I want to continue this in 2023 and learn more about the accessibility -features I can utilize to help those who may need them. - -** Content First - -Beyond accessibility, I am making a concerted effort to bring the -content of this site to the forefront and push the tertiary information -(e.g., About Me, Services, etc.) down below the content. - -Further, I want to review and edit previous blog posts for grammar, -accuracy, dead links, and more. Where necessary, I may even add a blurb -at the top of old posts that are no longer accurate or helpful. - -** Style - -As always, I will be searching for ways to reduce distractions and bring -a minimalistic approach to this site. While there are certainly more -drastic measures I could take, such as making this a -[[https://shinobi.bt.ht][Shinobi Website]] or a [[https://nocss.club][No -CSS Website]], I prefer to keep some modern features here. - -Two ideas have been floating around in my head, but I am not sure how I -feel about these approaches yet: - -1. Going all-in with Emacs org-mode and creating a script to - auto-publish all my blog posts from org-mode to plain HTML files and - then letting my CSS style it after the fact. -2. Focus on publishing for Gemini or Gopher and then utilize a - conversion program to translate the pages to HTML. - -* Looking Back - -As I sit here and finalize the changes, as well as this post, I am happy -with the current state of this website. It's certainly a long way from -my first attempts (parallax background images, anyone?) and it's good to -see the progress. - -I can only hope and work hard to ensure that I make more meaningful -progress by this time next year. -#+date: <2023-01-05 Thu 00:00:00> -#+title: How to Quickly Remove All Likes on Tumblr Desktop -#+description: Instructions for executing a JavaScript script to automate the mass unlike operation for Tumblr posts without requiring additional software. -#+slug: mass-unlike-tumblr-posts - -* The Dilemma - -The dilemma I had was pretty simple: I wanted to unlike all the posts I -have liked on Tumblr so that I could follow a new focus on blogs and -start fresh. Otherwise, Tumblr will keep recommending content based on -your previous likes. - -* The Solution - -I searched the web for a while and noted that most solutions referenced -Tumblr setting and dashboard pages that no longer exist. Additionally, I -did not want to install a third party extension to do this, as some -suggested. - -Luckily, I used Javascript for a while a few years ago and figured it -would be easy enough to script a solution, as long as Tumblr had a -system for the unlike buttons. - -** Identifying Unlike Buttons - -Tumblr's unlike buttons are structured as you can see in the following -code block. All unlike buttons have an =aria-label= with a value of -=Unlike=. - -#+begin_src html -<button class="TRX6J" aria-label="Unlike"> - <span class="EvhBA B1Z5w ztpfZ" tabindex="-1"> - <svg - xmlns="http://www.w3.org/2000/svg" - height="21" - width="23" - role="presentation" - > - <use href="#managed-icon__like-filled"></use> - </svg> - </span> -</button> -#+end_src - -** Running a Script to Unlike All Likes - -To run this script, you will need to load the -[[https://www.tumblr.com/likes][Likes | Tumblr]] page while logged in to -your account. - -Further, be sure to scroll down to the bottom and force Tumblr to load -more posts so that this script unlikes more posts at a time. - -Once you are logged in and the page is loaded, open the Developer Tools -and be sure you're on the "Console" tab. It should look something like -this (this is in Firefox, Chromium should be similar): - -#+caption: Firefox Dev Tools -#+attr_html: :alt Firefox Dev Tools' Console tab will allow you to paste this command. -[[https:///img.cleberg.net/blog/20230105-mass-unlike-tumblr-posts/dev_console.webp]] - -All you need to do is paste the following snippet into the dev console. -This code will collect all unlike buttons (=elements=) and then click -each button to unlike it. - -Optionally, you can comment-out the line =elements[i].click();= and -uncomment the =console.log()= lines to simply print out information -without performing any actions. This can be useful to debug issues or -confirm that the code below isn't doing anything you don't want it to. - -#+begin_src javascript -const elements = document.querySelectorAll('[aria-label="Unlike"]'); -// console.log(elements); // 👉 [button] - -for (let i = 0; i < elements.length; i++) { - // console.log(elements[i]); - elements[i].click(); -} -#+end_src - -* Results - -The results were quick for my situation, as it unliked ~200 posts within -2-3 seconds. I am not sure how this will perform on larger sets of likes -(or if Tumblr has a limit to unliking posts). - -You can see the below screenshot showing that I pasted the snippet into -the console, pressed Enter, and then the posts are automatically -unliked. - -#+caption: Script Results -#+attr_html: :alt The script will return "undefined" when run in the console. -[[https://img.cleberg.net/blog/20230105-mass-unlike-tumblr-posts/script_results.webp]] - -Thinking about this further, I would bet that this would be fairly -simple to package into a browser add-on so that users could install the -add-on, go to their Likes page, and click a button to run the script. -Food for thought. -#+date: <2023-01-08 Sun 00:00:00> -#+title: How to Remove Fedora i3's Login Manager and Start i3 Manually -#+description: Step-by-step guide for uninstalling the default Fedora i3 login manager and configuring system to launch i3 window manager manually. -#+slug: fedora-login-manager - -* Fedora i3's Login Manager - -Since I use the i3 spin of Fedora Workstation, I don't like to have a -login manager installed by default. As of the current version of Fedora -i3, the default login manager is LightDM. - -If this is no longer the case, you can search for currently-installed -packages with the following command and see if you can identify a -different login manager. - -#+begin_src sh -sudo dnf list installed -#+end_src - -* Removing the Login Manager - -In order to remove the login manager, simply uninstall the package. - -#+begin_src sh -sudo dnf remove lightdm -#+end_src - -* Launching i3 Manually - -In order to launch i3 manually, you need to set up your X session -properly. To start, create or edit the =~/.xinitrc= file to include the -following at the bottom. - -#+begin_src config -exec i3 -#+end_src - -Now, whenever you log in to the TTY, you can launch your desktop with -the following command. - -#+begin_src sh -startx -#+end_src -#+date: <2023-01-21 Sat 00:00:00> -#+title: Simplify Flatpak Commands: Making Symlinks for Easier App Launching -#+description: Detailed instructions for establishing symbolic links for Flatpak applications to facilitate faster execution from terminal or application launcher environments. -#+slug: flatpak-symlinks - -* Running Flatpak Apps Should Be Faster - -If you're like me and use Flatpak for those pesky apps that cannot run -on your system for one reason or another, you likely get annoyed with -opening a terminal and manually running the Flatpak app with the lengthy -=flatpak run ...= command. - -In the past, I manually created aliases in my =.zshrc= file for certain -apps. For example, an alias would look like the example below. - -This would allow me to run the command fast within the terminal, but it -wouldn't allow me to run it in an application launcher. - -#+begin_src sh -# ~/.zshrc -alias librewolf = "flatpak run io.gitlab.librewolf-community" -#+end_src - -However, I now use a much faster and better method that integrates with -the tiling WMs I use and their application launchers - =dmenu= and -=bemenu=. - -* Creating Symlinks for Flatpak Apps - -Let's use the example of Librewolf below. I can install the application -like so: - -#+begin_src sh -flatpak install flathub io.gitlab.librewolf-community -#+end_src - -Once installed, I can create a symlink to link the flatpak app to my new -symlink in a location commonly included in your PATH. In this case, I -chose =/usr/bin=. You may need to choose a different location if -=/usr/bin= isn't in your PATH. - -#+begin_src sh -ln -s /var/lib/flatpak/exports/bin/io.gitlab.librewolf-community /usr/bin/librewolf -#+end_src - -Once complete, you should be able to launch the app using the command -name you chose above in the symlink (=librewolf=) from a terminal or -from your application launcher! -#+date: <2023-01-23 Mon 00:00:00> -#+title: Automate Random Mullvad Wireguard VPN Connection on Startup -#+description: Stepwise method to configure system startup scripts for automatic connection to a randomly chosen Mullvad Wireguard VPN server to maintain privacy. -#+slug: random-wireguard - -* Mullvad Wireguard - -If you're using an OS that does not support one of Mullvad's apps, -you're likely using the Wireguard configuration files instead. - -If not, the first step is to visit Mullvad's -[[https://mullvad.net/en/account/#/wireguard-config][Wireguard -configuration files]] page and download a ZIP of the configuration files -you want to use. - -Personally, I downloaded all configuration files across the world and -chose my connections using the script below. - -Once the files are downloaded, unzip them and move them to your -preferred location: - -#+begin_src sh -cd Downloads -unzip mullvad_wireguard_linux_all_all.zip -mkdir ~/mullvad && mv ~/Downloads/*.conf ~/mullvad/ -#+end_src - -*** Creating a Script to Connect to a Random Host - -Once you have a folder of Wireguard configuration files from Mullvad, -you can create a script to randomly connect to any one of the locations. - -Start by creating a shell script - mine is called =vpn.sh=. - -#+begin_src sh -nano ~/vpn.sh -#+end_src - -Within this script, you can paste the following info. Note that I -specify =us-*= in my script, which means that it will only consider -US-based VPN locations. You can alter this or simply change it =*= to -consider all locations. - -#+begin_src sh -#!/bin/sh - -ls /home/$USER/mullvad/us-** |sort -R |tail -n 1 |while read file; do - # Replace `doas` with `sudo` if your machine uses `sudo`, - # or remove `doas` if users don't need to su to run wg-quick - doas wg-quick up $file; - printf "\nCreated Mullvad wireguard connection with file: $file"; - printf "\n\nPrinting new IP info:\n" - curl https://am.i.mullvad.net/connected -done -#+end_src - -Once you've modified the script to your liking, add executable -permissions and run the script: - -#+begin_src sh -chmod +x ~/vpn.sh -~/vpn.sh -#+end_src - -The output should look like the following: - -#+begin_src txt -doas (user@host) password: - -# ... The script will process all of the iptables and wg commands here - -Created Mullvad wireguard connection with file: /home/user/mullvad/us-nyc-wg-210.conf - -Printing new IP info: -You are connected to Mullvad (server country-city-wg-num). Your IP address is 12.345.678.99 -#+end_src - -That's all there is to it. You can see your new location and IP via the -=printf= and =curl= commands included in the script. - -You can also go to the [[https://mullvad.net/en/check/][Connection Check -| Mullvad]] page to see if you are fully connected to Mullvad and if any -leaks exist. - -* Disconnecting from the Wireguard Connection - -If you forget which connection you're using, you can execute the -following command to see where Wireguard is currently connected: - -#+begin_src sh -wg show -#+end_src - -This command will show you the Wireguard interfaces and should output a -connection like so: =interface: us-lax-wg-104=. - -Once you have this, just disconnect using that files' full path: - -#+begin_src sh -wg-quick down /home/user/mullvad/us-lax-wg-104.conf -#+end_src - -I have a TODO item on figuring out how to easily export an environment -variable that contains the configuration file's full name, so that I can -just execute the following: - -#+begin_src sh -# Ideal situation if I can export the $file variable to the environment -wg-quick down $file -#+end_src - -If you have an idea on how to do this, email me! -#+date: <2023-01-28 Sat 00:00:00> -#+title: Self-Hosting Guide: Wger -#+description: Comprehensive steps for installing, configuring, and operating the Wger workout management application on a dedicated server platform. -#+slug: self-hosting-wger - -* Wger: The Self-Hosted Workout Manager - -[[https://wger.de][Wger Workout Manager]] is a fitness tracking tool for -those who enjoy self-hosting their data. You can also register an -account on their main website if you'd prefer to try without -self-hosting. - -** Features - -I didn't see a full listing of features anywhere, so I compiled this -list of my own after installing wger: - -1. Dashboard - - - Dashboard view of Workout Schedule, Nutrition Plan, Weight Graph, & - last 5 Weight Logs - -2. Training - - - Workout Log - - Workout Schedule - - Calendar (shows weight logs and Bad/Neutral/Good days) - - Gallery (shows images you upload) - - Workout templates - - Public templates - - Exercises - -3. Nutrition - - - Nutrition plans - - BMI calculator - - Daily calories calculator - - Ingredient overview - -4. Body Weight - - - Weight overview - -** Documentation - -In order to self-host wger, I opted to use the Docker version of the -application. You can read the README within the -[[https://github.com/wger-project/docker][wger-project/docker]] project -on GitHub for information and installation instructions. - -** Installation - -To start the installation, I created a folder for wger and started -creating the three necessary files: - -#+begin_src sh -mkdir ~/wger && mkdir ~/wger/config -touch ~/wger/docker-compose.yml && \ -touch ~/wger/config/prod.env && \ -touch ~/wger/config/nginx.conf -#+end_src - -Once you have the folders and files created, you will need to copy the -contents of the =docker-compose.yml=, =prod.env=, and =nginx.conf= from -the GitHub link above. - -A few notes to explain the changes I made to the default files: - -- I updated the =ALLOW_REGISTRAION= variable in =prod.env= to =False= - after I created an account via my LAN connection, *before* I connected - this app to a publicly-available domain. -- I uncommented and updated =CSRF_TRUSTED_ORIGINS= to be equal to the - public version of this app: =https://wger.example.com=. -- I updated the port within =docker-compose.yml=, within the =nginx= - block. The port I updated this to will be reflected in my nginx - configuration file on the server (NOT the wger nginx.conf file). - -** Deploy - -Once all files are created and modified to your needs, simply start the -container. - -#+begin_src sh -docker-compose up -d -#+end_src - -You can now visit the website on your LAN by going to -=localhost:YOUR_PORT= or by the server's IP, if you're not on the same -machine that is running the container. - -If you wish to connect this app to a public domain name, you'll need to -point an =A= DNS record from the domain to your server's public IP. -You'll then need to create a configuration file for whichever web server -or reverse proxy you're using. - -Wger's README suggests the following reverse proxy configuration for -Nginx: - -#+begin_src conf -upstream wger { - # This port should match the port in the `nginx` block of docker-compose.yml - # If the container is running on this same machine, replace this with - # server 127.0.0.1:8080 - server 123.456.789.0:8080; -} - -server { - listen 80; - listen [::]:443 ssl; - listen 443 ssl; - - location / { - proxy_pass http://wger; - proxy_set_header Host $http_host; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_redirect off; - } - - server_name my.domain.example.com; - - ssl_certificate /path/to/https/certificate.crt; - ssl_certificate_key /path/to/https/certificate.key; -} -#+end_src - -* Thoughts on Wger - -I'm still playing around with the app itself, but it seems to be a solid -all-around workout manager, weight log, and food log. - -I like that the weight log graph is fluid and updates quickly. You can -also import or export data in CSV format if you'd like to move your data -elsewhere. - -The workout manager is slightly odd, as it requires you to enter sets -and reps for each exercise when you enter it into the plan. Then, when -you add a log entry for performing a workout, you then add what you -actually performed, in terms of reps and weight. - -I haven't tried the food log yet and I likely will not, at least for a -while. I have no need for a food log or calorie tracker at the moment. -#+date: <2023-02-02 Thu 00:00:00> -#+title: Getting Started with the Hare Language -#+description: Overview of the Hare programming language features, installation procedure, and elementary programming examples targeting system-level development. -#+slug: exploring-hare - -* A Quick Note - -By no means am I a professional developer, so this post will be rather -short. I won't be going into depth on the specification or anything that -technical. - -Instead, I will simply be talking about how I (a relatively basic -hobbyist programmer) have been playing with Hare and what intrigues me -about the language. - -* Hare - -The [[https://harelang.org][Hare]] programming language is a -straightforward language that should look familiar if you've ever -programmed with C, Rust, or other languages that aim to build software -at the system-level. - -The Hare homepage states the following: - -#+begin_quote -Hare is a systems programming language designed to be simple, stable, -and robust. Hare uses a static type system, manual memory management, -and minimal runtime. It is well-suited to writing operating systems, -system tools, compilers, networking software, and other low-level, high -performance tasks. -#+end_quote - -I have found this all to be true while playing with it for the first -time today. In the next few sections, I'm going to walk through my -installation and first program. - -** Installation - -I'm currently running Alpine Linux on my Thinkpad, so the installation -was quite easy as there is a package for Hare in the =apk= repositories. - -#+begin_src sh -doas apk add hare hare-doc -#+end_src - -However, I was able to install Hare from scratch on Fedora Linux a short while -ago, which was also very easy to do. If you need further instructions and Hare -doesn't have a package on your system, take a look at the [[https://harelang.org/installation/][Hare Installation]] -page. - -** Creating a Test Project - -In order to play with the language, I created [[https://github.com/ccleberg/learn/tree/main/hare][learn/hare]] and will be putting any -of my Hare-related adventures in here. - -Luckily, Hare doesn't require any complex set-up tools or build -environment. Once you have Hare installed, you simply need to create a -file ending with =.ha= and you can run a Hare program. - -I created a file called =rgb.ha= in order to test out the random number -generation and passing parameters between functions. - -#+begin_src sh -nano rgb.ha -#+end_src - -Within this file, I was able to easily import a few of the -[[https://harelang.org/tutorials/stdlib/][standard library modules]]: -=fmt=, =math::random=, and =datetime=. - -With these modules, I created two functions: - -1. =main=: This function calls the =generate_rgb= function and then - prints out the returned values. -2. =generate_rgb=: This function uses the current Unix epoch time to - generate a pseudo-random value and uses this value to create three - more random values between 0 and 255. These three numbers represent a - color in RGB format. - -#+begin_quote -*Note*: Some syntax coloring may look odd, as Zola currently doesn't -have a syntax highlighting theme for Hare. Instead, I'm using the C -theme, which may not be exactly accurate when coloring the code below. -#+end_quote - -#+begin_src C -use datetime; -use fmt; -use math::random; - -export fn main() void = { - const rgb = generate_rgb(); - fmt::printfln("RGB: ({}, {}, {})", rgb[0], rgb[1], rgb[2])!; -}; - -fn generate_rgb() []u64 = { - // Use the current Unix epoch time as the seed value - let datetime = datetime::epochunix(&datetime::now()); - - // Generate initial pseudo-random value - // You must cast the datetime from int to u64 - let x = random::init(datetime: u64); - - // Generate RGB values between (0, 255) using pseudo-random init value - let r = random::u64n(&x, 255); - let g = random::u64n(&x, 255); - let b = random::u64n(&x, 255); - - // Structure data as array and return - let rgb_array: [3]u64 = [r, g, b]; - return rgb_array; -}; -#+end_src - -** Running a Program - -Once you have a Hare file written and ready to run, you simply need to -run it: - -#+begin_src sh -hare run file.ha -#+end_src - -You can also compile the program into an executable: - -#+begin_src sh -hare build -o example file.ha -./example -#+end_src - -** Initial Thoughts - -1. Documentation Improvements Would Help - - While I was able to piece everything together eventually, the biggest - downfall right now in Hare's documentation. For such a new project, - the documentation is in a great spot. However, bare specifications - don't help as much as a brief examples section would. - - For example, it took me a while to figure out what the =u64n= - function was looking for. I could tell that it took two parameters - and the second was my max value (255), but couldn't figure out what - the first value should be. Eventually, I inspected the =random.ha= - file in the - [[https://git.sr.ht/~sircmpwn/hare/tree/master/item/math/random/random.ha][Hare - source code]] and found the test suite that helped me discover that - it needed an =init()= value in the form of =&var=. - -2. More Basic Modules - - This is another point that comes from Hare being new and awaiting - more contributions, but there are some basic functions that I would - personally enjoy seeing in Hare, such as one to convert decimal - (base 10) values to hexadecimal (base 16). - - If I'm feeling comfortable with my math, I may work on the list of - functions I want and see if any can make it into the Hare source - code. - -3. Overall Thoughts - - Overall, I actually really enjoy Hare. It's not as tedious to get a - project up and running as Rust, but it's also simpler and more - user-friendly than learning C. I am going to continue playing with it - and see if I can make anything of particular value. -#+date: <2023-05-22 Mon 00:00:00> -#+title: Navigating Burnout in Audit and Consulting: A Season Without Rest -#+description: Examination of burnout phenomena accompanied by strategies and practical approaches for workload management and restoration of optimal functioning. -#+slug: burnout - -* RE: Burnout - -I recently read -[[https://drewdevault.com/2023/05/01/2023-05-01-Burnout.html][Drew -DeVault's post on burnout]] around the same time I was pulling out of a -burnout rut myself earlier this month. Finally, seeing the light at the -end of my burnout tunnel made me want to write my first post back on -this topic. - -* Busy Seasons on Busy Seasons - -My career deals with busy seasons, generally driven by client demand. -This last year, I dealt with a harsh busy season from Aug to Oct 2022 to -issue a few SOC reports for the period ending 2022-09-30. Immediately -following that, I had to pivot and found another busy season from Oct to -Jan for financial statement audits ending on 2022-12-31. Then again, -supporting other clients from Jan to Mar 2023, followed by my current -client workload aiming for SOC reports due on 2023-06-30. - -The result? A busy season that has lasted from August 2022 through -today. I will likely be rushing throughout the next month or two before -I have a brief break and need to focus on the 2023-09-30 SOC reports -again. While auditing and consulting always involve a busy season, this -is the first time I've had one last 9+ months without a break. - -While it's been tough, I have a handful of breaks pre-planned throughout -this next cycle and should be able to moderate the level of commitment -required for each client. - -* Refocusing - -Outside of work, I finally have time to work on hobbies such as this -website, programming, athletics, games, etc. - -You may have noticed my absence if you're in the same channels, forums, -and rooms that I am, but I should finally be active again. - -I'm hoping to break an item out of my backlog soon and start working on -building a new project or hack around with a stale one. -#+date: <2023-06-08 Thu 00:00:00> -#+title: Real-Time Traffic Insights from Nginx Logs Using GoAccess + GeoIP -#+description: Step-by-step instructions to utilize GoAccess tool incorporating MaxMind GeoIP integration for real-time geographic and traffic analysis of Nginx log files. -#+slug: goaccess-geoip - -* Overview - -[[https://goaccess.io/][GoAccess]] is an open source real-time web log -analyzer and interactive viewer that runs in a terminal in *nix systems -or through your browser. - -* Installation - -To start, you'll need to install GoAccess for your OS. Here's an example -for Debian-based distros: - -#+begin_src sh -sudo apt install goaccess -#+end_src - -Next, find any number of the MaxMind GeoIP database files on GitHub or -another file hosting website. We're going to use P3TERX's version in -this example: - -#+begin_src sh -wget https://github.com/P3TERX/GeoLite.mmdb/raw/download/GeoLite2-City.mmdb -#+end_src - -Be sure to save this file in an easy to remember location! - -* Usage - -In order to utilize the full capabilities of GoAccess and MMDB, start -with the command template below and customize as necessary. This will -export an HTML view of the GoAccess dashboard, showing all relevant -information related to that site's access log. You can also omit the -=-o output.html= parameter if you prefer to view the data within the CLI -instead of creating an HTML file. - -With the addition of the GeoIP Database parameter, section -=16 - Geo Location= will be added with the various countries that are -associated with the collected IP addresses. - -#+begin_src sh -zcat /var/log/nginx/example.access.log.*.gz | goaccess \ ---geoip-database=/home/user/GeoLite2-City.mmdb \ ---date-format=%d/%b/%Y \ ---time-format=%H:%M:%S \ ---log-format=COMBINED \ --o output.html \ -/var/log/nginx/example.access.log - -#+end_src -#+date: <2023-06-08 Thu 00:00:00> -#+title: Self-Hosting Guide: Baikal -#+description: Detailed procedure for deploying the Baikal server software to provide CalDAV and CardDAV services, including security considerations and Docker deployment. -#+slug: self-hosting-baikal - -* What is Baikal? - -[[https://sabre.io/baikal/][Baikal]] is a lightweight CalDAV + CardDAV -server that you can self-host on your own machine. While I have tried (& -failed) to get this CalDAV + CardDAV server running before, it was quite -easy this time. Not really sure what I did differently this time, but -I'm documenting my process here to ensure I don't forget. - -* Installation - -First, create a folder on your server and open a =docker-compose.yml= -file for editing: - -#+begin_src sh -mkdir baikal && cd baikal -nano docker-compose.yml -#+end_src - -Within this file, you'll need to paste the information below. You can -customize the =ports= section to use any port on your server to pass -through to port 80 in the container. You can also edit the =volumes= -section to use docker volumes instead of local folders. - -#+begin_src conf -version: "2" -services: - baikal: - image: ckulka/baikal:nginx - restart: always - ports: - - "8567:80" - volumes: - - ./config:/var/www/baikal/config - - ./data:/var/www/baikal/Specific -#+end_src - -Once finished with editing, save and close the file. Then, launch the -docker container: - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -* Intial Setup - -As long as no issues came up when starting the container, you should be -able to visit the server's set-up page at =http://<server_ip>:<port>=. -The application will ask you to create an administrator account and -choose the database type for your storage. Personally, I opted to use -SQLite. - -Make sure the administrator credentials are adequate to protect against -common attacks. - -* Creating Users - -Once you've set up the application, you will be greeted by the Dashboard -page, which will show the version of the app, status of the -admin/CalDAV/CardDAV services, and the number of users, calendars, -events, address books, and contacts. - -To create a new user, navigate to the =Users and resources= page. This -process is as simple as entering a username, password, and email. - -Once a user has been created, you can create any number of calendars and -address books for user, as well as inspect their information. - -* Setting Up a Public URL - -Once your application is working locally, you can open access remotely -via a URL by using a reverse-proxy like Nginx. - -As a prerequisite, you must own a domain name and set up DNS records to -point a domain name to the server hosting Baikal. - -Start by navigating to your web server's configuration directory and -create a new file for this application. - -#+begin_src sh -cd /etc/nginx/sites-available/ -nano dav -#+end_src - -Within this file, paste in the configuration from below and change -=dav.example.com= to match the URL you'll be using. - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name dav.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name dav.example.com; - access_log /var/log/nginx/dav.access.log; - error_log /var/log/nginx/dav.error.log; - - location / { - proxy_http_version 1.1; - proxy_pass http://localhost:8567; - proxy_set_header Host $host; - } - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; -} -#+end_src - -For Nginx on Ubuntu, you'll need to symlink the configuration file to -the =sites-enabled= directory and then restart Nginx. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/dav /etc/nginx/sites-enabled/dav -sudo systemctl restart nginx.service -#+end_src - -At this point, the Baikal server should be available over the internet -at the URL configured above! - -* Configuring Clients - -Lastly, configuring clients and applications is essential to making sure -the DAV server is being fully utilized. - -You can also use the =Users and resources= page to inspect a user's -personal link to their calendars and address books by clicking the info -(i) button. It will show a URI like -=/dav.php/calendars/your-user/default/=. - -However, I found that the following URL works for most applications: -=/dav.php/principals/your-user/=. - -I used the =principals= URL above for Thunderbird (calendar, tasks, and -contacts), as well as iOS (calendar, tasks, and contacts) and everything -works flawlessly so far. - -Syncing is quick between the server and clients, and I haven't seen any -disruptions in the service or data integrity. -#+date: <2023-06-18 Sun 00:00:00> -#+title: Blocking Malicious IPs on Unifi: Manual Firewall Rule Setup -#+description: Instructions to identify and block harmful IP addresses and subnets through Unifi firewall settings to improve network security posture. -#+slug: unifi-ip-blocklist - -* Identifying Abusive IPs - -If you're like me and use Unifi network equipment at the edge of the -network you manage, you may know that Unifi is only somewhat decent at -identifying and blocking IPs that represent abusive or threat actors. - -While Unifi has a -[[https://help.ui.com/hc/en-us/articles/360006893234-UniFi-Gateway-Threat-Management][threat -management]] tool inside their Network application, it can be lacking in -functionality and identification. For example, I have my UDM Pro set to -identify and block almost all categories of threats available within the -Unifi settings. However, I regularly identify abusive actors on my web -server via the server logs. - -In addition, I have identified IP addresses and subnets directly within -Unifi's logs that the UDM did not block for whatever reason. - -This guide is meant to be another step in the process to manually block -abusive IP addresses or subnets that you have identified but are not -being automatically blocked yet. - -* Create an IP Group Profile - -To start, login to the Unifi machine's web GUI and navigate to the -Network app > Settings > Profiles. - -Within this page, choose the =IP Groups= tab and click =Create New=. - -Each IP Group profile can be used as one of three options: - -1. Port Group -2. IPv4 Address/Subnet -3. IPv6 Address/Subnet - -In this example, I'm creating an IPv4 Address/Subnet group and adding a -few different IP addresses and a subnet. Once you've added all IP -addresses and subnets, click the =Apply= button that should appear at -the bottom. - -At this point, the IPv4 Address/Subnet has been created but not yet -used. - -* Drop IP Group Profile via the Unifi Firewall - -To instruct the Unifi machine to block the profile we just created, we -need to navigate to the Network app > Settings > Firewall & Security. - -Within this screen, find the Firewall Rules table and click -=Create Entry=. This entry should contain the following settings: - -- Type: =Internet In= -- Description: =<Your Custom Rule>= -- Rule Applied: =Before Predefined Rules= -- Action: =Drop= -- Source Type: =Port/IP Group= -- IPv4 Address Group: =<Name of the Group Profile You Created Above>= - -Customize the remaining configurations to your liking, and then save and -enable the firewall rule. - -Once enabled, the Unifi machine will be able to drop all incoming -connections from the defined IP addresses and subnets within the created -profile. - -#+begin_quote -As a personal aside to this topic, I'm looking for a convenient way to -update the firewall rules or profiles remotely (within the LAN) from the -web server to accelerate this process. If you have an idea on how to -automatically update Unifi IP groups or firewall rules, let me know! -#+end_quote -#+date: <2023-06-20 Tue 00:00:00> -#+title: Audit Testing Review Checklist -#+description: Practical audit testing review template with detailed steps to support comprehensive evaluation of financial audits and SOC reports. -#+slug: audit-review-template - -* Overview - -This post is a /very/ brief overview on the basic process to review -audit test results, focusing on work done as part of a financial -statement audit (FSA) or service organization controls (SOC) report. - -While there are numerous different things to review and look for - all -varying wildly depending on the report, client, and tester - this list -serves as a solid base foundation for a reviewer. - -I have used this throughout my career as a starting point to my reviews, -and it has worked wonders for creating a consistent and objective -template to my reviews. The goal is to keep this base high-level enough -to be used on a wide variety of engagements, while still ensuring that -all key areas are covered. - -* Review Template - -1. [ ] Check all documents for spelling and grammar. -2. [ ] Ensure all acronyms are fully explained upon first use. -3. [ ] For all people referenced, use their full names and job titles - upon first use. -4. [ ] All supporting documents must cross-reference to the lead sheet - and vice-versa. -5. [ ] Verify that the control has been adequately tested: - - [ ] *Test of Design*: Did the tester obtain information regarding - how the control should perform normally and abnormally (e.g., - emergency scenarios)? - - [ ] *Test of Operating Effectiveness*: Did the tester inquire, - observe, inspect, or re-perform sufficient evidence to support - their conclusion over the control? Inquiry alone is not adequate! -6. [ ] For any information used in the control, whether by the control - operator or by the tester, did the tester appropriately document the - source (system or person), extraction method, parameters, and - completeness and accuracy (C&A)? - - [ ] For any reports, queries, etc. used in the extraction, did the - tester include a copy and notate C&A considerations? -7. [ ] Did the tester document the specific criteria that the control is - being tested against? -8. [ ] Did the tester notate in the supporting documents where each - criterion was satisfied? -9. [ ] If testing specific policies or procedures, are the documents - adequate? - - [ ] e.g., a test to validate that a review of policy XYZ occurs - periodically should also evaluate the sufficiency of the policy - itself, if meant to cover the risk that such a policy does not - exist and is not reviewed. -10. [ ] Does the test cover the appropriate period under review? - - [ ] If the test is meant to cover only a portion of the audit - period, do other controls exist to mitigate the risks that exist - for the remainder of the period? -11. [ ] For any computer-aided audit tools (CAATs) or other automation - techniques used in the test, is the use of such tools explained and - appropriately documented? -12. [ ] If prior-period documentation exists, are there any missing - pieces of evidence that would further enhance the quality of the - test? -13. [ ] Was any information discovered during the walkthrough or inquiry - phase that was not incorporated into the test? -14. [ ] Are there new rules or expectations from your company's internal - guidance or your regulatory bodies that would affect the audit - approach for this control? -15. [ ] Was an exception, finding, or deficiency identified as a result - of this test? - - [ ] Was the control deficient in design, operation, or both? - - [ ] What was the root cause of the finding? - - [ ] Does the finding indicate other findings or potential fraud? - - [ ] What's the severity and scope of the finding? - - [ ] Do other controls exist as a form of compensation against the - finding's severity, and do they mitigate the risk within the - control objective? - - [ ] Does the finding exist at the end of the period, or was it - resolved within the audit period? -#+date: <2023-06-23 Fri 00:00:00> -#+title: Using Byobu for Efficient Terminal Multiplexing -#+description: Detailed overview of Byobu terminal multiplexer features, configuration settings, session management, and keybindings to enhance command-line efficiency. -#+slug: byobu - -* Byobu - -[[https://www.byobu.org][byobu]] is a command-line tool that allows you -to use numerous screens within a single terminal emulator instance. More -specifically, it's a text based window manager, using either =screen= or -=tmux=. - -This post is mostly just a self-reference as I explore byobu, so I may -come back later and update this post with more content. - -** Screenshot - -Take a look below at my current multi-window set-up in byobu while I -write this blog post: - -#+caption: byobu -#+attr_html: :alt The Byobu multiplexer with both nano and eww opened. -[[https://img.cleberg.net/blog/20230623-byobu/byobu.webp]] - -*** Keybindings - -You can open the help menu with either of the following commands; they -will both open the same manpage: - -#+begin_src sh -byobu --help -# or -man byobu -#+end_src - -While the manpage contains a ton of information about the functionality -of byobu (such as status notifications, sessions, and windows), the -first location to explore should be the keybindings section. - -The keybindings are configured as follows: - -#+begin_src txt -byobu keybindings can be user defined in /usr/share/byobu/keybindings/ (or -within .screenrc if byobu-export was used). The common key bindings are: - -F2 - Create a new window -F3 - Move to previous window -F4 - Move to next window -F5 - Reload profile -F6 - Detach from this session -F7 - Enter copy/scrollback mode -F8 - Re-title a window -F9 - Configuration Menu -F12 - Lock this terminal -shift-F2 - Split the screen horizontally -ctrl-F2 - Split the screen vertically -shift-F3 - Shift the focus to the previous split region -shift-F4 - Shift the focus to the next split region -shift-F5 - Join all splits -ctrl-F6 - Remove this split -ctrl-F5 - Reconnect GPG and SSH sockets -shift-F6 - Detach, but do not logout -alt-pgup - Enter scrollback mode -alt-pgdn - Enter scrollback mode -Ctrl-a $ - show detailed status -Ctrl-a R - Reload profile -Ctrl-a ! - Toggle key bindings on and off -Ctrl-a k - Kill the current window -Ctrl-a ~ - Save the current window's scrollback buffer -#+end_src -#+date: <2023-06-23 Fri 00:00:00> -#+title: Self-Hosting Guide: Convos -#+description: Stepwise instructions for installation, Docker Compose configuration, Nginx reverse proxy setup, and IRC nickname registration for Convos web client hosting. -#+slug: self-hosting-convos - -* Convos - -[[https://convos.chat/][Convos]] is an always-online web client for IRC. -It has a few features that made it attractive to me as a self-hosted -option: - -- Extremely simple Docker Compose installation method. -- Runs in the background and monitors chats even while you're not logged - in. -- Neatly organized sidebar for conversation and client settings. -- Ability to connect to different hosts and create profiles for hosts. -- By default, registration is closed to the public. You can enable - public registration on the Settings page or generate invitation links - on the Users page. -- Customization of the client theme, organization name and URL, admin - email, and video service. - -* Docker Installation - -To install Convos, simply create a directory and a =docker-compose.yml= -file: - -#+begin_src sh -mkdir ~/convos && cd ~/convos -nano docker-compose.yml -#+end_src - -With the =docker-compose.yml= file open, paste the configuration below -into the file. You can customize the host port to be something unique, -such as =21897:3000=. You can also change the =data= folder to be a -docker volume instead, if you prefer. - -#+begin_src config -version: '3' - -services: - convos: - image: 'convos/convos:stable' - ports: - - '3000:3000' - volumes: - - './data:/data' - environment: - - CONVOS_REVERSE_PROXY=1 - restart: always -#+end_src - -Save the =docker-compose.yml= file and bring the container up: - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -At this point, Convos is available at =<server_ip>:3000= but not -available to the public. - -* Nginx Reverse Proxy - -If you're using Nginx, you can create a configuration file for the -convos application. Start by opening the file: - -#+begin_src sh -nano /etc/nginx/sites-available/convos -#+end_src - -Within the nginx configuration file, paste the following content and be -sure to update =convos.example.com= to match your domain and -=127.0.0.1:3000= to match the port you opened in the -=docker-compose.yml= file. - -#+begin_src config -# Host and port where convos is running -upstream convos_upstream { server 127.0.0.1:3000; } - -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name convos.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name convos.example.com; - access_log /var/log/nginx/convos.access.log; - error_log /var/log/nginx/convos.error.log; - - location / { - proxy_pass http://convos_upstream; - proxy_http_version 1.1; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection "upgrade"; - client_max_body_size 0; - proxy_set_header Host $host; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Request-Base "$scheme://$host/"; - } - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; -} -#+end_src - -Once the file is saved, link it to the =sites-enabled= directory and -restart Nginx. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/convos /etc/nginx/sites-enabled/convos -sudo systemctl restart nginx.service -#+end_src - -* Screenshots - -See the screenshots below for an example of the Convos homepage and an -excerpt of the chat screen. - -There are numerous themes to choose from; the theme shown in the images -below is Dracula. - -#+caption: Convos Home -#+attr_html: :alt The Convos login page, requiring an email and password. -[[https://img.cleberg.net/blog/20230623-convos/convos_home.webp]] - -#+caption: Convos Chat -#+attr_html: :alt An example of the #org-mode channel on Libera.Chat. -[[https://img.cleberg.net/blog/20230623-convos/convos_chat.webp]] - -* Registering a Nickname - -Hop into the server channel so that you can message NickServ. In the -case of Convos, the default sever is libera.chat. Simply click the -=libera= conversation at the top of the sidebar to open it. Once the -chat is open, you can claim a nickname by typing: - -#+begin_src txt -/nick <nick> -#+end_src - -If the nickname is available, and you'd like to register the nickname to -yourself, you'll need to type another command: - -#+begin_src txt -/msg NickServ REGISTER -<password> <email> -#+end_src - -On libera.chat, the server will send a confirmation email with a command -that you must message in IRC to verify registration of the nickname: - -#+begin_src txt -/msg NickServ VERIFY REGISTER <nick> <verification_code> -#+end_src - -Once entered, the server should confirm registration of the nickname to -the supplied email with the password specified. -#+date: <2023-06-28 Wed 00:00:00> -#+title: Automating Secure Backups with Backblaze B2 and b2 CLI -#+description: Methodical guide for configuring and utilizing Backblaze B2 cloud storage services to perform reliable and secure offsite data backups. -#+slug: backblaze-b2 - -* Overview - -Backblaze [[https://www.backblaze.com/b2/cloud-storage.html][B2 Cloud -Storage]] is an inexpensive and reliable on-demand cloud storage and -backup solution. - -The service starts at $5/TB/month ($0.005/GB/month) with a download rate -of $0.01/GB/month. - -However, there are free tiers: - -- The first 10 GB of storage is free. -- The first 1 GB of data downloaded each day is free. -- Class A transactions are free. -- The first 2500 Class B transactions each day are free. -- The first 2500 Class C transactions each day are free. - -You can see which API calls fall into categories A, B, or C here: -[[https://www.backblaze.com/b2/b2-transactions-price.html][Pricing -Organized by API Calls]]. - -For someone like me, who wants an offsite backup of their server's -=/home/= directory and various other server configs that fall under 10 -GB total, Backblaze is a great solution from a financial perspective. - -* Create An Account - -To start with Backblaze, you'll need to -[[https://www.backblaze.com/b2/sign-up.html][create a free account]] - -no payment method is required to sign up. - -Once you have an account, you can test out the service with their web -GUI, their mobile app, or their CLI tool. I'm going to use the CLI tool -below to test a file upload and then sync an entire directory to my -Backblaze bucket. - -* Create a Bucket - -Before you can start uploading, you need to create a bucket. If you're -familiar with other object storage services, this will feel familiar. If -not, it's pretty simple to create one. - -As their webpage says: - -#+begin_quote -A bucket is a container that holds files that are uploaded into B2 Cloud -Storage. The bucket name must be globally unique and must have a minimum -of 6 characters. A limit of 100 buckets may be created per account. An -unlimited number of files may be uploaded into a bucket. -#+end_quote - -Once you click the =Create a Bucket= button on their webpage or mobile -app, you need to provide the following: - -- Bucket Unique Name -- Files in Bucket are: =Private= or =Public= -- Default Encryption: =Disable= or =Enable= -- Object Lock: =Disable= or =Enable= - -For my bucket, I created a private bucket with encryption enabled and -object lock disabled. - -Once your bucket is created, you can test the upload/download feature on -their web GUI or mobile app! At this point, you have a fully functional -bucket and account. - -* Linux CLI Tool - -** Installation - -To install the =b2= CLI tool, you'll need to download it from the -[[https://www.backblaze.com/docs/cloud-storage-command-line-tools][CLI -Tools]] page. I recommend copying the URL from the link that says -=Linux= and using wget to download it, as shown below. - -Once downloaded, make the file executable and move it to a location on -your =$PATH=, so that you can execute that command from anywhere on the -machine. - -#+begin_src sh -wget <b2_cli_url> -chmod +x b2_linux -mv b2_linux /usr/bin/b2 -#+end_src - -** Log In - -The first step after installation is to log in. To do this, execute the -following command and provide your =<applicationKeyId>= and -=<applicationKey>=. - -If you don't want to provide these values in the command itself, you can -simply execute the base command and it will request them in an -interactive prompt. - -#+begin_src sh -# if you want to provide the keys directly: -b2 authorize-account [<applicationKeyId>] [<applicationKey>] - -# or, if you don't want your keys in your shell history: -b2 authorize-account -#+end_src - -** Upload a Test File - -In order to test the functionality of the CLI tool, I'll start by -uploading a single test file to the bucket I created above. We can do -this with the =upload_file= function. - -The command is issued as follows: - -#+begin_src sh -b2 upload_file <bucket_name> <local_file> <remote_file> -#+end_src - -In my situation, I executed the following command with my username. - -#+begin_src sh -b2 upload_file my_unique_bucket /home/<user>/test.md test.md -#+end_src - -To confirm that the file was uploaded successfully, list the files in -your bucket: - -#+begin_src sh -b2 ls <bucket_name> -#+end_src - -#+begin_src txt -test.md -#+end_src - -** Sync a Directory - -If you have numerous files, you can use the =sync= function to perform -functionality similar to =rsync=, where you can check what's in your -bucket and sync anything that is new or modified. - -The command is issued as follows: - -#+begin_src sh -b2 sync <source file location> <B2 bucket destination> -#+end_src - -In my case, I can sync my user's entire home directory to my bucket -without specifying any of the files directly: - -#+begin_src sh -b2 sync /home/<user>/ "b2://<bucketName>/home/<user>" -#+end_src - -* Caveats - -** Timing of Updates to the Web GUI - -When performing actions over a bucket, there is a slight delay in the -web GUI when inspecting a bucket or its file. Note that simple actions -such as uploading or deleting files may have a delay of a few minutes up -to 24 hours. In my experience (<10 GB and ~20,000 files), any actions -took only a few minutes to update across clients. - -** Symlinks - -Note that symlinks are resolved by b2, so if you have a link from -=/home/<user>/nas-storage= that symlinks out to a =/mnt/nas-storage= -folder that has 10TB of data, =b2= will resolve that link and start -uploading all 10TB of data linked within the folder. - -If you're not sure if you have any symlinks, a symlink will look like -this (note the =->= symbol): - -#+begin_src sh -> ls -lha -lrwxrwxrwx 1 root root 20 Jun 28 13:32 nas -> /mnt/nas-storage/ -#+end_src - -You can recursively find symlink in a path with the following command: - -#+begin_src sh -ls -lR /path/to/search | grep '^l' -#+end_src -#+date: <2023-06-30 Fri 00:00:00> -#+title: Self-Hosting Guide: Voyager for Lemmy -#+description: Instructions for building, running, and reverse proxying Voyager, a Lemmy web client, on a server environment utilizing Docker and Nginx components. -#+slug: self-hosting-voyager - -* Installation Guide - -[[https://github.com/aeharding/voyager][Voyager]] is a mobile-first -Lemmy web client, based on iOS design standards. It follows very closely -to Apollo's design. - -This post is a guide showing how I was able to build and launch my own -instance of Voyager via Docker Compose. - -** Clone the Repository - -Start by cloning the repository and entering it: - -#+begin_src sh -git clone https://github.com/aeharding/voyager -cd voyager -#+end_src - -** Build the Image - -With this repository, you can build the image yourself without any -further configuration. When complete, it'll give you the image ID for -you to run. - -#+begin_src sh -sudo docker build . -# Successfully built 5f00723cb5be -#+end_src - -With the image ID above, you can run the container and pass the -requested port =5314= through or use a custom port, if you wish. - -You can also set the =CUSTOM_LEMMY_SERVERS= environment variable if you -want to add to the default suggested login servers. This must be set -with a comma separated list of suggested servers. The first instance in -the list will be the default view for logged-out users. - -I will be using a =docker-compose.yml= file to run this container, -instead of a =docker run= command. - -#+begin_src sh -nano docker-compose.yml -#+end_src - -#+begin_src conf -version: "2" -services: - voyager: - image: 5f00723cb5be - restart: always - ports: - - "<custom_port>:5314" - environment: - - CUSTOM_LEMMY_SERVERS=lemmy.dbzer0.com,lemmy.world,lemmy.ml,beehaw.org -#+end_src - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -The web app will now be available at the following address: -=<machine_ip>:<custom_port>=. If you are running it on your local -device, try =localhost:<custom_port>=. - -** Reverse Proxy - -If you want to visit this app via an external URL or domain name, you'll -need to set up a reverse proxy. The example below uses Nginx as a -reverse proxy. - -Simply create the configuration file, paste the contents below, save the -file, symlink the file, and restart Nginx. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/voyager -#+end_src - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name voyager.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name voyager.example.com; - access_log /var/log/nginx/voyager.access.log; - error_log /var/log/nginx/voyager.error.log; - - location / { - proxy_http_version 1.1; - proxy_pass http://localhost:5314; - proxy_set_header Host $host; - } - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; -} -#+end_src - -#+begin_src sh -sudo ln sudo ln -s /etc/nginx/sites-available/voyager /etc/nginx/sites-enabled/voyager -sudo systemctl restart nginx.service -#+end_src - -The site will now be available at the =server_name= you specified above! - -You can visit my instance at -[[https://voyager.cleberg.net][voyager.cleberg.net]] for an example. -#+date: <2023-07-12 Wed 00:00:00> -#+title: Enabling Local Network Access with Mullvad WireGuard Configs -#+description: Detailed procedure to modify Mullvad Wireguard VPN configuration files and iptables rules to allow Local Area Network access while maintaining VPN connectivity. -#+slug: wireguard-lan - -* Download Configuration Files from Mullvad - -To begin, you'll need -[[https://mullvad.net/account/wireguard-config][Wireguard configuration -files from Mullvad]]. You can choose any of the options as you download -them. For example, I enabled the kill switch, selected all countries, -and selected a few content filters. - -Once downloaded, unzip the files and move them to the Wireguard folder -on your system. - -#+begin_src sh -cd ~/Downloads -unzip mullvad_wireguard_linux_all_all.zip -doas mv *.conf /etc/wireguard/ -#+end_src - -** Configuration File Layout - -The default configuration files will look something like this: - -#+begin_src conf -[Interface] -# Device: <redacted> -PrivateKey = <redacted> -Address = <redacted> -DNS = <redacted> -PostUp = iptables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT && ip6tables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT -PreDown = iptables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT && ip6tables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT - -[Peer] -PublicKey = <redacted> -AllowedIPs = <redacted> -Endpoint = <redacted> -#+end_src - -#+begin_quote -Note: If you didn't select the kill switch option, you won't see the -=PostUp= and =PreDown= lines. In this case, you'll need to modify the -script below to simply append those lines to the =[Interface]= block. -#+end_quote - -* Editing the Configuration Files - -Once you have the files, you'll need to edit them and replace the -=PostUp= and =PreDown= lines to enable LAN access. - -I recommend that you do this process as root, since you'll need to be -able to access files in =/etc/wireguard=, which are generally owned by -root. You can also try using =sudo= or =doas=, but I didn't test that -scenario so you may need to adjust, as necessary. - -#+begin_src sh -su -#+end_src - -Create the Python file that we'll be using to update the Wireguard -configuration files. - -#+begin_src sh -nano replace.py -#+end_src - -Within the Python file, copy and paste the logic below. This script will -open a directory, loop through every configuration file within the -directory, and replace the =PostUp= and =PreDown= lines with the new -LAN-enabled iptables commands. - -#+begin_quote -Note: If your LAN is on a subnet other than =192.168.1.0/24=, you'll -need to update the Python script below appropriately. -#+end_quote - -#+begin_src python -import os -import fileinput - -print("--- starting ---") - -dir = "/etc/wireguard/" - -for file in os.listdir(dir): - print(os.path.join(dir, file)) - for line in fileinput.input(os.path.join(dir, file), inplace=True): - if "PostUp" in line: - print("PostUp = iptables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL ! -d 192.168.1.0/24 -j REJECT && ip6tables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT") - elif "PreDown" in line: - print("PreDown = iptables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL ! -d 192.168.1.0/24 -j REJECT && ip6tables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT") - else: - print(line, end="") - -print("--- done ---") -#+end_src - -Once you're done, save and close the file. You can now run the Python -script and watch as each file is updated. - -#+begin_src sh -python3 replace.py -#+end_src - -To confirm it worked, you can =cat= one of the configuration files to -inspect the new logic and connect to one to test it out. - -#+begin_src sh -cat /etc/wireguard/us-chi-wg-001.conf -#+end_src - -The configuration files should now look like this: - -#+begin_src conf -[Interface] -# Device: <redacted> -PrivateKey = <redacted> -Address = <redacted> -DNS = <redacted> -PostUp = iptables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL ! -d 192.168.1.0/24 -j REJECT && ip6tables -I OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT -PreDown = iptables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL ! -d 192.168.1.0/24 -j REJECT && ip6tables -D OUTPUT ! -o %i -m mark ! --mark $(wg show %i fwmark) -m addrtype ! --dst-type LOCAL -j REJECT - -[Peer] -PublicKey = <redacted> -AllowedIPs = <redacted> -Endpoint = <redacted> -#+end_src - -If you connect to a Wireguard interface, such as =us-chi-wg-001=, you -can test your SSH functionality and see that it works even while on the -VPN. - -#+begin_src sh -wg-quick up us-chi-wg-001 -ssh user@lan-host -#+end_src - -To confirm your VPN connection, you can curl Mullvad's connection API: - -#+begin_src sh -curl https://am.i.mullvad.net/connected -# You are connected to Mullvad (server us-chi-wg-001). Your IP address is <redacted> -#+end_src -#+date: <2023-07-19 Wed 00:00:00> -#+title: Plex Subtitle Error: Transcoder Fails to Start -#+description: Technical procedures to identify and correct Plex transcoder failures at startup to maintain uninterrupted media conversion and playback. -#+slug: plex-transcoder-errors - -* Plex Transcoder Error - -Occasionally, you may see an error in your Plex client that references a -failure with the transcoder conversion process. The specific error -wording is: - -#+begin_src txt -Conversion failed. The transcoder failed to start up. -#+end_src - -* Debugging the Cause - -In order to get a better look at what is causing the error, I'm going to -observe the Plex console while the error occurs. To do this, open the -Plex web client, go to =Settings= > =Manage= > =Console=. Now, try to -play the title again and watch to see which errors occur. - -In my case, you can see the errors below are related to a subtitle file -(=.srt=) causing the transcoder to crash. - -#+begin_src txt -Jul 19, 2023 16:49:34.945 [140184571120440] Error — Couldn't find the file to stream: /movies/Movie Title (2021)/Movie Title (2021).srt -Jul 19, 2023 16:49:34.947 [140184532732728] Error — [Req#7611/Transcode/42935159-67C1-4192-9336-DDC6F7BC9330] Error configuring transcoder: TPU: Failed to download sub-stream to temporary file -Jul 19, 2023 16:49:35.225 [140184532732728] Warning — [Req#760d/Transcode] Got a request to stop a transcode session without a valid session GUID. -Jul 19, 2023 16:49:45.561 [140184532732728] Info — [Req#7648] AutoUpdate: no updates available -Jul 19, 2023 16:51:23.402 [140184510081848] Info — Library section 1 (Movies) will be updated because of a change in "/movies/Movie Title (2021)/Movie Title (2021).srt" -#+end_src - -* Solving the Error - -In my case, I simply removed the subtitle file because it was not -critical to keep. You may also avoid this by turning off subtitles if -you don't want to delete the file. - -#+begin_src sh -rm -rf "/movies/Movie Title (2021)/Movie Title (2021).srt" -#+end_src - -Once the subtitle is removed from the directory or subtitles are turned -off, try to play the title again. At this point, it should play without -error. If not, reopen or refresh your Plex client and the Plex server: - -#+begin_src sh -sudo systemctl restart plexmediaserver.service -#+end_src - -* Related Discussion - -Looking at -[[https://forums.plex.tv/t/subtitles-crashing-plex-transcoder-samsung-q80-tv-with-or-without-hardware-transcode/741441/2][a -related Plex forum post]], it seems that =.srt= subtitles are the core -issue here. However, Plex does not seem to have a resolution that fixes -these errors. - -Unfortunately, I would suggest converting subtitle formats, burning the -subtitles into the title, or simply removing subtitles when they cause -crashes. -#+date: <2023-08-18 Fri 00:00:00> -#+title: Agile Auditing Framework: Using Scrum and Kanban in Audit Projects -#+description: Detailed examination of Agile auditing methodologies, including Scrum and Kanban frameworks, with practical steps for application in audit processes. -#+slug: agile-auditing - -* What is Agile Auditing? - -[[https://en.wikipedia.org/wiki/Agile_software_development][Agile]], the -collaborative philosophy behind many software development methods, has -been picking up steam as a beneficial tool to use in the external and -internal auditing world. - -This blog post will walk through commonly used terms within Agile, -Scrum, and Kanban in order to translate these terms and roles into -audit-specific terms. - -Whether your team is in charge of a financial statement audit, an -attestation (SOC 1, SOC 2, etc.), or a unique internal audit, the terms -used throughout this post should still apply. - -* Agile - -To start, I'll take a look at Agile. - -#+begin_quote -The Agile methodology is a project management approach that involves -breaking the project into phases and emphasizes continuous collaboration -and improvement. Teams follow a cycle of planning, executing, and -evaluating. -#+end_quote - -While this approach may seem familiar to what audit teams have -historically done, an audit team must make distinct changes in their -mentality and how they approach and manage a project. - -** Agile Values - -The Agile Manifesto, written in 2001 at a summit in Utah, contain a set -of four main values that comprise the Agile approach: - -1. Individuals and interactions over processes and tools. -2. Working software over comprehensive documentation. -3. Customer collaboration over contract negotiation. -4. Responding to change over following a plan. - -Beyond the four values, -[[https://agilemanifesto.org/principles.html][twelve principles]] were -also written as part of the summit. - -In order to relate these values to an audit or attestation engagement, -we need to shift the focus from software development to the main goal of -an engagement: completing sufficient audit testing to address to -relevant risks over the processes and controls at hand. - -Audit Examples: - -- Engagement teams must value the team members, client contacts, and - their interactions over the historical processes and tools that have - been used. -- Engagement teams must value a final report that contains sufficient - audit documentation over excessive documentation or scope creep. -- Engagement teams must collaborate with the audit clients as much as - feasible to ensure that both sides are constantly updated with current - knowledge of the engagement's status and any potential findings, - rather than waiting for pre-set meetings or the end of the engagement - to communicate. -- Engagement teams must be able to respond to change in an engagement's - schedule, scope, or environment to ensure that the project is - completed in a timely manner and that all relevant areas are tested. - - In terms of an audit department's portfolio, they must be able to - respond to changes in their company's or client's environment and be - able to dynamically change their audit plan accordingly. - -* Scrum - -The above section discusses the high-level details of the Agile -philosophy and how an audit team can potentially mold that mindset into -the audit world, but how does a team implement these ideas? - -There are many methods that use an Agile mindset, but I prefer -[[https://en.wikipedia.org/wiki/Scrum_(software_development)][Scrum]]. -Scrum is a framework based on Agile that enables a team to work through -a project through a series of roles, ceremonies, artifacts, and values. - -Let's dive into each of these individually. - -** Scrum Team - -A scrum project is only as good as the team running the project. -Standard scrum teams are separated into three distinct areas: - -1. *Product Owner (Client Contact)*: The client contact is the audit - equivalent of the product owner in Scrum. They are responsible for - partnering with the engagement or audit team to ensure progress is - being made, priorities are established, and clear guidance is given - when questions or findings arise within each sprint. -2. *Scrum Master (Engagement Lead)*: The engagement or audit team lead - is responsible for coaching the team and the client contact on the - scrum process, tracking team progress against plan, scheduling - necessary resources, and helping remove obstacles. -3. *Scrum Developers (Engagement Members)*: The engagement or audit team - is the set of team members responsible for getting the work done. - These team members will work on each task, report progress, resolve - obstacles, and collaborate with other team members and the client - contact to ensure goals are being met. - -** Scrum Ceremonies - -Scrum ceremonies are events that are performed on a regular basis. - -1. *Sprint Planning*: The team works together to plan the upcoming - sprint goal and which user stories (tasks) will be added to the - sprint to achieve that goal. -2. *Sprint*: The time period, typically at least one week and no more - than one month in length, where the team works on the stories and - anything in the backlog. -3. *Daily Scrum*: A very short meeting held each day, typically 15 - minutes, to quickly emphasize alignment on the sprint goal and plan - the next 24 hours. Each team member may share what they did the day - before, what they'll do today, and any obstacles to their work. -4. *Sprint Review*: At the end of each sprint, the team will gather and - discuss the progress, obstacles, and backlog from the previous - sprint. -5. *Sprint Retrospective*: More specific than the sprint review, the - retrospective is meant to discuss what worked and what did not work - during the sprint. This may be processes, tools, people, or even - things related to the Scrum ceremonies. - -One additional ceremony that may be applicable is organizing the -backlog. This is typically the responsibility of the engagement leader -and is meant to prioritize and clarify what needs to be done to complete -items in the backlog. - -** Artifacts - -While artifacts are generally not customizable in the audit world (i.e., -each control test must include some kind of working paper with evidence -supporting the test results), I wanted to include some quick notes on -associating scrum artifact terms with an audit. - -1. *Product Backlog*: This is the overall backlog of unfinished audit - tasks from all prior sprints. -2. *Sprint Backlog*: This is the backlog of unfinished audit tasks from - one individual sprint. -3. *Increment*: This is the output of each sprint - generally this is - best thought of as any documentation prepared during the sprint, such - as risk assessments, control working papers, deficiency analysis, - etc. - -* Kanban - -Last but not least, Kanban is a methodology that relies on boards to -categorize work into distinct, descriptive categories that allow an -agile or scrum team to effectively plan the work of a sprint or project. - -See Atlassian's [[https://www.atlassian.com/agile/kanban][Kanban]] page -for more information. -#+date: <2023-09-15 Fri 00:00:00> -#+title: Self-Hosting Guide: GitWeb -#+description: Stepwise instructions for deploying GitWeb on Linux servers using Nginx, configuring fastcgi, and managing git repositories effectively. -#+slug: self-hosting-gitweb - -* Overview - -[[https://git-scm.com/book/en/v2/Git-on-the-Server-GitWeb][GitWeb]] is a -simple web-based visualizer for git repositories. By default, GitWeb -will only run with the =lighttpd= or =webrick= web servers. - -However, this guide will show you how to keep GitWeb running in the -background and display information for all repositories in a chosen -directory. - -* Install Dependencies - -To start, you'll need install the following packages: - -#+begin_src sh -sudo apt install git gitweb fcgiwrap nginx -#+end_src - -* Configure Nginx - -Once installed, create an Nginx configuration file. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/git.example.com -#+end_src - -#+begin_src conf -server { - listen 80; - server_name example.com; - - location /index.cgi { - root /usr/share/gitweb/; - include fastcgi_params; - gzip off; - fastcgi_param SCRIPT_NAME $uri; - fastcgi_param GITWEB_CONFIG /etc/gitweb.conf; - fastcgi_pass unix:/var/run/fcgiwrap.socket; - } - - location / { - root /usr/share/gitweb/; - index index.cgi; - } -} -#+end_src - -To make the configuration active, you need to symlink it and then -restart Nginx. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/git.example.com /etc/nginx/sites-enabled/git.example.com -sudo systemctl restart nginx.service -#+end_src - -The GitWeb application should now be available via the URL you set in -the Nginx configuration above. - -* Customize GitWeb - -If you need to, you can customize many things about Gitweb by editing -the [[https://git-scm.com/docs/gitweb.conf][gitweb.conf]] file. - -#+begin_src sh -sudo nano /etc/gitweb.conf -#+end_src -#+date: <2023-09-19 Tue 00:00:00> -#+title: Auditing User Privileges in Oracle, SQL Server, and MySQL -#+description: Collection of SQL queries designed for auditing user access parameters on Oracle, Microsoft SQL Server, and MySQL database systems. -#+slug: audit-sql-scripts - -* Overview - -When you have to scope a database into your engagement, you may be -curious how to best extract the information from the database. While -there are numerous different methods to extract this type of -information, I'm going to show an example of how to gather all users and -privileges from three main database types: Oracle, Microsoft SQL, and -MySQL. - -* Oracle - -You can use the following SQL script to see all users and their -privileges in an Oracle database: - -#+begin_src sql -SELECT - grantee AS "User", - privilege AS "Privilege" -FROM - dba_sys_privs -WHERE - grantee IN (SELECT DISTINCT grantee FROM dba_sys_privs) -UNION ALL -SELECT - grantee AS "User", - privilege AS "Privilege" -FROM - dba_tab_privs -WHERE - grantee IN (SELECT DISTINCT grantee FROM dba_tab_privs); -#+end_src - -This script queries the =dba_sys_privs= and =dba_tab_privs= views to -retrieve system and table-level privileges respectively. It then -combines the results using =UNION ALL= to show all users and their -associated privileges. Please note that this method does not extract -information from the =dba_role_privs= table - use the method below for -that data. - -Please note that you might need appropriate privileges (e.g., DBA -privileges) to access these views, and you should exercise caution when -querying system tables in a production Oracle database. - -** Alternative Oracle Query - -You can also extract each table's information separately and perform -processing outside the database to explore and determine the information -necessary for the audit: - -#+begin_src sql -SELECT ** FROM sys.dba_role_privs; -SELECT ** FROM sys.dba_sys_privs; -SELECT ** FROM sys.dba_tab_privs; -SELECT ** FROM sys.dba_users; -#+end_src - -* Microsoft SQL - -You can use the following SQL script to see all users and their -privileges in a Microsoft SQL Server database -([[https://stackoverflow.com/a/30040784][source]]): - -#+begin_src sql -/* -Security Audit Report -1) List all access provisioned to a sql user or windows user/group directly -2) List all access provisioned to a sql user or windows user/group through a database or application role -3) List all access provisioned to the public role - -Columns Returned: -UserName : SQL or Windows/Active Directory user account. This could also be an Active Directory group. -UserType : Value will be either 'SQL User' or 'Windows User'. This reflects the type of user defined for the - SQL Server user account. -DatabaseUserName: Name of the associated user as defined in the database user account. The database user may not be the - same as the server user. -Role : The role name. This will be null if the associated permissions to the object are defined at directly - on the user account, otherwise this will be the name of the role that the user is a member of. -PermissionType : Type of permissions the user/role has on an object. Examples could include CONNECT, EXECUTE, SELECT - DELETE, INSERT, ALTER, CONTROL, TAKE OWNERSHIP, VIEW DEFINITION, etc. - This value may not be populated for all roles. Some built in roles have implicit permission - definitions. -PermissionState : Reflects the state of the permission type, examples could include GRANT, DENY, etc. - This value may not be populated for all roles. Some built in roles have implicit permission - definitions. -ObjectType : Type of object the user/role is assigned permissions on. Examples could include USER_TABLE, - SQL_SCALAR_FUNCTION, SQL_INLINE_TABLE_VALUED_FUNCTION, SQL_STORED_PROCEDURE, VIEW, etc. - This value may not be populated for all roles. Some built in roles have implicit permission - definitions. -ObjectName : Name of the object that the user/role is assigned permissions on. - This value may not be populated for all roles. Some built in roles have implicit permission - definitions. -ColumnName : Name of the column of the object that the user/role is assigned permissions on. This value - is only populated if the object is a table, view or a table value function. -,*/ - ---List all access provisioned to a sql user or windows user/group directly -SELECT - [UserName] = CASE princ.[type] - WHEN 'S' THEN princ.[name] - WHEN 'U' THEN ulogin.[name] COLLATE Latin1_General_CI_AI - END, - [UserType] = CASE princ.[type] - WHEN 'S' THEN 'SQL User' - WHEN 'U' THEN 'Windows User' - END, - [DatabaseUserName] = princ.[name], - [Role] = null, - [PermissionType] = perm.[permission_name], - [PermissionState] = perm.[state_desc], - [ObjectType] = obj.type_desc,--perm.[class_desc], - [ObjectName] = OBJECT_NAME(perm.major_id), - [ColumnName] = col.[name] -FROM - --database user - sys.database_principals princ -LEFT JOIN - --Login accounts - sys.login_token ulogin on princ.[sid] = ulogin.[sid] -LEFT JOIN - --Permissions - sys.database_permissions perm ON perm.[grantee_principal_id] = princ.[principal_id] -LEFT JOIN - --Table columns - sys.columns col ON col.[object_id] = perm.major_id - AND col.[column_id] = perm.[minor_id] -LEFT JOIN - sys.objects obj ON perm.[major_id] = obj.[object_id] -WHERE - princ.[type] in ('S','U') -UNION ---List all access provisioned to a sql user or windows user/group through a database or application role -SELECT - [UserName] = CASE memberprinc.[type] - WHEN 'S' THEN memberprinc.[name] - WHEN 'U' THEN ulogin.[name] COLLATE Latin1_General_CI_AI - END, - [UserType] = CASE memberprinc.[type] - WHEN 'S' THEN 'SQL User' - WHEN 'U' THEN 'Windows User' - END, - [DatabaseUserName] = memberprinc.[name], - [Role] = roleprinc.[name], - [PermissionType] = perm.[permission_name], - [PermissionState] = perm.[state_desc], - [ObjectType] = obj.type_desc,--perm.[class_desc], - [ObjectName] = OBJECT_NAME(perm.major_id), - [ColumnName] = col.[name] -FROM - --Role/member associations - sys.database_role_members members -JOIN - --Roles - sys.database_principals roleprinc ON roleprinc.[principal_id] = members.[role_principal_id] -JOIN - --Role members (database users) - sys.database_principals memberprinc ON memberprinc.[principal_id] = members.[member_principal_id] -LEFT JOIN - --Login accounts - sys.login_token ulogin on memberprinc.[sid] = ulogin.[sid] -LEFT JOIN - --Permissions - sys.database_permissions perm ON perm.[grantee_principal_id] = roleprinc.[principal_id] -LEFT JOIN - --Table columns - sys.columns col on col.[object_id] = perm.major_id - AND col.[column_id] = perm.[minor_id] -LEFT JOIN - sys.objects obj ON perm.[major_id] = obj.[object_id] -UNION ---List all access provisioned to the public role, which everyone gets by default -SELECT - [UserName] = '{All Users}', - [UserType] = '{All Users}', - [DatabaseUserName] = '{All Users}', - [Role] = roleprinc.[name], - [PermissionType] = perm.[permission_name], - [PermissionState] = perm.[state_desc], - [ObjectType] = obj.type_desc,--perm.[class_desc], - [ObjectName] = OBJECT_NAME(perm.major_id), - [ColumnName] = col.[name] -FROM - --Roles - sys.database_principals roleprinc -LEFT JOIN - --Role permissions - sys.database_permissions perm ON perm.[grantee_principal_id] = roleprinc.[principal_id] -LEFT JOIN - --Table columns - sys.columns col on col.[object_id] = perm.major_id - AND col.[column_id] = perm.[minor_id] -JOIN - --All objects - sys.objects obj ON obj.[object_id] = perm.[major_id] -WHERE - --Only roles - roleprinc.[type] = 'R' AND - --Only public role - roleprinc.[name] = 'public' AND - --Only objects of ours, not the MS objects - obj.is_ms_shipped = 0 -ORDER BY - princ.[Name], - OBJECT_NAME(perm.major_id), - col.[name], - perm.[permission_name], - perm.[state_desc], - obj.type_desc--perm.[class_desc] -#+end_src - -* MySQL - -You can use the following SQL script to see all users and their -privileges in a MySQL database: - -#+begin_src sh -mysql -u root -p -#+end_src - -Find all users and hosts with access to the database: - -#+begin_src sql -SELECT ** FROM information_schema.user_privileges; -#+end_src - -This script retrieves user information and their associated -database-level privileges from the =information_schema.user_privileges= -table in MySQL. It lists various privileges such as SELECT, INSERT, -UPDATE, DELETE, CREATE, and more for each user and database combination. - -Please note that you may need appropriate privileges (e.g., =SELECT= -privileges on =information_schema.user_privileges=) to access this -information in a MySQL database. Additionally, some privileges like -GRANT OPTION, EXECUTE, EVENT, and TRIGGER may not be relevant for all -users and databases. - -** Alternative MySQL Query - -You can also grab individual sets of data from MySQL if you prefer to -join them after extraction. I have marked the queries below with -=SELECT ...= and excluded most =WHERE= clauses for brevity. You should -determine the relevant privileges in-scope and query for those -privileges to reduce the length of time to query. - -#+begin_src sql --- Global Permissions -SELECT ... FROM mysql.user; - --- Database Permissions -SELECT ... FROM mysql.db -WHERE db = @db_name; - --- Table Permissions -SELECT ... FROM mysql.tables -WHERE db = @db_name; - --- Column Permissions -SELECT ... FROM mysql.columns_priv -WHERE db = @db_name; - --- Password Configuration -SHOW GLOBAL VARIABLES LIKE 'validate_password%'; -SHOW VARIABLES LIKE 'validate_password%'; -#+end_src -#+date: <2023-10-04 Wed 00:00:00> -#+title: Digital Minimalism: Reducing Distractions -#+description: Practical guide for minimizing digital clutter and optimizing work focus by applying digital minimalism tactics. -#+slug: digital-minimalism - -I've written [[https://cleberg.net/wiki/#digital-garden][a note about minimalism]] -before, but I wanted to dedicate some time to reflect on digital -minimalism and how I've been able to minimize the impact of digital -devices in my life. - -#+begin_quote -These changes crept up on us and happened fast, before we had a chance -to step back and ask what we really wanted out of the rapid advances of -the past decade. We added new technologies to the periphery of our -experience for minor reasons, then woke one morning to discover that -they had colonized the core of our daily life. We didn't, in other -words, sign up for the digital world in which we're currently -entrenched; we seem to have stumbled backward into it. - -/(Digital Minimalism, 2019)/ -#+end_quote - -* The Principles of Digital Minimalism - -As noted in Cal Newport's book, /Digital Minimalism/, there are three -main principles to digital minimalism that I tend to agree with: - -1. Clutter is costly. - - Digital minimalists recognize that cluttering their time and - attention with too many devices, apps, and services creates an - overall negative cost that can swamp the small benefits that each - individual item provides in isolation. -2. Optimization is important. - - Digital minimalists believe that deciding a particular technology - supports something they value is only the first step. To truly - extract its full potential benefit, it's necessary to think - carefully about how they'll use the technology. -3. Intentionality is satisfying. - - Digital minimalists derive significant satisfaction from their - general commitment to being more intentional about how they engage - with new technologies. This source of satisfaction is independent - of the specific decisions they make and is one of the biggest - reasons that minimalism tends to be immensely meaningful to its - practitioners. - -* Taking Action - -In order to put the logic into practice, I've created a few new habits -and continued performing old habits that are working well: - -** Using Devices With Intention - -- I already rarely use "social media", mostly limited to forums such as - Hacker News and Tildes, so I've just tweaked my behavior to stop - looking for content in those places when I'm bored. -- Use devices with intention. Each time I pick up a digital device, - there should be an intention to use the device to improve my current - situation. No more endless scrolling or searching for something to - interest me. - -** Prevent Distractions - -- Disable (most) notifications on all devices. I spent 15-30 minutes - going through the notifications on my phone, watch, and computer to - ensure that only a select few apps have the ability to interrupt me: - Calendar, Messages, Phone, Reminders, & Signal. -- Disable badges for any apps except the ones mentioned in the bullet - above. -- Set-up focus profiles across devices so that I can enable different - modes, such as Personal when I only want to see notifications from - people I care about or Do Not Disturb, where absolutely nothing can - interrupt me. -- Clean up my home screens. This one was quite easy as I already - maintain a minimalist set-up, but I went extreme by limiting my phone - to just eight apps on the home screen and four in the dock. If I need - another app, I'll have to search or use the app library. -- Remove the work profile from my phone. This was a tough decision as - having my work profile on my device definitely makes my life easier at - times, but it also has quite a negative effect when I'm "always - online" and can see the notifications and team activity 24/7. I - believe creating a distinct barrier between my work and personal - devices will be beneficial in the end. - -** Creating Alternative Activities - -This is the most difficult piece, as most of my hobbies and interests -lie in the digital world. However, I'm making a concerted effort to put -devices down unless necessary and force myself to perform other -activities in the physical world instead. - -I've started with a few basics that are always readily available to me: - -- Do a chore, such as organizing or cleaning. -- Read a book, study a piece of art, etc. -- Exercise or get outdoors. -- Participate in a hobby, such as photography, birding, disc golf, etc. -- Let yourself be bored and wander into creativity. - -* Making Progress - -I'll be taking notes as I continue down this journey and hope to see -positive trends. I've always been a minimalist in the physical world and -it feels refreshing to filter out the clutter that has come to dominate -my digital life over the years. - -I'm excited to see where this journey leads. -#+date: <2023-10-11 Wed 00:00:00> -#+title: Self-Hosting Guide: Authelia -#+description: Instructional guide for setting up Authelia to provide secure two-factor authentication and access control in self-hosted environments. -#+slug: self-hosting-authelia - -* Overview - -[[https://www.authelia.com/][Authelia]] is an open-source authentication -service that allows you to place a portal between end users on the -internet and self-hosted services on your server. - -You can require one factor (username+password) or two factor -authentication for any such user before allowing them to access a -specific service on your domain. - -This guide will walk through a standard installation of Authelia for -=example.com=, using =auth.example.com= as Authelia's authentication -domain and =teddit.example.com= as the website we want to protect behind -the authentication portal. - -* Prerequisites - -This guide assumes you have the following already set-up: - -- A registered domain with DNS pointing to your server. -- A subdomain for Authelia (=auth.example.com=) and a subdomain to - protect via Authelia (=app.example.com=). -- A working Nginx web server. -- Docker and docker-compose installed. - -* Installation - -This guide will walk through each installation step one-by-one, starting -with the container and finishing by cleaning up external access via an -Nginx reverse proxy. - -** Docker-Compose - -To start, create a directory for Authelia and create a -=docker-compose.yml= file. - -#+begin_src sh -mkdir ~/authelia -nano ~/authelia/docker-compose.yml -#+end_src - -Within this file, paste the following content. If you prefer a different -local port, modify the port on the left side of the colon on the -=9091:9091= line. Be sure to modify the =TZ= variable to your timezone. - -#+begin_src yml -version: "3.3" - -services: - authelia: - image: authelia/authelia - container_name: authelia - volumes: - - ./config:/config - ports: - - 9091:9091 - environment: - - TZ=America/Chicago -#+end_src - -Start the container with docker-compose: - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -After the first start, the container will automatically exit and require -you to modify the app's configuration files before continuing. Read on -to learn more. - -** Authelia Configuration - -To configure Authelia before we restart the container, we need to open -the =config= directory and modify the files. Start by editing the -=configuration.yml= file, where all of Authelia's settings are stored. - -My personal preference is to copy the original configuration file to a -backup file and edit a fresh copy. - -#+begin_src sh -sudo cp ~/authelia/config/configuration.yml ~/authelia/config/configuration.yml.bk -sudo nano ~/authelia/config/configuration.yml -#+end_src - -Within the blank =configuration.yml= file, paste the following -information. You will need to make quite a few updates, so be sure to -read each line carefully and modify as necessary. - -The major required changes are: - -- Any instances of =example.com= should be replaced by your domain. -- =jwt_secret= - Use the =pwgen 40 1= command to generate a secret for - yourself. -- =access_control= - Set the Authelia domain to bypass here, as well as - any subdomains you want to protect. -- =session= > =secret= - Use the =pwgen 40 1= command to generate a - secret for yourself. -- =regulation= - Set the variables here to restrict login attempts and - bans. -- =storage= > =encryption_key= - Use the =pwgen 40 1= command to - generate a secret for yourself. -- =smtp= - If you have access to an SMTP service, set up the information - here to active outgoing emails. - -#+begin_src yml -# yamllint disable rule:comments-indentation ---- -############################################################################### -# Authelia Configuration # -############################################################################### - -theme: dark -jwt_secret: aiS5iedaiv6eeVaideeLeich5roo6ohvaf3Vee1a # pwgen 40 1 - -default_redirection_url: https://example.com - -server: - host: 0.0.0.0 - port: 9091 - path: "" - read_buffer_size: 4096 - write_buffer_size: 4096 - enable_pprof: false - enable_expvars: false - disable_healthcheck: false - tls: - key: "" - certificate: "" - -log: - level: debug - -totp: - issuer: example.com - period: 30 - skew: 1 - -authentication_backend: - disable_reset_password: false - refresh_interval: 5m - file: - path: /config/users_database.yml - password: - algorithm: argon2id - iterations: 1 - key_length: 32 - salt_length: 16 - memory: 1024 - parallelism: 8 - -access_control: - default_policy: deny - rules: - - domain: - - "auth.example.com" - policy: bypass - - domain: "teddit.example.com" - policy: one_factor - -session: - name: authelia_session - secret: aiS5iedaiv6eeVaideeLeich5roo6ohvaf3Vee1a # pwgen 40 1 - expiration: 3600 - inactivity: 300 - domain: example.com - -regulation: - max_retries: 5 - find_time: 10m - ban_time: 12h - -storage: - local: - path: /config/db.sqlite3 - encryption_key: aiS5iedaiv6eeVaideeLeich5roo6ohvaf3Vee1a # pwgen 40 1 - -notifier: - disable_startup_check: true - smtp: - username: [email protected] - password: password - host: smtp.example.com - port: 465 - sender: [email protected] - identifier: example.com - subject: "[Authelia] {title}" - startup_check_address: [email protected] - disable_require_tls: false - disable_html_emails: true - tls: - skip_verify: false - minimum_version: TLS1.2 -#+end_src - -** Authelia Users - -Next, create the users file for authentication. - -#+begin_src sh -sudo nano ~/authelia/config/users_database.yml -#+end_src - -Within the file, you will need to create an entry for each user that -needs access to Authelia. The =my_username= entry will be the username -used on the login page. - -To generate the password, go to [[https://argon2.online][Argon2 Hash -Generator]], generate a random salt, and make sure the rest of the -settings match the =authentication_backend= section of -=configuration.yml= file. - -#+begin_src yaml -users: - my_username: - displayname: "My User" - # Generated at https://argon2.online/ -- match the settings in - # the `authentication_backend` section of configuration.yml - password: "" - email: [email protected] - groups: - - admins - - dev -#+end_src - -Once the app is configured, restart the container from scratch. - -#+begin_src sh -cd ~/authelia -sudo docker-compose down && sudo docker-compose up -d -#+end_src - -** Nginx: Authelia Domain - -Once the container is running and configured, the final step is to -configure external access to the server via Nginx reverse proxy. - -Start by creating the Authelia domain. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/auth -#+end_src - -Within this file, paste the following information and be sure to update -=example.com= to your domain. Make sure the =$upstream_authelia= -variable matches the location of your Authelia container. - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name auth.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name auth.example.com; - access_log /var/log/nginx/auth.access.log; - error_log /var/log/nginx/auth.error.log; - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; - - location / { - set $upstream_authelia http://127.0.0.1:9091; - proxy_pass $upstream_authelia; - client_body_buffer_size 128k; - - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - - send_timeout 5m; - proxy_read_timeout 360; - proxy_send_timeout 360; - proxy_connect_timeout 360; - - proxy_set_header Host $host; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - } - -} -#+end_src - -Next, symlink the file and restart Nginx. If there are errors, be sure -to resolve those before moving on. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/auth /etc/nginx/sites-enabled/auth -sudo systemctl restart nginx.service -#+end_src - -** Nginx: Protected Domain(s) - -Now that Authelia is accessible externally, you need to configure the -domain you intend to protect with Authelia. In this example, I'm -protecting =teddit.example.com=. - -Similar to the process above, paste the content and update the relevant -variables. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/teddit -#+end_src - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name teddit.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name teddit.example.com; - access_log /var/log/nginx/teddit.access.log; - error_log /var/log/nginx/teddit.error.log; - - add_header X-Content-Type-Options "nosniff"; - add_header X-XSS-Protection "1; mode=block"; - add_header X-Frame-Options "DENY"; - add_header Strict-Transport-Security "max-age=63072000; includeSubDomains"; - add_header Referrer-Policy "no-referrer"; - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; - - location /authelia { - internal; - set $upstream_authelia http://127.0.0.1:9091/api/verify; - proxy_pass_request_body off; - proxy_pass $upstream_authelia; - proxy_set_header Content-Length ""; - - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - client_body_buffer_size 128k; - proxy_set_header Host $host; - proxy_set_header X-Original-URL $scheme://$http_host$request_uri; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $remote_addr; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 4 32k; - - send_timeout 5m; - proxy_read_timeout 240; - proxy_send_timeout 240; - proxy_connect_timeout 240; - } - - location / { - set $upstream_teddit http://127.0.0.1:8686; - proxy_pass $upstream_teddit; - - auth_request /authelia; - auth_request_set $target_url https://$http_host$request_uri; - auth_request_set $user $upstream_http_remote_user; - auth_request_set $email $upstream_http_remote_email; - auth_request_set $groups $upstream_http_remote_groups; - proxy_set_header Remote-User $user; - proxy_set_header Remote-Email $email; - proxy_set_header Remote-Groups $groups; - - error_page 401 =302 https://auth.example.com/?rd=$target_url; - - client_body_buffer_size 128k; - - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - - send_timeout 5m; - proxy_read_timeout 360; - proxy_send_timeout 360; - proxy_connect_timeout 360; - - proxy_set_header Host $host; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection upgrade; - proxy_set_header Accept-Encoding gzip; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - } -} -#+end_src - -Same as before, symlink the file and restart Nginx. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/teddit /etc/nginx/sites-enabled/teddit -sudo systemctl restart nginx.service -#+end_src - -* Results - -When visiting the protected domain, you will now be redirected to your -authentication domain and presented with the Authelia login portal. - -#+caption: Authelia Portal -#+attr_html: :alt A view of the Authelia login page, requiring a username and password. -[[https://img.cleberg.net/blog/20231010-authelia/authelia_portal.webp]] - -Once you've successfully authenticated, you can visit your -authentication domain directly and see that you're currently -authenticated to any domain protected by Authelia. - -#+caption: Authelia Success -#+attr_html: :alt A view of the success page when succesfully authenticated. -[[https://img.cleberg.net/blog/20231010-authelia/authelia_success.webp]] -#+date: <2023-10-15 Sun 00:00:00> -#+title: Alpine Linux SSH Hardening Guide -#+description: Detailed guide to enhance Alpine Linux SSH server security through configuration adjustments and vulnerability mitigation. -#+slug: alpine-ssh-hardening - -* Overview - -This guide follows the standard -[[https://www.ssh-audit.com/hardening_guides.html][ssh-audit]] hardening -guide, tweaked for Alpine Linux. - -* Hardening Guide - -These steps must be performed as root. You can try to use =doas= or -=sudo=, but there may be issues. - -1. Re-generate the RSA and ED25519 keys - -#+begin_src sh -rm /etc/ssh/ssh_host_* -ssh-keygen -t rsa -b 4096 -f /etc/ssh/ssh_host_rsa_key -N "" -ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -N "" -#+end_src - -2. [@2] Remove small Diffie-Hellman moduli - -#+begin_src sh -awk '$5 >= 3071' /etc/ssh/moduli > /etc/ssh/moduli.safe -mv /etc/ssh/moduli.safe /etc/ssh/moduli -#+end_src - -3. [@3] Enable the RSA and ED25519 HostKey directives in the - /etc/ssh/sshd_{config} file - -#+begin_src sh -sed -i 's/^\#HostKey \/etc\/ssh\/ssh_host_\(rsa\|ed25519\)_key$/HostKey \/etc\/ssh\/ssh_host_\1_key/g' /etc/ssh/sshd_config -#+end_src - -4. [@4] Restrict supported key exchange, cipher, and MAC algorithms - -#+begin_src sh -echo -e "\n# Restrict key exchange, cipher, and MAC algorithms, as per sshaudit.com\n# hardening guide.\nKexAlgorithms [email protected],curve25519-sha256,[email protected],diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha256\nCiphers [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr\nMACs [email protected],[email protected],[email protected]\nHostKeyAlgorithms ssh-ed25519,[email protected],[email protected],[email protected],rsa-sha2-512,[email protected],rsa-sha2-256,[email protected]" > /etc/ssh/sshd_config.d/ssh-audit_hardening.conf -#+end_src - -5. [@5] Include the /etc/ssh/sshd_{config}.d directory - -#+begin_src sh -echo -e "Include /etc/ssh/sshd_config.d/*.conf" > /etc/ssh/sshd_config -#+end_src - -6. [@6] Restart OpenSSH server - -#+begin_src sh -rc-service sshd restart -#+end_src - -* Testing SSH - -You can test the results with the =ssh-audit= python script. - -#+begin_src sh -pip3 install ssh-audit -ssh-audit localhost -#+end_src - -If everything succeeded, the results will show as all green. If anything -is yellow, orange, or red, you may need to tweak additional settings. -#+date: <2023-10-17 Tue 00:00:00> -#+title: Self-Hosting Guide: AnonymousOverflow -#+description: Detailed installation and setup instructions for the AnonymousOverflow application using Docker Compose and Nginx reverse proxy. -#+slug: self-hosting-anonymousoverflow - -* Overview - -I recently launched an instance of AnonymousOverflow at -[[https://ao.cleberg.net][ao.cleberg.net]] and wanted to write a brief -post on how easy it is to install with Docker Compose and Nginx. - -This guide uses Ubuntu server, Docker Compose, and Nginx as a reverse -proxy. - -* Installation - -** Docker Compose - -To install AnonymousOverflow, start by creating a directory for the -application and create its =docker-compose.yml= file. - -#+begin_src sh -mkdir ~/anonymousoverflow && cd ~/anonymousoverflow -nano docker-compose.yml -#+end_src - -Within this file, paste the following information. Be sure to change the -=APP_URL=, =JWT_SIGNING_SECRET=, and =ports= to match your needs. - -#+begin_src yaml -version: "3" - -services: - anonymousoverflow: - container_name: "app" - image: "ghcr.io/httpjamesm/anonymousoverflow:release" - environment: - - APP_URL=https://ao.example.com - - JWT_SIGNING_SECRET=secret #pwgen 40 1 - ports: - - "9380:8080" - restart: "always" -#+end_src - -Save and exit the file when complete. You can now launch the container -and access it via your local network. - -#+begin_src sh -sudo docker-compose up -d -#+end_src - -** Nginx Reverse Proxy - -If you want to access this service outside the local network, I -recommend using Nginx as a reverse proxy. - -Let's start by creating a configuration file. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/ao -#+end_src - -Within this file, paste the following content and repace -=ao.example.com= with your URL. You may need to update the SSL -certificate statements if your certificates are in a different location. - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.cleberg\.net$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name ao.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name ao.example.com; - access_log /var/log/nginx/ao.access.log; - error_log /var/log/nginx/ao.error.log; - - add_header X-Content-Type-Options "nosniff"; - add_header X-XSS-Protection "1; mode=block"; - add_header X-Frame-Options "DENY"; - add_header Strict-Transport-Security "max-age=63072000; includeSubDomains"; - add_header Referrer-Policy "no-referrer"; - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; - - location / { - set $upstream_ao http://127.0.0.1:9380; - proxy_pass $upstream_ao; - - proxy_set_header Host $host; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection upgrade; - proxy_set_header Accept-Encoding gzip; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - } -} -#+end_src - -Save and exit the file when complete. On Ubuntu, you will need to -symlink the configuration file before it will be recognized by Nginx. -Once complete, simply restart the web server. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/ao /etc/nginx/sites-enabled/ao -sudo systemctl restart nginx.service -#+end_src - -The website will now be available publicly. Visit -[[https://ao.cleberg.net][my instance]] for an example. -#+date: <2023-11-08 Wed 00:00:00> -#+title: Signal CLI (scli) Installation on Alpine -#+description: Step-by-step instructions for installing the Signal messenger command-line client scli on Alpine Linux with musl libc, including dependencies and configuration. -#+slug: scli - -[[https://github.com/isamert/scli][scli]] is a command-line tool that -allows you to connect to your Signal messenger account. This program -utilizes a two-pane display that shows you chats on the left and the -focused conversation on the right. - -This guide will show you how to install =scli= and its dependencies on -Alpine Linux, which requires some extra work due to musl. - -If you're using a non-musl system, you can likely following the =scli= -README and download the packaged binaries for an easier installation -process. - -* Dependencies - -In order to use =scli=, you need a few dependencies: - -- =openjdk17-jre= - Used as a dependency for the =signal-cli= tool. - Version may vary. -- =signal-cli= - Used as the backbone of the =scli= tool. -- =findutils= - Replaces the standard Busybox version of =xargs=. -- =urwid= - A console user interface library for Python. -- =urwid-readline= - For GNU emacs-like keybinds on the input line. -- =qrencode= - Displays a QR code in the terminal to link the device - using your phone. Not necessary if you're only linking on desktop and - can copy/paste the connection URL. - -Let's start by installing the packages available via Alpine's -repositories. Be sure to install the latest version of =openjdk=. If you -run into Java-related issues, uninstall =openjdk= and install an older -version. - -#+begin_src sh -doas apk add openjdk17-jre findutils qrencode -#+end_src - -Next, let's install =signal-cli=. Be sure to export the version of -=signal-cli= that you want. I use version =0.12.4= below, but that may -be outdated by the time you're reading this. - -#+begin_src sh -export VERSION="0.12.4" -wget https://github.com/AsamK/signal-cli/releases/download/v"${VERSION}"/signal-cli-"${VERSION}".tar.gz -doas tar xf signal-cli-"${VERSION}".tar.gz -C /opt -doas ln -sf /opt/signal-cli-${VERSION}"/bin/signal/cli /usr/local/bin -#+end_src - -Finally, install the =urwid= packages using the Python packaging -utility. - -#+begin_src sh -pip3 install urwid urwid-readline -#+end_src - -* Installation - -Now that we have all of the dependencies we need, we can install =scli=. -Start by simply cloning the repository. - -#+begin_src sh -git clone https://github.com/isamert/scli -#+end_src - -When I cloned this repository on 2023-11-08, I found a bug in the logic -that required a fix. You must edit the =scli= file and replace the one -instance of =RLIMIT_OFILE= with =RLIMIT_NOFILE=. - -#+begin_src sh -cd scli -nano scli -#+end_src - -Once complete, you can move this program to anywhere on your =$PATH=. I -chose the following directory. - -#+begin_src sh -doas mv scli /usr/local/bin/scli -#+end_src - -* Initial Setup - -Now that everything is installed, we can login and configure the client. -Start by generating a connection link. - -#+begin_src sh -signal-cli link -n "YOUR-DEVICE-NICKNAME" | tee >(xargs -L 1 qrencode -t utf8) -#+end_src - -This will generate a connection link and related QR code for you to use -to link the devices together. Once complete, *wait patiently* for the -connection process to finish. - -Once it completes, it will exit and return you to the prompt. From here, -you need to perform an initial =receive= command to start things off. -The =USERNAME= variable should be your phone number, such as -=+15551237890=. - -#+begin_src sh -signal-cli -u USERNAME receive -#+end_src - -Also be sure to test the daemon to ensure it works properly. If no -errors occur, it's working. If you run into errors because you're not -running a DBUS session, see my notes below. - -#+begin_src sh -signal-cli -u USERNAME daemon -#+end_src - -Once the initial reception is complete, you are ready to use =scli=. - -This process will differ depending on your desktop environment (DE). If -you are running a DE, you likely have a DBUS session running already and -can simply launch the program. - -However, if you're like me and running your computer straight on the TTY -without a DE, you'll need to start a DBUS session for this program. - -#+begin_src sh -# If you're not running a DBUS session yet, you need to start one for scli -dbus-run-session -- scli - -# OR - If you're already running a DBUS session, simply run scli -scli -#+end_src - -* Configuration - -Lastly, there are a number of configuration options that you can pass -via the command or in the =~/.config/sclirc= file. See the Github README -for more information on configuration options. - -#+begin_src sh -nano ~/.config/sclirc -#+end_src - -#+begin_src conf -# ~/.config/sclirc - -wrap-at = 80 -enable-notifications = true -#+end_src - -That's it! Following this guide, I have a functional =scli= program that -successfully sends messages to my contacts and myself! -#+date: <2023-12-03 Sun 00:00:00> -#+title: Installing and Configuring NextDNS on Unifi Dream Machine Routers -#+description: Procedural guide for installation and configuration of NextDNS on Unifi Dream Machine devices for network DNS filtering. -#+slug: unifi-nextdns - -* Overview - -I recently installed NextDNS on my Unifi Dream Machine router using the -[[https://github.com/nextdns/nextdns/wiki/UnifiOS][UnifiOS]] wiki page -on NextDNS's GitHub repository. - -As a result of this, I wanted to write down the process in case the wiki -or installer ever gets lost. - -* Wiki - -The following is copied from the wiki page linked above, with one -difference in the =ssh= command. - -Install instructions for Unifi Dream Machine (UDM) standard and pro -routers. - -** Install - -Enable SSH: - -- Go to your unifi admin interface and select your device (not the - controller settings, but the Dream Machine settings) -- Click on "Settings" at the bottom of the page -- Go to the "Advanced" section on the left pan -- Enable SSH -- Set a SSH password - -Connect to your router using =ssh [email protected]= with the -password you configured. - -Run the following command and follow the instructions: - -#+begin_src sh -sh -c 'sh -c "$(curl -sL https://nextdns.io/install)"' -#+end_src - -Note: Queries from the UDM itself won't be routed to NextDNS nor -encrypted due to current system limitation. All traffic from other -devices on then network will. - -** Upgrade - -To upgrade to the last version, simply re-run the installer above. If a -new version is available, the upgrade action will added to the list of -possible actions. - -** Uninstall - -To uninstall, re-run the installer above and select "Remove" in the -menu. - -** Troubleshooting - -If the installation fail, please the installer in debug mode and contact -us at [email protected] with the transcript of the installation: - -#+begin_src sh -sh -c 'DEBUG=1 sh -c "$(curl -sL https://nextdns.io/install)"' -#+end_src - -*** Content Filtering Conflict - -NextDNS CLI and the UDM Content Filtering or the Ad Blocking features -are incompatible. If you want to use NextDNS CLI, please make sure they -are disabled. - -To disable Content Filtering, go to Settings > Network, then for each -network, set the Content Filtering feature to None - -To disable Ad Blocking, go to Settings > Application Firewall. In the -General tab, uncheck the Ad Blocking checkbox. - -*** APT Error - -If you get an apt error as follow: - -#+begin_src sh -E: Failed to fetch http://security.debian.org/dists/stretch/updates/main/binary-arm64/Packages 404 Not Found [IP: 151.101.70.132 80] -#+end_src - -You may try to following: - -#+begin_src sh -sed -i -e 's/deb.debian.org/archive.debian.org/g' \ - -e 's|security.debian.org|archive.debian.org/|g' \ - -e '/stretch-updates/d' /etc/apt/sources.list -#+end_src - -** install.sh - -Here are the contents of the =install.sh= file used above, as of -2023-12-03: - -#+begin_src sh -#!/bin/sh - -main() { - OS=$(detect_os) - GOARCH=$(detect_goarch) - GOOS=$(detect_goos) - NEXTDNS_BIN=$(bin_location) - INSTALL_RELEASE=$(get_release) - - export NEXTDNS_INSTALLER=1 - - log_info "OS: $OS" - log_info "GOARCH: $GOARCH" - log_info "GOOS: $GOOS" - log_info "NEXTDNS_BIN: $NEXTDNS_BIN" - log_info "INSTALL_RELEASE: $INSTALL_RELEASE" - - if [ -z "$OS" ] || [ -z "$GOARCH" ] || [ -z "$GOOS" ] || [ -z "$NEXTDNS_BIN" ] || [ -z "$INSTALL_RELEASE" ]; then - log_error "Cannot detect running environment." - exit 1 - fi - - case "$RUN_COMMAND" in - install|upgrade|uninstall|configure) "$RUN_COMMAND"; exit ;; - esac - - while true; do - CURRENT_RELEASE=$(get_current_release) - log_debug "Start install loop with CURRENT_RELEASE=$CURRENT_RELEASE" - - if [ "$CURRENT_RELEASE" ]; then - if ! is_version_current; then - log_debug "NextDNS is out of date ($CURRENT_RELEASE != $INSTALL_RELEASE)" - menu \ - u "Upgrade NextDNS from $CURRENT_RELEASE to $INSTALL_RELEASE" upgrade \ - c "Configure NextDNS" configure \ - r "Remove NextDNS" uninstall \ - e "Exit" exit - else - log_debug "NextDNS is up to date ($CURRENT_RELEASE)" - menu \ - c "Configure NextDNS" configure \ - r "Remove NextDNS" uninstall \ - e "Exit" exit - fi - else - log_debug "NextDNS is not installed" - menu \ - i "Install NextDNS" install \ - e "Exit" exit - fi - done -} - -install() { - if [ "$(get_current_release)" ]; then - log_info "Already installed" - return - fi - if type=$(install_type); then - log_info "Installing NextDNS..." - log_debug "Using $type install type" - if "install_$type"; then - if [ ! -x "$NEXTDNS_BIN" ]; then - log_error "Installation failed: binary not installed in $NEXTDNS_BIN" - return 1 - fi - configure - post_install - exit 0 - fi - else - return $? - fi -} - -upgrade() { - if [ "$(get_current_release)" = "$INSTALL_RELEASE" ]; then - log_info "Already on the latest version" - return - fi - if type=$(install_type); then - log_info "Upgrading NextDNS..." - log_debug "Using $type install type" - "upgrade_$type" - else - return $? - fi -} - -uninstall() { - if type=$(install_type); then - log_info "Uninstalling NextDNS..." - log_debug "Using $type uninstall type" - "uninstall_$type" - else - return $? - fi -} - -precheck() { - if [ -e "/data/unifi" ] && [ -f "/run/dnsfilter/dnsfilter" ]; then - log_warn "UDM Content Filtering and/or Ad Blocking feature is enabled." - log_warn "Please disable it to use NextDNS." - log_warn "" - log_warn " To disable Content Filtering, go to Settings > Network." - log_warn " For each network, set the Content Filtering feature to None." - log_warn "" - log_warn " To disable Ad Blocking, go to Settings > Application Firewall" - log_warn " In the General tab, uncheck the Ad Blocking checkbox." - log_warn "" - while [ -f "/run/dnsfilter/dnsfilter" ]; do - sleep 1 - done - log_info "Content Filtering feature successfuly disabled." - fi -} - -configure() { - log_debug "Start configure" - precheck - args="" - add_arg() { - for value in $2; do - log_debug "Add arg -$1=$value" - args="$args -$1=$value" - done - } - add_arg_bool_ask() { - arg=$1 - msg=$2 - default=$3 - if [ -z "$default" ]; then - default=$(get_config_bool "$arg") - fi - # shellcheck disable=SC2046 - add_arg "$arg" $(ask_bool "$msg" "$default") - } - # Use profile from now on - add_arg profile "$(get_profile_id)" - - doc "Sending your devices name lets you filter analytics and logs by device." - add_arg_bool_ask report-client-info 'Report device name?' true - - case $(guess_host_type) in - router) - add_arg setup-router true - ;; - unsure) - doc "Accept DNS request from other network hosts." - if [ "$(get_config_bool setup-router)" = "true" ]; then - router_default=true - fi - if [ "$(ask_bool 'Setup as a router?' $router_default)" = "true" ]; then - add_arg setup-router true - fi - ;; - esac - - doc "Make NextDNS CLI cache responses. This improves latency and reduces the amount" - doc "of queries sent to NextDNS." - if [ "$(guess_host_type)" = "router" ]; then - doc "Note that enabling this feature will disable dnsmasq for DNS to avoid double" - doc "caching." - fi - if [ "$(get_config cache-size)" != "0" ]; then - cache_default=true - fi - if [ "$(ask_bool 'Enable caching?' $cache_default)" = "true" ]; then - add_arg cache-size "10MB" - - doc "Instant refresh will force low TTL on responses sent to clients so they rely" - doc "on CLI DNS cache. This will allow changes on your NextDNS config to be applied" - doc "on your LAN hosts without having to wait for their cache to expire." - if [ "$(get_config max-ttl)" = "5s" ]; then - instant_refresh_default=true - fi - if [ "$(ask_bool 'Enable instant refresh?' $instant_refresh_default)" = "true" ]; then - add_arg max-ttl "5s" - fi - fi - - if [ "$(guess_host_type)" != "router" ]; then - doc "Changes DNS settings of the host automatically when NextDNS is started." - doc "If you say no here, you will have to manually configure DNS to 127.0.0.1." - add_arg_bool_ask auto-activate 'Automatically setup local host DNS?' true - fi - # shellcheck disable=SC2086 - asroot "$NEXTDNS_BIN" install $args -} - -post_install() { - println - println "Congratulations! NextDNS is now installed." - println - println "To upgrade/uninstall, run this command again and select the appropriate option." - println - println "You can use the NextDNS command to control the daemon." - println "Here are a few important commands to know:" - println - println "# Start, stop, restart the daemon:" - println "nextdns start" - println "nextdns stop" - println "nextdns restart" - println - println "# Configure the local host to point to NextDNS or not:" - println "nextdns activate" - println "nextdns deactivate" - println - println "# Explore daemon logs:" - println "nextdns log" - println - println "# For more commands, use:" - println "nextdns help" - println -} - -install_bin() { - bin_path=$NEXTDNS_BIN - if [ "$1" ]; then - bin_path=$1 - fi - log_debug "Installing $INSTALL_RELEASE binary for $GOOS/$GOARCH to $bin_path" - case "$INSTALL_RELEASE" in - ,*/*) - # Snapshot - branch=${INSTALL_RELEASE%/*} - hash=${INSTALL_RELEASE#*/} - url="https://snapshot.nextdns.io/${branch}/nextdns-${hash}_${GOOS}_${GOARCH}.tar.gz" - ;; - ,*) - url="https://github.com/nextdns/nextdns/releases/download/v${INSTALL_RELEASE}/nextdns_${INSTALL_RELEASE}_${GOOS}_${GOARCH}.tar.gz" - ;; - esac - log_debug "Downloading $url" - asroot mkdir -p "$(dirname "$bin_path")" && - curl -sL "$url" | asroot sh -c "tar Ozxf - nextdns > "$bin_path"" && - asroot chmod 755 "$bin_path" -} - -upgrade_bin() { - tmp=$NEXTDNS_BIN.tmp - if install_bin "$tmp"; then - asroot "$NEXTDNS_BIN" uninstall - asroot mv "$tmp" "$NEXTDNS_BIN" - asroot "$NEXTDNS_BIN" install - fi - log_debug "Removing spurious temporary install file" - asroot rm -rf "$tmp" -} - -uninstall_bin() { - asroot "$NEXTDNS_BIN" uninstall - asroot rm -f "$NEXTDNS_BIN" -} - -install_rpm() { - asroot curl -Ls https://repo.nextdns.io/nextdns.repo -o /etc/yum.repos.d/nextdns.repo && - asroot yum install -y nextdns -} - -upgrade_rpm() { - asroot yum update -y nextdns -} - -uninstall_rpm() { - asroot yum remove -y nextdns -} - -install_zypper() { - if asroot zypper repos | grep -q nextdns >/dev/null; then - echo "Repository nextdns already exists. Skipping adding repository..." - else - asroot zypper ar -f -r https://repo.nextdns.io/nextdns.repo nextdns - fi - asroot zypper refresh && asroot zypper in -y nextdns -} - -upgrade_zypper() { - asroot zypper up nextdns -} - -uninstall_zypper() { - asroot zypper remove -y nextdns - case $(ask_bool 'Do you want to remove the repository from the repositories list?' true) in - true) - asroot zypper removerepo nextdns - ;; - esac -} - -install_deb() { - if [ -f /etc/default/ubnt-dpkg-cache ]; then - # On UnifiOS 2, make sure the package is persisted over upgrades - sed -e '/^DPKG_CACHE_UBNT_PKGS+=" nextdns"/{:a;n;ba;q}' \ - -e '$aDPKG_CACHE_UBNT_PKGS+=" nextdns"' \ - -i /etc/default/ubnt-dpkg-cache - fi - - install_deb_keyring && - asroot sh -c 'echo "deb [signed-by=/etc/apt/keyrings/nextdns.gpg] https://repo.nextdns.io/deb stable main" > /etc/apt/sources.list.d/nextdns.list' && - (dpkg --compare-versions $(dpkg-query --showformat='${Version}' --show apt) ge 1.1 || - asroot ln -s /etc/apt/keyrings/nextdns.gpg /etc/apt/trusted.gpg.d/.) && - (test "$OS" = "debian" && asroot apt-get -y install apt-transport-https || true) && - asroot apt-get update && - asroot apt-get install -y nextdns -} - -install_deb_keyring() { - # Fallback on curl, some debian based distrib don't have wget while debian - # doesn't have curl by default. - asroot mkdir -p /etc/apt/keyrings - ( asroot wget -qO /etc/apt/keyrings/nextdns.gpg https://repo.nextdns.io/nextdns.gpg || - asroot curl -sfL https://repo.nextdns.io/nextdns.gpg -o /etc/apt/keyrings/nextdns.gpg ) && - asroot chmod 0644 /etc/apt/keyrings/nextdns.gpg -} - -upgrade_deb() { - install_deb_keyring && - asroot apt-get update && - asroot apt-get install -y nextdns -} - -uninstall_deb() { - asroot apt-get remove -y nextdns -} - -install_apk() { - repo=https://repo.nextdns.io/apk - asroot wget -O /etc/apk/keys/nextdns.pub https://repo.nextdns.io/nextdns.pub && - (grep -v $repo /etc/apk/repositories; echo $repo) | asroot tee /etc/apk/repositories >/dev/null && - asroot apk update && - asroot apk add nextdns -} - -upgrade_apk() { - asroot apk update && asroot apk upgrade nextdns -} - -uninstall_apk() { - asroot apk del nextdns -} - -install_arch() { - asroot pacman -Sy yay && - yay -Sy nextdns -} - -upgrade_arch() { - yay -Suy nextdns -} - -uninstall_arch() { - asroot pacman -R nextdns -} - -install_merlin_path() { - # Add next to Merlin's path - mkdir -p /tmp/opt/sbin - ln -sf "$NEXTDNS_BIN" /tmp/opt/sbin/nextdns -} - -install_merlin() { - if install_bin; then - install_merlin_path - fi -} - -uninstall_merlin() { - uninstall_bin - rm -f /tmp/opt/sbin/nextdns -} - -upgrade_merlin() { - if upgrade_bin; then - install_merlin_path - fi -} - -install_openwrt() { - opkg update && - opkg install nextdns - rt=$? - if [ $rt -eq 0 ]; then - case $(ask_bool 'Install the GUI?' true) in - true) - opkg install luci-app-nextdns - rt=$? - ;; - esac - fi - return $rt -} - -upgrade_openwrt() { - opkg update && - opkg upgrade nextdns -} - -uninstall_openwrt() { - opkg remove nextdns -} - -install_ddwrt() { - if [ "$(nvram get enable_jffs2)" = "0" ]; then - log_error "JFFS support not enabled" - log_info "To enabled JFFS:" - log_info " 1. On the router web page click on Administration." - log_info " 2. Scroll down until you see JFFS2 Support section." - log_info " 3. Click Enable JFFS." - log_info " 4. Click Save." - log_info " 5. Wait couple seconds, then click Apply." - log_info " 6. Wait again. Go back to the Enable JFFS section, and enable Clean JFFS." - log_info " 7. Do not click Save. Click Apply instead." - log_info " 8. Wait till you get the web-GUI back, then disable Clean JFFS again." - log_info " 9. Click Save." - log_info "10. Relaunch this installer." - exit 1 - fi - mkdir -p /jffs/nextdns && - openssl_get https://curl.haxx.se/ca/cacert.pem | http_body > /jffs/nextdns/ca.pem && - install_bin -} - -upgrade_ddwrt() { - upgrade_bin -} - -uninstall_ddwrt() { - uninstall_bin - rm -rf /jffs/nextdns -} - -install_brew() { - silent_exec brew install nextdns/tap/nextdns -} - -upgrade_brew() { - silent_exec brew upgrade nextdns/tap/nextdns - asroot "$NEXTDNS_BIN" install -} - -uninstall_brew() { - silent_exec brew uninstall nextdns/tap/nextdns -} - -install_freebsd() { - # TODO: port install - install_bin -} - -upgrade_freebsd() { - # TODO: port upgrade - upgrade_bin -} - -uninstall_freebsd() { - # TODO: port uninstall - uninstall_bin -} - -install_pfsense() { - # TODO: port install + UI - install_bin -} - -upgrade_pfsense() { - # TODO: port upgrade - upgrade_bin -} - -uninstall_pfsense() { - # TODO: port uninstall - uninstall_bin -} - -install_opnsense() { - # TODO: port install + UI - install_bin -} - -upgrade_opnsense() { - # TODO: port upgrade - upgrade_bin -} - -uninstall_opnsense() { - # TODO: port uninstall - uninstall_bin -} - -ubios_install_source() { - echo "deb [signed-by=/etc/apt/keyrings/nextdns.gpg] https://repo.nextdns.io/deb stable main" > /data/nextdns.list - podman exec unifi-os mv /data/nextdns.list /etc/apt/sources.list.d/nextdns.list - rm -f /tmp/nextdns.list - podman exec unifi-os apt-get install -y gnupg1 curl - podman exec unifi-os mkdir -p /etc/apt/keyrings/ - podman exec unifi-os curl -sfL https://repo.nextdns.io/nextdns.gpg -o /etc/apt/keyrings/nextdns.gpg - podman exec unifi-os apt-get update -o Dir::Etc::sourcelist="sources.list.d/nextdns.list" -o Dir::Etc::sourceparts="-" -o APT::Get::List-Cleanup="0" -} - -install_ubios() { - ubios_install_source - podman exec unifi-os apt-get install -y nextdns -} - -upgrade_ubios() { - ubios_install_source - podman exec unifi-os apt-get install --only-upgrade -y nextdns -} - -uninstall_ubios() { - podman exec unifi-os apt-get remove -y nextdns -} - -install_ubios_snapshot() { - branch=${INSTALL_RELEASE%/*} - hash=${INSTALL_RELEASE#*/} - url="https://snapshot.nextdns.io/${branch}/nextdns-${hash}_${GOOS}_${GOARCH}.tar.gz" - podman exec unifi-os sh -c "curl -o- $url | tar Ozxf - nextdns > /usr/bin/nextdns; /usr/bin/nextdns install" -} - -upgrade_ubios_snapshot() { - /data/nextdns uninstall - install_ubios_snapshot -} - -install_type() { - if [ "$FORCE_INSTALL_TYPE" ]; then - echo "$FORCE_INSTALL_TYPE"; return 0 - fi - case "$INSTALL_RELEASE" in - ,*/*) - case $OS in - ubios) - echo "ubios_snapshot"; return 0 - ;; - ,*) - # Snapshot mode always use binary install - echo "bin"; return 0 - ;; - esac - esac - case $OS in - centos|fedora|rhel) - echo "rpm" - ;; - opensuse-tumbleweed|opensuse-leap|opensuse) - echo "zypper" - ;; - debian|ubuntu|elementary|raspbian|linuxmint|pop|neon|sparky|vyos|Deepin) - echo "deb" - ;; - alpine) - echo "apk" - ;; - arch|manjaro|steamos) - #echo "arch" # TODO: fix AUR install - echo "bin" - ;; - openwrt) - # shellcheck disable=SC1091 - . /etc/os-release - major=$(echo "$VERSION_ID" | cut -d. -f1) - case $major in - ,*[!0-9]*) - if [ "$VERSION_ID" = "19.07.0-rc1" ]; then - # No opkg support before 19.07.0-rc2 - echo "bin" - else - # Likely 'snapshot' build in this case, but still > major version 19 - echo "openwrt" - fi - ;; - ,*) - if [ "$major" -lt 19 ]; then - # No opkg support before 19.07.0-rc2 - echo "bin" - else - echo "openwrt" - fi - ;; - esac - ;; - asuswrt-merlin) - echo "merlin" - ;; - edgeos|synology|clear-linux-os|solus|openbsd|netbsd|overthebox) - echo "bin" - ;; - ddwrt) - echo "ddwrt" - ;; - darwin) - if [ -x /usr/local/bin/brew ] || [ -x /opt/homebrew/bin/brew ]; then - echo "brew" - else - log_debug "Homebrew not installed, fallback on binary install" - echo "bin" - fi - ;; - freebsd) - echo "freebsd" - ;; - pfsense) - echo "pfsense" - ;; - opnsense) - echo "opnsense" - ;; - ubios) - echo "ubios" - ;; - gentoo) - echo "bin" - ;; - void) - # TODO: pkg for xbps - echo "bin" - ;; - ,*) - log_error "Unsupported installation for $(detect_os)" - return 1 - ;; - esac -} - -get_config() { - "$NEXTDNS_BIN" config | grep -E "^$1 " | cut -d' ' -f 2 -} - -get_config_bool() { - val=$(get_config "$1") - case $val in - true|false) - echo "$val" - ;; - esac - echo "$2" -} - -get_profile_id() { - log_debug "Get profile ID" - if [ "$CONFIG_ID" ]; then - # backward compat - PROFILE_ID="$CONFIG_ID" - fi - while [ -z "$PROFILE_ID" ]; do - default= - prev_id=$(get_config profile) - if [ -z "$prev_id" ]; then - # backward compat - prev_id=$(get_config config) - fi - if [ "$prev_id" ]; then - log_debug "Previous profile ID: $prev_id" - default=" (default=$prev_id)" - fi - print "NextDNS Profile ID%s: " "$default" - read -r id - if [ -z "$id" ]; then - id=$prev_id - fi - if echo "$id" | grep -qE '^[0-9a-f]{6}$'; then - PROFILE_ID=$id - break - else - log_error "Invalid profile ID." - println - println "ID format is 6 alphanumerical lowercase characters (example: 123abc)." - println "Your ID can be found on the Setup tab of https://my.nextdns.io." - println - fi - done - echo "$PROFILE_ID" -} - -log_debug() { - if [ "$DEBUG" = "1" ]; then - printf "\033[30;1mDEBUG: %s\033[0m\n" "$*" >&2 - fi -} - -log_info() { - printf "INFO: %s\n" "$*" >&2 -} - -log_warn() { - printf "\033[33mWARN: %s\033[0m\n" "$*" >&2 -} - -log_error() { - printf "\033[31mERROR: %s\033[0m\n" "$*" >&2 -} - -print() { - format=$1 - if [ $# -gt 0 ]; then - shift - fi - # shellcheck disable=SC2059 - printf "$format" "$@" >&2 -} - -println() { - format=$1 - if [ $# -gt 0 ]; then - shift - fi - # shellcheck disable=SC2059 - printf "$format\n" "$@" >&2 -} - -doc() { - # shellcheck disable=SC2059 - printf "\033[30;1m%s\033[0m\n" "$*" >&2 -} - -menu() { - while true; do - n=0 - default= - for item in "$@"; do - case $((n%3)) in - 0) - key=$item - if [ -z "$default" ]; then - default=$key - fi - ;; - 1) - echo "$key) $item" - ;; - esac - n=$((n+1)) - done - print "Choice (default=%s): " "$default" - read -r choice - if [ -z "$choice" ]; then - choice=$default - fi - n=0 - for item in "$@"; do - case $((n%3)) in - 0) - key=$item - ;; - 2) - if [ "$key" = "$choice" ]; then - if ! "$item"; then - log_error "$item: exit $?" - fi - break 2 - fi - ;; - esac - n=$((n+1)) - done - echo "Invalid choice" - done -} - -ask_bool() { - msg=$1 - default=$2 - case $default in - true) - msg="$msg [Y|n]: " - ;; - false) - msg="$msg [y|N]: " - ;; - ,*) - msg="$msg (y/n): " - esac - while true; do - print "%s" "$msg" - read -r answer - if [ -z "$answer" ]; then - answer=$default - fi - case $answer in - y|Y|yes|YES|true) - echo "true" - return 0 - ;; - n|N|no|NO|false) - echo "false" - return 0 - ;; - ,*) - echo "Invalid input, use yes or no" - ;; - esac - done -} - -detect_endiannes() { - if ! hexdump /dev/null 2>/dev/null; then - # Some firmwares do not contain hexdump, for those, try to detect endianness - # differently. - case $(cat /proc/cpuinfo) in - ,*BCM5300*) - # RT-AC66U does not support Merlin version over 380.70 which - # lacks hexdump command. - echo "le" - ;; - ,*) - log_error "Cannot determine endianness" - return 1 - ;; - esac - return 0 - fi - case $(hexdump -s 5 -n 1 -e '"%x"' /bin/sh | head -c1) in - 1) - echo "le" - ;; - 2) - echo "" - ;; - esac -} - -detect_goarch() { - if [ "$FORCE_GOARCH" ]; then - echo "$FORCE_GOARCH"; return 0 - fi - case $(uname -m) in - x86_64|amd64) - echo "amd64" - ;; - i386|i686) - echo "386" - ;; - arm) - # FreeBSD does not include arm version - case "$(sysctl -b hw.model 2>/dev/null)" in - ,*A9*) - echo "armv7" - ;; - ,*) - # Unknown version, fallback to the lowest - echo "armv5" - ;; - esac - ;; - armv5*) - echo "armv5" - ;; - armv6*|armv7*) - if grep -q vfp /proc/cpuinfo 2>/dev/null; then - echo "armv$(uname -m | sed -e 's/[[:alpha:]]//g')" - else - # Soft floating point - echo "armv5" - fi - ;; - aarch64) - case "$(uname -o 2>/dev/null)" in - ASUSWRT-Merlin*) - # XXX when using arm64 build on ASUS AC66U and ACG86U, we get Go error: - # "out of memory allocating heap arena metadata". - echo "armv7" - ;; - ,*) - echo "arm64" - ;; - esac - ;; - armv8*|arm64) - echo "arm64" - ;; - mips*) - # TODO: detect hardfloat - echo "$(uname -m)$(detect_endiannes)_softfloat" - ;; - ,*) - log_error "Unsupported GOARCH: $(uname -m)" - return 1 - ;; - esac -} - -detect_goos() { - if [ "$FORCE_GOOS" ]; then - echo "$FORCE_GOOS"; return 0 - fi - case $(uname -s) in - Linux) - echo "linux" - ;; - Darwin) - echo "darwin" - ;; - FreeBSD) - echo "freebsd" - ;; - NetBSD) - echo "netbsd" - ;; - OpenBSD) - echo "openbsd" - ;; - ,*) - log_error "Unsupported GOOS: $(uname -s)" - return 1 - esac -} - -detect_os() { - if [ "$FORCE_OS" ]; then - echo "$FORCE_OS"; return 0 - fi - case $(uname -s) in - Linux) - case $(uname -o) in - GNU/Linux|Linux) - if grep -q -e '^EdgeRouter' -e '^UniFiSecurityGateway' /etc/version 2> /dev/null; then - echo "edgeos"; return 0 - fi - if uname -u 2>/dev/null | grep -q '^synology'; then - echo "synology"; return 0 - fi - # shellcheck disable=SC1091 - dist=$(. /etc/os-release; echo "$ID") - case $dist in - ubios) - if [ -z "$(command -v podman)" ]; then - log_error "This version of UnifiOS is not supported. Make sure you run version 1.7.0 or above." - return 1 - fi - echo "$dist"; return 0 - ;; - debian|ubuntu|elementary|raspbian|centos|fedora|rhel|arch|manjaro|openwrt|clear-linux-os|linuxmint|opensuse-tumbleweed|opensuse-leap|opensuse|solus|pop|neon|overthebox|sparky|vyos|void|alpine|Deepin|gentoo|steamos) - echo "$dist"; return 0 - ;; - esac - # shellcheck disable=SC1091 - for dist in $(. /etc/os-release; echo "$ID_LIKE"); do - case $dist in - debian|ubuntu|rhel|fedora|openwrt) - log_debug "Using ID_LIKE" - echo "$dist"; return 0 - ;; - esac - done - ;; - ASUSWRT-Merlin*) - echo "asuswrt-merlin"; return 0 - ;; - DD-WRT) - echo "ddwrt"; return 0 - esac - ;; - Darwin) - echo "darwin"; return 0 - ;; - FreeBSD) - if [ -f /etc/platform ]; then - case $(cat /etc/platform) in - pfSense) - echo "pfsense"; return 0 - ;; - esac - fi - if [ -x /usr/local/sbin/opnsense-version ]; then - case $(/usr/local/sbin/opnsense-version -N) in - OPNsense) - echo "opnsense"; return 0 - ;; - esac - fi - echo "freebsd"; return 0 - ;; - NetBSD) - echo "netbsd"; return 0 - ;; - OpenBSD) - echo "openbsd"; return 0 - ;; - ,*) - esac - log_error "Unsupported OS: $(uname -o) $(grep ID "/etc/os-release" 2>/dev/null | xargs)" - return 1 -} - -guess_host_type() { - if [ -d /data/unifi ]; then - # Special case when installer is run from inside the ubios podman - echo "router"; return 0 - fi - - case $OS in - pfsense|opnsense|openwrt|asuswrt-merlin|edgeos|ddwrt|synology|overthebox|ubios) - echo "router" - ;; - darwin|steamos) - echo "workstation" - ;; - ,*) - echo "unsure" - ;; - esac -} - -asroot() { - # Some platform (Merlin) do not have the "id" command and $USER report a non root username with uid 0. - if [ "$(grep '^Uid:' /proc/$$/status 2>/dev/null|cut -f2)" = "0" ] || [ "$USER" = "root" ] || [ "$(id -u 2>/dev/null)" = "0" ]; then - "$@" - elif [ "$(command -v sudo 2>/dev/null)" ]; then - sudo "$@" - else - echo "Root required" - su -m root -c "$*" - fi -} - -silent_exec() { - if [ "$DEBUG" = 1 ]; then - "$@" - else - if ! out=$("$@" 2>&1); then - rt=$? - println "\033[30;1m%s\033[0m" "$out" - return $rt - fi - fi -} - -bin_location() { - case $OS in - centos|fedora|rhel|debian|ubuntu|elementary|raspbian|arch|manjaro|clear-linux-os|linuxmint|opensuse-tumbleweed|opensuse-leap|opensuse|solus|pop|neon|sparky|vyos|void|alpine|Deepin|gentoo) - echo "/usr/bin/nextdns" - ;; - openwrt|overthebox) - echo "/usr/sbin/nextdns" - ;; - synology) - echo "/usr/local/bin/nextdns" - ;; - darwin) - echo "$(brew --prefix 2>/dev/null || echo /usr/local)/bin/nextdns" - ;; - asuswrt-merlin|ddwrt) - echo "/jffs/nextdns/nextdns" - ;; - freebsd|pfsense|opnsense|netbsd|openbsd) - echo "/usr/local/sbin/nextdns" - ;; - edgeos) - echo "/config/nextdns/nextdns" - ;; - ubios) - echo "/data/nextdns" - ;; - steamos) - echo "$HOME/.local/bin/nextdns" - ;; - ,*) - log_error "Unknown bin location for $OS" - ;; - esac -} - -is_version_current() { - case "$INSTALL_RELEASE" in - ,*/*) - # Snapshot - hash=${INSTALL_RELEASE#*/} - test "0.0.0-$hash" = "$CURRENT_RELEASE" - ;; - ,*) - test "$INSTALL_RELEASE" = "$CURRENT_RELEASE" - ;; - esac -} - -get_current_release() { - if [ -x "$NEXTDNS_BIN" ]; then - $NEXTDNS_BIN version|cut -d' ' -f 3 - fi -} - -get_release() { - if [ "$NEXTDNS_VERSION" ]; then - echo "$NEXTDNS_VERSION" - else - for cmd in curl wget openssl true; do - # command is the "right" way but may be compiled out of busybox shell - ! command -v $cmd > /dev/null 2>&1 || break - ! which $cmd > /dev/null 2>&1 || break - done - case "$cmd" in - curl) cmd="curl -A curl -s" ;; - wget) cmd="wget -qO- -U curl" ;; - openssl) cmd="openssl_get" ;; - ,*) - log_error "Cannot retrieve latest version" - return - ;; - esac - v=$($cmd "https://api.github.com/repos/nextdns/nextdns/releases/latest" | \ - grep '"tag_name":' | esed 's/.*"([^"]+)".*/\1/' | sed -e 's/^v//') - if [ -z "$v" ]; then - log_error "Cannot get latest version: $out" - fi - echo "$v" - fi -} - -esed() { - if (echo | sed -E '' >/dev/null 2>&1); then - sed -E "$@" - else - sed -r "$@" - fi -} - -http_redirect() { - while read -r header; do - case $header in - Location:*) - echo "${header#Location: }" - return - ;; - esac - if [ "$header" = "" ]; then - break - fi - done - cat > /dev/null - return 1 -} - -http_body() { - sed -n '/^\r/,$p' | sed 1d -} - -openssl_get() { - host=${1#https://*} # https://dom.com/path -> dom.com/path - path=/${host#*/} # dom.com/path -> /path - host=${host%$path} # dom.com/path -> dom.com - printf "GET %s HTTP/1.0\nHost: %s\nUser-Agent: curl\n\n" "$path" "$host" | - openssl s_client -quiet -connect "$host:443" 2>/dev/null -} - -umask 0022 -main -#+end_src -#+date: <2024-01-08 Mon 00:00:00> -#+title: Don't Say Hello -#+description: Technical recommendations for improving professional communication by eliminating non-essential introductory phrases to enhance message clarity. -#+slug: dont-say-hello - -I recently came back from a winter break and have started working again... only -to immediately run into the dilemma of people sending me cliffhanger messages -again. - -* No Hello - -A year or two ago, I discovered [[https://nohello.net/en/][no hello]] and have thought about it often since -then. I've even sent it to a few people since then (who wouldn't take offense to -it). - -I work in a fast-paced environment where efficiency is extremely valuable. -Therefore, I have always held a deep displeasure for conversations where people -start with "Hello" and then. - -I searched back through my work messages and found that I received ~50 messages -from ~10 people last year from people that contained "hi", "hey", or "hello" and -did not contain any indication of the purpose of the conversation. I also -noticed that a few of the users were responsible for the large majority of the -cliffhangers. - -There's no real point to this post, just a desparate request for people to -please stop doing this. -#+date: <2024-01-09 Tue 00:00:00> -#+title: A Guide to Customizing macOS with Terminal, Window Managers, and Widgets -#+description: Detailed overview of methods and tools for modifying macOS system settings, including terminal usage, window management, and interface customization. -#+slug: macos-customization - -I have been using macOS more than Linux lately, so I wrote this post to describe -some simple options to customize macOS beyond the normal built-in settings menu. - -While not all-encompassing, the options below should be a good start for anyone -looking to dive down the rabbit hole. - -* Basics - -** Package Management - -To install a lot of software on macOS, you will need [[https://brew.sh/][Homebrew]]. You can use their -installation script to get started. Simply open the =Terminal= application and -paste the following snippet: - -#+begin_src sh -/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" -#+end_src - -This will allow you to easily install and manage applications and other software -easily through the =brew= command. - -** Terminal - -If you're serious about customizing your macOS system, I highly recommend -installing a terminal emulator that you like and if you're not comfortable on -the command line yet, start learning. A lot of customization options require you -to edit hidden files, which is easiest in a terminal. - -There are options like iTerm2, Kitty, Alacritty, Hyper, Warp, or the built-in -Terminal app. - -I use [[https://iterm2.com/][iTerm2]], which can be installed with Homebrew: - -#+begin_src sh -brew install iterm2 -#+end_src - -To install color schemes, such as the Dracula scheme, you visit [[https://iterm2colorschemes.com/][iTerm Themes]] and -follow their installation instructions to install any of the themes. - -* Desktop - -** Window Management - -[[https://github.com/koekeishiya/yabai][yabai]] is a tiling window manager for macOS. While other window managers exist, I -found that most of them struggled to create logical layouts and to allow me to -easily move windows around the screen. - -Some advanced settings for yabai are only available if partially disable System -Integrity Protection (SIP). However, I chose not to do this and it hasn't -affected my basic usage of yabai at all. - -Refer to the [[https://github.com/koekeishiya/yabai/wiki/Installing-yabai-(latest-release)][yabai wiki]] for installation instructions. You will need to ensure -that yabai is allowed to access the accessibility and screen recording APIs. - -** Keyboard Shortcuts - -[[https://github.com/koekeishiya/skhd][skhd]] is a simple hotkey daemon that allows you to define hotkeys in a file for -usage on your system. - -Installation is simple: - -#+begin_src sh -brew install koekeishiya/formulae/skhd -skhd --start-service -#+end_src - -After installation, be sure to allow =skhd= access to the accessibility API in -the macOS privacy settings. - -You can configure your hotkeys in the =~/.config/skhd/skhdrc= file: - -#+begin_src sh -nano ~/.config/skhd/skhdrc -#+end_src - -For example, I have hotkeys to open my browser and terminal: - -#+begin_src conf -# Terminal -cmd - return : /Applications/iTerm.app/Contents/MacOS/iTerm2 - -# Browser -cmd + shift - return : /Applications/LibreWolf.app/Contents/MacOS/librewolf -#+end_src - -** Widgets - -[[https://github.com/felixhageloh/uebersicht/][uebersicht]] is a handy desktop-based widget tool with a plethora of -community-made widgets available in the [[https://tracesof.net/uebersicht-widgets/][widgets gallery]]. You can also write your -own widgets with this tool. - -To install, simply download the latest release from the [[https://tracesof.net/uebersicht/][uebersicht website]] and -copy it to the Applications folder. - -See below for an example of the [[https://tracesof.net/uebersicht-widgets/#Mond][Mond]] widget in action. - -** Status Bar - -[[https://github.com/FelixKratz/SketchyBar][SketchyBar]] is a customizable replacement for the macOS status or menu bar. - -You can browse a discussion where various users shared their [[https://github.com/FelixKratz/SketchyBar/discussions/47?sort=top][configurations]] for -inspiration or to copy their dotfiles. - -** Dock - -The easiest way to customize the dock is to install [[https://ubarapp.com/][uBar]], which uses a -Windows-like menu bar as the default style. - -However, the built-in macOS dock cannot be disabled and can only be set to -"always hidden". This can be annoying as it will pop out any time your mouse -cursor passes closely to the dock edge of the screen. Because of this, I simply -use the built-in dock instead of customizing it with third-party software. - -Regardless, see below for the default installation style of uBar. - -** Application Icons - -You can also customize the icon of any application in macOS, which will show up -in Finder, the Dock, Launchpad, search results, etc. I recommend using -[[https://macosicons.com/][macOSicons]] to download icons you want, and then apply them by following this -process. - -1. Open the Finder application. -2. Navigate to the =Applications= folder. -3. Right-click an application of your choice, and select =Get Info=. -4. Drag the image you downloaded on top of the application's icon at the top of - information window (you will see a green "plus" symbol when you're hovering - over it). -5. Release the new icon on top of the old icon and it will update! -#+date: <2024-01-13 Sat 00:00:00> -#+title: Running Local Large Language Models on macOS and iOS: A Practical Guide -#+description: Technical guide to deploying and running local large language models on macOS and iOS devices focusing on open-source implementations and privacy considerations. -#+slug: local-llm - -* Requirements - -I've recently started playing with large language models (LLMs), mostly in the -popular chatbot form, as part of my job and have decided to see if there's a -consistent and reliable way to interact with these models on Apple devices -without sacrificing privacy or requiring in-depth technical setup. - -My requirements for this test: - -- Open source platform -- On-device model files -- Minimal required configuration -- Preferably pre-built, but a simple build process is acceptable - -I tested a handful of apps and have summarized my favorite (so far) for macOS -and iOS below. - -#+begin_quote -TL;DR - Here are the two that met my requirements and I have found the easiest -to install and use so far: -#+end_quote - -- macOS: [[https://ollama.ai/][Ollama]] -- iOS : [[https://llmfarm.site/][LLM Farm]] - -* macOS - -[[https://ollama.ai/][Ollama]] is a simple Go application for macOS and Linux that can run various LLMs -locally. - -For macOS, you can download the pplication on the [[https://ollama.ai/download/mac][Ollama download page]] and -install it by unzipping the =Ollama.app= file and moving it to the -=Applications= folder. - -If you prefer the command line, you can run these commands after the -download finished: - -#+begin_src sh -cd ~/Downloads && \ -unzip Ollama-darwin.zip && \ -mv ~/Downloads/Ollama.app /Applications/ -#+end_src - -After running the app, the app will ask you to open a terminal and run the -default =llama2= model, which will open an interactive chat session in the -terminal. You can startfully using the application at this point. - -If you don't want to use the default =llama2= model, you can download and run -additional models found on the [[https://ollama.ai/library][Models]] page. - -To see the information for the currently-used model, you can run the -=/show info= command in the chat. - -** Community Integrations - -I highly recommend browsing the [[https://github.com/jmorganca/ollama#community-integrations][Community Integrations]] section of the project to -see how you would prefer to extend Ollama beyond a simple command-line -interface. There are options for APIs, browser UIs, advanced terminal -configurations, and more. - -* iOS - -While there are a handful of decent macOS options, it was quite difficult to -find an iOS app that offered an open source platform without an extensive -configuration and building process. I found LLM Farm to be decent enough in -quality to sit at the top of my list - however, it's definitely not user -friendly enough for me to consider using it on a daily basis. - -[[https://llmfarm.site/][LLM Farm]] is available on TestFlight, so there's no manual build process -required. However, you can view the [[https://github.com/guinmoon/LLMFarm][LLMFarm repository]] if you wish. - -The caveat is that you will have to manually download the model files from the -links in the [[https://github.com/guinmoon/LLMFarm/blob/main/models.md][models.md]] file to your iPhone to use the app - there's currently no -option in the app to reach out and grab the latest version of any supported -model. - -Once you have a file downloaded, you simply create a new chat and select the -downloaded model file and ensure the inference matches the requirement in the -=models.md= file. - -[[https://github.com/AugustDev/enchanted][Enchanted]] is also an iOS for private AI models, but it requires a public-facing -Ollama API, which did not meet my "on device requirement." Nonetheless, it's an -interesting looking app and I will likely set it up to test soon. -#+date: <2024-01-26 Fri 00:00:00> -#+title: Building an Interactive Audit Dashboard with Alteryx and Power BI -#+description: Instructions for transforming audit data into dynamic dashboards via data preparation with Alteryx and visualization using Microsoft Power BI. -#+slug: audit-dashboard - -Alteryx and Power BI are powerful tools that can help turn your old-school audit -trackers into interactive tools that provide useful insights and potential -action plans. - -With these tools, we are going to build a dashboard that can effectively -communicate project status. - -* Requirements - -This project assumes the following: - -- You have access to Alteryx Designer and Power BI Desktop. - - If you only have Power BI Desktop, you may need to perform some analysis in - Power BI instead of Alteryx. -- Your data is in a format that can be imported into Alteryx and/or Power BI. -- You have a basic understanding of data types and visualization. - -* Alteryx: Data Preparation & Analysis - -** Import Data - -With Alteryx, importing data is easy with the use of the =Input Data= tool. -Simply drag this tool onto the canvas from the =In/Out= tab in the Ribbon to -create it as a node. - -You can choose the File Format manually or simply connect to your file/database -and let Alteryx determine the format for you. For this example, we will be -importing an Excel file and changing the =Start Data Import on Line= variable to -=2=. - -** Transform Data - -Next, let's replace null data and remove whitespace to clean up our data. We can -do this with the =Data Cleansing= tool in the =Preparation= tab in the Ribbon. - -Ensure that the following options are enabled: - -- Replace Nulls - - Replace with Blanks (String Fields) - - Replace with 0 (Numeric Fields) -- Remove Unwanted Characters - - Leading and Trailing Whitespace - -For our next step, we will transform the date fields from strings to datetime -format. Add a =Datetime= tool for each field you want to transform - in the -example below, I am using the tool twice for the "Started On" and "Submitted On" -fields. - -Now that the dates are in the correct format, let's perform a calculation based -on those fields. Start by adding a =Filter= tool, naming a new Output Column, -and pasting the formula below into it (the two fields used in this formula must -match the output of the =Datetime= tools above): - -```txt -DateTimeDiff([SubmittedOn_Out],[StartedOn_Out], "days") -``` - -** Export Data - -Finalize the process by exporting the transformed data set to a new file, for -use in the following visualization step. - -* Power BI: Data Visualization - -** Import Data - -To start, open the Power BI Desktop application. Upon first use, Power BI will -ask if you want to open an existing dashboard or import new data. - -As we are creating our first dashboard, let's import our data. In my example -below, I'm importing data from the "Tracker" sheet of the Excel file I'm using -for this project. - -During this process, I also imported the export from the Alteryx workflow above. -Therefore, we have two different files available for use in our dashboard. - -** Add Visuals - -To create the dashboard, you will need to follow the list instructions below and -format as needed. - -Instructions to create the visuals above: - -- =Text Box=: Explain the name and purpose of the dashboard. You can also add - images and logos at the top of the dashboard. -- =Donut Chart=: Overall status of the project. - - =Legend=: Status - - =Values=: Count of Status -- =Stacked Column Chart=: Task count by assignee. - - =X-axis=: Preparer - - =Y-axis=: Count of Control ID - - =Legend=: Status -- =Treemap=: Top N client submitters by average days to submit. - - =Details=: Preparer - - =Values=: Sum of Avg_{DaysToSubmit} -- =Line Chart=: Projected vs. actual hours over time. -- =Clustered Bar Chart=: Projected vs. actual hours per person. -- =Slicer & Table= - Upcoming due dates. - - =Slicer=: - - =Values=: Date Due - - =Table=: - - =Columns=: Count of Control ID, Date Due, Preparer, Status - -** Format the Dashboard - -You can choose a theme in the View tab of the Ribbon. You can even browse for -custom JSON files that define themes, such as ones found online or custom ones -created by your organization. - -For each visual, you can click the =Format= button in the =Visualizations= side -pane and explore the options. You can custom options such as: - -- Visual - - Legend - - Colors - - Data labels - - Category labels -- General - - Properties - - Title - - Effects - - Header icons - - Tooltips - - Alt text - -You can always look online for inspiration when trying to decide how best to -organize and style your dashboard. - -* Sharing the Results - -Generally, you have a few different options for sharing your dashboards with -others: - -1. Export the dashboard as a PDF in the file menu of Power BI. This will export - all tabs and visuals as they are set when the export button is pressed. You - will lose all interactivity with this option. -2. Send the full Power BI file to those you wish to share the dashboard. This - will retain all settings and interactivity. However, you will also need to - send the source files if they need to refresh the dashboard and you will need - to re-send the files if you make updates. -3. Store the dashboard in a synced location, such as a shared drive or Microsoft - Teams. Depending on how a user configures their local Windows paths, the data - source paths may not be compatible for all users with such a setup. -#+date: <2024-01-27 Sat 00:00:00> -#+title: Preparing and Visualizing Omaha Crime Data (2015-2023) in Tableau -#+description: Detailed procedure for data preparation and interactive visualization of crime trends in Omaha, using Tableau software from 2015 through 2023 data. -#+slug: tableau-dashboard - -In this project, I am going to show you how to use Tableau Public for free to -create simple dashboards. - -I will be creating simple visuals from an Omaha crime data set and combining -them to create the dashboard below. You can view this dashboard interactively -online here: [[https://public.tableau.com/app/profile/c.c7042/viz/OmahaCrimeData2015-2023/OmahaCrimeData2015-2023#1][Omaha Crime Data (2015 - 2023)]]. - -#+caption: Tableau Dashboard -#+attr_html: :alt A Tableau dashboard showing a map of Omaha with a dot for each crime, a bar chart with totals per crime category, and a line chart showing a timeline of crime totals by month. -[[https://img.cleberg.net/blog/20240127-tableau-dashboard/dashboard.webp]] - -* Gather the Data - -You can download incident data from the Omaha Police Department on their -[[https://police.cityofomaha.org/crime-information/incident-data-download][Incident Data Download]] page. They currently have files for the years 2015 -through 2023. - -Each file will be downloaded as a CSV file, approximately 3 MB - 8 MB. - -* Clean and Transform the Data - -I have used Python to combine the files into a single CSV file, as well as -adding a custom =datetime= column. You could do this step in any software you -prefer, but I prefer Python as its free, easy to use, and has a plethora of -support resources online. - -Start by opening a terminal, navigating to your Downloads directory, and -creating a python script. - -#+begin_src sh -cd ~/Downloads -nano data_processing.py -#+end_src - -Within the Python script, paste the following: - -#+begin_src python -# Import modules -import pandas as pd -import glob -import os - -# Import the data -path = r"~/Downloads/*.csv" -files = glob.glob(path) - -list = [] - -for file in files: - df_tmp = pd.read_csv(file) - li.append(df_tmp) - -df = pd.concat(list, axis=0, ignore_index=True) - -# Create a combined datetime column -df["datetime"] = pd.to_datetime( - df["date"] + " " + df["time"], - format="%m/%d/%Y %H:%M:%S" -) -df.head() - -# Export the combined data -df.to_csv(r"~/Downloads/combined_incidents.csv") -#+end_src - -Once pasted, save and close the file. You can execute the file like so: - -#+begin_src sh -python3 data_processing.py -#+end_src - -After this, you should have a combined data file that contains all incidents -between 2015 and 2023. Mine was approximately 55 MB. - -* Tableau Public - -[[https://public.tableau.com/][Tableau Public]] is a free-to-use web application that allows you to create -visualizations by uploading data sources. Note that there's no way to keep the -data and visualizations private, so don't upload anything private. - -After creating an account, you can click the =Create= > =Web Authoring= link to -create your first visualization. - -** Upload the Data - -Once you've opened your first project, Tableau will ask you to connect to your -data. For this project, click the =Upload from computer= button and select the -CSV file previously combined in the step above. - -Once connected, you can refresh the preview of the data with the =Refresh Data -Source= button in the toolbar. - -If you need to edit any of the data types, column names, etc., you can do so -now. Once complete, generate an extract so that you can start creating -visualizations. - -** Create Visualizations - -To start, create a worksheet in the toolbar at the bottom of the screen. - -Within this screen, select a column from the =Data= side bar on the left and -drag it into the =Columns= or =Rows= area of the canvas. - -See below for the map visualization. You can recreate this by adding the -following fields: - -- =Columns=: Lon -- =Rows=: Lat -- =Marks=: - - Description - - Datetime -- =Filters=: Datetime - -You can repeat this process for each visualization you want to create. Explore -your options by dragging data fields to different areas and by opening the field -options to explore what operations can be performed on different data types -(e.g., average, count, etc.). - -** Create Dashboard - -To create a dashboard, click the button on the toolbar at the bottom of the -screen. Within the dashboard, drag each sheet from the left side bar onto the -dashboard canvas. - -** Formatting - -You can explore a ton of different formatting options throughout the worksheets -and dashboard. Specifically for maps, you can alter the map layers, background, -and visible features through the =Map= menu in the top file menu of the editing -screen. - -In the finished dashboard below, I opted for a dark mode with a map that showed -county lines and city names. - -There's a ton of other options available to be used in a dashboard like this, -but this project shows a quick preview of what you can do in Tableau Public. - -#+caption: Tableau Dashboard -#+attr_html: :alt A Tableau dashboard showing a map of Omaha with a dot for each crime, a bar chart with totals per crime category, and a line chart showing a timeline of crime totals by month. -[[https://img.cleberg.net/blog/20240127-tableau-dashboard/dashboard.webp]] -#+date: <2024-02-06 Tue 00:00:00> -#+title: Creating and Managing ZFS Storage Pools on Ubuntu Linux -#+description: Stepwise guide to setting up ZFS storage pools on Ubuntu, including initial installation, pool creation, expansion, and maintenance. -#+slug: zfs - -This post details the process I used to create ZFS pools, datasets, and -snapshots on Ubuntu Server. - -I found the following pages very helpful while going through this process: - -- [[https://ubuntu.com/tutorials/setup-zfs-storage-pool][Setup a ZFS storage pool]] -- [[https://wiki.ubuntu.com/Kernel/Reference/ZFS][Kernel/Reference/ZFS]] -- [[https://blog.victormendonca.com/2020/11/03/zfs-for-dummies/][ZFS for Dummies]] - -* Installation - -To start, I installed the ZFS package with the following command: - -#+begin_src sh -sudo apt install zfsutils-linux -#+end_src - -Once installed, you can check the version to see if it installed correctly. - -#+begin_src sh -> zsf --version - -zfs-2.1.5-1ubuntu6~22.04.2 -zfs-kmod-2.1.5-1ubuntu6~22.04.1 -#+end_src - -* ZFS Configuration - -Now that ZFS is installed, we can create and configure the pool. - -You have various options for configuring ZFS pools that all come different pros -and cons. I suggest visiting the links at the top of this post or searching -online for the best configuration for your use-case. - -- Striped VDEVs (Raid0) -- Mirrored VDEVs (Raid1) -- Striped Mirrored VDEVs (Raid10) -- RAIDz (Raid5) -- RAIDz2 (Raidd6) -- RAIDz3 -- Nested RAIDz (Raid50, Raid60) - -I will be using Raid10 in this guide. However, the majority of the steps are the -same regardless of your chosen pool configuration. - -** Creating the Pool - -To start, let's list the disks available to use. You can use =fdisk= command to -see all available disks. - -#+begin_src sh -sudo fdisk -l -#+end_src - -Or, if you currently have them mounted, you can use the =df= command to view -your disks. - -#+begin_src sh -> sudo df -h - -Filesystem Size Used Avail Use% Mounted on -... -/dev/sda1 7.3T 28K 6.9T 1% /mnt/red-01 -/dev/sdb1 7.3T 144G 6.8T 3% /mnt/red-02 -/dev/sdc1 7.3T 5.5T 1.9T 75% /mnt/white-02 -/dev/sdd1 9.1T 8.7T 435G 96% /mnt/white-01 -/dev/sde1 7.3T 28K 6.9T 1% /mnt/red-03 -/dev/sdf1 7.3T 28K 6.9T 1% /mnt/red-04 -#+end_src - -If you're going to use mounted disks, make sure to umount them before creating -the pool. - -#+begin_src sh -sudo umount /dev/sda1 -sudo umount /dev/sdb1 -#+end_src - -Now that I've identified the disks I want to use and have them unmounted, let's -create the pool. For this example, I will call it =tank=. - -#+begin_src sh -sudo zpool create -f -m /mnt/pool tank mirror /dev/sda /dev/sdb -#+end_src - -See below for the results of the new ZFS pool named =tank=, with a vdev -automatically named =mirror-0=. - -#+begin_src sh -> zfs list - -NAME USED AVAIL REFER MOUNTPOINT -tank 396K 7.14T 96K /tank -#+end_src - -#+begin_src sh -> zpool status - - pool: tank - state: ONLINE -config: - - NAME STATE READ WRITE CKSUM - tank ONLINE 0 0 0 - mirror-0 ONLINE 0 0 0 - sda ONLINE 0 0 0 - sdb ONLINE 0 0 0 - -errors: No known data errors -#+end_src - -We can also look at the mounted filesystem to see where the pool is mounted and -some quick stats. - -#+begin_src sh -> df -h - -Filesystem Size Used Avail Use% Mounted on -... -tank 7.2T 128K 7.2T 1% /tank -#+end_src - -** Expanding the Pool - -If you want to expand this pool, you will need to add a new VDEV to the pool. -Since I am using 2 disks per VDEV, I will need to add a new 2-disk VDEV to the -existing =tank= pool. - -#+begin_src sh -sudo zpool add tank mirror /dev/sdX /dev/sdY -#+end_src - -If you're adding disks of different sizes, you'll need to use the =-f= flag. -Keep in mind that the max size will be limited to the smallest disk added. - -#+begin_src sh -sudo zpool add -f tank mirror /dev/sdX /dev/sdY -#+end_src - -I added two 8TB hard drives and this process took around 10 seconds to complete. - -When viewing the pool again, you can see that the pool has now doubled in size. -We have 14.3 TB useable space and the same space used for mirroring. - -#+begin_src sh -> zfs list - -NAME USED AVAIL REFER MOUNTPOINT -tank 145G 14.3T 104K /tank -tank/cloud 145G 14.3T 145G /tank/cloud -tank/media 96K 14.3T 96K /tank/media -#+end_src - -*** Converting Disks - -Some disks, such as NTFS-formatted drives, will need to be partitioned and -formatted prior to being added to the pool. - -Start by identifying the disks you want to format and add to the pool. - -#+begin_src sh -sudo fdisk -l | grep /dev -#+end_src - -I am going to format my =/dev/sdc= and =/dev/sdd= disks with the =fdisk= -command. - -See below for instructions on how to use =fdisk=. Here's what I did to create -basic Linux formatted disks: - -- =g= : Create GPT partition table -- =n= : Create a new partition, hit Enter for all default options -- =t= : Change partition type to =20= for =Linux filesystem= -- =w= : Write the changes to disk and exit - -I repeated this process for both disks. - -#+begin_src sh -> sudo fdisk /dev/sdc - -Welcome to fdisk (util-linux 2.37.2). Changes will remain in memory only, until -you decide to write them. Be careful before using the write command. - -This disk is currently in use - repartitioning is probably a bad idea. It's -recommended to umount all file systems, and swapoff all swap partitions on this -disk. - - -Command (m for help): m - -Help: - - GPT - M enter protective/hybrid MBR - - Generic - d delete a partition - F list free unpartitioned space - l list known partition types - n add a new partition - p print the partition table - t change a partition type - v verify the partition table - i print information about a partition - - Misc - m print this menu - x extra functionality (experts only) - - Script - I load disk layout from sfdisk script file - O dump disk layout to sfdisk script file - - Save & Exit - w write table to disk and exit - q quit without saving changes - - Create a new label - g create a new empty GPT partition table - G create a new empty SGI (IRIX) partition table - o create a new empty DOS partition table - s create a new empty Sun partition table -#+end_src - -Once the drives are formatted, we can add these disks to the pool. - -#+begin_src sh -sudo zpool add tank mirror /dev/sdc /dev/sdd -#+end_src - -When we list the pool again, we can see that our size is now updated to -approximately 22TB. This represents my hard drives totalling 45.6TB when shown -with =fdisk -l=, with a Raid10 configuration using 22TB for mirroring and 22TB -of useable space. - -#+begin_src sh -> zfs list - -NAME USED AVAIL REFER MOUNTPOINT -tank 145G 21.7T 104K /tank -tank/cloud 145G 21.7T 145G /tank/cloud -tank/media 145GT 21.7T 96K /tank/media -#+end_src - -** Creating Datasets - -According to [[https://docs.oracle.com/cd/E18752_01/html/819-5461/ftyue.html][ZFS Terminology]], a =dataset= can refer to “clones, file systems, -snapshots, and volumes. - -For this guide, I will use the =dataset= term to refer to file systems created -under a pool. - -Within my =tank= pool, I am going to create some datasets to help organize my -files. This will give me location to store data rather than simply dumping -everything at the =/tank/= location. - -#+begin_src sh -sudo zfs create tank/cloud -sudo zfs create tank/media -#+end_src - -Once created, you can see these datasets in the output of your pool -list: - -#+begin_src sh -> zfs list -NAME USED AVAIL REFER MOUNTPOINT -tank 752K 7.14T 104K /tank -tank/cloud 96K 7.14T 96K /tank/cloud -tank/media 96K 7.14T 96K /tank/media -#+end_src - -** Creating Snapshots - -Next, let's create our first snapshot. We can do this by calling the =snapshot= -command and give it an output name. I will be throwing the current date and time -into my example. - -#+begin_src sh -sudo zfs snapshot tank@$(date '+%Y-%m-%d_%H-%M') -#+end_src - -We can list the snapshots in our pool with the following command: - -#+begin_src sh -> zfs list -t snapshot -NAME USED AVAIL REFER MOUNTPOINT -tank@2024-02-06_19-41 0B - 104K - -#+end_src - -** Destroy Snapshots - -You can always destroy snapshots that are no longer needed: - -#+begin_src sh -sudo zfs destroy tank@2024-02-06_19-41 -#+end_src - -Once deleted, they will no longer appear in the list: - -#+begin_src sh -> zfs list -t snapshot -no datasets available -#+end_src - -* My Thoughts on ZFS So Far - -- I sacrificed 25TB to be able to mirror my data, but I feel more comfortable - with the potential to save my data by quickly replacing a disk if I need to. -- The set-up was surprisingly easy and fast. -- Disk I/O is fast as well. I was worried that the data transfer speeds would be - slower due to the RAID configuration. -- Media streaming and transcoding has seen no noticeable drop in performance. -- My only limitation really is the number of HDD bays in my server HDD cage. -#+date: <2024-02-13 Tue 00:00:00> -#+title: Resolving Ubuntu Boot Issues Caused by Invalid /etc/fstab Mounts -#+description: Detailed instructions to identify errors in the /etc/fstab file causing Ubuntu to enter emergency mode and steps to edit and restore normal boot operations. -#+slug: ubuntu-emergency-mode - -* The Problem - -I recently [[../zfs/][migrated my hard drives to a ZFS pool]] and found myself stuck in -Ubuntu's emergency mode after the first reboot I performed after creating the -ZFS pool. - -My server was stuck in the boot process and showed the following error on the -screen: - -#+begin_src txt -You are in emergency mode. -After logging in, type "journalctl -xb" to view system logs, -"systemctl reboot" to reboot, "systemctl default" -or ^D to try again to boot into default mode". -#+end_src - -After rebooting the server and watching the logs scroll on a monitor, I noticed -the root cause was related to a very long search for certain drives. I kept -seeing errors like this: - -#+begin_src txt -[ TIME ] Timed out waiting of device dev-disk-by/[disk-uuid] -#+end_src - -I realized that I had not removed the =/etc/fstab= references that asked Ubuntu -to mount two disks on boot, but I had recently changed those disks to be part of -my ZFS pool instead. Therefore, Ubuntu was trying to identify and mount a disk -that was not available. - -Now that we have an idea of the issue, let's move to solution. - -* The Solution - -In order to fix the issue, I waited until I was allowed to type the root user's -password, and then I executed the following command: - -#+begin_src sh -nano /etc/fstab -#+end_src - -Within the =fstab= file, I needed to comment/remove the following lines at the -bottom of the file. You can comment-out a line by prepending a =#= symbol at the -beginning of the line. You can also delete the line entirely. - -#+begin_src conf -# What it looked like when running into the issue: -UUID=B64E53824E5339F7 /mnt/white-01 ntfs-3g uid=1000,gid=1000 0 0 -UUID=E69867E59867B32B /mnt/white-02 ntfs-3g uid=1000,gid=1000 0 0 - -# What I changed it to, in order to fix the issue: -# UUID=B64E53824E5339F7 /mnt/white-01 ntfs-3g uid=1000,gid=1000 0 0 -# UUID=E69867E59867B32B /mnt/white-02 ntfs-3g uid=1000,gid=1000 0 0 -#+end_src - -Once removing the lines above from the =/etc/fstab= file, save and exit the file -by hitting the =Ctrl= + =x= key combo. - -You can now hit =Ctrl= + =D= to continue, or reboot: - -#+begin_src sh -systemctl reboot -#+end_src - -Once rebooted, I was able to watch the machine boot properly and launch to the -TTY login screen without errors! -#+date: <2024-02-21 Wed 00:00:00> -#+title: Self-Hosting Guide: An Otter Wiki -#+description: Stepwise directions for installing Otter Wiki, configuring Docker Compose environment, and setting up Nginx reverse proxy for secure access. -#+slug: self-hosting-otter-wiki - -* An Otter Wiki - -[[https://otterwiki.com/][An Otter Wiki]] is an easy to use wiki software that takes almost no effort to set -up and maintain. - -* Installation - -To install An Otter Wiki, I'm going to use Docker Compose to create the -container and then use Nginx as a reverse proxy to allow external access via a -subdomain I own. - -** Docker Compose - -Start by creating a directory for the container's files. - -#+begin_src sh -mkdir ~/otterwiki -#+end_src - -Next, create the =docker-compose.yml= file to define the container's parameters. - -#+begin_src sh -nano ~/otterwiki/docker-compose.yml -#+end_src - -Within the file, paste the following content. You can read the project's -documentation if you want to further override or customize the container. - -#+begin_src conf -version: '3' -services: - otterwiki: - image: redimp/otterwiki:2 - restart: unless-stopped - # Internal port must be assigned to port 80 - # External port can be customized - ports: - - 8337:80 - volumes: - - ./app-data:/app-data -#+end_src - -Once the file is saved and closed, you can launch the container. - -#+begin_src sh -cd ~/otterwiki -sudo docker-compose up -d -#+end_src - -The container is now available at =localhost:8337=. Next, we will use Nginx to -serve this app externally. - -** Nginx - -To access the app externally, let's set up a reverse proxy. I'll start by -creating the Nginx configuration file for my wiki. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/wiki -#+end_src - -Within the file, I have saved the following content. This assumes you already -have a TLS/SSL cert to use with this subdomain. If not, simply remove the -=ssl_*= variables, remove the =80= server block, and change the =443= server -block to =80= to serve the app without SSL. - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name wiki.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name wiki.example.com; - access_log /var/log/nginx/wiki.access.log; - error_log /var/log/nginx/wiki.error.log; - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; - - location / { - set $upstream_wiki http://127.0.0.1:8337; - proxy_pass $upstream_wiki; - - proxy_set_header Host $http_host; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Host $http_host; - } -} -#+end_src - -Save and close the configuration file. On Nginx, we need to symlink the file to -enable it. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/wiki /etc/nginx/sites-enabled/wiki -#+end_src - -Once enabled, restart the Nginx server to start serving the app externally. - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src -#+date: <2024-03-13 Wed 00:00:00> -#+title: Doom Emacs & Org-Mode Setup -#+description: Technical manual covering installation, configuration files, and usage procedures for Doom Emacs and Org-Mode targeting note management and task organization. -#+slug: doom-emacs - -** Screenshots - -These screenshots are showing a project opened with projectile, a treemacs side -pane open with the project contents, multiple buffers tiled next to each other, -and the help pane open at the bottomm. - -The themes are =doom-homage-white= and =doom-homage-black=. - -#+caption: Doom Emacs Light Mode -#+attr_html: :alt An example of the doom-homage-white theme on the Doom dashboard. -[[https://img.cleberg.net/blog/20240314-doom-emacs/light.webp]] - -#+caption: Doom Emacs Dark Mode -#+attr_html: :alt An example of the doom-homage-black theme on the Doom dashboard. -[[https://img.cleberg.net/blog/20240314-doom-emacs/dark.webp]] - -** Getting Started - -I have been switching back and forth between [[https://en.wikipedia.org/wiki/Markdown][markdown]] and [[https://en.wikipedia.org/wiki/Org-mode][org-mode]] recently for -my personal note taking, wiki, and even this blog. As a result, I have been -stumbling further into the world of Emacs and found myself at a point where I -now prefer to do most of my basic editing within Emacs. - -I'll leave the markdown vs. org-mode debate for another post, but I love -org-mode's extensibility and interactive nature within Emacs, but it becomes -very unwieldy in any other client implementation of org-mode - especially on -iOS. On the flip side, markdown is limited in functionality and fractured into -different standards, but it's simple and popular enough that there are a -plethora of great clients to choose from that will get the job done. - -For now, I want to focus on how I have been using Emacs and some of the things -that would have helped me learn it faster had I known where to start. - -*** Installation - -This post focuses on [[https://github.com/doomemacs/doomemacs][Doom Emacs]], which is an Emacs framework that provides an -alternative experience to the vanilla [[https://www.gnu.org/software/emacs/][GNU Emacs]]. - -The [[https://github.com/doomemacs/doomemacs/blob/master/docs/getting_started.org][Getting Start Guide]] has an extremely detailed walkthrough of installation -for all systems, so please refer to that guide for up-to-date instructions. - -I chose to install on macOS, using the Homebrew option with the -=railwaycat/emacsmacport= version of Emacs. - -Once the program is installed, you can run the program by typing =emacs= in a -terminal. If you installed a version of Emacs that supports both a GUI and TUI, -you will have to run =emacs -nw= to get the TUI instead of the default GUI. - -*** Configuration - -Once installed, you can configure Doom by editing the files within the -=~/.doom.d/= directory. This directory holds four files: - -1. =config.el= - Personal configuration file -2. =custom.el= - Custom set variables -3. =init.el= - Doom modules and load order, must run =doom sync= after modifying -4. =packages.el= - Declare packages to install in this file, then run =doom - sync= to install - -I only needed a few customizations for my configuration, so I'll list them -below. - -#+begin_src lisp -;; ~/.doom.d/config.el -(setq doom-theme 'doom-homage-black) -(setq display-line-numbers-type t) -(setq org-directory "~/Documents/Notes/") - -;; lengthy org-publish directives at the bottom of the file -#+end_src - -#+begin_src lisp -;; ~/.doom.d/init.el -(doom! :input - :completion - company ; the ultimate code completion backend - vertico ; the search engine of the future - - :ui - doom ; what makes DOOM look the way it does - doom-dashboard ; a nifty splash screen for Emacs - (emoji +unicode) ; 🙂 - hl-todo ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW - minimap ; show a map of the code on the side - modeline ; snazzy, Atom-inspired modeline, plus API - ophints ; highlight the region an operation acts on - (popup +defaults) ; tame sudden yet inevitable temporary windows - tabs ; a tab bar for Emacs - treemacs ; a project drawer, like neotree but cooler - (vc-gutter +pretty) ; vcs diff in the fringe - vi-tilde-fringe ; fringe tildes to mark beyond EOB - workspaces ; tab emulation, persistence & separate workspaces - - :editor - (evil +everywhere); come to the dark side, we have cookies - file-templates ; auto-snippets for empty files - fold ; (nigh) universal code folding - snippets ; my elves. They type so I don't have to - - :emacs - dired ; making dired pretty [functional] - electric ; smarter, keyword-based electric-indent - undo ; persistent, smarter undo for your inevitable mistakes - vc ; version-control and Emacs, sitting in a tree - - :term - term ; basic terminal emulator for Emacs - - :checkers - syntax ; tasing you for every semicolon you forget - - :tools - (eval +overlay) ; run code, run (also, repls) - lookup ; navigate your code and its documentation - magit ; a git porcelain for Emacs - - :os - (:if (featurep :system 'macos) macos) ; improve compatibility with macOS - - :lang - common-lisp ; if you've seen one lisp, you've seen them all - emacs-lisp ; drown in parentheses - markdown ; writing docs for people to ignore - org ; organize your plain life in plain text - python ; beautiful is better than ugly - sh ; she sells {ba,z,fi}sh shells on the C xor - - :app - irc ; how neckbeards socialize - (rss +org) ; emacs as an RSS reader - - (default +bindings +smartparens)) -#+end_src - -If you're editing these files within Doom directly, remember to run =SPC h r r= -to reload the configuration. Also remember to run =doom sync= for any changes to -the =init.el= or =packages.el= files. - -** Basic Functionality - -I kept a cheat sheet note open at first with all of the basic functions typed -out, copied as I went through the tutorial. After a little while, I no longer -needed it. I highly recommend writing down the most applicable shortcuts for -your preferred functionality and refer back to it until you've memorized it. - -Memorizing the shortcuts will differ based on the type of Emacs framework being -used. Personally, migrating from vanilla Emacs to Doom Emacs simplified -everything by a large factor and instantly enabled me to start working on my -projects, eliminating most of the hurdles I was running into. The vanilla emacs -hotkeys became obnoxious and I actually stopped using Emacs entirely for about a -month before trying Doom. - -For me, the first logical step is to interact with the local filesystem. To do -this, I needed to know how to open directories, open files, save files, discard -changes, close files, and switch between open files. Here are some example -shortcuts I've written down in order to accomplish file-based actions. - -| Doom Hotkey | Emacs Hotkey | Description | -|-----------------+---------------+----------------------------------------| -| =SPC := | =C-x= | Run functions | -| =SPC f f= | =C-x f= | Open file in buffer | -| =SPC f d= | =C-x d= | Open directory with =dired= | -| =i= | =C-x C-q= | Edit current buffer (insert mode) | -| =q= | =C-x C-q= | Quit out of insert mode | -| =SPC f s= | =C-x s= | Save current buffer | -| =SPC b k= | =C-x k= | Kill current buffer | -| =SPC w h/j/k/l= | =C-x o=[fn:2] | Move left/down/up/right to next buffer | - -In general, when in Doom, you can press =SPC= and wait a second for the help -pane to appear with all available hotkey options. For example, you can press -=SPC=, wait for the help pane, and then select a key such as =g= to enter the -git help pane and explore further command options. - -** Editing - -Next in my process is to dive into editing for any languages I'm currently -using. In this post, I will just cover Markdown and Org-Mode but I have also -been slowly adoping some Python and general web dev tools as well. - -*** Markdown - -#+caption: Markdown Preview -#+attr_html: :alt An editing buffer opened to a markdown file. -[[https://img.cleberg.net/blog/20240314-doom-emacs/markdown.webp]] - -Markdown is fairly simple as the syntax is limited, so just make sure the -=~/.doom.d/init.el= includes the =markdown= declaration in the =:lang= section. - -This package includes the following hotkey menus. The insert and toggle menu -expands further, allowing you to insert various markdown elements and toggle -things like link hiding. - -| Doom Hotkey | Function | -|------------------------------+--------------------------| -| =SPC m '= | markdown-edit-code-block | -| =SPC m e= | markdown-export | -| =SPC m i= | +insert | -| =SPC m o= | markdown-open | -| =SPC m p= | markdown-preview | -| =SPC m t= | +toggle | -| =SPC : markdown-table-align= | markdown-table-align | - -*** Org-Mode - -#+caption: Org-Mode Preview -#+attr_html: :alt An editing buffer opened to an org-mode file. -[[https://img.cleberg.net/blog/20240314-doom-emacs/org.webp]] - -Similar to the markdown section above, ensure that the =~/.doom.d/init.el= -includes the =org= declaration in the =:lang= section. - -There are a few hot keys, but a quick search with =SPC : org= shows that there -are 865 possible org-related functions you can run. I won't possibly be able to -list them all, so I will simply cover a few of the basic commands I use myself. - -| Doom Hotkey | Function | -|----------------+---------------------------------------| -| =SPC m t= | org-todo | -| =SPC n t= | org-todo-list | -| =SPC o A= | org-agenda | -| =SPC X= | org-capture | -| =SPC m p p= | org-priority | -| =SPC m d s= | org-schedule | -| =TAB= | org-cycle | -| =SHIFT TAB= | Collapse/open all headings in buffer | -| =M-q= | Format/wrap current section | -| =M-Left/Right= | Demote/promote current heading | -| =M-Down/Up= | Shift current heading section down/up | - -1. Org-Publish - - Org includes a [[https://orgmode.org/manual/Publishing.html][publishing management system]] by default that allows you to - export org files to Org, iCalendar, HTML, LaTex, Markdown, ODT, and Plain - Text. Most of these can be exported into another buffer and opened, or simply - to an external file. - - While inside an org file, simply run =SPC m e= or =M-x org-export-dispatch= - to open the export menu. This menu will show all options and ask you to - select an option. If you want to export to HTML, simply press =h= and then - =H= (As HTML buffer), =h= (As HTML file), or =o= (As HTML file and open). - -2. Projects - - Some publishing options are easier with a defined project in Emacs. To create - a project within Emacs, I use two methods: - - 1. Add the project via the projectile command =SPC p a=. Does not always work - for me. - 2. Add an empty =.projectile= file in the project root. - - Once a project has been created, you can create custom publishing actions - within your =~/.doom.d/config.el= file. For example, here's a test project I - created to try and convert this blog to org-mode recently. - - #+begin_src lisp - ;; org-publish - (require 'ox-publish) - - (defun my/org-sitemap-date-entry-format (entry style project) "Format ENTRY in - org-publish PROJECT Sitemap format ENTRY ENTRY STYLE format that includes - date." (let ((filename (org-publish-find-title entry project))) (if (= (length - filename) 0) (format "*%s*" entry) (format "{{{timestamp(%s)}}} - [[file:%s][%s]]" (format-time-string "%Y-%m-%d" (org-publish-find-date entry - project)) entry filename)))) - - (setq org-export-global-macros '(("timestamp" . "@@html:<time datetime='[$1]' - class='timestamp'>[$1]</time>@@"))) - - (setq org-publish-project-alist - `(("blog" - :base-directory "~/Source/cleberg.net/" - :base-extension "org" - :recursive t - :publishing-directory "~/Source/cleberg.net/public/" - :publishing-function org-html-publish-to-html - ;; HTML5 - :html-doctype "html5" - :html-html5-fancy t - ;; Disable some Org's HTML defaults - :html-head-include-scripts nil - :html-head-include-default-style nil - :section-numbers nil - :with-title nil - ;; Sitemap - :auto-sitemap t - :sitemap-title: "Sitemap" - :sitemap-sort-files anti-chronologically - ; :sitemap-function my/org-sitemap-date-entry-format - ;; Customize HTML output - :html-divs ((preamble "header" "preamble") - (content "main" "content") - (postamble "footer" "postamble")) - :html-head "<meta name='theme-color' content='#111' media='(prefers-color-scheme: dark)'> - <meta name='theme-color' content='#fff' media='(prefers-color-scheme: light)'> - <link rel='stylesheet' href='/syntax-theme-dark.css' media='(prefers-color-scheme: dark)'> - <link rel='stylesheet' href='/syntax-theme-light.css' media='(prefers-color-scheme: light)'> - <link rel='stylesheet' href='/styles.css' type='text/css'>" - :html-preamble "<nav class='site-nav' aria-label='site-nav' role='navigation'> - <ul> - <li><a href='/'>Home</a></li> - <li><a href='/blog/'>Blog</a></li> - <li><a href='/services/'>Services</a></li> - <li><a href='/wiki/'>Wiki</a></li> - </ul></nav> - <h1>%t</h1> - <time datetime='%d'>%d</time>" - :html-postamble " - <p>Last build: %T</p> - <p>Created with %c</p>" - ) - - ("static" - :base-directory "~/Source/cleberg.net/static/" - :base-extension "css\\|txt\\|jpg\\|gif\\|png" - :recursive t - :publishing-directory "~/Source/cleberg.net/public/" - :publishing-function org-publish-attachment) - - ("cleberg.net" :components ("blog" "static")))) - #+end_src - -** General Thoughts - -I have enjoyed Doom Emacs (far more than GNU Emacs) and will likely continue to -use it as my main editor for the time being. Org-Mode is certainly the largest -factor here, as I far prefer it over Markdown due to its inherent features and -detailed markup options. However, working with org-mode on iOS has been a pain -and I will have to see if there's an easier way to resolve those issues or if -going back to separate Markdown, Reminders, and Calendar apps is easier to work -with than an all-in-one org solution. - -[fn:1] Doom's evil-window functionality is a bit different from GNU Emacs, but - you can always switch to the "other" buffer with =C-x o= or =C-x b= to - get a list of buffers to select. - -[fn:2] Doom's evil-window functionality is a bit different from GNU Emacs, but - you can always switch to the "other" buffer with =C-x o= or =C-x b= to - get a list of buffers to select. -#+date: <2024-03-15 Fri 00:00:00> -#+title: Self-Hosting Guide: DDNS Updater -#+description: Step-by-step configuration guide for deploying a Dynamic DNS updater using Docker Compose, integrating with Cloudflare API, and securing with Nginx reverse proxy. -#+slug: self-hosting-ddns-updater - -#+caption: DDNS Updater Web View -#+attr_html: :alt An example of the DDNS Updater app running and showing that cleberg.net's IP has been updated on Cloudflare. -[[https://img.cleberg.net/blog/20240315-ddns-updater/ddns.webp]] - -[[https://github.com/qdm12/ddns-updater][DDNS Updater]] is a program to keep DNS A and/or AAAA records updated for multiple -DNS providers. - -If you've read any of my other posts, you'll notice that I have been searching -for and using a few different DDNS updating solutions for years. You'll also -notice that I love any projects that offer a Docker Compose solution. - -Luckily, DDNS Upater fits both of these preferences. - -** Installation - -To get started, always make sure to review the project's [[https://github.com/qdm12/ddns-updater/blob/master/README.md][README]]. I'll be -documenting my steps below, but they may have changed by the time you read this. - -The first step is to set up the directories and files required for the project. - -#+begin_src sh -mkdir ~/ddns-updater -mkdir ~/ddns-updater/data -touch ~/ddns-updater/data/config.json -#+end_src - -*** Configuration - -The main configuration you need to update is the =data/config.json= file. There -is a large list of supported providers in the README, but I'm going to use -Cloudflare in this example. - -#+begin_src sh -nano ~/ddns-updater/data/config.json -#+end_src - -When setting up the configuration for Cloudflare, you'll need the following: - -- Required Parameters - - ="zone_identifier"= is the Zone ID of your site from the domain overview - page - - ="host"= is your host and can be ="@"=, a subdomain or the wildcard ="*"=. - See [[https://github.com/qdm12/ddns-updater/issues/243#issuecomment-928313949][this issue comment for context]]. - - ="ttl"= integer value for record TTL in seconds (specify 1 for automatic) - - One of the following ([[https://developers.cloudflare.com/fundamentals/api/get-started/][how to find API keys]]): - - Email ="email"= and Global API Key ="key"= - - User service key ="user_service_key"= - - API Token ="token"=, configured with DNS edit permissions for your DNS - name's zone -- Optional Parameters - - ="proxied"= can be set to =true= to use the proxy services of Cloudflare - - ="ip_version"= can be =ipv4= (A records), or =ipv6= (AAAA records) or =ipv4 - or ipv6= (update one of the two, depending on the public ip found). It - defaults to =ipv4 or ipv6=. - - ="ipv6_suffix"= is the IPv6 interface identifier suffix to use. It can be - for example =0:0:0:0:72ad:8fbb:a54e:bedd/64=. If left empty, it defaults to - no suffix and the raw public IPv6 address obtained is used in the record - updating. - -#+begin_src conf -{ - "settings": [ - { - "provider": "cloudflare", - "zone_identifier": "some id", - "domain": "domain.com", - "host": "@", - "ttl": 1, - "proxied": true, - "token": "yourtoken", - "ip_version": "ipv4", - "ipv6_suffix": "" - } - ] -} -#+end_src - -Once you have configured the provider of your choice, correct the file and -directory permissions and ownership. - -#+begin_src sh -cd ~/ddns_updater -# Owned by user ID of Docker container (1000) -chown -R 1000 data -# all access (for creating json database file data/updates.json) -chmod 700 data -# read access only -chmod 400 data/config.json -#+end_src - -*** Docker Compose - -After creating the project structure, let's create the =docker-compose.yml= -file. - -#+begin_src sh -nano ~/ddns_-pdater/docker-compose.yml -#+end_src - -#+begin_src config -version: "3.7" -services: - ddns-updater: - image: qmcgaw/ddns-updater - container_name: ddns-updater - network_mode: bridge - ports: - - 8097:8000/tcp # Change the 8097 value to whichever port you want to use - volumes: - - ./data:/updater/data - environment: - - CONFIG= - - PERIOD=5m - - UPDATE_COOLDOWN_PERIOD=5m - - PUBLICIP_FETCHERS=all - - PUBLICIP_HTTP_PROVIDERS=all - - PUBLICIPV4_HTTP_PROVIDERS=all - - PUBLICIPV6_HTTP_PROVIDERS=all - - PUBLICIP_DNS_PROVIDERS=all - - PUBLICIP_DNS_TIMEOUT=3s - - HTTP_TIMEOUT=10s - - # Web UI - - LISTENING_ADDRESS=:8000 - - ROOT_URL=/ - - # Backup - - BACKUP_PERIOD=0 # 0 to disable - - BACKUP_DIRECTORY=/updater/data - - # Other - - LOG_LEVEL=info - - LOG_CALLER=hidden - - SHOUTRRR_ADDRESSES= - restart: always -#+end_src - -After configuring your preferences in the =docker-compose.yml=, launch the -container. - -#+begin_src sh -cd ~/ddns-updater -sudo docker-compose up -d -#+end_src - -If you've launched this on your local machine, you can launch =localhost:8097= -in your browser to see the results. - -*** Nginx Reverse Proxy - -If you launched this service on a server, other machine, or just want to access -it remotely via a domain name, you can use Nginx as a reverse proxy to expose -the service publicly. - -Start by creating the Nginx configuration file. - -#+begin_src sh -sudo nano /etc/nginx/sites-available/ddns -#+end_src - -Here's a basic example that should work properly. - -#+begin_src conf -server { - # If using 443, remember to include your ssl_certificate - # and ssl_certificate_key - listen [::]:80; - listen 80; - server_name ddns.example.com; - - location / { - set $upstream_ao http://127.0.0.1:9380; - proxy_pass $upstream_ao; - - # May need some additional proxy_* parameters, - # see the full example below if necessary - } -} -#+end_src - -Here's a full example that uses my Authelia authentication service to require -authentication before someone can access the web page. - -#+begin_src conf -server { - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } - - listen [::]:80; - listen 80; - server_name ddns.example.com; - return 404; -} - -server { - listen [::]:443 ssl http2; - listen 443 ssl http2; - server_name ddns.example.com; - access_log /var/log/nginx/ddns.access.log; - error_log /var/log/nginx/ddns.error.log; - - add_header X-Content-Type-Options "nosniff"; - add_header X-XSS-Protection "1; mode=block"; - add_header X-Frame-Options "DENY"; - add_header Strict-Transport-Security "max-age=63072000; includeSubDomains"; - add_header Referrer-Policy "no-referrer"; - - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - include /etc/letsencrypt/options-ssl-nginx.conf; - ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; - - location /authelia { - internal; - set $upstream_authelia http://127.0.0.1:9091/api/verify; #change the IP and Port to match the IP and Port of your Authelia container - proxy_pass_request_body off; - proxy_pass $upstream_authelia; - proxy_set_header Content-Length ""; - - # Timeout if the real server is dead - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - client_body_buffer_size 128k; - proxy_set_header Host $host; - proxy_set_header X-Original-URL $scheme://$http_host$request_uri; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $remote_addr; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 4 32k; - - send_timeout 5m; - proxy_read_timeout 240; - proxy_send_timeout 240; - proxy_connect_timeout 240; - } - - location / { - set $upstream_ddns http://127.0.0.1:8097; #change ddns to match your container name: $upstream_some-container-name or $upstream_somecontainername - proxy_pass $upstream_ddns; #change ddns to match your container name: $upstream_some-container-name or $upstream_somecontainername - - auth_request /authelia; - auth_request_set $target_url https://$http_host$request_uri; - auth_request_set $user $upstream_http_remote_user; - auth_request_set $email $upstream_http_remote_email; - auth_request_set $groups $upstream_http_remote_groups; - proxy_set_header Remote-User $user; - proxy_set_header Remote-Email $email; - proxy_set_header Remote-Groups $groups; - - error_page 401 =302 https://auth.example.com/?rd=$target_url; #change this to match your authentication domain/subdomain - - client_body_buffer_size 128k; - - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - - send_timeout 5m; - proxy_read_timeout 360; - proxy_send_timeout 360; - proxy_connect_timeout 360; - - proxy_set_header Host $host; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection upgrade; - proxy_set_header Accept-Encoding gzip; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - - # set_real_ip_from 192.168.1.0/16; #make sure this matches your network setup - # real_ip_header CF-Connecting-IP; - # real_ip_recursive on; - } -} -#+end_src - -When complete, simply link the file and restart the web server. - -#+begin_src sh -sudo ln -s /etc/nginx/sites-available/ddns /etc/nginx/sites-enabled/ddns -sudo systemctl restart nginx.service -#+end_src - -Your ddns-updater service will now be available via =ddns.example.com=! -#+date: <2024-03-29 Fri 00:00:00> -#+title: Blogging with Emacs Org-Mode and Weblorg -#+description: Instructional content for preparing and publishing blogs using Emacs Org-Mode, including setup of static site generators and content management workflows. -#+slug: org-blog - -First and foremost, apologies to those who subscribe via RSS as I know that my -feed duplicated itself when I moved this blog over to org-mode last night. - -This post focuses specifically on the configuration and tools I use to blog from -Emacs with Org-Mode and does not focus on Emacs or Org-Mode themselves. Refer to -the post I wrote about [[https://cleberg.net/blog/doom-emacs-org-mode.html][Doom Emacs & Org-Mode]] for more information about my base -Emacs configuration. - -* Weblorg - -The first step in blogging with Org-Mode is to choose a method to convert the -source files to HTML and publish them. The Worg site maintains a nice list of -[[https://orgmode.org/worg/org-blog-wiki.html][Blogs and Wikis with Org]], but the tools are inevitably different and -opinionated, so you'll need to find what works for you. - -I tried using Jekyll, Hugo, ox-hugo, Nikola, Blorg, org-static-blog, and the -native org-publish functions before finally settling on Weblorg. For one reason -or another, the other solutions were a drastic step down from my previous -workflow that used [[https://www.getzola.org/][Zola]] with Markdown content. - -[[https://github.com/emacs-love/weblorg][Weblorg]] is a static site generator for [[https://orgmode.org/][org-mode]], built for use within [[https://www.gnu.org/software/emacs/][Emacs]]. -Since it's written in Emacs Lisp, there's no need to install other languages or -frameworks to get started. More than that, you can write in any editor you -please and simply invoke the Emacs build process with the =--script= parameter -instead of requiring you to blog inside Emacs. - -** Installation - -The [[https://emacs.love/weblorg/doc/index.html][Getting Started]] page details broad installation requirements. I am using -Doom Emacs on macOS, which requires you to add the package to the -=~/.doom.d/packages.el= file and configure the =publish.el= file slightly -differently. - -To start, add the =htmlize= and =weblorg= packages to Doom, sync the changes, -and reload. - -#+begin_src sh -nano ~/.doom.d/packages.el -#+end_src - -#+begin_src lisp -(package! htmlize) -(package! weblorg) -#+end_src - -#+begin_src sh -doom sync -#+end_src - -Either re-open Emacs or hit =SPC h r r= to reload the changes. - -** Configuration - -Now that I've installed weblorg, I need to configure the project. I'll start by -navigating to my site's source code and creating a =publish.el= file. - -#+begin_src sh -cd ~/Source/cleberg.net && nano publish.el -#+end_src - -Since I'm using Doom, Emacs will not automatically load the packages I need -later in the build process. To compensate, my =publish.el= file needs to -explicitly tell Emacs where Doom stores the =htmlize=, =weblorg=, and -=templatel= packages. - -#+begin_src lisp -;; explicity load packages since I'm using Doom Emacs -(add-to-list 'load-path "~/.emacs.d/.local/straight/repos/emacs-htmlize") -(add-to-list 'load-path "~/.emacs.d/.local/straight/repos/weblorg") -(add-to-list 'load-path "~/.emacs.d/.local/straight/repos/templatel") -(require 'htmlize) -(require 'weblorg) - -;; defaults to http://localhost:8000 -;; To build with the custom URL below, call: -;;;; ENV=prod emacs --script publish.el -(if (string= (getenv "ENV") "prod") - (setq weblorg-default-url "https://cleberg.net")) - -;; site metadata -(weblorg-site - :theme nil - :template-vars '(("site_name" . "cleberg.net") - ("site_owner" . "[email protected]") - ("site_description" . "Just a blip of ones and zeroes."))) - -;; route for rendering the index page of the website -(weblorg-route - :name "index" - :input-pattern "content/index.org" - :template "index.html" - :output ".build/index.html" - :url "/") - -;; route for rendering each blog post -(weblorg-route - :name "blog" - :input-pattern "content/blog/*.org" - :template "post.html" - :output ".build/blog/{{ slug }}.html" - :url "/blog/{{ slug }}.html") - -;; route for rendering the index page of the blog -(weblorg-route - :name "blog-index" - :input-pattern "content/blog/*.org" - :input-aggregate #'weblorg-input-aggregate-all-desc - :template "blog.html" - :output ".build/blog/index.html" - :url "/blog/") - -;; route for rendering each wiki post -(weblorg-route - :name "wiki" - :input-pattern "content/wiki/*.org" - :template "post.html" - :output ".build/wiki/{{ slug }}.html" - :url "/wiki/{{ slug }}.html") - -;; route for rendering the index page of the wiki -(weblorg-route - :name "wiki-index" - :input-pattern "content/wiki/*.org" - :input-aggregate #'weblorg-input-aggregate-all - :template "wiki.html" - :output ".build/wiki/index.html" - :url "/wiki/") - -;; routes for rendering all other pages -(weblorg-route - :name "pages" - :input-pattern "content/*.org" - :template "page.html" - :output ".build/{{ slug }}.html" - :url "/{{ slug }}.html") - -(weblorg-route - :name "salary" - :input-pattern "content/salary/*.org" - :template "page.html" - :output ".build/salary/{{ slug }}.html" - :url "/salary/{{ slug }}.html") - -(weblorg-route - :name "services" - :input-pattern "content/services/*.org" - :template "page.html" - :output ".build/services/{{ slug }}.html" - :url "/services/{{ slug }}.html") - -;; RSS Feed -(weblorg-route - :name "rss" - :input-pattern "content/blog/*.org" - :input-aggregate #'weblorg-input-aggregate-all-desc - :template "feed.xml" - :output ".build/feed.xml" - :url "/feed.xml") - -;; route for static assets that also copies files to .build directory -(weblorg-copy-static - :output ".build/{{ file }}" - :url "/{{ file }}") - -;; fire the engine and export all the files declared in the routes above -(weblorg-export) -#+end_src - -* Project - -** Structure - -The project structure for weblorg is highly customizable and the main -restriction is that the =publish.el= file must point to the correct paths. - -For my blog, I prefer to keep the blog content out of the top-level directory. -This results in the following structure (shortened for brevity): - -#+begin_src txt -.build/ -content/ - blog/ - example-blog-post.org - index.org - wiki/ - example-wiki-post.org - index.org - index.org - other-example-page.org -theme/ - static/ - styles.css - robots.txt - templates/ - base.html - blog.html - index.html - page.html - post.html - wiki.html -build.sh -publish.el -#+end_src - -This is simply my preferred structure and you can alter it to fit your needs. -The key here really is that you can customize at will, as long as the -=publish.el= file matches. - -** Build & Deploy - -Once you're content with the status of the project, you're ready to build and -deploy the blog. - -My process utilizes a =build.sh= script that combines the steps I take every -time. - -#+begin_src sh -touch build.sh && chmod +x build.sh && nano build.sh -#+end_src - -Within this script, I do the following: - -1. Remove any files within the =.build= directory that I use to store published - files. -2. Set the environment variable to =prod= to ensure the =base_url= matches my - configuration in =publish.el=. -3. Build the site with Emacs & =publish.el=. -4. Use =scp= to copy files to my site's public directory on my server. - -#+begin_src sh -rm -rf .build/* && \ -ENV=prod emacs--script publish.el && \ -scp -r .build/* ubuntu:/var/www/cleberg.net/ -#+end_src - -*** Time to Build - -My only current complaints are: - -1. Errors messages are not helpful. It takes work to determine what the error is - and where it's coming from. I generally have to sit and watch the build - process to see the file that weblorg pubslishes right before the error - occurred. -2. The build process re-builds every single file on each run, which takes a long - time for a blog of my size. See below for the last time I measured. - -#+begin_src sh -> time ./build.sh - -./build.sh 35.46s user 0.59s system 85% cpu 41.965 total -#+end_src - -Overall, I have thoroughly enjoyed using weblog and will continue to use it -going forward until I find something better. -#+date: <2024-04-06 Sat 00:00:00> -#+title: Converting OneNote Exports to Markdown and Org-Mode -#+description: Detailed conversion instructions to transform OneNote document files into Markdown or Org-Mode formats using Pandoc command-line utility on Windows systems. -#+slug: convert-onenote-to-markdown - -If you're looking to convert your OneNote content to another format, such as -Markdown or Org-Mode, you're in luck. I use a solution that doesn't require -other programs, such as Evernote or Notion. Personally, I used this solution on -a managed corporate laptop that doesn't allow installation of other programs -like these. - -This solution uses OneNote and Pandoc on Windows 10. - -* Export OneNote Content to Word - -To start, export any pages or tabs from OneNote to the Word format (=.docx=): - -1. Open OneNote desktop. -2. Select =File= and then =Export=. -3. Select the scope of content to export, such as =Tab= or =Page=. -4. Name and save the file in an easy to remember location. I recommend your - Downloads or Desktop folder. - -See below for a visual walkthrough of the export process. - -* Download Pandoc - -Start by downloading Pandoc from their [[https://github.com/jgm/pandoc/releases][GitHub releases]] page. I cannot install -=.msi= files on my corporate laptop, so I downloaded the -=pandoc-3.1.12.3-windows-x86_64.zip= file, which contains a simple =.exe= file -that you do not need to install - you will simply run it from the command line -below. - -Once downloaded, unzip the archive and move the =pandoc.exe= file to the same -folder where your Word documents were saved above. If you prefer, you can move -this file to an easier location, such as =C:\Users\youruser\Downloads=. - -* Convert Word to Markdown - -In this example, I will be converting the Word documents to Markdown, but Pandoc -supports [[https://github.com/jgm/pandoc?tab=readme-ov-file#the-universal-markup-converter][a ton of different formats for conversion]]. Choose the format you prefer -and then modify the following commands as needed. - -To perform the conversion, open the Command Prompt. If you can't find it, open -the start menu and search for it. - -Within the command prompt, navigate to the directory where you stored the -=pandoc.exe= file and the Word documents. - -#+begin_src ps1 -cd "C:\Users\yourusername\Downloads" -#+end_src - -You can verify that you're in the correct directory with the =dir= -command. - -#+begin_src ps1 -dir -#+end_src - -Once you have verified that you have the command prompt open in the correct -directory with the =pandoc.exe= and the Word documents, you can run the -following loop to convert all Word documents to Markdown. - -#+begin_src ps1 -for %f in (*.docx) do (pandoc.exe --extract-media=. --wrap=preserve "%f" -o "%f.md") -#+end_src - -This loop will perform the following actions: - -1. Find all documents matching the pattern =*.docx=, which means all Word - documents ending with that file extension. -2. Iterate through all files found in step 1. -3. For each file, perform the pandoc command. -4. Within the pandoc command, =--extract-media= saves all media found in the - files to the current folder, with pandoc automatically creating a =media= - subfolder to hold all images. -5. Within the pandoc command, =--wrap=preserve= will attempt to prseerve the - wrapping from the source document. -6. Within the pandoc command, the final step is to specify the output path with - =-o=. This option adds the =.md= file extension to recognize the output files - as Markdown files. - -If you want to export to another format, simply specify the =-f==/=--from== and -=-t==/=--to== options. - -For example, you can convert the Word document to org-mode. You can also convert -to one format and subsequently convert to other formats as needed. - -#+begin_src ps1 -pandoc.exe -f docx -t org file.docx -#+end_src -#+date: <2024-04-08 Mon 00:00:00> -#+title: Local Web Dev Server Setup with Docker & Nginx -#+description: Instructions for setting up a local web development environment employing Docker Desktop and Nginx web server to facilitate development and testing workflows. -#+slug: docker-local-web-server - -When developing websites locally, I often use a simple Python web server to -observe the changes. - -#+begin_src sh -python3 -m http.server -#+end_src - -However, this approach has its limitations. For example, this approach does not -enable logging or access controls. You also need to customize =SimpleHTTPServer= -if you have advanced needs from your web server. - -So, I went to find an alternative that is almost as easy and far more extensible -and found Docker Desktop to be a suitable replacement. - -* Docker Desktop - -** Installation - -[[https://www.docker.com/products/docker-desktop/][Docker Desktop]] is a desktop GUI for the phenomenal Docker container software. -This allows you to manage containers, images, volumes, environments, and -extensions via an easy-to-use GUI. - -To install, open the link above and click the =Download= button for your -platform. I'm going through this process on an M2 Macbook, so I downloaded the -Mac - Apple Chip version. - -Open the installer and follow the installation process until the application -finishes the installation process. - -#+caption: Docker Desktop on macOS -#+attr_html: :alt The Containers home page of the Docker Desktop app on macOS. -[[https://img.cleberg.net/blog/20240408-docker-local-web-server/docker-desktop.webp]] - -** Creating an Nginx Container - -I prefer to use the command line to create containers, so the following commands -will be input via the terminal. - -The following command will create a container, using the =nginx= image: - -1. =-d=: Run this container as a daemon (detach) -2. =-p=: Allocate a port in the format =<external>:<internal>= -3. =-i=: Keep STDIN open even if not attached -4. =-t=: Allocate a pseudo-TTY -5. =-p=: Allocate a port in the format =<external>:<internal>= -6. =--rm=: Remove the container once it's done running - -#+begin_src sh -docker run -it --rm -d -p 8000:80 --name web nginx -#+end_src - -You can navigate to [[http://localhost:8000]] to see the resulting page. - -#+caption: Default Nginx Container -#+attr_html: :alt The generic "Welcome to nginx!" page viewable at localhost:8000. -[[https://img.cleberg.net/blog/20240408-docker-local-web-server/default-container.webp]] - -** Customizing the Nginx Container - -Now that I have a container running the Nginx web server, I need to link some -volumes so that I can modify the site configuration and provide the web files to -serve. - -Let's start with the new command, which adds two volumes: - -1. =<your_content>:/usr/share/nginx/html=: This is the directory where you will - provide the web pages for the server to serve. -2. =<your_config>:/etc/nginx/conf.d/default.conf=: This is the Nginx - configuration file for your site. - -To see the updates, you can delete the previous container in the GUI or run -=docker stop web= to stop the container. Once stopped, you can run the new -=docker run= command below. - -#+begin_src sh -docker run -it -d -p 8000:80 --name web -v ~/Source/cleberg.net/.build:/usr/share/nginx/html -v ~/Source/cleberg.net/nginx-config.conf:/etc/nginx/conf.d/default.conf nginx -#+end_src - -Here's an example of my development configuration file. - -#+begin_src conf -# nginx-config.conf -server { - server_name cleberg.net www.cleberg.net; - - root /usr/share/nginx/html; - index index.html; - autoindex on; - - access_log /var/log/nginx/cleberg.net.access.log; - error_log /var/log/nginx/cleberg.net.error.log; - - location / { - try_files $uri $uri/ =404; - } - - listen [::]:80; - listen 80; -} -#+end_src - -#+caption: Deploying My Website via Docker -#+attr_html: :alt A view of cleberg.net on the localhost, as the docker container is pointing to the cleberg.net repository directory. -[[https://img.cleberg.net/blog/20240408-docker-local-web-server/custom-container.webp]] - -* Customizing Deployment Actions - -I am currently blogging with [[https://emacs.love/weblorg/][weblorg]], which uses a custom =publish.el= file to -build the static site. Within this file, I have configured my deployment process -to check for the =ENV= variable in thesh and if it's set to =prod=, the script -will set the base URLs to =https://cleberg.net=. If not, it sets the base URLs -to =localhost:8000= (which matches the port used in the container above). - -Therefore, I have modified my =build.sh= script to build with =localhost= URLs -if =ENV= is not set to =prod=. It also prevents the build process from sending -the built files to the production web server. - -#+begin_src sh -#!/bin/bash - -if [ "$ENV" == "prod" ]; then - echo "Environment = Production" && \ - rm -rf .build/* && \ - emacs --script publish.el && \ - scp -r .build/* ubuntu:/var/www/cleberg.net/ -else - echo "Environment = Development" && \ - rm -rf .build/* && \ - emacs --script publish.el -fi -#+end_src - -You can modify the container in numerous ways and this approach allows you to -create complex scenarios for your web development purposes. I highly recommend -switching over to a container-based approach for simple, local web development. -#+date: <2024-04-18 Thu 00:00:00> -#+title: Configuring Mu4e with Doom Emacs on macOS -#+description: Stepwise procedure for installing, configuring, and using Mu4e email client within Doom Emacs on macOS for organized email management. -#+slug: mu4e - -This post was heavily inspired by [[https://macowners.club/posts/email-emacs-mu4e-macos/][Email setup in Emacs with Mu4e on macOS]], but -with my own tweaks for a single-account configuration and some Doom-specific -configurations. - -* Overview - -[[https://github.com/emacsmirror/mu4e][Mu4e]] is an Emacs-based email client based on [[https://www.djcbsoftware.nl/code/mu/][mu]], an indexer that stores email in -the Maildir format. - -This blog post covers the installation of Mu4e in Doom Emacs on macOS. This -guide should be very similar to GNU Emacs and Linux-based systems, with a few -tweaks required in the various configuration files. - -* Installation - -** Prerequisites - -*** Create the Folder Structure - -Start by creating the base folder structure: - -#+begin_src sh -mkdir ~/.maildir -mkdir ~/.maildir/example # use whatever name you want to call your email account -mkdir ~/.maildir/certificates # used to store system root certificates -#+end_src - -*** Store Email Account Passwords in macOS Keychain - -Next, I will be using the macOS Keychain to store my email account passwords -using the command below. - -#+begin_src sh -security add-generic-password -s mu4e-example -a [email protected] -w -#+end_src - -This will prompt you to input your password twice to confirm. Keep the -=mu4e-example= name in mind, as you will need to reference it later in the IMAP -and SMTP configuration files. - -*** Store Root Certificates - -In order to use IMAP and SMTP, we need to provide certificates to the local -services. We will use the macOS defaults for this. - -1. Open =Keychain Access.app=. -2. Select =System Roots= in the sidebar. -3. Select all items with =CMD + a=. -4. Export selected items with =SHIFT + CMD + a= to the file - =~/.maildir/certificates/root-certificates.pem=. - -*** Install Dependencies - -Install =mbsync= (via =isync=) to fetch emails via IMAP, =mu= to index emails, -and =msmtp= to send emails via SMTP. - -#+begin_src sh -brew install mu isync msmtp -#+end_src - -** Installing Mu4e - -Within Doom Emacs, we can install Mu4e by enabling the package. - -#+begin_src sh -nano ~/.doom.d/init.el -#+end_src - -In this file, uncomment the =mu4e= line within the =:email= section. You can -also enable the =+org= and =+gmail= options if you prefer. - -#+begin_src lisp -(doom! :input - ... - :email - mu4e - ;;(mu4e +org +gmail) - ... - (default +bindings +smartparens)) -#+end_src - -* Configuration - -As an overall suggestion, I create the following configuration files in the -=~/.maildir= directory and using symlinks to their proper locations so that I -can backup and restore these files easily. - -#+begin_src sh -touch ~/.maildir/.mbsyncrc && \ -touch ~/.maildir/.msmtprc && \ -ln -s /Users/username/.maildir/.mbsyncrc /Users/username/.mbsyncrc && \ -ln -s /Users/username/.maildir/.msmtprc /Users/username/.msmtprc -#+end_src - -You can also create these files in your home directory and skip the symlinking -process above. - -** IMAP - -Next, let's configure =mbsync= in the file created above. Paste the following -information and customize it to match your mail provider's information. - -#+begin_src sh -nano ~/.maildir/.mbsyncrc -#+end_src - -#+begin_src conf -IMAPAccount example -Host imap.example.com -User [email protected] -PassCmd "security find-generic-password -s mu4e-example -a [email protected] -w" -Port 993 -SSLType IMAPS -AuthMechs Login -CertificateFile ~/.maildir/certificates/root-certificates.pem - -IMAPStore example-remote -Account example - -MaildirStore example-local -SubFolders Verbatim -Path ~/.maildir/example/ -Inbox ~/.maildir/example/INBOX - -Channel example -Far :example-remote: -Near :example-local: -Patterns * -Create Near -Sync All -Expunge Both -SyncState * -#+end_src - -** SMTP - -Next, let's configured =msmtprc= in the file created above. Paste the following -information and customize it to match your mail provider's information. - -#+begin_src sh -nano ~/.maildir/.msmtprc -#+end_src - -#+begin_src conf -# Set default values for all the accounts. -defaults -logfile ~/.maildir/msmtp.log -tls_trust_file ~/.maildir/certificates/root-certificates.pem - -# ====================================================================== - -account startmail -auth on -host smtp.startmail.com -port 465 -protocol smtp -from [email protected] -user [email protected] -passwordeval security find-generic-password -s startmail -a [email protected] -w -tls on -tls_starttls off - -# ====================================================================== - -account default : startmail -#+end_src - -** Doom Emacs - -Finally, we need to configure Doom Emacs to use the proper packages and set some -variables and functions. - -#+begin_src sh -nano ~/.doom.d/config.el -#+end_src - -#+begin_src lisp -;; load packages and programs -(use-package mu4e - :load-path "/Users/username/.emacs.d/modules/email/mu4e/") -(require 'smtpmail) -(setq mu4e-mu-binary (executable-find "mu")) - -;; set base directory -(setq mu4e-maildir "~/.maildir") - -;; sync imap servers -(setq mu4e-get-mail-command (concat (executable-find "mbsync") " -a")) - -;; how often to sync in seconds -(setq mu4e-update-interval 300) - -;; save attachments to defined directory -(setq mu4e-attachment-dir "~/Downloads") - -;; rename files when moving - needed for mbsync: -(setq mu4e-change-filenames-when-moving t) - -;; list of your email adresses: -(setq mu4e-user-mail-address-list '("[email protected]")) - -;; check your ~/.maildir to see naming of subdirectories -(setq mu4e-maildir-shortcuts - '(("/example/INBOX" . ?e) - ("/example/Sent" . ?E))) - -(setq mu4e-contexts - `(,(make-mu4e-context - :name "example" - :enter-func - (lambda () (mu4e-message "Enter [email protected] context")) - :leave-func - (lambda () (mu4e-message "Leave [email protected] context")) - :match-func - (lambda (msg) - (when msg - (mu4e-message-contact-field-matches msg - :to "[email protected]"))) - :vars '((user-mail-address . "[email protected]") - (user-full-name . "Christian Cleberg") - ;; check your ~/.maildir to see how the subdirectories are called - ;; e.g `ls ~/.maildir/example' - (mu4e-drafts-folder . "/example/Drafts") - (mu4e-refile-folder . "/example/Archive") - (mu4e-sent-folder . "/example/Sent") - (mu4e-trash-folder . "/example/Trash"))))) - -(setq mu4e-context-policy 'pick-first) ;; start with the first (default) context; -(setq mu4e-compose-context-policy 'ask) ;; ask for context if no context matches; - -;; gpg encryptiom & decryption: -;; this can be left alone -(require 'epa-file) -(epa-file-enable) -(setq epa-pinentry-mode 'loopback) -(auth-source-forget-all-cached) - -;; don't keep message compose buffers around after sending: -(setq message-kill-buffer-on-exit t) - -;; send function: -(setq send-mail-function 'sendmail-send-it - message-send-mail-function 'sendmail-send-it) - -;; send program: -(setq sendmail-program (executable-find "msmtp")) - -;; select the right sender email from the context. -(setq message-sendmail-envelope-from 'header) - -;; mu4e cc & bcc -(add-hook 'mu4e-compose-mode-hook - (defun timu/add-cc-and-bcc () - "My Function to automatically add Cc & Bcc: headers. - This is in the mu4e compose mode." - (save-excursion (message-add-header "Cc:\n")) - (save-excursion (message-add-header "Bcc:\n")))) - -;; mu4e address completion -(add-hook 'mu4e-compose-mode-hook 'company-mode) -#+end_src - -Be sure to sync Doom to update the current configurations. - -#+begin_src sh -doom sync -#+end_src - -If you have Doom open, execute =SPC h r r= to reload the new configurations. - -* Initial Sync - -Once you have configured all of the relevant files, you can perform an initial -sync. Note that you can perform syncing within Mu4e itself after this. - -#+begin_src sh -mbsync -aV -#+end_src - -Once you sync the data, you can index the emails. - -#+begin_src sh -mu init -m ~/.maildir --my-address [email protected] && \ -mu index -#+end_src - -The emails will now to be ready to use! - -* Screenshots - -You can now launch Doom and open Mu4e with =SPC o m=. You can also explore the -Mu4e options with =SPC : mu4e=. - -The home page shows various options and metadata about the account you've -opened. - -#+caption: Mu4e Home Page -#+attr_html: :alt The mu4e homepage within iTerm2, showing the basics, bookmarks, maildirs, and misc sections. -[[https://img.cleberg.net/blog/20240418-mu4e/mu4e.webp]] -#+date: <2024-05-03 Fri 00:00:00> -#+title: OrbStack on macOS: Running a Full Ubuntu Linux Environment -#+description: Technical guide outlining the installation and operation of OrbStack to run Ubuntu Linux containers natively on macOS systems with performance considerations. -#+slug: ubuntu-on-macos - -Being a macOS user who previously used Linux for many years, I often find myself -searching for alternatives to the Linux-native tools and methods that I had -become used to over the years. - -Luckily, there's an option to simply use Linux directly on your macOS device -without having to boot the whole device into Linux or having to SSH into another -Linux machine. - -In this post, I use [[https://orbstack.dev/][OrbStack]] to create an Ubuntu Linux machine to take advantage -of the Linux system. - -** Installing OrbStack - -OrbStack has a [[https://orbstack.dev/download][download page]] if you prefer to use =*.dmg= files to install -applications. - -Personally, I prefer to install everything through Homebrew. For OrbStack, run -the following to install the application via Homebrew: - -#+begin_src sh -brew install orbstack -#+end_src - -** Creating a Linux Machine - -Once installed, you can launch OrbStack and create a Linux machine in a matter -of seconds. The creation dialog defaults to Ubuntu. - -#+caption: OrbStack's Linux Machine Creation Page -#+attr_html: :alt A popup within OrbStack to create a new machine with a custom name, distribution, version, and CPU type. -[[https://img.cleberg.net/blog/20240503-ubuntu-on-macos/create.webp]] - -** Launching the Machine - -Once created, the dialog will close and you will be presented with your new list -of machines. Simply double-click on a machine to run it. - -When you run the machine for the first time, it may warn you that a program is -attempting to run a shell script. You can choose to manually inspect this shell -script via the provided path if you wish. When you're comfortable with the -script, you can toggle the =Suppress this message permanently= button and click -OK to run the machine. - -#+begin_quote -*Quick Tip*! - -You will always be able to launch the OrbStack application and control the -machine via the Machines page, but you can also use the OrbStack icon in the -macOS menu bar to quickly control the machine without launching OrbStack itself. -#+end_quote - -** Working in Linux - -Once successful, OrbStack will launch your default terminal and log you into the -Linux machine you created above. - -In the example below, we can see that the machine is using =Linux ubuntu 6.9.6= -and operates similar to a fresh Ubuntu install on bare metal. - -#+caption: Ubuntu CLI -#+attr_html: :alt An example of the Ubuntu CLI, running the "uname -a" command. -[[https://img.cleberg.net/blog/20240503-ubuntu-on-macos/cli.webp]] - -You can also click the machine's folder icon in OrbStack to open the machine's -file system within macOS's native Files app. Within Files, you can double-click -to open any files and they will open in the macOS defaults for those file types -(e.g., TextEdit). - -#+caption: Ubuntu Files -#+attr_html: :alt The Ubuntu machine's files available within the macOS Files app. -[[https://img.cleberg.net/blog/20240503-ubuntu-on-macos/files.webp]] - -Here's an example of opening the =test.md= file in the screenshot above, which -defaults to opening in Xcode on my system. - -#+caption: Ubuntu Files -#+attr_html: :alt An example of editing the test.md file in Xcode. -[[https://img.cleberg.net/blog/20240503-ubuntu-on-macos/xcode.webp]] - -*** Test Examples - -As a quick example of the system, I installed =neofetch=, switched to the =zsh= -shell, and ran a few common commands. - -#+caption: Test Examples -#+attr_html: :alt An example of the date, pwd, and neofetch commands. -[[https://img.cleberg.net/blog/20240503-ubuntu-on-macos/test.webp]] - -** Thoughts - -The installation, creation, and launch processes are seamless and provide an -easy way to test or use Linux on macOS with little to no hassle. - -The shell and file integrations are incredibly snappy and I have not -experienced any lag so far. Further, being able to open files in the -Files app allows for me to use macOS native applications, such as -TextEdit for quick editing without having to resort to other programs -that may not be as familiar to macOS users. - -I love this method and will be happily looking for further use cases to -apply. -#+date: <2024-06-19 Wednesday 08:00:00> -#+title: Migrating Ubuntu GPG Keys to trusted.gpg.d -#+description: Technical instructions to relocate GPG keys from the deprecated trusted.gpg keyring to the supported trusted.gpg.d directory for system security maintenance. -#+slug: deprecated-trusted-gpg-fix - -** System Warning - -When running an update on an Ubuntu system, you may have run into a system -warning that looks like the example below. - -#+begin_src txt -W: https://dl.yarnpkg.com/debian/dists/stable/InRelease: Key is stored in legacy -trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in -apt-key(8) for details. -#+end_src - -While this example references the =yarn= package, the warning message is the -same for any repository using the deprecated =trusted.gpg= key ring. - -The issue arises from managing keys with the =apt-key= command, which utilizes -the =/etc/apt/trusted.gpg= file by default. Instead, Ubuntu has moved to -managing key rings with individual =.gpg= files in the =/etc/apt/trusted.gpg.d/= -directory. - -To fix this issue, let's check to see which keys are using the =trusted.gpg= key -ring and move them into their own dedicated key ring. - -** Finding All Keys in the Keyring - -Let's start by simply listing the keys used by the =apt= commands. To do this, -run the following command. - -#+begin_src sh -sudo apt-key list -#+end_src - -This command will show an output similar to the one below. You may see -additional keys in the =/etc/apt/trusted.gpg.d/= directory - this is where we -will be moving any keys currently found in the =trusted.gpg= key ring. - -In the below example, we can see that this system has four different GPG keys -stored within the =trusted.gpg= key ring. Let's go ahead and move them into -their own files. - -#+begin_src txt -Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead -(see apt-key(8)). - -/etc/apt/trusted.gpg --------------------- -pub rsa2048 2011-08-19 [SC] [expires: 2027-05-24] - 573B FD6B 3D8F BC64 1079 A6AB ABF5 BD82 7BD9 BF62 -uid [ unknown] nginx signing key <[email protected]> - -pub rsa4096 2016-10-05 [SC] - 72EC F46A 56B4 AD39 C907 BBB7 1646 B01B 86E5 0310 -uid [ unknown] Yarn Packaging <[email protected]> -sub rsa4096 2016-10-05 [E] -sub rsa4096 2019-01-02 [S] [expires: 2026-01-23] -sub rsa4096 2019-01-11 [S] [expires: 2026-01-23] - -pub rsa4096 2024-05-29 [SC] - 8540 A6F1 8833 A80E 9C16 53A4 2FD2 1310 B49F 6B46 -uid [ unknown] nginx signing key <[email protected]> - -pub rsa4096 2024-05-29 [SC] - 9E9B E90E ACBC DE69 FE9B 204C BCDC D8A3 8D88 A2B3 -uid [ unknown] nginx signing key <[email protected]> -#+end_src - -** Moving Keys to the Proper Location - -*** Exporting Keys to New Files - -Now that we know the keys, we will need to move them into their own key ring. We -can do this by copying the last eight (8) characters from the key's signature -and exporting it from this key ring into its own. - -Using the yarn example from the beginning, here's the command to move this key -into its own key ring. - -#+begin_src sh -sudo apt-key export 86E50310 | sudo gpg --dearmor -o /etc/apt/trusted.gpg.d/yarn.gpg -#+end_src - -You can repeat this process for any other keys, such as the =nginx= keys in the -example above. - -*** Cleaning Up - -If you run =sudo apt-key list= again, you should see the keys within their own -key rings: - -#+begin_src txt -/etc/apt/trusted.gpg.d/nginx-archive-keyring.gpg ------------------------------------------------- -pub rsa4096 2024-05-29 [SC] - 8540 A6F1 8833 A80E 9C16 53A4 2FD2 1310 B49F 6B46 -uid [ unknown] nginx signing key <[email protected]> - -pub rsa2048 2011-08-19 [SC] [expires: 2027-05-24] - 573B FD6B 3D8F BC64 1079 A6AB ABF5 BD82 7BD9 BF62 -uid [ unknown] nginx signing key <[email protected]> - -pub rsa4096 2024-05-29 [SC] - 9E9B E90E ACBC DE69 FE9B 204C BCDC D8A3 8D88 A2B3 -uid [ unknown] nginx signing key <[email protected]> - -/etc/apt/trusted.gpg.d/yarn.gpg -------------------------------- -pub rsa4096 2016-10-05 [SC] - 72EC F46A 56B4 AD39 C907 BBB7 1646 B01B 86E5 0310 -uid [ unknown] Yarn Packaging <[email protected]> -sub rsa4096 2016-10-05 [E] -sub rsa4096 2019-01-02 [S] [expires: 2026-01-23] -sub rsa4096 2019-01-11 [S] [expires: 2026-01-23] -#+end_src - -Once you have verified that the keys are valid and stored in their own key -rings, you can archive the =trusted.gpg= file and run a system update to test -the new files. - -#+begin_src sh -sudo mv /etc/apt/trusted.gpg /etc/apt/trusted.gpg.bkp -sudo apt update -#+end_src - -Once you've verified that updates work as expected and that the keys are working -as intended, you can delete the =.bkp= file created above. If you're storing -keys that are not easily re-attainable, I suggest keeping the =.bkp= file stored -in a safe location until you are positive that you no longer need it. -#+date: <2024-07-11 Thursday 20:24:02> -#+title: Running Emacs Natively on Apple Silicon iPad -#+description: Procedural instructions for installing Emacs on iPadOS devices with Apple Silicon architecture, including configuration and operational guidance. -#+slug: emacs-on-ipad - -This post describes the process to install and use Emacs on the iPad Air 13-inch -(M2). The iPad used in this post is running iPadOS 17.6. - -** Shell Application - -In order to use Emacs on an iPad, you will need a terminal emulator application. -I recommend [[https://apps.apple.com/us/app/ish-shell/id1436902243][iSH]], since it runs a version of Alpine Linux within the app itself -and will allow you to install packages that you need. - -#+caption: iSH Application -#+attr_html: :alt The iSH shell on iPad. -[[https://img.cleberg.net/blog/20240711-emacs-on-ipad/ish.webp]] - -** Require Packages - -I started by adding the required packages directly within iSH. Emacs should -install dependencies by default, but I include a few other packages that I use -in my terminal as well. - -#+begin_src sh -apk add emacs ripgrep fd findutils -#+end_src - -#+caption: Package Installation -#+attr_html: :alt Showing command "apk add emacs ripgrep rf findutils" within iSH. -[[https://img.cleberg.net/blog/20240711-emacs-on-ipad/dependencies.webp]] - -** Emacs - -Once this is complete, you should be able to run Emacs natively on your iPad. -It's effective, but can be slow at times. - -I attempted to also install Doom Emacs, which technically worked, but was so -incredibly slow and buggy that I was not even able to take screenshots. Someone -smarter than me could likely get it to work with a little tinkering. - -*** MELPA - -You also have to remember to hook up MELPA yourself in the =.emacs= file to be -able to search through their 5700+ packages instead of just ELPA packages. If -you don't, you will only have access to ELPA packages like the ones below. - -#+caption: package-install -#+attr_html: :alt A full list of all packages available when searching MELPA. -[[https://img.cleberg.net/blog/20240711-emacs-on-ipad/melpa.webp]] - -Once you have MELPA, you can install packages like the =dashboard= package shown -below. - -#+caption: emacs-dashboard -#+attr_html: :alt An example of the emacs-dashboard package. -[[https://img.cleberg.net/blog/20240711-emacs-on-ipad/dashboard.webp]] - -*** Speed - -While Emacs will run on my iPad, it's not perfect. The largest issue on my iPad -is speed - loading Emacs takes 6-7 seconds and installing the =magit= package -took 129 seconds. - -I haven't played around enough to optimize loading times and poke around to see -why the network requests take so long, but it's a big enough issue that I -wouldn't see casual Emacs users dealing with the lag. -#+date: <2024-08-12 Mon 12:48:00> -#+title: Essential Org-Mode Features for Productivity -#+description: Detailed overview of essential Org-Mode functionalities focusing on task organization, note-taking, and workflow optimization. -#+slug: org-mode-features - -* Cycling (Folding) - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L7][View this section]] in org-mode. -#+end_quote - -My absolute top-used feature is [[https://orgmode.org/manual/Global-and-local-cycling.html][global and local cycling]] and it's not even -close. Being able to hit =S-TAB= and collapse all headings when opening a file -or needing to see a file's headings is an under appreciated trait. - -** Local Cycling - -When focused on a heading, you can press =TAB= (=org-cycle=) to cycle that -subtree among the states =folded=, =children=, and =subtree=. - -#+begin_src txt -,-> FOLDED -> CHILDREN -> SUBTREE --. -'-----------------------------------' -#+end_src - -** Global Cycling - -If you're looking to cycle more than one subtree or heading at a time, you can -press =S-TAB= or =C-u TAB= to cycle the entire buffer among the states -=overview=, =contents=, and =show all=. - -#+begin_src txt -,-> OVERVIEW -> CONTENTS -> SHOW ALL --. -'--------------------------------------' -#+end_src - -** Default Views - -If you need to set a default view for a certain file, you can run =C-u C-u TAB= -to set the =org-set-startup-visibility=. Alternatively, just put the following -at the top of the buffer: - -#+begin_src org -#+STARTUP: overview -#+STARTUP: content -#+STARTUP: showall -#+STARTUP: show2levels -#+STARTUP: show3levels -#+STARTUP: show4levels -#+STARTUP: show5levels -#+STARTUP: showeverything -#+end_src - -* TODO Lists - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L55][View this section]] in org-mode. -#+end_quote - -Next up on in this post are [[https://orgmode.org/manual/TODO-Items.html][TODO Lists]]. Being able to combine note taking and -reminders was the primary reason I switched to org-mode in the first place. - -TODO lists are more than just the Markdown equivalent of =- [ ] Task=. Instead, -you can utilize org-mode's native functionality to dynamically create TODO -items, have fast access to TODO states, log progress on tasks, clocking work -time, prioritization, breaking down tasks into subtasks, and even using checkbox -formatting as well. - -** Prioritizing Tasks - -One of my favorite ways to separate my tasks are to assign priorities. You can -do this by placing a priority cookie into the headline of a TODO item. - -#+begin_src org -,*** TODO [#A] My Task -,*** TODO [#C] My Other Task -#+end_src - -You can quickly shift priorities with =S-UP= and =S-DOWN=, as well as set the -allowed priorities for a buffer with the following syntax: - -#+begin_src org -#+PRIORITIES: A C B -#+PRIORITIES: 1 10 5 -#+end_src - -** Deadlines - -Plans can be set per task by settings special keywords with a date. You can set -a =DEADLINE= to note when the task will appear in the agenda or set the -=SCHEDULED= variable to note when you plan to start working on the task. - -#+begin_src org -,* TODO My Task -DEADLINE: <2004-02-29 Sun> - -,* My Other Task -SCHEDULED: <2004-12-25 Sat> -#+end_src - -As a side note, I use [[https://www.beorgapp.com/][Beorg]] on iOS to sync and edit my org-mode files on the go. -Within this app, I use the =SCHEDULED= variable by default and rely heavily on -that variable to alert me of tasks with iOS native notifications. - -* Time Stamping - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L106][View this section]] in org-mode. -#+end_quote - -Another great feature are the [[https://orgmode.org/manual/Dates-and-Times.html][dates and times]] functionalities within org-mode. -Timestamps follow this format in org-mode: - -#+begin_src org -,* An active timestamp -<2006-11-01 Wed 19:15> - -,* An inactive timestamp -[2006-11-01 Wed 19:15> - -,* Repeated timestamps -<2006-11-01 Wed 19:15 +1m> - -,* Time range -<2006-11-02 Thu 10:00-12:00> - -,* Date range -<2004-08-23 Mon>--<2004-08-26 Thu> -#+end_src - -In addition to the deadlines mentioned above, you can insert timestamps into any -marker within the buffer with =C-c .= for an active timestamp and =C-c != for an -inactive timestamp. You can read more on [[https://orgmode.org/manual/Creating-Timestamps.html][creating timestamps]] to figure out the -different options available when creating timestamps. - -* Tags - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L137][View this section]] in org-mode. -#+end_quote - -Next up are [[https://orgmode.org/manual/Tags.html][Tags]], which provide a way to document contexts within and across -buffers and files. - -You can assign tags directly to headlines or at the file level and can contain -letters, numbers, underscores, and the =@= symbol. - -#+begin_src org -, -,* Pick fruits off the trees :work: -,** Start with the orange grove :orange:tree: -,*** TODO Pick bananas last :banana: -#+end_src - -** Filtering and Searching by Tag - -You can search for tags with =C-c \= or open the org-agenda with =M-x org-agenda -m= and search for a tag of your choosing. - -* Tables - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L162][View this section]] in org-mode. -#+end_quote - -One of the most inconvenient parts of writing in Markdown was dealing with -tables. In org-mode, [[https://orgmode.org/manual/Tables.html][Tables]] are a breeze due to Emacs's built-in table editor -and formatter. - -** Built-In Table Editor - -With the built-in table editor, press =C-c |= to convert the active region to a -table or create an empty table. - -When focused on a table, press =TAB= to re-align the table. There are more -commands available to re-align, traverse, and edit cells and regions within -tables in Emacs. - -For example, refer to the following table. This table uses the =TBLFM= variable -to define functions that will apply to the cells within the table. When I press -=C-c C-c=, the table cells updated to their resulting values. - -| N | N^2 | N^3 | N^4 | sqrt(n) | sqrt[4](N) | -|---+-----+-----+-----+-----------+------------| -| / | < | | > | < | > | -| 1 | 1 | 1 | 1 | 1 | 1 | -| 2 | 4 | 8 | 16 | 1.4142136 | 1.1892071 | -| 3 | 9 | 27 | 81 | 1.7320508 | 1.3160740 | -|---+-----+-----+-----+-----------+------------| -#+TBLFM: $2=$1^2::$3=$1^3::$4=$1^4::$5=sqrt($1)::$6=sqrt(sqrt(($1))) - -** Spreadsheet - -If you spend a lot of time in spreadsheets, you'll appreciate the Emacs Calc -package, which Emacs uses to implement spreadsheet-like capabilities within -org-mode tables. - -Read through the [[https://orgmode.org/manual/The-Spreadsheet.html][spreadsheet]] documentation to learn more about field references -(=@ROW$COLUMN=), range references (=$1..$3=), coordinates, formulas, and more. - -For example, refer to the following table. Here is a table that computes the -Taylor series of degree n at location x for a couple of functions. You can clear -the values out of the =Result= column for each row, press =C-c C-c=, and watch -as the table re-calculates the results for each. - -|---+-------------+---+-----+--------------------------------------| -| | Func | n | x | Result | -|---+-------------+---+-----+--------------------------------------| -| # | exp(x) | 1 | x | 1 + x | -| # | exp(x) | 2 | x | 1 + x + x^2 / 2 | -| # | exp(x) | 3 | x | 1 + x + x^2 / 2 + x^3 / 6 | -| # | x^2+sqrt(x) | 2 | x=0 | x*(0.5 / 0) + x^2 (2 - 0.25 / 0) / 2 | -| # | x^2+sqrt(x) | 2 | x=1 | 2 + 2.5 x - 2.5 + 0.875 (x - 1)^2 | -| * | tan(x) | 3 | x | x pi / 180 + 5.72e-8 x^3 pi^3 | -|---+-------------+---+-----+--------------------------------------| -#+TBLFM: $5=taylor($2,$4,$3);n3 - -Alternatively, you can also refer to the following table. This table will update -to different values based on the =TBLFM= I select when I'm pressing =C-c C-c=. -The results are =[1,2]= when focused on the first line and =[2,4]= when focused -on the second line. - -| x | y | -|---+---| -| 1 | 2 | -| 2 | 4 | -#+TBLFM: $2=$1*1 -#+TBLFM: $2=$1*2 - -* Source Code Blocks - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L232][View this section]] in org-mode. -#+end_quote - -** Introduction to Source Code Blocks - -If you run a technical blog, write code frequently, or like to take notes with -source code examples, you will appreciate the [[https://orgmode.org/manual/Working-with-Source-Code.html][source code]] functionality of -org-mode. - -With this feature, org-mode can manage the source code you define with features -such as editing, formatting, extracting, exporting, and publishing. -Additionally, you can compile and execute source code dynamically within the -org-mode file or buffer. - -A full source code block uses the following structure: - -#+begin_src org -,#+NAME: <name> -,#+BEGIN_SRC <language> <switches> <header arguments> - <body> -,#+END_SRC -#+end_src - -You can also use inline blocks: - -#+begin_src org -src_<language>[<header arguments>]{<body>} -#+end_src - -** Editing Source Code Blocks - -When focused on a code block, press =C-c'= to edit the code block in a special -editor. Press =C-x C-x= to save the buffer and =C-c '= again to close the -buffer. - -** Syntax Highlighting and Formatting - -Emacs provides syntax highlighting by default within org-mode's source code -blocks. Org-mode will copy the text to a temporary buffer, highlight it using -the major mode relevant to the language (e.g., [[https://www.gnu.org/software/emacs/manual/html_mono/ccmode.html][CC Mode]]), and then return the -resulting highlighted text. - -** Buffer Evaluation - -By default, org-mode will only evaluate Emacs Lisp code blocks. You will need to -enable other [[https://orgmode.org/manual/Languages.html][languages]] in order to evaluate code blocks written in languages -other than elisp. - -When focused on a code block, you can execute the block with =C-c C-c=. The -results of the evaluation will appear below the code block in a =RESULTS= block. - -For example, here is a code block in elisp that I have written and evaluated with -org-mode inside this blog post. I will press =C-c C-c= and you will see the -results below the code block. - -#+begin_src elisp -(defun greet-me () - (message "Hello, world!")) - -(greet-me) -#+end_src - -#+begin_src org -,#+RESULTS: -: Hello, world! -#+end_src - -* Exporting and Publishing - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L302][View this section]] in org-mode. -#+end_quote - -I would be remiss if I did not mention the native [[https://orgmode.org/manual/Exporting.html][exporting and publishing]] -functionality within Emacs and org-mode. - -** Built-In Publishing - -This functionality allows you to translate Org to the following formats -(additional formats may be available via external packages): - -- ascii (ASCII format) -- beamer (LaTeX Beamer format) -- html (HTML format) -- icalendar (iCalendar format) -- latex (LaTeX format) -- md (Markdown format) -- odt (OpenDocument Text format) -- org (Org format) -- texinfo (Texinfo format) -- man (Man page format) - - You can export with =C-c C-h= and then select your preferred destination - format. For example, an export from org to HTML as a file would use =C-c C-e h - h=. - -** External Publishing Tools - -If the native functionality isn't useful enough for you, there are a myriad of -external [[https://orgmode.org/tools.html][tools]], including [[https://orgmode.org/worg/org-blog-wiki.html][blogs and wikis]], that work with org-mode. - -* Agenda - -#+begin_quote -[[https://github.com/ccleberg/cleberg.net/blob/main/content/blog/2024-08-11-org-mode-features.org?plain=1#L336][View this section]] in org-mode. -#+end_quote - -Last, but not least, are [[https://orgmode.org/manual/Agenda-Views.html][Agenda Views]]. With agenda views, you can easily view -your agenda of TODO items, scheduled items, projects, etc. across your -collection of org-mode files. - -Org-mode will extract all of this information from your org files -(=org-agenda-files=) and display it within the agenda buffer. - -You can open the agenda with =M-x org-agenda=. Once inside the buffer, you can -use shortcuts in the [[https://orgmode.org/manual/Agenda-Dispatcher.html][Agenda Dispatcher]] to quickly view calendars, TODOs, create -items, filter items, and more. -#+date: <2024-08-25 Sunday 09:45:30> -#+title: Automate Email Sentiment Analysis with n8n -#+description: Detailed procedural steps for configuring an n8n workflow to perform sentiment analysis on incoming email messages, enabling automated classification based on sentiment. -#+slug: n8n-sentiment-analysis - -* n8n - -This guide will show you how to self-host [[https://n8n.io/][n8n]], a workflow automation platform, -and use it to create a workflow that automatically analyzes the sentiment of all -incoming emails on your account. - -This is a completely free process that only requires that you have access to (1) -an email account with IMAP/SMTP options and (2) a computer or machine where you -can install and use Docker. - -** Installation - -To get started, read the [[https://github.com/n8n-io/self-hosted-ai-starter-kit][self-hosted-ai-starter-kit]] project README or simply -clone the repository and set it up with Docker using the command below. - -#+begin_src sh -git clone https://github.com/n8n-io/self-hosted-ai-starter-kit.git -cd self-hosted-ai-starter-kit -docker compose --profile cpu up -#+end_src - -This will clone the repository, start the stack of Docker containers with -=compose=, and make the n8n web page available at [[https://localhost:5678]]. The -first run will ask you to configure the administrator account for n8n. - -** Reverse Proxy - -If you want to use n8n from a public domain name, you'll need to configure a -reverse proxy. I use Nginx on my server for reverse proxies. Nginx configuration -locations and practices vary by distribution, but the following commands will -show you my general reverse proxy configuration. - -#+begin_src sh -cd /etc/nginx/conf.d -nano n8n.conf -#+end_src - -#+begin_src conf -server { - listen 443 ssl; - listen [::]:443 ssl; - http2 on; - server_name n8n.example.com; - - # SSL - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - ssl_trusted_certificate /etc/letsencrypt/live/example.com/chain.pem; - - # reverse proxy - location / { - set $upstream_n8n http://127.0.0.1:5678; - - proxy_set_header Remote-User $user; - proxy_set_header Remote-Email $email; - proxy_set_header Remote-Groups $groups; - - client_body_buffer_size 128k; - proxy_next_upstream error timeout invalid_header http_500 http_502 http_503; - - send_timeout 5m; - proxy_read_timeout 360; - proxy_send_timeout 360; - proxy_connect_timeout 360; - - proxy_set_header Host $host; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection upgrade; - proxy_set_header Accept-Encoding gzip; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - } - -# HTTP redirect -server { - listen 80; - listen [::]:80; - server_name n8n.example.com; - include custom.d/letsencrypt.conf; - - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } -} -#+end_src - -Simply restart Nginx to ensure the new configuration is in-effect. - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src - -** Workflow Configuration - -You can open the included workflow at -[[http://localhost:5678/workflow/srOnR8PAY3u4RSwb]] or simply open the web interface -and create a new configuration. - -#+caption: n8n Workflow -#+attr_html: :alt A canvas view of the worklow, showing an email trigger, if statement, sentiment analysis via Ollama, and send email action. -[[https://img.cleberg.net/blog/20240825-n8n-sentiment-analysis/workflow.webp]] - -This workflow contains the following nodes: -1. Email Trigger (IMAP) - + Create an IMAP credential with your email's IMAP settings to allow n8n to - monitor for new emails. -2. If - + Check ={{ $json.subject }}= to see if it =contains= "n8n Sentiment - Analysis" to ensure we don't re-check our own emails. -3. Sentiment Analysis - + Analyze the ={{ $json.textPlain }}= input coming from each email. - + Ensure you have =Include Detailed Results= enabled so that we can access - the confidence and strength variables. -4. Ollama Chat Model - + The Docker stack we used includes Ollama and Llama3, which provide the - easiest way to test this workflow. -5. Send Email - + Create an SMTP credential to allow n8n to send emails. - + Subject: =n8n Sentiment Analysis: {{ $json.sentimentAnalysis.category }}= - + Email Format: =Text= - + Text (Expression): This can contain anything you want, but be sure to - include the variables ={{ $json.sentimentAnalysis.category }}=, ={{ - $json.sentimentAnalysis.strength }}=, and ={{ - $json.sentimentAnalysis.confidence }}=. - + In the additional options, I enabled the =Append n8n Attribution= option in - the screenshots below. - -** Testing - -You can use the =Test Workflow= button at the bottom of the canvas area to test -the workflow. This relies on receiving new messages in your inbox, so be sure to -send yourself a test email! - -** Results - -After testing each step noted above, n8n provided the results below - it works! - -#+caption: Positive Results -#+attr_html: :alt An example showing that n8n marked an email as "Positive". -[[https://img.cleberg.net/blog/20240825-n8n-sentiment-analysis/positive_results.webp]] - -#+caption: Negative Results -#+attr_html: :alt An example showing that n8n marked an email as "Negative". -[[https://img.cleberg.net/blog/20240825-n8n-sentiment-analysis/negative_results.webp]] - -While this isn't anything earth-shattering, it does show easy it is to get -started with n8n and large language models in a self-hosted environment. -#+date: <2024-09-20 Friday 13:38:52> -#+title: Linux Server Monitoring with Prometheus & Grafana Cloud -#+description: Stepwise method for deploying Prometheus with Docker to monitor Linux servers and integrating Grafana Cloud for visualization and analysis of collected metrics. -#+slug: prometheus-grafana-cloud - -This tutorial will guide you through the process of: - -1. Configuring a free Grafana cloud account. -2. Installing Prometheus to store metrics. -3. Installing Node Exporter to export machine metrics for Prometheus. -4. Installing Nginx Exporter to export Nginx metrics for Prometheus. -5. Visualizing data in Grafana dashboards. -6. Configure alerts based on Grafana metrics. - -* Grafana Cloud - -To get started, visit the [[https://grafana.com/auth/sign-up/create-user][Grafana website]] and create a free account. - -** Prometheus Data Source - -By default, a Prometheus data source should exist in your data sources page -(=$yourOrg.grafana.net/connections/datasources=). If not, add a new data source -using the Prometheus type. - -Once you have a valid Prometheus data source, open the data source and note the -following items: - -| Data | Example | -|-----------------------+---------------------------------------------------------------------| -| Prometheus Server URL | https://prometheus-prod-13-prod-us-east-0.grafana.net/api/prom/push | -|-----------------------+---------------------------------------------------------------------| -| User | 1234567 | -|-----------------------+---------------------------------------------------------------------| -| Password | configured | - -** Cloud Access Policy Token - -Now let's create an access token in Grafana. Navigate to the Administration -> Users and Access > Cloud Access Policies page and create an access policy. - -The =metrics > write= scope must be enabled within the access policy you choose. - -Once you have an access policy with the correct scope, click the Add Token -button and be sure to copy and save the token since it will disappear once the -modal window is closed. - -** Dashboards - -Finally, let's create a couple dashboards so that we can easily explore the data -that we will be importing from the server. - -I recommend importing the following dashboards: - -- [[https://grafana.com/grafana/dashboards/1860-node-exporter-full/][Node Exporter Full]] -- [[https://github.com/nginxinc/nginx-prometheus-exporter/blob/main/grafana][nginx-prometheus-exporter]] -- Prometheus 2.0 Stats - -Refer to the bottom of the post for dashboard screenshots! - -* Docker - -On the machine that you want to observe, make sure Docker and Docker Compose are -installed. This tutorial will be using Docker Compose to create a group of -containers that will work together to send metrics to Grafana. - -Let's start by creating a working directory. - -#+begin_src sh -mkdir ~/prometheus && \ -cd ~/prometheus && \ -nano compose.yml -#+end_src - -Within the =compose.yml= file, let's paste the following: - -#+begin_src yaml -# compose.yml - -networks: - monitoring: - driver: bridge - -volumes: - prometheus_data: {} - -services: - nginx-exporter: - image: nginx/nginx-prometheus-exporter - container_name: nginx-exporter - restart: unless-stopped - command: - - '--nginx.scrape-uri=http://host.docker.internal:8080/stub_status' - expose: - - 9113 - networks: - - monitoring - extra_hosts: - - host.docker.internal:host-gateway - - node-exporter: - image: prom/node-exporter:latest - container_name: node-exporter - restart: unless-stopped - volumes: - - /proc:/host/proc:ro - - /sys:/host/sys:ro - - /:/rootfs:ro - command: - - '--path.procfs=/host/proc' - - '--path.rootfs=/rootfs' - - '--path.sysfs=/host/sys' - - '--collector.filesystem.mount-points-exclude=^/(sys|proc|dev|host|etc)($$|/)' - expose: - - 9100 - networks: - - monitoring - - prometheus: - image: prom/prometheus:latest - container_name: prometheus - restart: unless-stopped - volumes: - - ./prometheus.yml:/etc/prometheus/prometheus.yml - - prometheus_data:/prometheus - command: - - '--config.file=/etc/prometheus/prometheus.yml' - - '--storage.tsdb.path=/prometheus' - - '--web.console.libraries=/etc/prometheus/console_libraries' - - '--web.console.templates=/etc/prometheus/consoles' - - '--web.enable-lifecycle' - expose: - - 9090 - networks: - - monitoring -#+end_src - -#+begin_src sh -sudo docker compose up -d -#+end_src - -#+begin_quote -I'm not sure if it made a difference but I also whitelisted port 8080 on my -local firewall with =sudo ufw allow 8080=. -#+end_quote - -Next, let's create a =prometheus.yml= configuration file. - -#+begin_src sh -nano prometheus.yml -#+end_src - -#+begin_src yaml -# prometheus.yml - -global: - scrape_interval: 1m - -scrape_configs: - - job_name: 'prometheus' - scrape_interval: 1m - static_configs: - - targets: ['localhost:9090'] - - - job_name: 'node' - static_configs: - - targets: ['node-exporter:9100'] - - - job_name: 'nginx' - scrape_interval: 5s - static_configs: - - targets: ['nginx-exporter:9113'] - -remote_write: - - url: 'https://prometheus-prod-13-prod-us-east-0.grafana.net/api/prom/push' - basic_auth: - username: 'prometheus-grafana-username' - password: 'access-policy-token' -#+end_src - -** Nginx - -To enable to the Nginx statistics we need for the nginx-exporter container, we -need to modify the Nginx configuration on the host. - -More specifically, we need to create a path for the =stub_status= to be returned -when we query port 8080 on our localhost. - -#+begin_src sh -sudo nano /etc/nginx/conf.d/default.conf -#+end_src - -#+begin_src conf -server { - listen 8080; - listen [::]:8080; - - location /stub_status { - stub_status; - } -} -#+end_src - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src - -** Debugging - -At this point, everything should be running smoothly. If not, here are a few -areas to check and see if any obvious errors exist. - -Nginx: Curl the stub_status from the Nginx web server on the host machine to see -if Nginx and stub_status are working properly. - -#+begin_src sh -curl http://127.0.0.1:8080/stub_status - -# EXPECTED RESULTS: -Active connections: 101 -server accepts handled requests - 7510 7510 9654 -Reading: 0 Writing: 1 Waiting: 93 -#+end_src - -Nginx-Exporter: Curl the exported Nginx metrics. - -#+begin_src sh -# Figure out the IP address of the Docker container -sudo docker network inspect grafana_monitoring - -... -"Name": "nginx-exporter", -"EndpointID": "ef999a53eb9e0753199a680f8d78db7c2a8d5f442626df0b1bb945f03b73dcdd", -"MacAddress": "02:42:c0:a8:40:02", -"IPv4Address": "192.168.64.2/20", -... - -# Curl the exported Nginx metrics -curl 192.168.64.2:9113/metrics - -# EXPECTED RESULTS: -... -# HELP go_gc_duration_seconds A summary of the pause duration of garbage collection cycles. -# TYPE go_gc_duration_seconds summary -go_gc_duration_seconds{quantile="0"} 2.9927e-05 -go_gc_duration_seconds{quantile="0.25"} 4.24e-05 -go_gc_duration_seconds{quantile="0.5"} 4.8531e-05 -... -#+end_src - -Node-Exporter: Curl the exporter node machine metrics. - -#+begin_src sh -# Curl the exported Node metrics -curl 192.168.64.3:9100/metrics - -# EXPECTED RESULTS: -... -# HELP promhttp_metric_handler_requests_total Total number of scrapes by HTTP status code. -# TYPE promhttp_metric_handler_requests_total counter -promhttp_metric_handler_requests_total{code="200"} 47 -promhttp_metric_handler_requests_total{code="500"} 0 -promhttp_metric_handler_requests_total{code="503"} 0 -... -#+end_src - -Grafana: Open the Explore panel and look to see if any metrics are coming -through the Prometheus data source. If not, something on the machine is -preventing data from flowing through. - -* Alerts & IRM - -Now that we have our data connected and visualized, we can define alerting rules -and determine what Grafana should do when an alert is triggered. - -** OnCall - -#+caption: OnCall -#+attr_html: :alt View of the Grafana OnCall dashboard with metrics. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/oncall.webp]] - -Within the Alerts & IRM section of Grafana (=/alerts-and-incidents=), open the -Users page. - -The Users page allows you to configure user connections such as: - -- Mobile App -- Slack -- Telegram -- MS Teams -- iCal -- Google Calendar - -In addition to the connections of each user, you can specify how each user or -team is alerted for Default Notifications and Important Notifications. - -Finally, you can access the Schedules page within the OnCall module to schedule -users and teams to be on call for specific date and time ranges. For my -purposes, I put myself on-call 24/7 so that I receive all alerts. - -#+caption: User Information -#+attr_html: :alt View of the grafanafd88 user with notification preferences. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/irm_user_info.webp]] - -** Alerting - -#+caption: Alerting Insights -#+attr_html: :alt A dashboard with the current grafana-managed alert rules. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/alerting_insights.webp]] - -Now that we have defined users and team associated with an on-call schedule and -configured to receive the proper alerts, let's define a rule that will generate -alerts. - -Within the Alerting section of the Alerts & IRM module, you can create alert -rules, contact points, and notification policies. - -Let's start by opening the Alert Rules page and click the New Alert Rule button. - -As shown in the image below, we will create an alert for high CPU temperature by querying the =node_hwmon_temp_celsius= metric from our Prometheus data source. - -Next, we will set the threshold to be anything above 50 (degrees Celsius). -Finally, we will tell Grafana to evaluate this every 1 minute via our Default -evaluation group. This is connected to our Grafana email, but can be associated -with any notification policy. - -#+caption: New Alert Rule -#+attr_html: :alt All available seetings when creating a new alert. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/new_alert.webp]] - -When the alert fires, it will generate an email (or whatever notification policy -you assigned) and will look something like the following image. - -#+caption: Alerting Example -#+attr_html: :alt An email showing that "High CPU Temps" alert is firing. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/email_alert.webp]] - -** Dashboards - -As promised above, here are some dashboard screenshots based on the -configurations above. - -#+caption: Nginx Dashboard -#+attr_html: :alt Updated dashboard based on the new alert created above. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/dashboard_nginx.webp]] - -#+caption: Node Dashboard -#+attr_html: :alt Metrics of server nodes, including CPU, network, and memory. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/dashboard_node.webp]] - -#+caption: OnCall Dashboard -#+attr_html: :alt Full OnCall dashboard with metrics for alerts, mean time to respond, and more. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/dashboard_oncall.webp]] - -#+caption: Prometheus Dashboard -#+attr_html: :alt Dashboard showing Prometheus metrics, including scrape duration, head shunks, reload count, and more. -[[https://img.cleberg.net/blog/20240920-prometheus-grafana-cloud/dashboard_prometheus.webp]] -#+date: <2024-09-23 Monday 19:52:20> -#+title: Self-Hosting Guide: Transmission BitTorrent Client -#+description: Comprehensive setup instructions for installing and configuring the Transmission BitTorrent client on a Linux server, including securing remote access through Nginx reverse proxy. -#+slug: self-hosting-transmission - -#+begin_quote -If you're torrenting anything sensitive, I *highly* recommend you use a VPN. -Something like mullvad-cli is incredibly simple to use and can be configured to -have a "killswitch" or "lockdown mode" to ensure that if the VPN disconnects, -your traffic won't be leaked to your ISP. -#+end_quote - -* Transmission - -[[https://transmissionbt.com/][Transmission]] is a cross-platform bittorrent client that supports running a -[[https://linux.die.net/man/1/transmission-remote][remote control utility]], a [[https://linux.die.net/man/1/transmission-daemon][daemon service]] for running as a background service, -and a [[https://linux.die.net/man/1/transmission-cli][command-line client]]. - -Since I love torrenting Linux ISOs and providing them back to the community, -let's walk through a tutorial of setting up Transmission on a headless server -and connecting it to a domain name (=transmission.example.com=) so that we can -manage our torrents remotely. - -This tutorial assumes you have a Linux machine, have Nginx installed, and have a -domain name pointing at your Linux machine. - -** Installation - -First, let's install a couple Transmission packages on the system. We don't need -the GUI components, so we'll only install the daemon and command line interface -utilities. - -#+begin_src sh -sudo apt install transmission-cli transmission-common transmission-daemon -#+end_src - -You will need to run the program to initialize the files before you can edit the -configurations, so let's run it and end the process. - -#+begin_src sh -# Run the program -transmission-daemon -e ~/.local/log/transmission.log - -# End the program after it finishes running -transmission-remote --exit -#+end_src - -** Configuration - -Now that we've run the program for the first time and initialized the relevant -files, let's edit those files. - -#+begin_quote -If you edit the files while Transmission is running, your changes won't be -saved! Make sure to end the service, update the configuration files, and restart -the service. -#+end_quote - -To start, let's edit the main configuration file. - -#+begin_src sh -nano ~/.config/transmission-daemon/settings.json -#+end_src - -Within this file, I suggesting skimming *every* option and determining if you -want to change any of those options. - -For remote access, we will focus on the following =rpc= options. This -configuration will not require authentication, will allow any device with access -(I suggest that you have a firewall restricting access) to access the service -(="rpc-bind-access": "0.0.0.0"=), will open the service on port =9091=, and will -whitelist a few LAN IPs (="rpc-whitelist": -"127.0.0.1,::1,192.168.0.98,192.168.0.97"=). - -#+begin_src json -{ - ... - "rpc-authentication-required": false, - "rpc-bind-address": "0.0.0.0", - "rpc-enabled": true, - "rpc-host-whitelist": "", - "rpc-host-whitelist-enabled": true, - "rpc-password": "{7fc02520b97e054f7a15274c7cfafe3cd7330169.OQUAUS4", - "rpc-port": 9091, - "rpc-socket-mode": "0750", - "rpc-url": "/transmission/", - "rpc-username": "", - "rpc-whitelist": "127.0.0.1,::1,192.168.0.98,192.168.0.97", - "rpc-whitelist-enabled": true, - ... -} -#+end_src - -Once you've finished configuring the service, start the service up again. - -#+begin_src sh -transmission-daemon -e ~/.local/log/transmission.log -#+end_src - -At this point, you should be able to access the website at =localhost:9091= (if -you're browsing on the machine where Transmission is running) or -=$server_ip:9091= (if you're browsing from a different LAN device). - -If you want to make further changes to Transmission's configuration, I suggest -doing so now. Once you start working on remote access via a reverse proxy, -you'll be adding an additional layer of complexity that bring in more confusion -when errors occur. - -#+begin_quote -NOTE: If you are trying to initialize =transmission-daemon= via =systemd= -instead of using the manually-executed command above, you may notice that the -service will timeout and fail to start. -#+end_quote - -To fix this timeout issue, you need to edit the service file and change -=Type=notify= to =Type=simple=. - -#+begin_src shell -# Command to edit the service file: -sudo systemctl edit --full transmission-daemon.service - -# Make the edit noted above and then reload the service file with this command: -sudo systemctl daemon-reload -sudo systemctl enable transmission-daemon.service -sudo systemctl start transmission-daemon.service -#+end_src - -* Reverse Proxy - -Now that the service is running and configured properly, let's work on remote -access. - -This tutorial will use Nginx, but you can use any reverse proxy or something -like Cloudflare Tunnels if that's your thing. - -** Configuration - -If you have Nginx installed, you should have either the =/etc/nginx/conf.d= or -=/etc/nginx/sites-available= directories available to create website -configuration files. This tutorial assumes the =conf.d= structure, but it's -essentially the same except using the =sites-available= structure requires you -to symlink your files into the =sites-enabled= directory. - -Let's start by creating the website configuration file. - -#+begin_src sh -sudo nano /etc/nginx/conf.d/transmission.conf -#+end_src - -Within the file, you will need a configuration similar to the code below. Note -that this uses SSL and requires a valid TLS/SSL certificate. You can use [[https://letsencrypt.org/][Let's -Encrypt]] if you don't have a certificate yet. - -#+begin_src conf -server { - listen 443 ssl; - listen [::]:443 ssl; - http2 on; - server_name transmission.example.com; - - # SSL - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - ssl_trusted_certificate /etc/letsencrypt/live/example.com/chain.pem; - - # reverse proxy - location / { - set $upstream_transmission http://localhost:9091; - proxy_pass $upstream_transmission; - proxy_pass_header X-Transmission-Session-Id; - } -} - -# HTTP redirect -server { - listen 80; - listen [::]:80; - server_name transmission.example.com; - - if ($host ~ ^[^.]+\.example\.com) { - return 301 https://$host$request_uri; - } -} -#+end_src - -Once you've saved the configuration file, restart the Nginx web server to enable -the remote access connection. - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src - -At this point, Transmission should now be available at -=transmission.example.com=, same as it's available on the LAN. - -#+begin_quote -Pro Tip: If you dislike something about the website UI, you can edit the -website's files in the =/usr/share/transmission/public_html/= directory. You can -modify the HTML, CSS, and JS files in this directory. -#+end_quote -#+date: <2024-10-31 Thursday 11:01:05> -#+title: Ollama Code Assistant Setup in VS Codium -#+description: Technical overview and configuration guide for incorporating Ollama as a code assistance tool within VS Codium and VS Code editors to enhance development workflows. -#+slug: continue-ollama-code-assistant - -* Background - -As someone who doesn't do software development full time and intends to actually -enjoy it as a hobby, I've been interested in the /concept/ of code assistants -for a while. However, I had a few issues: - -1. I'm not a full-time developer, so I wanted to actually learn all the various - features and rules of the projects I was building. -2. The quality was quite low until recently. -3. I wanted to use an open-source solution. Ideally, one with a free tier so - that I could test it before paying for a subscription. - -I recently discovered [[https://www.continue.dev/][Continue]], which allows for local LLM configurations via -[[https://ollama.com/][Ollama]], so I've decided to try it out and see how helpful a code assistant can -really be for someone like me, who doesn't do this professionally. - -* Installation - -Installation is a quick and painless process if you already have Ollama -installed, but I'll assume that we're starting from scratch. - -** Ollama - -First, install Ollama for your system. For macOS devices, I'd recommend using -Homebrew via the following command. However, you can also visit their website -and install the software manually. - -#+begin_src sh -brew install ollama -brew services start ollama -#+end_src - -Next, we will need to install the models requested by the Continue extension. By -default, Continue asks you to install the =llama3.1:8b= and =starcoder2:3b= -models. However, you can customize the configuration to specify different -models, if preferred. - -#+begin_src sh -ollama pull llama3.1:8b -ollama pull starcoder2:3b -#+end_src - -At this point, Ollama should be running on your local machine and have two -models available for use. - -You can test this by visiting =http://localhost:11434/= in your browser or use -cURL in your shell: - -#+begin_src sh -curl http://localhost:11434 - -# If running, the response will look like this: -# Ollama is running -#+end_src - -** Continue - -To get started with using Ollama as a code assistant in VS Codium, you'll first -need to install the Continue extension. This extension is available for free on -the Visual Studio Code marketplace and can be easily installed via the built-in -Extension view. - -Follow these steps: -1. Open VS Codium and navigate to the Extensions view by clicking on the square - icon next to the file menu or pressing =Ctrl+Shift+X= (Windows/Linux) or - =Cmd+Shift+X= (Mac). -2. Search for "Continue" in the Extensions marketplace. -3. Click on the Continue extension and click Install. - -Once installed, restart VS Codium to ensure that the extension is properly -loaded. - -* Continue: Extension Configuration - -When you first install Continue, it will ask which service you'll be using. If -you select Ollama, it will check to make sure Ollama is running and you have -installed the two default models from Ollama. - -After this initial setup, you can open the =config.json= file by pressing =Cmd + -p= and entering => Continue: Open config.json=. This will show a config such as -the following: - -#+begin_src json -{ - "models": [ - { - "title": "Llama 3.1 8B", - "provider": "ollama", - "model": "llama3.1:8b" - }, - { - "model": "claude-3-5-sonnet-20240620", - "provider": "anthropic", - "apiKey": "", - "title": "Claude 3.5 Sonnet" - } - ], - "tabAutocompleteModel": { - "title": "Starcoder 3b", - "provider": "ollama", - "model": "starcoder2:3b" - }, - "customCommands": [ - { - "name": "test", - "prompt": "{{{ input }}}\n\nWrite a comprehensive set of unit tests for the selected code. It should setup, run tests that check for correctness including important edge cases, and teardown. Ensure that the tests are complete and sophisticated. Give the tests just as chat output, don't edit any file.", - "description": "Write unit tests for highlighted code" - } - ], - "contextProviders": [ - { - "name": "code", - "params": {} - }, - { - "name": "docs", - "params": {} - }, - { - "name": "diff", - "params": {} - }, - { - "name": "terminal", - "params": {} - }, - { - "name": "problems", - "params": {} - }, - { - "name": "folder", - "params": {} - }, - { - "name": "codebase", - "params": {} - } - ], - "slashCommands": [ - { - "name": "edit", - "description": "Edit selected code" - }, - { - "name": "comment", - "description": "Write comments for the selected code" - }, - { - "name": "share", - "description": "Export the current chat session to markdown" - }, - { - "name": "cmd", - "description": "Generate a shell command" - }, - { - "name": "commit", - "description": "Generate a git commit message" - } - ], - "embeddingsProvider": { - "provider": "ollama", - "model": "nomic-embed-text" - } -} -#+end_src - -You can modify this file with many different customizations. Refer to the -[[https://docs.continue.dev/customize/config][Configuration options]] page for more information. - -* Use Cases - -While I'm sure there are a ton of use cases that I can't think of, I decided to -test it out with this blog and some basic Python scripts I am currently using. -Here are the most common ones I've used so far: - -- Improving README documentation -- Refactor my =salary_visualization.py= script to align with PEP8. -- Auto-complete thoughts and suggest further ideas for topics in this blog post. - -As an example, the following list of possible use cases was auto-generated by -Continue: - -- Auto-complete function names and variables: With Ollama enabled, typing a few - characters into the editor will suggest matching functions or variables from - the entire project. -- Code suggestions for common tasks: Ollama can provide suggestions for common - programming tasks, such as converting types or formatting code. -- Live coding assistance: As you type, Ollama can offer live suggestions and - corrections to help ensure your code is correct. - -** Screenshots - -Below are a few screenshots from my current VS Codium window: - -#+caption: Available Continue Commands -#+attr_html: :alt List of commands available from the Continue package. -[[https://img.cleberg.net/blog/20241031-continue-ollama-code-assistant/continue_commands.webp]] - -#+caption: Continue Fullscreen Chat Window -#+attr_html: :alt Continue chat window in full screen mode. -[[https://img.cleberg.net/blog/20241031-continue-ollama-code-assistant/continue_fullscreen.webp]] - -#+caption: Inline Hotkeys -#+attr_html: :alt View of the Add to chat (Cmd+L) and Edit highlighted code (Cmd+I) options when typing inline. -[[https://img.cleberg.net/blog/20241031-continue-ollama-code-assistant/continue_inline_hotkeys.webp]] - -#+caption: Inline Editing Suggestions -#+attr_html: :alt Highlighted red and green sections showing suggestions from the agent. -[[https://img.cleberg.net/blog/20241031-continue-ollama-code-assistant/continue_inline.webp]] - -#+caption: Sidebar Context Window -#+attr_html: :alt View of the sidebar context window open side-by-side with an edited file. -[[https://img.cleberg.net/blog/20241031-continue-ollama-code-assistant/continue_sidebar.webp]] - -* Conclusion - -As it stands, it seems that the current iteration of code completion and review -models from Ollama are quite good for my use case. In particular, it is able to -suggest logical continuations of my thoughts in a blog post, generate accurate -documentation based on my files, explain code to me with references within the -project, and align my existing files to standards. - -However, it is not perfect. I have noticed that it often goes off in a random -direction, unrelated to the intent of what I'm writing (either blogging or -programming). It also struggles to understand the full context without clear, -specific, repeated instructions to refer to certain files, standards, etc. while -suggesting improvements. - -All together, I think it's useful enough to suggest as an add-on tool, but I -would be highly skeptical of any suggestions it provides. -#+date: <2024-12-29 Sun 17:45:00> -#+title: Self-Hosting Guide: The Lounge (IRC) -#+description: Step-by-step instructions for installing and configuring The Lounge IRC web client on Linux systems utilizing Docker Compose to provide persistent and secure chat access. -#+slug: self-hosting-the-lounge - -* The Lounge - -[[https://thelounge.chat/][The Lounge]] is a self-hosted IRC client for the web, which supports a lot of -desirable features for a modern IRC client. The Lounge supports push -notifications, link previews, file uploads, always connected, multi-user -support, and is available as a PWA for mobile devices. - -I wanted to write this as I had written a post about [[https://cleberg.net/blog/self-hosting-convos.html][self-hosting Convos]] and -have recently migrated over to The Lounge instead. - -If you'd like to try a demo first, head over to [[https://demo.thelounge.chat/][the official demo website]]. - -** Installation (Docker) - -I install everything I can via Docker, so this tutorial will install The Lounge -with the Docker Compose platform. - -You can find the official docker version of The Lounge's repository on GitHub at -[[https://github.com/thelounge/thelounge-docker][thelounge-docker]]. - -To start, let's create a directory for this app and create the =compose.yml= file. - -#+begin_src shell -mkdir thelounge -cd thelounge -nano compose.yml -#+end_src - -Within this configuration file, you can paste the content below and customize as -needed. If you want to use a different port on your machine, change the first -port on the =9000:9000= line. Additionally, you may move the volume to a -different location if required. - -#+begin_src yaml -services: - thelounge: - image: ghcr.io/thelounge/thelounge:latest - container_name: thelounge - ports: - - "9000:9000" - restart: always - volumes: - - ./.thelounge:/var/opt/thelounge -#+end_src - -Save and close the file and you can now launch the service. - -#+begin_src shell -sudo docker compose up -d -#+end_src - -The service is now available at =localhost:9000= or =machine_ip:9000= if you're -browsing from a different device. Don't forget to allow the port through your -machine's firewall, if you have one enabled. - -#+caption: Login -#+attr_html: :alt The Lounge login page with username and password fields. -[[https://img.cleberg.net/blog/20241229-thelounge/login.webp]] - -** Nginx Reverse Proxy - -If you want to access the service via a domain name (=thelounge.example.com=), -you can use Nginx as a reverse proxy. - -First, create the Nginx configuration file. - -#+begin_src shell -sudo nano /etc/nginx/conf.d/ -#+end_src - -The configuration below assumes you have a wildcard certificate for HTTPS (:443) -traffic via =example.com=. If you don't, you'll need to obtain an SSL -certificate to use HTTPS. - -#+begin_src configuration -upstream irc_upstream { server 127.0.0.1:9000; } - -# HTTP redirect -server { - listen 80; - listen [::]:80; - server_name thelounge.example.com; - include custom.d/letsencrypt.conf; - - if ($host ~ ^[^.]+\.example\.com) { - return 301 https://$host$request_uri; - } -} - -# HTTPS -server { - listen 443 ssl; - listen [::]:443 ssl; - http2 on; - server_name thelounge.example.com; - - # SSL - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - ssl_trusted_certificate /etc/letsencrypt/live/example.com/chain.pem; - - # reverse proxy - location / { - proxy_pass http://irc_upstream; - client_max_body_size 0; - proxy_set_header X-Request-Base "$scheme://$host/"; - - # Standard reverse proxy settings - proxy_set_header Host $host; - proxy_set_header Upgrade $http_upgrade; - proxy_set_header Connection upgrade; - proxy_set_header Accept-Encoding gzip; - proxy_set_header X-Real-IP $remote_addr; - proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_set_header X-Forwarded-Host $http_host; - proxy_set_header X-Forwarded-Uri $request_uri; - proxy_set_header X-Forwarded-Ssl on; - proxy_redirect http:// $scheme://; - proxy_http_version 1.1; - proxy_set_header Connection ""; - proxy_cache_bypass $cookie_session; - proxy_no_cache $cookie_session; - proxy_buffers 64 256k; - } -} -#+end_src - -Finally, restart Nginx to see the effects. - -#+begin_src shell -sudo systemctl restart nginx.service -#+end_src - -** Initial Setup - -The first thing you'll need to do is create a user. You can do this with the -docker container with the following command, which will ask for a password. - -#+begin_src shell -sudo docker exec --user node -it thelounge thelounge add [username] -#+end_src - -Once the user has been created, you'll be able to log in to the web interface. -Once created, you can change your password in the settings panel of the web -interface. - -Finally, you can connect to an IRC server with the plus (=+=) button at the -bottom of the sidebar and connect to individual channels or users via the plus -(=+=) button next to your server's name in the sidebar. - -#+caption: New Server Connection -#+attr_html: :alt Settings for network, proxy, preferences, and authentication. -[[https://img.cleberg.net/blog/20241229-thelounge/new_connection.webp]] - -#+caption: Existing Server Connection -#+attr_html: :alt Libera.Chat server connection log and status. -[[https://img.cleberg.net/blog/20241229-thelounge/existing_connection.webp]] - -#+caption: Channel View -#+attr_html: :alt View of the #emacs channel on Libera.Chat. -[[https://img.cleberg.net/blog/20241229-thelounge/channel.webp]] -#+date: <2025-01-23 Thursday 20:44:45> -#+title: Self-Hosting Guide: Tandoor Recipe Manager -#+description: Detailed tutorial on deploying Tandoor, an open-source recipe management application, including installation steps and configuration for self-hosted operation. -#+slug: self-hosting-tandoor - -* Overview - -[[https://tandoor.dev/][Tandoor]] is a smart recipe manager web application that allows you to: -- Store your recipes -- Search for recipes and ingredients -- Share recipes with a link and permission system -- Put recipes and ingredients into a shopping list -- Plan your meals with a built-in calendar -- Calculate nutritional values -- Import recipes from websites and apps -- Load existing recipes - -* Installation - -[[https://docs.tandoor.dev/][The Tandoor docs]] contain all of the relevant information needed to get start -with the self-hosting process. - -This tutorial will use Docker Compose and Nginx on Ubuntu 24.04.1. - -** Docker Compose - -On your machine, create a directory for Tandoor and copy down the =.env= and -=docker-compose.yml= templates: - -#+begin_src shell -mkdir ~/tandoor cd ~/tandoor wget -https://raw.githubusercontent.com/vabene1111/recipes/develop/.env.template -O .env wget -# Plain version of docker-compose.yml -https://raw.githubusercontent.com/vabene1111/recipes/develop/docs/install/docker/plain/docker-compose.yml -#+end_src - -Within these files, customize as needed. -- =.env= - - Add a =SECRET_KEY= - - Define the =ALLOWED_HOSTS= - - Set the =POSTGRES_PASSWORD= -- =docker-compose.yml= - - Update the =ports= since Nginx on my host is already using port 80 (e.g. - =8087:80=) - -Once you've updated and saved the files, you can launch the container. - -#+begin_src shell -sudo docker compose up -d -#+end_src - -The application is now available at =localhost:8087= or =ip_address:8087= if -accessing via a different machine. If accessing via a different machine, -remember to allow port =8087= through any existing firewalls. - -** Nginx Reverse Proxy - -Now that Tandoor is available locally, let's connect it to the Nginx web server -running on the host machine. - -#+begin_quote -Note: I use Nginx configuration files within the =conf.d= directory, but you may -need to use the =sites-available= directory, depending on your installation of -Nginx. -#+end_quote - -#+begin_src shell -cd /etc/nginx/conf.d/ -sudo nano recipes.conf -#+end_src - -Within this file, define your website configuration. The example below is my -default configuration and utilizes a wildcard certificate for =*.example.com= -that covers all of my subdomains. If you don't have a wildcard certificate, you -will need to generate an SSL certificate for your domain. - -#+begin_src config -server { - listen 443 ssl; - listen [::]:443 ssl; - http2 on; - server_name recipes.example.com; - - # SSL - ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; - ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; - ssl_trusted_certificate /etc/letsencrypt/live/example.com/chain.pem; - - # reverse proxy - location / { - proxy_pass http://localhost:8087/; - proxy_set_header Host $http_host; - proxy_set_header X-Forwarded-Proto $scheme; - proxy_redirect http://127.0.0.1:8080 https://recipes.example.com; - } - - location /media/ { - root /media/; - index index.html index.htm; - } -} - -# HTTP redirect -server { - listen 80; - listen [::]:80; - server_name recipes.example.com; - include custom.d/letsencrypt.conf; - - if ($host ~ ^[^.]+\.example\.com$) { - return 301 https://$host$request_uri; - } -} -#+end_src - -Save and close the configuration file and then restart the web server. - -#+begin_src shell -sudo systemctl restart nginx.service -#+end_src - -The app is now available on your custom domain! - -** Screenshots - -#+caption: Login -#+attr_html: :alt Tandoor login page. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/login.webp]] - -#+caption: Recipes -#+attr_html: :alt Tandoor options to search for recipes. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/recipes.webp]] - -#+caption: Meal Plan -#+attr_html: :alt Calendar view to define meal plans. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/mealplan.webp]] - -#+caption: Shopping Lists -#+attr_html: :alt Page to create or search for shopping lists. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/shopping.webp]] - -#+caption: Cook Book -#+attr_html: :alt Page to create a visual-style cookbook. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/cookbook.webp]] - -#+caption: Import -#+attr_html: :alt Options to import recipes from other pages and auto-populate images, keywords, steps, and a description. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/import.webp]] - -#+caption: Administration Panel -#+attr_html: :alt Django administration options for the web app. -[[https://img.cleberg.net/blog/20250123-self-hosting-tandoor/admin.webp]] -#+date: <2025-02-11 Tuesday 11:40:00> -#+title: Obscura VPN: A Two-Party Protocol Review -#+description: Analytical review outlining the features, implementation, and security aspects of Obscura VPN's two-party protocol in conjunction with Mullvad VPN. -#+slug: obscura-vpn - -#+begin_quote -This review is written at a high-level for users, not a technical deep-dive of -VPN technologies. -#+end_quote - -* What is Obscura? - -[[https://obscura.net/][Obscura]] is a new VPN offering that's [[https://mullvad.net/en/blog/mullvad-partnered-with-obscura-vpn][partnered with Mullvad]] to provide a unique -service: a VPN that "can't log your activity" due to the fact that it uses -Obscura servers for initial traffic routing and then passes off the traffic to -Mullvad's WireGuard servers as exit nodes. - -This two-party VPN protocol allows you to use Obscura to relay your traffic, but -they don't see your traffic. On the other hand, the exit nodes from Mullvad will -see where you're connecting but cannot tell who you are as your traffic will -come directly from Obscura servers with other users. - -* Privacy Features - -One of the things I look for when considering a VPN are privacy features -intended to benefit users. Here are the features I love about Obscura: - -- Two-party VPN protocol with Mullvad's servers -- No email required for sign-up -- No credit card required, crypto options available -- Open source [[https://github.com/Sovereign-Engineering/obscuravpn-client][repository]] is available -- [[http://ngmmbxlzfpptluh4tbdt57prk3zxmq4ztew7l2whmg7hkqaof2nzf7id.onion/][Tor website available]] -- Transparent display of the exit server's public key (see the Location page in - the app) so you can verify with Mullvad that you're connect via a genuine - Mullvad exit node using [[https://mullvad.net/en/servers][Mullvad's server listing]] - -* Initial Impressions - -** Available Platforms - -I am testing out Obscura on macOS, as that is the only available platform. This -is the biggest downside, as I would not want to support different VPNs on -different devices - if I'm using Obscura, I want to use it on all of my -platforms (macOS, iOS, and Ubuntu). - -However, the macOS app is incredibly easy to install via the =.dmg= file -available on Obscura's website. Upon first launch, you're presented with a login -option and can create an account now, if you have not done so already. - -** Payment - -Once created, the app will ask you to pay if you do not have a subscription. As -far as I can tell, there is no free tier available. In my opinion, this is a -good thing as I hesitate to understand how privacy-focused apps make money when -they offer free services to users. - -#+caption: Payment -#+attr_html: :alt Options to fund your Obscura account with credit card or lightning. -[[https://img.cleberg.net/blog/20250211-obscura-vpn/payment.webp]] - -** Connection - -Once you've enrolled in either a subscription or one-time payment, Obscura will -return you to the app and allow you to connect. You can choose a specific server -location or automatically connect. - -#+caption: Initial Connection -#+attr_html: :alt Obscura macOS app on the Connection screen. -[[https://img.cleberg.net/blog/20250211-obscura-vpn/connect.webp]] - -#+caption: Toolbar Utility -#+attr_html: :alt The Obscura VPN menu bar app on macOS shows connection status, bandwidth status, and options to debug or quit. -[[https://img.cleberg.net/blog/20250211-obscura-vpn/toolbar.webp]] - -** Speed - -The connection feels naturally smooth and I haven't experienced any disruptions -or lag in my (very short) time testing out the application. To confirm, I -checked a speed test while connected to a server location in my country. - -Speed test results: - -- 85.49 Mbps (Down) -- 217.75 Mbps (Up) -- 25 ms (Ping) - -** Mullvad Verification - -Lastly, I checked with Mullvad's verification tool (=mullvad.net/en/check=) to -verify Obscura's claims that Obscura sends your traffic through Mullvad's exit -nodes before connecting to your target. - -From the image below, we can see that Mullvad confirmed my traffic to be -connected through a Mullvad IP address. - -#+caption: Mullvad Check -#+attr_html: :alt The Mullvad connection check web page shows all "green" when on Obscura. -[[https://img.cleberg.net/blog/20250211-obscura-vpn/mullvad-check.webp]] - -* Final Thoughts - -Overall, I have found the app to be fast and user friendly. The privacy features -are certainly compelling, but the platform has a ways to go before it can -displace something like Mullvad in the privacy-focused portion of the VPN -market. - -I wish Obscura offered the following features: - -- Available on more platforms -- Specifics on how many devices will be allowed per account -- More server locations, especially in countries with stronger data privacy laws -- Options to pay with other crypto beside Bitcoin, such as Monero -- Whitepapers or videos that walk through the technical details and show how - traffic can be verified to be encrypted and connecting through the various - expected nodes -- Verifiable builds - -However, Obscura is a nice tool for now and I hope to see more information from -the technical side to help more users gain comfort around the security and -privacy of the tool. - -Used Obscura? Send me an email and let me know your thoughts! -#+date: <2025-02-25 Mon 19:20:05> -#+title: How I Transferred 5000+ Emails from Proton Mail to Migadu -#+description: Detailed instructions describing the process and considerations involved in transferring email data securely from Proton Mail to Migadu email hosting. -#+slug: email-migration - -* The Setup - -I recently migrated my emails from Proton Mail to Migadu after a failed attempt -to get myself into the Proton ecosystem and wanted to detail my process, as it -was far more painful than expected. - -To give some context: I had nearly 5000 messages stored, accounting for around -2.5 GB of space. - -Overall, this process would have taken all day had I done it in one sitting, but -I decided to break it up and it lasted a couple days before I was able to say that -all my messages were stored in my new account. - -* Exporting Messages - -To start, I needed to export my messages from Proton Mail. As I am using macOS, -I was able to use the [[https://proton.me/support/proton-mail-export-tool][Proton Mail Export Tool]]. However, the downside is that -this dumps every single email on your account into a single folder in the =.eml= -format. They also export a JSON file for each message, in the case you're -importing back into Proton Mail. - -This means that anything in my Inbox, Sent, Archive, Trash, and user-created -folders were all dumped out into a single folder with incomprehensible names. - -Without a clear path to easily figure out how to re-organize my emails into a -new account, I was left a bit annoyed at Proton's export process. - -* Importing Messages - -Left with a pile of messages and no way to discern what they were without -opening each one, I decided to try and use Thunderbird to import messages into -my new Migadu IMAP account. - -This led to a dead end as my two methods failed: - -1. [[https://addons.thunderbird.net/en-US/thunderbird/addon/importexporttools-ng/][ImportExportTools NG]] does not work with my version of Thunderbird (135). -2. Manually dragging the =.eml= files onto a folder in Thunderbird worked for - small batches of files, but seemed to lock up if I tried to import more than - a few hundred at a time. It also seemed a bit buggy, as I ended up with many - duplicate, and sometimes triplicate, messages. - -At this point, I decided to take a step back and use [[https://github.com/djcb/mu][mu]], a command-line utility -that would index my files and sync back and forth with Migadu for me. - -Using my blog post, [[https://cleberg.net/blog/mu4e.html][Email in Doom Emacs with Mu4e on macOS]], (and skipping the -mu4e parts) I was able to set up a minimal directory connected to my Migadu IMAP -account. Using my terminal, I simply moved all of my messages into the =mu= -directory and synchronized the account, and voila, my messages synchronized -successfully to the remote server and my other email clients. - -However, the remaining issue was that I now had all 5000 messages in the Archive -folder and needed to figure out how to organize them back into their proper -directories. - -* Organizing Messages Into Folders - -As with any problem, I used Python as my hammer to fix the problem. I started by -creating the directories required in Thunderbird, fetching them with =mbsync= so -that they appeared in my =mu= directory, and using Python to organize my -messages into the newly-created sub-folders. - -** Sent Messages - -I started by organizing my Sent messages. This required checking each file for -the =From= header and moving them to the Sent folder. - -#+begin_src shell -cd ~/.maildir/migadu/Archive/cur -nano _sent.py -#+end_src - -#+begin_src python -# _sent.py -import os -import glob -import shutil - -# Loop through all files in the current folder -for file in glob.glob("*.eml"): - # Create boolean to check if we should move the file - move = False - - # Open the current file - f = open(file, 'r') - - # For each line in file, find the From header - for line in f: - if line.startswith("From:"): - # If we find ourself, mark the message for move - if "[email protected]" in line: - move = True - - # Close the file - f.close() - - # Move the file, if marked for move - if move == True: - filepath = os.path.join("/Users/YOUR_USERNAME/.maildir/migadu/Archive/cur/", file) - new_filepath = os.path.join("/Users/YOUR_USERNAME/.maildir/migadu/Sent/cur/", file) - shutil.move(filepath, new_filepath) -#+end_src - -#+begin_src python -python3 _sent.py -#+end_src - -The only downside to my current approach is that it was the quick and dirty -option, so I re-ran it while editing the [email protected]= string for each -email I wanted to move. If I had wanted to create a more well-defined solution, -I would have created an array of addresses to check for and have the =if= -statement check against that array. - -Regardless, I was able to run this with the addresses I wanted to move to the -Sent folder and was soon finished. - -** Archive Sub-Folders - -Next, I needed to move the remaining ~3000 messages from the Archive folder into -dated sub-folders, organized as such: - -- Archive/2016 -- ... -- Archive/2025 - - -To do this, I followed a similar approach as the method above but check for the -=Date= header instead of the =From= header. - -#+begin_src shell -cd ~/.maildir/migadu/Archive/cur -nano _archive.py -#+end_src - -This approach requires finding the =X-Pm-Date= header and splitting it by the -spaces contained within. Once split into a list, we must select the fourth -element, as that contains the year which will match the directory we should move -it to. - -For example, the header =X-Pm-Date: Fri, 07 Feb 2025 16:12:08 +0000= will be -split into a list as such: - -#+begin_src python -[ - 'X-Pm-Date:', # 0 - 'Fri,', # 1 - '07', # 2 - 'Feb', # 3 - '2025', # 4 - '16:12:08', # 5 - '+0000' # 6 -] -#+end_src - -From this list, we select the fourth element (=2025=) and use that to build the -destination path. - -#+begin_src python -# _archive.py -import os -import glob -import shutil - -# Loop through all files in the sub-folders under Archive -for file in glob.glob("*.eml"): - # Create boolean to check if we should move the file - move = False - - # Open the current file - f = open(file, 'r') - - # For each line in file, find the X-Pm-Date header - for line in f: - if line.startswith("X-Pm-Date"): - # Split the line into a list by spaces; - # Then select the item that contains the year - year = line.split(" ")[4] - move = True - - # Close the file - f.close() - - # Move the file, if marked for move - if move == True: - filepath = os.path.join("/Users/YOUR_USERNAME/.maildir/migadu/Archive/cur/", file) - new_filepath = os.path.join(f"/Users/YOUR_USERNAME/.maildir/migadu/Archive/{year}/cur/", file) - shutil.move(filepath, new_filepath) -#+end_src - -#+begin_src python -python3 _archive.py -#+end_src - -At this point, we've now moved all Sent messages to the Sent box and organized -all messages under the Archive folder into their correct sub-folders. - -If you exported other files, such as files from your Inbox, Trash, etc., you -could follow a similar approach and determine the best header or attribute to -identify them for further organization. - -** Synchronize the Results - -Before synchronizing the files in their new locations, I needed to remove the -characters at the end of the file name since =mu= appends IDs to the end of file -names. - -#+begin_src shell -cd ~/.maildir/migadu/Archive -nano _sync_prep.py -#+end_src - -This script prepares the =Archive= sub-folders for synchronization, but the same -concept applies to the Sent folder, except you'd replace =*/cur/*= with =*= if -this script were inside the =Sent/cur= directory. - -#+begin_src python -import glob -import shutil - -# Loop through all files in the sub-folders under Archive -for file in glob.glob("*/cur/*"): - # Remove the characters at the end of the file name created by =mu= - new_file = file.split(",U=",1)[0] - - # Move the file to the new file name - shutil.move(file, new_file) -#+end_src - -#+begin_src shell -python3 _sync_prep.py -#+end_src - -Finally, we can synchronize the results. - -#+begin_src shell -mbsync -aV -#+end_src - -* Removing Duplicates - -My only remaining issue at the time of writing is identifying and removing -duplicate messages. I have toyed with simple Python and command-line solutions -to identify duplicate files, but could not get them to effectively define all -the duplicates found in any specific directory. - -I've even tried using the [[https://github.com/pkolaczk/fclones][fclones]] utility, to no avail. It seems that something -in the Proton export, my manual Thunderbird method attempt, or possible sync -issues between Thunderbird -> Migadu <-> mu caused duplicates where content -within the message has been modified. - -Although I now seem to be wasting space and in need of a deduplication tool, I -have all of my messages migrated to my new service. -#+date: <2025-04-05 Saturday 23:04:54> -#+title: Automating GitHub to GitLab Repository Sync -#+description: Technical steps for setting up automated synchronization and mirroring of source code repositories from GitHub to GitLab for redundancy and repository management. -#+slug: git-mirror - -This is a short post detailing how I maintained repositories on GitHub and -mirrors on GitLab - including both public and private repositories. - -Since GitLab locks pull-only mirrors behing their Premium and Ultimate tiers, I -found a different solution. - -* Creating Mirrors - -I'll skip the setup and just hit the bullet points: - -- I have a plethora of GitHub repositories. -- I used GitLab's mass-import functionality to do the initial import of my - repositories from GitHub. -- I made sure all of my GitHub repositories were cloned locally in my =~/git= - directory. - -* Setting up Mirror Connections - -To start, I navigated to the =~/git= directory, which holds all of the -repositories I have on GitHub and created a shell script. - -#+begin_src shell -cd ~/git -nano setup_mirrors.sh -#+end_src - -Within this shell script, I created a loop that will open each repository and -add both the GitHub and GitLab SSH-style clone URIs to the =origin= remote. - -#+begin_src shell -for repo in */ -do - cd $repo - git remote set-url origin --push --add [email protected]:ccleberg/${repo%*/}.git - git remote set-url origin --push --add [email protected]:ccleberg/${repo%*/}.git - git remote -v - cd .. -done -#+end_src - -Once complete, I created another shell script to open each repository, pull any -remote commits, and push local commits to both remotes. - -#+begin_src shell -nano mirror.sh -#+end_src - -#+begin_src shell -for repo in */; -do - cd $repo - git pull --rebase origin HEAD - git push - cd .. -done -#+end_src - -Finally, enable execution of both scripts before moving on. - -#+begin_src shell -chmod +x setup_mirrors.sh -chmod +x mirror.sh -#+end_src - -* Initialize Mirrors - -To use the =setup_mirrors.sh= script above, simply execute it from a terminal. - -#+begin_src shell -./setup_mirrors.sh -#+end_src - -Once complete, each repository /should/ have one fetch URI (GitHub) and two push -URIs (GitHub & GitLab). At this point, any =git pull= or =git fetch= commands -will pull from GitHub and any =git push= commands will send updates to both -GitHub and GitLab. - -* Schedule Periodic Checks - -To utilize the =mirror.sh= script from the previous step, let's use crontab. - -#+begin_src shell -crontab -e -#+end_src - -Within crontab, I used the schedule below to ensure the script is executed -daily. - -#+begin_src text -0 0 * * * /Users/cmc/git/mirror.sh -#+end_src - -This ensures that the =mirror.sh= file is executed daily and will push any local -or GitHub commits to GitLab. - -I have tested this by manually running =mirror.sh= and watching the results. -There are edge cases where I will need to intervene and manually resolve merge -conflicts, but it's largely autonomous, so I'm happy with the results. -#+date: <2025-05-02 Friday 21:10:00> -#+title: Running Asahi Linux on Apple M2 MacBook Pro: My Experience -#+description: Documented analysis of installation procedure, system performance, and software compatibility for running Asahi Linux on the Apple M2 MacBook Pro 16-inch model. -#+slug: asahi-linux - -* Trying out Asahi Linux - -While debating if I should find a replacement laptop and get rid of my MacBook -Pro, I decided to try [[https://asahilinux.org/][Asahi Linux]]. - -To put the bottom line up front, I love the experience and support for popular -features has come a long way since I originally checked out their website a few -years ago. - -From Asahi's website, as seen below, I noticed that almost all targeted features -are now supported. This is a great jump from the state it was at in 2022 - 2023 -when I last checked. - -#+caption: Asahi Linux Device Support -#+attr_html: :alt Device support for Asahi Linux. -[[https://img.cleberg.net/blog/20250502-asahi-linux/device_support.webp]] - -** Installation - -Luckily, the installation process is as simple as getting started with a single -command: - -#+begin_src shell -curl https://alx.sh | sh -#+end_src - -This script will walk you through the standard installation steps to define the -size of the Linux partition, define your user and hostname, and give you -instructions on how to boot from the new operating system (OS). - -Once the script completes, it will ask you to completely shut down the device, -boot into the Startup Options menu, and follow a handful of prompts to enable -your new OS. - -** Initial Thoughts - -By default, the installer suggests using the KDE (as does the online community), -so I opted to try KDE. Historically, I have always been a Gnome user when -utilizing a fully graphical desktop environment (DE), but I'm up for trying -something new. - -KDE on Asahi works wonderfully and supports all of the generic features I'd -expect from a vanilla installation: - -- Snap to tile -- Shell and window themes -- Graphical updates -- Sensible default applications (Dolphin, Firefox, KMail, Konsole, KWrite) -- Support for battery percentages, keyboard backlight control, and miscellaneous - sensor controls -- Fast and reliable bluetooth adoption -- Native game pad support - -Here's a quick look at the default desktop. In subsequent screenshots, you'll -see I started using the WhiteSur theme as it provides a more comfortable layout -for macOS users. - -#+caption: KDE -#+attr_html: :alt A screenshot of a terminal running fastfetch and emacs on Asahi Linux. -[[https://img.cleberg.net/blog/20250502-asahi-linux/kde.webp]] - -When diving into the system information panel, we can see that this machine is -running Fedora Linux Asahi Remix 42 on an Apple M2 Pro laptop with 16GB of RAM. - -#+caption: System Information -#+attr_html: :alt System information shows Fedora Linux Asahi Remix 42 with KDE 6.3.4. -[[https://img.cleberg.net/blog/20250502-asahi-linux/sysinfo.webp]] - -As I noted above, the first thing I did after installing Asahi and taking a few -screenshots was to install and change themes. - -I prefer the WhiteSur theme, as I used this theme previously on Linux before I -switched to macOS. However, I also like themes that incorporate the gruvbox -color palette, as well as the Nothing theme that uses a dark black and red color -palette. - -#+caption: Themes -#+attr_html: :alt Themes available by default on Asahi. -[[https://img.cleberg.net/blog/20250502-asahi-linux/themes.webp]] - -One of the things I use my laptop for the most is consuming media (music, -television shows, movies, etc.), so I had to make sure that my bluetooth devices -would connect properly. - -As you can see in the screenshot below, my AirPods Pro 2 connect seamlessly and -are available for use. By going through the normal button-holding process, I was -able to pair my AirPods in about 10 seconds. - -However, I have noticed that Asahi doesn't support some of the advanced AirPod -capabilities like pausing media when you remove an AirPod from your ear. The -lack of these advanced features doesn't bother me, but some people may be. - -#+caption: Bluetooth -#+attr_html: :alt Bluetooth settings showing AirPods Pro support. -[[https://img.cleberg.net/blog/20250502-asahi-linux/bluetooth.webp]] - -Next, I was able to connect my PS5 controller via USB-C and Asahi picked up the -connect instantly in the settings menu. You can move the sticks and press all of -the buttons to see if they're recognized within this settings menu. - -#+caption: Game Pad Settings -#+attr_html: :alt Gamepad settings showing PS5 input and button configurations. -[[https://img.cleberg.net/blog/20250502-asahi-linux/gamepad_settings.webp]] - -I had a bit of an issue launching Steam the first time, as I was getting an AVC -Denial error from SELinux. To fix this, I had to manually allow the Steam -application access to the requested resources: - -#+begin_src shell -sudo ausearch -c 'passt' --raw | sudo audit2allow -M my-passt -sudo semodule -X 300 -i my-passt.pp -#+end_src - -While my MacBook only has 16GB of RAM, which seems to be the bare minimum -required for the virtualization overhead, I was able to test one or two games -before they crashed due to RAM errors. - -However, I did confirm that my PS5 controller worked natively with these games -on Steam! I don't think I will be gaming much on this laptop anyway, but it -seems you should have at least the 32GB models if you want to game on Asahi. - -** Software Support - -One thing to keep in mind is that Apple silicon chips (M*) are based on the ARM -architecture, which means you will need to install software that supports ARM -(i.e., ARM64/aarch64). - -While I have run into a handful of applications that do not have an ARM package -available, it is not as difficult as it used to be to find suitable apps for all -purposes on ARM. - -*** Signal Desktop - -One specific application that has been causing issues is [[https://signal.org/][Signal]]. The download -page on their website will prompt you to install their Debian-based package, -which does not work on RPM-based systems (or any other distribution except -Debian & downstreams, such as Ubuntu). - -There are a few different websites offering potential solutions, but I settled -on the [[https://github.com/kenballus/asahi-signal-desktop/][asahi-signal-desktop]] repository for now. - -#+begin_quote -One thing to note is that this script does not work with all versions of Signal. -I tested out 7.53.0 and found that the installer did not work at all. - -I had to use 7.44.0, as noted in the project's README, for the script to work. -#+end_quote - -The installation process is simple. You can simply clone the repository and run -the script: - -#+begin_src shell -git clone https://github.com/kenballus/asahi-signal-desktop/ -cd asahi-linux-desktop -./install_signal.sh 7.44.0 -#+end_src - -At this point, Signal should work. However, I have run into constant crashing -issues, so it's not a great solution. - -[[https://github.com/AsamK/signal-cli][signal-cli]] may work, but I have not tested this yet on Asahi. Before I used -macOS, I used [[https://github.com/isamert/scli][scli]], which provides a TUI for the signal-cli utility and it -worked wonderfully. - -* Final Thoughts - -I am still in the early days of testing out Asahi Linux, so I will be sure to -come back and update this post occasionally, but I am very happy with the user -experience so far. Everything is smooth and I am still able to experience the -great hardware of the Macbook with the software of Linux. - -In addition to the screenshots above, I have been testing out [[https://swaywm.org/][SwayWM]], which is -slightly more difficult to configure after being away for Linux for a couple -years. Regardless, it's working on Asahi as well and seems to be suitable for -daily driving. - -Overall, I am glad there's continued support for Asahi and will be supporting -them through their Open Collective going forward. Cheers to the Asahi team on -such a great product. -#+date: <2025-05-30 Friday 10:53:28> -#+title: Mastering Emerging Tech for IT Audit Career Growth -#+description: Instructional content detailing actionable knowledge areas including artificial intelligence, blockchain, cloud computing, DevOps, and automation relevant for audit professionals. -#+slug: it-audit-career - -* Introduction - -As trends have shown, the auditing and assurance world is increasingly becoming -overwhelmed with topics like [[https://kpmg.com/xx/en/what-we-do/services/ai/trusted-ai-framework.html][AI]], [[https://pcaobus.org/Documents/Audits-Involving-Cryptoassets-Spotlight.pdf][Digital Assets]], [[https://kpmg.com/us/en/articles/2023/building-trust-cloud-environments.html][Cloud]], [[https://kpmg.com/us/en/articles/2023/role-of-internal-audit-devops.html][DevOps]], and [[https://kpmg.com/ch/en/insights/technology/audit-transformation.html][Automation]]. - -While these trends are rapidly transforming businesses and industries, audit -firms and departments are working hard to ensure they stay aligned with business -objectives. - -Throughout my career, I've seen topics like "AI" evolve from LLM-based projects -used by data scientists to everyday tools accessible to the masses and integrated -directly into business operations. - -As an auditor, skills in emerging technologies are an invaluable asset that can -translate into massive career opportunities and long-term job security. - -I have experienced this firsthand as topics like automation, AI, cloud -assurance, and DevOps have kept me in a secure position with significant potential -for growth and learning. - -In this post, I'm going to walk through the process of becoming skilled in an -emerging technology and how to translate that into a rewarding audit career. - -* Step 1: Build a Strong Foundation in Audit & Risk - -To start, I want to note that learning about emerging technologies is only -useful if you already have a base in auditing. You can't audit a cloud -environment with cloud knowledge alone — you also need to understand the -fundamentals of auditing. - -If you find that you're highly technical already, focus your time on learning -audit standards and guidance. - -You can customize this to any frameworks applicable to your company or industry, -but these are generally the baseline for an audit career: - -- [[https://www.coso.org/Pages/default.aspx][COSO]] -- [[https://www.nist.gov/cyberframework][NIST CSF]] -- [[https://www.iso.org/isoiec-27001-information-security.html][ISO/IEC 27001]] -- [[https://pcaobus.org/][PCAOB]] -- [[https://www.aicpa-cima.com/resources/assurance][AICPA]] - -The consistent theme throughout these frameworks is that audits rely on -independent parties who provide consistent documentation, appropriate -considerations of risks and responses, scoping, and reporting. - -One of the easiest ways to get this knowledge is by doing. While it can be -challenging, the concept is straightforward. If you are working in a role within -a department like internal audit, external audit, risk, compliance, etc., focus -on performing your role exceptionally and continuously challenge yourself to -learn more about audit and risk each day you work. - -* Step 2: Learn the Tech That's Changing the Profession - -Getting to the point of this post, there's a wide range of technologies transforming the audit -world. To accelerate career growth and discover a niche you enjoy, I've compiled -a short list of topics that are currently (1) growing in demand, (2) have a need -for more experts within the audit field, and (3) are expected to remain relevant. - -- *Automation & Data Analytics*: Alteryx, Python, Power BI, Tableau -- *Cloud*: AWS, Azure, GCP, IBM -- *Blockchain*: Decentralization, smart contracts, chain of custody -- *DevOps*: Azure DevOps, CI/CD, DevSecOps, GitHub, GitLab, Jenkins -- *AI/ML*: AI in business, AI in auditing, AI assurance - -#+BEGIN_QUOTE -*Pro Tip*: Tackle one area at a time. You don't need to become an expert, but -make sure you learn enough to conceptualize the technologies and logic behind -the topics you're auditing. - -If you focus on one at a time, you can dedicate time to that sole topic to -understand it more deeply before moving on to the next. -#+END_QUOTE - -* Step 3: Earn Certifications That Signal Credibility - -If you don't have much experience, or can't demonstrate your knowledge in a -particular area due to job constraints or otherwise, you can utilize courses -and certifications to boost your credibility. This is an effective way to -establish credibility and demonstrate your qualifications. - -- [[https://www.isaca.org/credentialing/cisa][CISA (Certified Information Systems Auditor)]]: Core certification for IT - auditors covering systems, controls, governance, and assurance. -- [[https://learn.microsoft.com/en-us/certifications/azure-fundamentals/][Microsoft Azure Fundamentals (AZ-900)]] / [[https://aws.amazon.com/certification/certified-cloud-practitioner/][AWS Certified Cloud Practitioner]]: Entry-level - cloud certifications covering core cloud concepts, services, pricing, and - security. -- [[https://www.alteryx.com/certification/designer-core][Alteryx Designer Core Certification]]: Validates your ability to build data - prep, blending, and analytics workflows in Alteryx. -- [[https://www.coursera.org/professional-certificates/ibm-data-science][IBM Data Science Professional Certificate]] (via Coursera): Teaches data - science fundamentals, Python, SQL, and AI basics; popular for aspiring data - auditors and analysts. -- Entry-level technical certifications: - - [[https://pythoninstitute.org/pcep][PCEP (Certified Entry-Level Python Programmer) by Python Institute]] - - [[https://www.edx.org/learn/artificial-intelligence][AI certifications on edX]] covering foundations, governance, and AI ethics. - - [[https://www.blockchain-council.org/certifications/certified-blockchain-professional-expert/][Certified Blockchain Expert]] - -I have earned the following certifications and have seen great responses -throughout my career due to the credibility they provided in these focus areas: - -- GitLab Certified Git Associate -- GitHub Foundations -- Alteryx Designer Core Certified -- Microsoft Certified: Azure Fundamentals -- Certified Information Systems Auditor (CISA) -- Certified Entry-Level Python Programmer (PCEP) -- Data Science Professional Certificate -- Cybersecurity Audit Certificate - -* Step 4: Join Emerging Tech Projects and Pilots - -Once you have the knowledge and, if applicable, the credentials to showcase your -skills, you need the chance to network and show what you can do. - -To do this, I recommend joining a group focused on the topic you're passionate -about. Normally, this is easiest within your own company. However, sometimes you -may need to seek other opportunities in your community or online to find the -project that works best for you. - -- Seek opportunities internally: AI pilots, automation and data analysis - projects, blockchain initiatives. -- If they don't exist — propose them. -- Suggest automating risk assessments, piloting AI tools, or testing continuous - assurance routines. - -*Why this matters*: These projects become resume differentiators and position -you for leadership roles. - -* Step 5: Build a Network of Tech-Savvy Auditors & Consultants - -As a segue from Step 4, ensure that you have a network of like-minded -individuals who can challenge you and expose you to new ideas. This helps keep -you sharp and open to innovation. Some suggestions include: - -- Join ISACA, local AI/ML meetups, blockchain working groups. -- Engage with emerging tech communities on LinkedIn — share posts, comment on - thought leadership, or publish insights. - -* Step 6: Stay Curious and Keep Learning - -Last, but not least, keep learning! While you may feel like you know everything, -there's always more to explore. I enjoy revisiting known problems from different -perspectives, as it's helped me grow and realize that alternative approaches -often yield better results with experience. - -- The landscape is changing rapidly — stay current on AI regulation, blockchain - security, cloud assurance frameworks, or whatever interests you. -- Subscribe to niche newsletters (e.g., The Cybersecurity 202, AI Ethics - Weekly). -- Take one course or certification per year to stay sharp. - -* Closing - -You don't need to be an engineer or software developer to thrive in technology — -but you do need to understand enough to assess risk. With these steps, I have -found a wonderful and fulfilling career, and I know you can too. - -If you have any questions on how to break into tech risk and audit, feel free to -reach out over email or anywhere else — I would love to connect and chat! -#+date: <2025-06-03 Tue 11:38:40> -#+title: Privacy-First iOS Apps for Minimalists -#+description: Curated listing of iOS applications prioritized for privacy preservation and data security, targeted at users requiring minimal data exposure. -#+slug: private-ios-apps - -The world is evolving into a privacy nightmare, where our own devices are being -used by numerous parties to constantly track and report on our activities. This -is especially prevalent on iOS, where platform restrictions leave users without -many options to lock down their data. - -However, there are apps that exist that can help enhance the privacy of an iOS -device. The post below details a number of privacy resources, directories, and -tools for iOS. - -**Resource Table** - -| Name | Type | -|----------------------------------------+-----------------------------| -| [[https://github.com/pluja/awesome-privacy][Awesome Privacy]] | App Lists & Directories | -| [[https://www.privacyguides.org/en/os/ios-overview/][PrivacyGuides.org]] | App Lists & Directories | -| [[https://cyberinsider.com/][CyberInsider]] | Guides & Educational | -| [[https://ssd.eff.org/module-categories/further-learning][EFF Surveillance Self-Defense]] | Guides & Educational | -| [[https://osintframework.com/][OSINT Framework]] | Guides & Educational | -| [[https://securityplanner.consumerreports.org/][Security Planner (Consumer Reports)]] | Guides & Educational | -| [[https://discuss.privacyguides.net/][PrivacyGuides Forum]] | Community & Discussion | -| [[https://www.reddit.com/r/privacy/][r/Privacy]] | Community & Discussion | -| [[https://www.reddit.com/r/iosprivacy/][r/iOSPrivacy]] | Community & Discussion | -| [[https://tosdr.org/en/][Terms of Service; Didn't Read (ToS;DR)]] | Policy & Transparency Tools | -| [[https://browserleaks.com][BrowserLeaks.com]] | Privacy Testing & Tools | -| [[https://mullvad.net/check][Mullvad Privacy Check]] | Privacy Testing & Tools | -| [[https://support.apple.com/en-us/HT212025][iOS App Privacy Report (Settings)]] | Privacy Testing & Tools | -| [[https://privacytests.org/][PrivacyTests.org]] | Privacy Testing & Tools | - -#+begin_quote -*Note*: This list focuses solely on iOS-compatible resources and tools. No -Android comparisons here as I have not used Android in many years. -#+end_quote - -* Email - -First, I like to consider email as my first app on a new device. However, iOS is -\extremely\ lacking in this area. Certain options are private, such as Proton -Mail and Tuta, but they have certain restrictions and ecosystem lock-in methods -that I try to avoid. - -Canary Mail was a decent option for a while, although a bit mysterious, but they -have recently leaned into the AI hype pretty heavily, which is concerning. -However, it's still one of the only options for PGP emails on iOS. - -- [[https://proton.me/mail][Proton Mail]] - One of the more popular private email options available on iOS. - Allows custom domains, but does not allow for IMAP/SMTP usage, so you're - locked into using their apps. Open source. -- [[https://tuta.com/][Tuta]] - Tuta also locks you into their clients and they do not allow you to use - custom domains. Open source. -- [[https://canarymail.io/][Canary Mail]] - Closed source, so you can't verify anything about what they are - building into the app. However, it's one of the only options for PGP mail on - iOS. Advanced features are locked behind a paywall. - -Another suggestion is to use a browser-based web client. You can install browser -mail clients as progressive web apps (PWAs). For example, I have been using -[[https://webmail.migadu.com][webmail.migadu.com]] as a progressive email app for a while now and it works great -for my purposes. - -This allows for access to your email without installing an application that -access native APIs or other potential data sources you may be concerned about. -This is especially important if you're concerned about allowing permissions to -device APIs, non-reproducible buils from the App Store, or mobile device -fingerprints. - -Lastly, [[https://blog.thunderbird.net/2025/05/thunderbird-for-mobile-april-2025-progress-report/][Thunderbird iOS]] is under development. Keep an eye out for an alpha or -beta release later in 2025 or early 2026. I have a feeling that once Thunderbird -iOS is available, it will easily become the best option for email on iOS. - -#+begin_quote -*I use*: Web-based email on iOS and Thunderbird on my desktop. Once Thunderbird -releases for iOS, I will probably use that. -#+end_quote - -* Browsers - -Your choise of browser is very important if you're concerned with privacy. Any -and all links you click will be opened in your default browser, so you need to -make sure you choose the right browser and configure it properly. Trackers, ads, -fingerprints, and data leaks are constant threats that should be avoided when -possible. - -- [[https://apps.apple.com/us/app/firefox-focus-privacy-browser/id1055677337][Firefox Focus]] - In my opinion, the best option for privacy on iOS. - Automatically blocks trackers, erases data and history upon app close, and - focused on private usage. However, it won't support your bookmarks or keep you - logged into sites long-term. -- [[https://duckduckgo.com/app][DuckDuckGo]] - Another good option, built on chromium. Like Focus, it allows you - to clear all data with a button tap. -- [[https://onionbrowser.com/][Onion Browser]] & [[https://orbot.app/][Orbot]] - Tor - what can I say? It's been the most popular - privacy browser for ages for a reason and now it's available on iOS. Onion - Browser is a Tor browser and Orbot can proxy any number of iOS apps through - Tor. As with all Tor traffic, it will be slower than "regular" traffic. -- [[https://brave.com/][Brave]] - Another chromium-based privacy browser. Can sync with other Brave - browsers via a secure linking process (no account). Fully-featured and great - privacy defaults. There have been some concerns in the past about the company - behind Brave, but I still think it's a decent option for most peoplel. -- [[https://www.apple.com/safari/][Safari]] (with caveats) - Great option if the browsers above don't work for you. - Be sure to read PrivacyGuide's [[https://www.privacyguides.org/en/mobile-browsers/#safari-ios][Safari]] section for more information on what you - need to do to lock it down before relying on it full time. - -#+begin_quote -*I use*: Hardened safari in private mode for every day use, and Onion Browser -for anonymous browsing. -#+end_quote - -* Messaging - -Next up are messaging apps. If you have an iPhone, it's a good bet that you will -be messaging other people on it. The threats for messaging apps tend to be -metadata/data collection from cellular providers, ISPs, and Apple itself. If you -want to protect the privacy of your messages, who your messaging, and the -metadata around those messages (time, method, location, etc.), you'll need to -think about which apps you're using. - -- [[https://signal.org/][Signal]] - My personal favorite and still the gold standard for secure and - private messaging. Open source, end-to-end encrypted, and runs its own private - push notification infrastructure so Apple can't read your message content. A - phone number is required to sign up, but you can create a username immediately - after signing up and share that with others instead of sharing your phone - number. -- [[https://simplex.chat/][SimpleX]] - A decentralized, phone-number-free messaging system. Uses anonymous - message relays and asymmetric keys. -- [[https://getsession.org/][Session]] - A fork of Signal's protocol that eliminates phone numbers entirely. - Routes messages through a decentralized onion network (like Tor). -- [[https://element.io/][Element]] - Based on the Matrix protocol, offering decentralized, federated - chat. Great for groups and communities, with optional end-to-end encryption. - Other client options are available for Matrix on iOS, as well. - -#+begin_quote -*I use*: Signal for private chats with known people, and Matrix for group chats. -#+end_quote - -* VPNs & Networking - -Network traffic is where most surveillance happens. Even with encrypted -messaging and browsers, your IP address and DNS queries reveal a lot about you. -A good VPN or alternative network routing tool masks this, but not all VPNs are -trustworthy. Avoid “free” services or those lacking transparency. - -- [[https://mullvad.net/][Mullvad]] - A no-logs VPN that doesn't require an email or personal info to - create an account. Consistently audited and privacy-focused. Their app is - excellent on iOS. -- [[https://www.torproject.org/][Tor]] - Best for anonymity rather than everyday VPN use. Routes your traffic - over three relays, obscuring both source and destination. Slower, but - unmatched for high-risk browsing. -- [[https://yggdrasilnetwork.org/installation][Yggdrasil]] - An experimental, encrypted, peer-to-peer mesh network. Less - polished for mobile but useful for hobbyists or building private networks - between devices. - -If you can't self-host or build your own mesh, Mullvad is hands-down the easiest -option here. There are other VPN options available, but I haven't tested them -all so I will simply put my vote for Mullvad here and let you research other -options if you don't want to use Mullvad. - -#+begin_quote -*I use*: Mullvad for 24/7 usage, and Tor when anonymity is required. -#+end_quote - -* Password Management - -Weak and reused passwords are still the biggest risks for personal security. A -good password manager makes it possible to use strong, unique credentials -without memorizing them all. - -- [[https://bitwarden.com/][Bitwarden]] - Open source, audited, and free to self-host (e.g., Vaultwarden). - The iOS app integrates with system autofill and Face ID. -- [[https://keepassium.com/][KeePassium]] - A KeePass-compatible client for iOS. Local database storage, - optional cloud sync, and no external accounts. Excellent if you want full - control over your credential store. -- [[https://keepassxc.org/][KeePassXC]] + Syncing Solution - If you already use KeePass on desktop, sync - your database with a secure method like [[https://cryptomator.org/][Cryptomator]]-protected cloud storage, - Syncthing, or local-only transfers. - -Good passwords matter are extremely important, and these apps give you control -over your vault. - -#+begin_quote -*I use*: Bitwarden Families ($40/year) to protect passwords, passkeys, TOTP -codes, and secure notes for my family. If I were using a solution solely for -myself, I would prefer KeePassXC + Syncthing. -#+end_quote - -* Multi-Factor Authentication (MFA) - -MFA is essential, but relying on SMS codes or untrusted proprietary apps defeats -the point. Use open, local, encrypted authenticators where possible. Also, use -passkeys if you can! I prefer passkeys, then TOTP, and then SMS/email, if other -options are not possible. - -- [[https://bitwarden.com/products/authenticator/][Bitwarden Authenticator]] - Integrates with the password manager or works as a - standalone TOTP app. Optional encrypted backups through your Bitwarden - account. -- [[https://ente.io/auth/][Ente Auth]] - Open source, end-to-end encrypted TOTP manager. Syncs encrypted - via Ente's infrastructure. -- [[https://www.tofuauth.com/][Tofu]] - Minimal, offline-first TOTP app. No cloud, no telemetry. -- [[https://raivo-otp.com/][Raivo OTP]] - Open source, native iOS app with secure iCloud backups. Clean - interface. -- [[https://apps.apple.com/us/app/otp-auth/id659877384][OTP Auth]] - A longstanding, trusted TOTP manager with encrypted backups and - Apple Watch support. *Not open source.* - -I recommend pairing one of these with strong passwords and a VPN for everyday -security. - -#+begin_quote -*I use*: Bitwarden Authenticator, previously OTP Auth. -#+end_quote - -* Notes & Personal Data - -If you're storing sensitive personal notes, account details, or journal entries, -opt for encrypted, local-first apps. - -- [[https://beorgapp.com/][Beorg]] - An Org-mode-compatible outliner and task manager for iOS. Great for - Emacs fans and those managing plaintext files. -- [[https://obsidian.md/][Obsidian]] - A local Markdown-based notes app. All data stays on your device - unless you opt for Obsidian Sync (or your own setup). -- [[https://standardnotes.com/][Standard Notes]] - End-to-end encrypted notes, with cross-platform sync. Good if - you want a straightforward, secure cloud service. -- [[https://joplinapp.org/][Joplin]] - Open source, Markdown notes with optional encryption and cloud sync - (Nextcloud, Dropbox, etc). - -These options help decouple your data from major cloud platforms while keeping -notes portable and encrypted. - -#+begin_quote -*I use*: Beorg, since I love org-mode. -#+end_quote - -* Photos & Media - -If you're using iCloud Photos, your camera roll quietly feeds metadata and -images to iCloud by default. If you want to self-host or encrypt your photo -library, here's what works on iOS. At a minimum, I suggest disabling iCloud for -the Photos app, so the data stays local on your device. - -- [[https://immich.app/][Immich (self-hosted)]] - Open source, feature-rich, self-hosted photo manager - with facial recognition and live photo support. Requires a home server. -- [[https://ente.io/][Ente Photos]] - End-to-end encrypted photo storage with iOS and web apps. Paid - plans, but privacy-first infrastructure. - -Good privacy photos apps are rare on iOS — these two are the standout options -right now. - -#+begin_quote -*I use*: Immich for all photos. -#+end_quote - -* Encryption Utilities - -If you're handling sensitive files, you need a proper encryption utility to lock -them down. - -- [[https://cryptomator.org/][Cryptomator]] - Open source, encrypted cloud storage vaults. Integrates with - most cloud providers and works locally. -- [[https://apps.apple.com/us/app/instant-pgp/id1497433694][Instant PGP]] - PGP key generation, import/export, and encrypted message/file - creation. Handy for old-school secure comms. - -If you're serious about privacy, encrypted storage and messaging layers like -these are essential. - -#+begin_quote -*I use*: Cryptomator when syncing sensitive data over Syncthing. I no longer -require Instant PGP since Migadu's webmail client (SnappyMail) supports PGP. -#+end_quote - -* News & Social - -News and social apps leak all kinds of usage metadata, even when you're just -lurking. These tools let you follow content with less exposure. - -- [[https://netnewswire.com/][NetNewsWire]] - Free, open source RSS reader for iOS. -- [[https://www.talklittle.com/three-cheers/][ThreeCheers]] - Privacy-friendly Tildes client for iOS. -- [[https://getvoyager.app/][Voyager]] - Clean, independent Lemmy client. -- [[https://joinmastodon.org/][Mastodon]] - Federated, open source alternative to Twitter. -- [[https://joinpeertube.org/][PeerTube]] - Decentralized video platform, accessible via web or PWA. -- [[https://pixelfed.org/][Pixelfed]] - Federated, open source alternative to Instagram. - -If you're going to be online, at least let it be on your terms. - -#+begin_quote -*I use*: NetNewsWire (via FreshRSS) for RSS feeds, Voyager for Lemmy, and Three - Cheers for Tildes. I have used all of these apps and they are great, but I am - not very active on social sites. -#+end_quote - -* Final Thoughts - -Whether you just want to improve your privacy in small steps or you're -fashioning a tinfoil hat as we speak, moving to privacy-focused services and -apps does two things: - -1. It protects your privacy by ensuring that your data is being protected - through the many methods mentioned above; and -2. It provides money (for paid apps), support (in terms of download count, - reviews, ratings, etc.), and motivation for the developers and companies - behind these apps that provide a privacy haven for users on iOS. - -Every app you use, every service you sign into, quietly collects and trades your -data. iOS makes true anonymity harder than other platforms, but these tools and -services give you a fighting chance to keep your data private. -#+date: <2025-09-05 Fri 10:21:00> -#+title: Crafting a More Human-Centric Design for My Website -#+description: Read this post to understand my latest website redesign and the context for the refresh. -#+slug: human-website-design - -#+begin_quote -/Please note that this redesign is a work-in-progress and is not complete. The -content below describes the beginning of this journey and where I think it may -take me next./ -#+end_quote - -#+caption: The Old Theme -#+attr_html: :alt A screenshot of the old theme for cleberg.net. -https://img.cleberg.net/blog/20250905-human-website-design/before.webp - -#+caption: The New Theme -#+attr_html: :alt A screenshot of the new theme for cleberg.net. -https://img.cleberg.net/blog/20250905-human-website-design/after.webp - -* Inspiration - -I've written numerous times on this blog about minimaliasm, so it shouldn't -surprise any readers here that I've redesigned my website again for even more -minimalism. However, it's a bit different this time as I've historically -designed my website to be very computer design driven (think monospace fonts and -sharp contrasting colors), rather than focusing on designing a website for human -readers. - -I felt inspired recently to minimize my website yet again, but I couldn't figure -out why I wanted to do so for a while. Finally, I think I figured it out. I have -been inspired lately by concepts, such as [[https://en.wikipedia.org/wiki/Wabi-sabi][wabi-sabi]], [[https://en.wikipedia.org/wiki/Shikata_ga_nai][sho ga nai]], [[https://en.wikipedia.org/wiki/Brutalist_architecture][brutalism]], -[[https://en.wikipedia.org/wiki/Minimalism][minimalism]], and related concepts. - -This piece specifically inspired me to cut out elements on my web page that did -not add value. In other places, I simply redesigned how that information was -presented (e.g., creating an "About" page rather than putting that information -on my home screen). - -However, that was not the only motivation for redesigning my website. I have -also recently found an interest in crafting a more human-centric design for my -website. - -In the past, it has largely been a monospace-only, sharp contrast, bold colored -blog. As I grown older, I find myself more interested in naturally-occurring -color palettes and focusing on legible content. - -This blog post will explore the decisions I made and why I chose those -decisions. - -* Function - -The first step in this journey related to the functionality of the site itself. -While my site has not used JavaScript for many years, I have focused on the HTML -itself. - -A common question I challenge myself with is: "Does this element serve a -function? Is it useful? Does it provide more value than distraction?" - -With the most recent redesign, I decided to: - -- Keep the navigation bar to five elements. -- Move the "contact" details from the home page to a dedicated =/about/= page. -- Minimize the footer to remove the build timestamp, donation links, - security.txt links, and webring links. - -This left a focus on navigation, my blog posts, and a short list of links to -relevant pages on my website. - -* Colors - -Previously, I used a very direct color palette for both light and dark modes, as -seen below in the CSS snippet. This used sharp colors and relied heavily on -"pure" colors without tints or shades. - -This allowed for plain blank and white contrasting elements, with basic red and -blue accent colors for inline code and links, respectively. - -#+begin_src css -:root { - --bg: #fff; - --bg-bright: #eee; - --fg: #111; - --link: #00f; - --code: #f00; - --border: #ccc; -} - -@media (prefers-color-scheme: dark) { - :root { - --bg: #121212; - --bg-bright: #1e1e1e; - --fg: #e0e0e0; - --link: #8ab4f8; - --code: #f28b82; - --border: #333; - } -} -#+end_src - -After the update, the focus of the color scheme is focused on a more natual, -paper-like effect. The light mode focuses on a yellow/orange-tinted paper-like -substance, with a dark red accent and straightfoward design. Likewise, the dark -mode scheme uses a charcoal-like color scheme with very simliar accent colors. - -#+begin_src css -:root { - --bg: #EDEDE7; - --bg-bright: #E8D3BE; - --fg: #201E1D; - --link: #810208; - --code: #810208; - --border: #E8D3BE; -} - -@media (prefers-color-scheme: dark) { - :root { - --bg: #201E1D; - --bg-bright: #2F2F2D; - --fg: #EDEDE7; - --link: #D9C2A6; - --code: #D9C2A6; - --border: #2F2F2D; - } -} -#+end_src - -I am still working on the color scheme and don't believe I'm done modifying this -yet. Expect more changes, as always. - -* Space - -While I haven't updated the margins and padding much /yet/, I did make a few -changes that affected the spacing of the site. The intent of this redesign is to -keep the focus of the reader's eyes on the intended content, as well as creating -a comfortable and intentional page layout. - -That being said, let's dive into the changes I've made so far: - -- *Font style*: I've updated the font style from a monospace font stack to a - serif font stack. This created a more natual flow across the screen and less - rigid constraints on the area of the fonts. -- *Font size*: Related to font style, I naturally had to update the font size as - well. This allows for natural reading breaks for the eyes, spacing between - lines, emphasized and larger headers for visual cues, as well as fewer words - being displayed on screen at once. -- *Date format*: I have moved the visible dates on my pages from the ISO - standard (=YYYY-MM-DD=) to a legible, human date format. The new dates - describe the months in full words, as well as the day of the week on post - pages, so that you may read it as you would say it out loud. The underlying - date tagging within the =<date>= element itself still follows the ISO - standard, as that's meant for computers to read. - -With these changes, I'm pleasantly surprised at the quality improvement when -reading the pages on the site. - -* Looking Forward - -As I said at the beginning of the post, I'm not done yet. However, I wanted to -stop and reflect on the changes so far. - -I will continue to think about changes, specifically with the following already -in mind: - -- *Color palettes*: The current scheme is good but not great. I'd love to find a - color palette that feels like reading natural paper. -- *Emphasized text*: Are links legible enough? Is there enought contrast between - quotes, inline code, links, etc.? -- *Spacing*: Font sizes, padding, and potentially reducing content. -- *Layout*: Is there a better structure to this document that would allow for - more comfortable reading? - -With this phase done, I am content and am joyful at the thought of continuing to -refine this website. If not for any readers who may or may not even exist, at -least for myself. -#+date: <2025-09-25 Thu 21:08:00> -#+title: Simplifying the Site: A Minimalist Approach -#+description: This post details a complete redesign of a blog post, stripping away extraneous CSS and HTML elements to prioritize readability and user experience. -#+slug: minimalist-website-redesign - -I know what you're thinking: "ANOTHER blog post about redesigning the website?" - -Yes. Another blog post about redesigning the website. I enjoy it, what can I -say? - -I wrote my latest post about redesigning from a monospace-driven, -terminal-styled theme to a more natural paper-inspired theme. However, it left a -nagging feeling that something was missing. What if I took it further? Was there -really any reason that I had any of that CSS at all? - -#+caption: Old Theme -#+attr_html: :alt A screenshot of the old theme for cleberg.net. -https://img.cleberg.net/blog/20250905-human-website-design/after.webp - -#+caption: New Theme -#+attr_html: :alt A screenshot of the new theme for cleberg.net. -https://img.cleberg.net/blog/20250925-minimalist-website-redesign/minimal.webp - -* Inspiration - -I /briefly/ touched on my inspiration in the last post (hint: wabi-sabi, sho ga -nai, brutalism, minimalism), but I didn't expand on the /why/ for these -concepts. - -So, why? The minimalismtic approach to web design has resonated with me for a -long time. But why minimalism? - -Officially, "the concept of minimalist architecture is to strip everything down -to its essential quality and achieve simplicity." - -This is a blog. It also has pages dedicated to describing who I am and what I -offer. Therefore, the essential quality is the information delivered by the -words and the design on your screen. To effectively communicate this -information, I tried to understand how online information is best read. - -With all of that out of the way, let's get on with it. - -* Core Changes - -Below is a quick audit of the original style sheet and markup, and the elements -I've removed or added. For more in-depth information, refer to the [[https://github.com/ccleberg/cleberg.net/commit/d7978b4ccf4c6c56b1c2888791f73271f91fd12c][git diff]]. - -*HTML* - -- HTML is now minified -- File tags -- Links to site pages are moved from the =index= to the =about= page -- Wiki was removed entirely -- Added a few =<br>= elements to compensate for some of the CSS removals - -*CSS* - -For the CSS, I removed /everything/, except the following rules. - -#+begin_src css -body { - max-width: 50em; - margin: 1.5rem; -} - -nav ul { - list-style-type: none; - display: flex; - padding: 0; -} - -nav ul li { - margin-right: 0.5rem; -} - -img { - border-style: none; - width: 100%; -} - -table { - border: 1px solid #111; - border-collapse: collapse; - width: 100%; -} - -pre, -pre>code, -code { - font-size: 0.9rem; -} - -pre { - border: 1px solid #111; - margin: 0.5rem 0; - padding: 0.5rem; - overflow-x: auto; -} - -time { - display: block; -} - -:not(pre)>code { - color: #f00; -} - -@media (prefers-color-scheme: dark) { - body { - background-color: #222; - color: #eee; - } - - a { - color: #add8e6; - } - - pre { - border-color: #eee; - } -} -#+end_src - -That's it. No framework, no vendor prefixes, no unnecessary selectors. - -This gave me an almost-pure HTML site. It's freeing. It's liberating. It's -comfortable. - -* Reading Experience Benefits - -Recent research shows that line length between 45–75 characters maximizes -reading speed and comprehension. By constraining the container width to ~50 rem -(≈ 100 characters), we stay close to that range while still staying wide enough -for my personal preferences. Additionally, a lean stylesheet eliminates *FOUC* -(flash‑of‑unstyled‑content) on slower networks, delivering a smoother -first‑paint experience. - -* Final Thoughts - -I am very pleased with the new theme and will see how it holds up to time. Based -on enabling short-term server logs to debug issues (before promptly wiping it to -the ether), I notice that most visitors to my site are via RSS anyway. Either -way, I hope you reach out if you have an opinion; I always enjoy hearing from -you. -#+date: <2025-10-03 Fri 4:23:00> -#+title: My Privacy Toolkit -#+description: Learn about the tools I use to keep my life private and data secure. -#+slug: privacy-toolkit - -* VPN - -I use a few different VPNs for different purposes. For general use, I use -[[https://mullvad.net/en][Mullvad]] due to its private account creation process, support for private payment -options, and rock solid consistency. This is by far the most stable and -high-speed VPN I have used over the last ~10 years. - -I also use [[https://njal.la/vpn/][Njalla]] whenever I need to use a service where Mullvad is blocked. I -have found that the Njalla IP I was provisioned is not blocked anywhere, so it's -useful for software that seemingly has blocked all major VPN providers. There is -no client, but they provide OpenVPN and Wireguard support. - -Finally, I use [[https://airvpn.org/][AirVPN]] on my server's torrent service due to its support for port -forwarding. I don't use it for any other purpose, but it works great with -Transmission via Docker. - -* DNS - -Using a VPN on every single device is not possible. For all of the other items -on my network (IoT, Apple TVs, etc.), I enforce [[https://nextdns.io/][NextDNS]] via the [[https://github.com/nextdns/nextdns/wiki/UnifiOS][UnifiOS script]] -they provide. This lets me control the DNS on my network, avoid the ISP's -default DNS, and enforce blocklists at a LAN level for my home network. - -* Data Removal - -I use [[https://www.easyoptouts.com/][Easy Opt Outs]] due to its low price of $20 per year. There are other -options that promise more utility, but I find that this service is adequate. -Using this has dramatically reduced the spammy, "<person> info here" results on -web searches. - -Regardless, it's a low price to pay to make sure public information is not used -against you and reduces the surface of information available via low-effort -searches. - -* Passwords - -I use [[https://bitwarden.com/][Bitwarden]] due to its use-friendly interface, which is important to the -people I share secrets with. Bitwarden allows for seamless username and password -generation, multi-device syncing via its own provided service, built-in password -strength and duplicate analysis, wide range of device support, and general UI -(after its recent UI refresh). - -If I were only keeping passwords for myself and didn't need to support -non-technical users, I would strongly prefer [[https://keepassxc.org/][KeePassXC]]. This would allow me to -use Syncthing or another personal syncing solution that would avoid a -centralized server that controls my passwords and authentication to access the -passwords. - -* MFA - -I use iOS, which is limited in options for great MFA apps. If you use Android, -just use [[https://getaegis.app/][Aegis]]. - -For iOS, I currently use [[https://bitwarden.com/products/authenticator/][Bitwarden Authenticator]], which is a different app from -Bitwarden. You can use this /without/ linking it to a Bitwarden account and use it -as a standalone app, if you're not a fan of storing your passwords and MFA -methods in the same location. If you don't care, you can just use the MFA fields -within Bitwarden itself. - -The other options on iOS really aren't worth discussing, so I'll leave it here. - -* Communications - -For private instant communications, I use [[https://signal.org/][Signal]]. This is currently the gold -standard for private direct messages. It is centralized, but it is very stable, -provides forward secrecy for messages, and has a proven track record of not -spilling data. - -If we talk about other communication channels, I usually opt for emails -encrypted with [[https://gnupg.org/][GPG (PGP)]]. This isn't the best solution, but it does provide a -trustworthy encryption method if you need to use email. - -I am not a fan of the current landscape of private messaging apps outside of -Signal (Matrix, Session, etc.), so I'll leave my thoughts here with Signal and -PGP. - -Want real privacy? Talk to someone in person when possible. - -* Browser Extensions -** Firefox (Desktop) - -[[https://ublockorigin.com/][uBlock Origin]] is a no-brainer. This add-on provides domain-level blocking for -resources, allowing you to block or allow specific domains, scripts, styles, and -more with a click. - -If you prefer to avoid mainstream websites and browse via alternative -front-ends, I suggest using [[https://libredirect.github.io/][LibRedirect]]. You can configure this add-on to -automatically redirect your requests to privacy-respecting alternatives. - -** Safari (iOS) - -Since uBlock Origin doesn't work on Safari, I opt for [[https://apps.apple.com/us/app/ublock-origin-lite/id6745342698?platform=iphone][uBlock Origin Lite]], which -is a decent alternative. - -Similar to LibRedirect, I use [[https://apps.apple.com/us/app/privacy-redirect/id1578144015][Privacy Redirect]] on iOS to redirect websites to -private alternative front-ends. - -* Payments - -If you're just trying to avoid your bank collecting and using information about -your purchases, you can try something like [[https://www.privacy.com/][Privacy.com]], which lets you mask the -purchase information from your bank. - -If you're paying in person, I vote for paying with cash. Withdraw a certain -amount per paycheck and use for all in-person payments, whenever possible. -#+date: <2025-10-06 Mon 13:11:00> -#+title: Playing Rocket League on macOS via CrossOver -#+description: Learn how to play Rocket League on macOS via CrossOver. -#+slug: rocket-league-macos - -#+caption: Rocket League on macOS -#+attr_html: :alt The Rocket League launch screen on macOS. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/launch.webp]] - -* Intro - -Rocket League isn’t natively supported on macOS, but you can run it using -CrossOver, a compatibility layer that lets Windows applications run on macOS. -This guide walks you through installing CrossOver, setting up the Epic Games -Store (or Steam), and getting Rocket League up and running. - -* Install CrossOver - -To start, we will install CrossOver with [[https://brew.sh][Homebrew]]. - -#+begin_src shell -brew install --cask crossover -#+end_src - -Once installed, launch CrossOver and select the Try Now button. CrossOver offers -a 14‑day free trial. After the trial, a full license costs $74 USD. - -* Set Up the Epic Games Store (or Steam) - -After opening CrossOver, click the Install button and install the Epic Games -Store (or Steam, if you have Rocket League on Steam). You will need to agree to -the installation prompts that pop up and it should install in just a couple -minutes. - -When the installer finishes, you’ll see a bottle (a sandboxed Windows -environment) like the one below: - -#+caption: Epic Games Store Bottle -#+attr_html: :alt The Epic Games Store bottle within CrossOver. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/bottle.webp]] - -You can now launch the Epic application. Epic will update itself and then -present the login screen: - -#+caption: Epic Updater -#+attr_html: :alt The progress bar for updating the Epic Games Store bottle. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/updater.webp]] - -#+caption: Epic Login -#+attr_html: :alt The Epic Login page. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/login.webp]] - -* Install Rocket League - -Sign in to your Epic account, locate Rocket League in your library, and click -Install. The download and installation process will complete shortly (depending -on your internet connection), and then you should be ready to play. - -* Play the Game - -Last but not least, launch the game from the Epic Games Store once you install -it. It may take a minute or two when launching for the first time. - -Take a look at the screenshots I was able to capture while playing on my M2 -MacBook Pro with a PS5 Dualsense Edge controller: - -#+caption: Main Menu -#+attr_html: :alt The Rocket Leageu main menu. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/menu.webp]] - -#+caption: In-Game -#+attr_html: :alt A screenshot of a replay within a Rocket League match. -[[https://img.cleberg.net/blog/20251006-rocket-league-macos/game.webp]] - -* Tips & Troubleshooting - -Overall, the controller support for my PS5 Dualsense Edge controller worked out -of the box and the performance was excellent. However, issues can happen and I -gathered some tips, in case they do. - -- *Game runs slowly*: In CrossOver, edit the bottle’s settings → Graphics → enable - “Use DirectX 11” and increase the allocated RAM. -- *Controller not detected*: Install the Windows driver for your controller inside - the bottle (e.g., Xbox 360 driver). -- *Epic Store won’t update*: Delete the EpicGamesLauncher cache folder inside the - bottle (C:\Users\<User>\AppData\Local\EpicGamesLauncher\Saved) and restart the - launcher. -- *Crashes on launch*: Ensure you have the latest macOS updates and that CrossOver - is up‑to‑date (check “Check for Updates” in the app menu). - -* Conclusion - -That's it! It's a simple process that allows you to try out Rocket League on -macOS for 14 and determine if you enjoy this solution enough to pay for it. - -If you know a way to do this for free without paying for CrossOver, please reach -out and let me know! I am hesitant to pay $74 simply to play Rocket League, but -we shall see. - -Happy boosting! -#+date: <2025-10-24 Fri 19:41:41> -#+title: Digital Garden -#+description: A post dedicated to digital gardens, an online space for personal knowledge management, creative exploration, and reflection. -#+slug: digital-garden - -* What's a Digital Garden? - -Before I start describing digital gardens, I want to show a couple examples that -are distinct enough to show how varied digital gardens are. - -The first is a website ([[https://avas.space][ava's space]]) and the second is a private collection of -notes, using [[https://www.orgroam.com/][org-roam]]. - -#+caption: avas.space -#+attr_html: :alt Ava's Space, a digital garden and website by Ava. -[[https://img.cleberg.net/blog/20251024-digital-garden/ava.webp]] - -#+caption: Org Roam -#+attr_html: :alt A screenshot of an org-roam digital garden and collection of note files. -[[https://img.cleberg.net/blog/20251024-digital-garden/orgroam.webp]] - -A digital garden is a personal space, just for you. It could serve any number of -purposes, which I'll get into later, but the key is that it serves a specific -purpose for yourself. - -The primary features of a digital garden, as opposed to a personal website or -blog, is that it is not inherently structured in a strict manner, it may follow -a free form structure, it may look like a work-in-progress wiki. - -At the end of the day, it defines a web page where any type of content exists -and the author takes time and care to prune it in a specific manner. - -* Historical Context - -A lot of people talk about [[https://www.eastgate.com/garden/Enter.html][Hypertext Gardens: Delightful Vistas]] by Mark -Bernstein as the first instance of this phrase on the internet. And while this -may be true, I want to take a step further back. - -Have you heard of a [[https://en.wikipedia.org/wiki/Memex][Memex]]? This hypothetical device was described in Vannevar -Bush's 1945 article "As We May Think". He envisioned a device that would be able -to store all of a person's information for them - books, records, and -communications. The person could then reference the Memex for any information -and be guided to the correct spot. Essentially, it would the 1940's version of a -mind mapping or personal knowledge system. - -From the Memex to Hypertext Gardens to mind maps to other knowledge management -systems, humans seem intent on constantly reinventing the art of information -organization. - -The modern web is the result of 30+ years of redesigning the web to streamline -information. However, in this refinement, we've lost the art and beauty of -personal websites where people would dump all of the information relevant to -themselves. - -Digital Gardens are a movement to bring these personal websites back and present -them in a personalized fashion. - -* Common Uses - -Before I get into /how/ to build a digital garden, I want to touch on the -potential uses. Everyone has their own reason for building a website and digital -gardens are no exception. - -You may want to build a digital garden for any number of reasons: - -- Knowledge management -- Creative exploration -- Collaborative learning -- Personal reflection -- Artistic expression -- Data hoarding -- Social interaction - -* How to Build Your Own Garden - -If you do want to create your own digital garden, you can get started with a few -easy steps: - -1. *Choose a platform*: You can host a website for free on platforms like GitHub - or use a more note-taking platform like Notion or Obsidian. -2. *Set Up the Structure*: Decide how you want to organize your content. Remember - the purpose of a digital garden! Plant all of the information you care about - and then work to prune and clean them up as they grow. -3. *Start with Your Interests*: A digital garden should reflect yourself. Find - your passions and start from there. -4. *Regular Updates*: A garden won't grow if you ignore it. Remember to check in - and think if you want to add more, prune things out, or move things around. -5. *Interlinking Ideas*: Like plants and ecosystems, a digital garden should link - together. You may use tags or links to connect items on your own site or - perhaps includes links or lists to other gardens you enjoy. - -By far the most important piece here is regular updates. You can always fix or -change things, but the garden won't grow if you don't contribute to it. - -* Additional Suggestions - -Digital gardens are such an easy way to manage your knowledge and unleash your -creativity. Instead of sticking to the usual blog format, you get a space where -your ideas can grow and change over time. Whether you want to document what -you’re learning, share thoughts with others, or just reflect on your journey, a -digital garden can be the perfect tool. - -I strongly encourage you to create your own today, even if it starts as private -notes instead of a website! Nothing is ever too small and the point of a garden -isn't to be perfect, but to be a place where you can experiment and have fun. -#+date: <2025-11-02 Sun 10:07:14> -#+title: Using aerc on macOS -#+description: Learn how I use aerc, a TUI email client, on macOS. -#+slug: aerc-macos - -#+caption: aerc-mail -#+attr_html: :alt An image of aerc with an email opened in the reader window. -https://img.cleberg.net/blog/20251102-aerc-macos/read.webp - -Shout-out to [[https://baty.net/posts/2025/10/using-aerc-for-email/][Jack Baty]] for inspiring me to write about my =aerc-mail= client -after chatting about it over email recently! - -* Overview - -[[https://aerc-mail.org/][aerc]] is a text user interface (TUI) email client with intuitive defaults, easy -setup, and hassle-free operations. This post will walk through my personal -configuration for aerc on macOS. - -* Installation - -Since I am on macOS, I opted to install aerc from Homebrew. There are build -options for additional modules if you build from source, but I am okay with the -default options. - -You can view the information about the package prior to installing it, if you -wish: - -#+begin_src sh -brew info aerc -#+end_src - -#+begin_src sh -==> aerc: stable 0.21.0 (bottled), HEAD -Email client that runs in your terminal -https://aerc-mail.org/ -Installed -/opt/homebrew/Cellar/aerc/0.21.0 (48 files, 23MB) * - Poured from bottle using the formulae.brew.sh API on 2025-10-05 at 19:51:31 -From: https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/a/aerc.rb -License: MIT -==> Dependencies -Build: go ✘, scdoc ✘ -Required: notmuch ✔ -==> Options ---HEAD - Install HEAD version -==> Downloading https://formulae.brew.sh/api/formula/aerc.json -==> Analytics -install: 136 (30 days), 560 (90 days), 1,772 (365 days) -install-on-request: 136 (30 days), 560 (90 days), 1,772 (365 days) -build-error: 3 (30 days) -#+end_src - -Once you confirm you want to install this package, run the following: - -#+begin_src sh -brew install aerc -#+end_src - -* First-Time Wizard - -When you run aerc for the first time, an IMAP & SMTP wizard will walk you -through a basic setup for your email account(s). - -On macOS, aerc will save your configuration files in the following location: -=~/Library/Preferences/aerc=. - -I tried to create a =~/.config/aerc= directory, but the Library directory above -took precedence. If you truly need to keep your files in =~/.config=, you could -probably symlink that to the Library location. However, I accepted my fate and -will just edit the files within the Library directory. - -* Configuration - -Once you have installed and setup aerc for the first time, you can configure the -client and account settings. - -As noted above, I will be working within the Library directory that aerc -defaults to when installed via brew. - -#+begin_src sh -cd ~/Library/Preferences/aerc -#+end_src - -This directory should contain the following files. You can open the -=accounts.conf= file to confirm it contains the information you input during the -wizard process. - -| File | Purpose | -|-----------------+-------------------------------------------------------------| -| =accounts.conf= | Contains account-specific settings for IMAP & SMTP accounts | -| =aerc.conf= | Contains program-wide settings | -| =binds.conf= | Contains key bindings for aerc | - -I'll share my personal configuration, which is close to the defaults that -existed at the time of writing this post. - -=accounts.conf= - -This is the information from the wizard. The only further customization I -provided is the default signature file to be appended to each message I compose. - -#+begin_src conf -[Personal] -source = imaps://hello%40cleberg.net:[email protected] -outgoing = smtps://hello%40cleberg.net:[email protected] -default = INBOX -from = Christian Cleberg <[email protected]> -copy-to = Sent -cache-headers = true -signature-file = /Users/cmc/Library/Preferences/aerc/sigs/default -#+end_src - -=sigs/default= - -Any content within this file will be appended to my messages, as noted above. - -#+begin_src text -Christian Cleberg <[email protected]> -GPG: 3917 973F B159 BBB8 6194 5385 69451A51 7AC0 CB37 -#+end_src - -=aerc.conf= - -This contains quite a few customizations for my preferences related to -downloads, encryption, mouse controls, editor, and message composition. - -#+begin_src conf -[general] -# Prefer downloads to be saved to the Downloads folder -default-save-path=~/Downloads -# Use GPG for PGP encryption -pgp-provider=gpg - -[ui] -# Enable mouse controls for scrolling, paging, etc. -mouse-enabled=true - -[statusline] -[viewer] -# Use emacs instead of vi -pager=/usr/local/bin/emacs_viewer - -[compose] -# Use emacs instead of vi -editor=emacs -# Add Cc as a default field to view each time I compose a message -header-layout=To|From,Cc,Subject -# Allow me to edit headers when composing (so I can customize From address) -edit-headers=true -# Warn me if I mentioned these words but don't attach a file -empty-subject-warning=true -no-attachment-warning=^[^>]*attach(ed|ment) - -[multipart-converters] - -[filters] -text/plain=colorize -text/calendar=calendar -message/delivery-status=colorize -message/rfc822=colorize -text/html=! html -.headers=colorize - -[openers] -[hooks] -[templates] -#+end_src - -#+begin_quote -*IMPORTANT*: If you use the =pager= option above that I'm using, you will need - to create the =emacs_viewer= file as well. -#+end_quote - -You can create the file following my process below, which will create an -executable in the location specified in my =aerc.conf= file. I put it in -=/usr/local/bin=, but you can put it anywhere as long as it exists in the file -path specific within your configuration file. - -#+begin_src sh -sudo nano /usr/local/bin/emacs_viewer -#+end_src - -Paste this inside the file: - -#+begin_src sh -#!/bin/bash -emacs -nw - < "$1" -#+end_src - -#+begin_src sh -sudo chmod +x /usr/local/bin/emacs_viewer -#+end_src - -=binds.conf= - -Finally, here are the key bindings. I did not change these, but I'm showing them -here in case you have an issue and want to see the defaults. - -#+begin_src conf -# Binds are of the form <key sequence> = <command to run> -# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>" -# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit -<C-p> = :prev-tab<Enter> -<C-PgUp> = :prev-tab<Enter> -<C-n> = :next-tab<Enter> -<C-PgDn> = :next-tab<Enter> -\[t = :prev-tab<Enter> -\]t = :next-tab<Enter> -<C-t> = :term<Enter> -? = :help keys<Enter> -<C-c> = :prompt 'Quit?' quit<Enter> -<C-q> = :prompt 'Quit?' quit<Enter> -<C-z> = :suspend<Enter> - -[messages] -q = :prompt 'Quit?' quit<Enter> - -j = :next<Enter> -<Down> = :next<Enter> -<C-d> = :next 50%<Enter> -<C-f> = :next 100%<Enter> -<PgDn> = :next 100%<Enter> - -k = :prev<Enter> -<Up> = :prev<Enter> -<C-u> = :prev 50%<Enter> -<C-b> = :prev 100%<Enter> -<PgUp> = :prev 100%<Enter> -g = :select 0<Enter> -G = :select -1<Enter> - -J = :next-folder<Enter> -<C-Down> = :next-folder<Enter> -K = :prev-folder<Enter> -<C-Up> = :prev-folder<Enter> -H = :collapse-folder<Enter> -<C-Left> = :collapse-folder<Enter> -L = :expand-folder<Enter> -<C-Right> = :expand-folder<Enter> - -v = :mark -t<Enter> -<Space> = :mark -t<Enter>:next<Enter> -V = :mark -v<Enter> - -T = :toggle-threads<Enter> -zc = :fold<Enter> -zo = :unfold<Enter> -za = :fold -t<Enter> -zM = :fold -a<Enter> -zR = :unfold -a<Enter> -<tab> = :fold -t<Enter> - -zz = :align center<Enter> -zt = :align top<Enter> -zb = :align bottom<Enter> - -<Enter> = :view<Enter> -d = :choose -o y 'Really delete this message' delete-message<Enter> -D = :delete<Enter> -a = :archive flat<Enter> -A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter> - -C = :compose<Enter> -m = :compose<Enter> - -b = :bounce<space> - -rr = :reply -a<Enter> -rq = :reply -aq<Enter> -Rr = :reply<Enter> -Rq = :reply -q<Enter> - -c = :cf<space> -$ = :term<space> -! = :term<space> -| = :pipe<space> - -/ = :search<space> -\ = :filter<space> -n = :next-result<Enter> -N = :prev-result<Enter> -<Esc> = :clear<Enter> - -s = :split<Enter> -S = :vsplit<Enter> - -pl = :patch list<Enter> -pa = :patch apply <Tab> -pd = :patch drop <Tab> -pb = :patch rebase<Enter> -pt = :patch term<Enter> -ps = :patch switch <Tab> - -[messages:folder=Drafts] -<Enter> = :recall<Enter> - -[view] -/ = :toggle-key-passthrough<Enter>/ -q = :close<Enter> -O = :open<Enter> -o = :open<Enter> -S = :save<space> -| = :pipe<space> -D = :delete<Enter> -A = :archive flat<Enter> - -<C-y> = :copy-link <space> -<C-l> = :open-link <space> - -f = :forward<Enter> -rr = :reply -a<Enter> -rq = :reply -aq<Enter> -Rr = :reply<Enter> -Rq = :reply -q<Enter> - -H = :toggle-headers<Enter> -<C-k> = :prev-part<Enter> -<C-Up> = :prev-part<Enter> -<C-j> = :next-part<Enter> -<C-Down> = :next-part<Enter> -J = :next<Enter> -<C-Right> = :next<Enter> -K = :prev<Enter> -<C-Left> = :prev<Enter> - -[view::passthrough] -$noinherit = true -$ex = <C-x> -<Esc> = :toggle-key-passthrough<Enter> - -[compose] -# Keybindings used when the embedded terminal is not selected in the compose -# view -$noinherit = true -$ex = <C-x> -$complete = <C-o> -<C-k> = :prev-field<Enter> -<C-Up> = :prev-field<Enter> -<C-j> = :next-field<Enter> -<C-Down> = :next-field<Enter> -<A-p> = :switch-account -p<Enter> -<C-Left> = :switch-account -p<Enter> -<A-n> = :switch-account -n<Enter> -<C-Right> = :switch-account -n<Enter> -<tab> = :next-field<Enter> -<backtab> = :prev-field<Enter> -<C-p> = :prev-tab<Enter> -<C-PgUp> = :prev-tab<Enter> -<C-n> = :next-tab<Enter> -<C-PgDn> = :next-tab<Enter> - -[compose::editor] -# Keybindings used when the embedded terminal is selected in the compose view -$noinherit = true -$ex = <C-x> -<C-k> = :prev-field<Enter> -<C-Up> = :prev-field<Enter> -<C-j> = :next-field<Enter> -<C-Down> = :next-field<Enter> -<C-p> = :prev-tab<Enter> -<C-PgUp> = :prev-tab<Enter> -<C-n> = :next-tab<Enter> -<C-PgDn> = :next-tab<Enter> - -[compose::review] -# Keybindings used when reviewing a message to be sent -# Inline comments are used as descriptions on the review screen -y = :send<Enter> # Send -n = :abort<Enter> # Abort (discard message, no confirmation) -s = :sign<Enter> # Toggle signing -x = :encrypt<Enter> # Toggle encryption to all recipients -v = :preview<Enter> # Preview message -p = :postpone<Enter> # Postpone -q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone -e = :edit<Enter> # Edit (body and headers) -a = :attach<space> # Add attachment -d = :detach<space> # Remove attachment - -[terminal] -$noinherit = true -$ex = <C-x> - -<C-p> = :prev-tab<Enter> -<C-n> = :next-tab<Enter> -<C-PgUp> = :prev-tab<Enter> -<C-PgDn> = :next-tab<Enter> -#+end_src - -* Operation - -Now that I have configured the program to my liking, I can run =aerc= in my -terminal and see my changes reflected! - -Personally, I keep aerc running in a terminal at all times, since it has the -operation to ring a bell when a new message arrives. - -#+caption: Notification -#+attr_html: :alt An image of the bell notification on macOS from aerc. -[[https://img.cleberg.net/blog/20251102-aerc-macos/notification.webp]] - -The mailbox views and composition screens are fairly standard, but it does a -great job at displaying information effectively. - -#+caption: Inbox -#+attr_html: :alt An image of the aerc inbox view. -[[https://img.cleberg.net/blog/20251102-aerc-macos/inbox.webp]] - -#+caption: Compose Message -#+attr_html: :alt An image of Emacs being used as the composition window for aerc. -[[https://img.cleberg.net/blog/20251102-aerc-macos/compose.webp]] - -#+caption: Send Message -#+attr_html: :alt An image of the aerc commands to send an email. -[[https://img.cleberg.net/blog/20251102-aerc-macos/send.webp]] - -#+caption: Read Message -#+attr_html: :alt An image of an email opened in aerc's reading window. -[[https://img.cleberg.net/blog/20251102-aerc-macos/read.webp]] - -All in all, I love aerc and far prefer it to my previous client (neomutt). In -certain cases, Thunderbird is more convenient, but I don't find myself opening -it at all lately. I will definitely update this post in the future if I find -anything extraordinary to add about aerc. -#+date: <2025-11-14 Fri 19:46:30> -#+title: Striving for 100% WCAG 2 Compliance -#+description: Read on to learn more about how I've ensured my humble site is compliant with WCAG 2. -#+slug: wcag - -* WCAG 2 - -What are the Web Content Accessibility Guidelines (WCAG) 2 requirements? - -While the full list of WCAG requirements may seem intimidating, it's actually -straightforward for a static site like =cleberg.net= if you are intentional -about design. Luckily, they offer a [[https://www.w3.org/WAI/WCAG22/quickref/][Quick Reference]] guide that is much easier to -parse than the full specification. - -So, while it wasn't onerous to push myself over the 100% threshold, I wanted to -write about how my current website design contributed to my compliance rate and -why WCAG is important. - -* Why WCAG? - -Before I dive into the specifics of how my website complies with these -requirements, I wanted to touch on the importance of WCAG itself. - -There are three major reasons I wanted to implement the WCAG requirements on my -website: - -1. *Usability*: The main reason, which I've covered in numerous other blog posts - about minimalism and design, is usability. I believe that our tech should - always serve a purpose and I believe that the design of a tool should - encapsulate that idea. Therefore, designing a website with intent leads to - better usability, both by those with and without disabilities. -2. *Kindness*: What's better than designing a tool accessible by /everyone/? - Personally, I love the idea that no matter who visits my website, they should - experience the same content and same utility intended by the website. -3. *Future-Proofing*: Technology, include internet tools, are changing - constantly. When a website is well-designed, reachable by all audiences, and - utilitarian, it will be able to last longer or even "decay gracefully". - -* Implementing WCAG On My Website - -Since I do not implement JavaScript, forms, or multimedia content on my website, -the list of items to implement was short. - -I'll go through some of the items that I considered during my manual -verification of the site. If an item is not on this list, it is either *not -applicable* or the native browser functionality covers the requirement and I do -not implement any custom element that would require verification. - -- [1.1]: Text alternatives for non-text content (i.e., images) - - For each image within my website, I made sure that alt-text was - available. -- [1.3.1]: Use Accessible Rich Internet Applications (ARIA) landmarks to - identify regions of a page - - ARIA landmarks are available for the navigation menu on my website, - which is the only element I use which is recommended by WCAG to have - an ARIA role. -- [1.3.1]: Use semantic HTML elements to identify regions of a page - - I have always used semantic HTML, but I reviewed my HTML templates to - ensure I had coverage. In short, I use elements like =<nav>=, - =<main>=, =<article>=, and =<footer>= instead of =<div>= elements. -- [1.4.1]: Use a color with a relative luminance difference of 3:1 or greater - - When choosing the color palettes for this site, I ensured that all - were at least AA compliant and in most cases, AAA compliant. -- [1.4.4]: Use em (or rem) units for font sizes - - All sizing on this site uses =rem= sizing. -- [2.4.1]: Create links to skip blocks of repeated material - - I created a =skip-to-content= link hidden at the top each web page - that allows keyboard or screen reader users to skip the navigation - block. -- [2.4.6]: Provide descriptive headings - - Each page contains hierarchical headers starting at =<h1>=. -- [3.1.1]: Use the language attribute on the HTML element - - Each pages is defined with =<html lang=en-us>=. -- [3.1.4]: Provide an expansion of an abbreviation on the first occurrence - - To the best of my ability, I have been reviewing all historical posts - on this site and expanding abbreviations upon first use. -- [3.2]: Make web pages appear and operate in predictable ways - - This, and many other requirements, are resolved by a combination of - (1) native browser functionality which works as expected since I am - using semantic HTML, and (2) my use of a structure outline and logical - content flow on each page of the site. - -* Results - -#+caption: IBM Equal Access Accessibility Checker -#+attr_html: :alt Results from the IBM Equal Access Accessibility Checker, showing 94% confirmed compliance, with the remaining manually confirmed. -[[https://img.cleberg.net/blog/20251113-wcag/accessibility_assessment.webp]] - -To confirm compliance, I chose /not/ to use one of the "free" accessibility -checker websites, since they often only test one page at a time, take a while to -run, and I just generally don't enjoy scanning my website with random services. - -Instead, I used the [[https://www.ibm.com/able/toolkit/tools/#develop][IBM Equal Access Accessibility Checker]] extension on Firefox. -This allowed me to scan each page I wanted, stored my scans, and provided -in-depth results with links to guidance and suggestions for fixing each issue. - -This was great as it showed me a handful of issues I hadn't caught previously. -However, the image above shows that my site is 94% compliant through *automated* -checks and I manually verified the remaining 6% of checks. - -I performed these scans for all top-level pages on my website (home, about, -blog, services, about, salary, and now), as well as the three latest blog posts -to confirm compliance. - -I'd love to test 100% of every page of my website one day and will continue to -strive to enhance my compliance with ARIA and WCAG. -#+date: <2025-11-23 17:43:57> -#+title: Practical Uses for AI in IT Audit -#+description: Learn how I'm currently using AI in my role in Technology Assurance (i.e., IT Audit) at KPMG. -#+slug: it-audit-ai - -* My AI Toolkit - -As others in the Big 4 will probably tell you, AI is a strategic tool that -allows for a far more efficient and impact audit. However, the key is -understanding when to use it, how to use it, and how to translate the output -from your AI into actions. - -This post will walk you through how I personally leverage AI in my role. - -Let's start by stepping through the tools I have at my disposal. - -** Gemini Enterprise (formerly Agentspace) - -First and foremost is [[https://cloud.google.com/gemini-enterprise][Gemini Enterprise]], which has a large context window, is -connected to the Enterprise's internal documentation and websites, and allows -for specialized use of custom agents, [[https://notebooklm.google/][NotebookLM]], and more. - -I use Gemini for a handful of specific use-cases, notably: - -1. NotebookLM notebooks for team-based usage. For example, you can build a - notebook for a specific client (using public and private information about - that client) and then chat with the data in the notebook, generate an audio - overview, and save documents, such as mind maps or study guides, for future - use. - - I love this because it provides a "run once and save" functionality, where - I can generate things like an audio overview or document, save it, and then - my team can reference it without re-running the prompt or even needing to - open the notebook, if they download it. -2. Custom Agents for customized personas that benefit from the private - information that Gemini has access to, such as internal SharePoint sites. - - For example, I have a custom agent designed to operate as an IT Audit - Assistant that can help you ask questions that can be answered by the - company's news, documentation sites, and more (e.g., "I'm testing logical - access for AWS and want to know if anyone has created a solution or - guidance for XYZ."). - -** Microsoft Copilot - -Likely the most common AI in use at company's today, due to its integration with -every Microsoft product, Copilot offers the best AI solution for productivity. -However, it's usage is likely also the most volatile due to the large gap in -skill sets between new-hires and senior employees. - -For associates and other early-career employees, I suggest that they use Copilot -to perform two primary tasks: - -1. Check their tone, such as making an email or messages more professionalism, - softer, or perhaps to analyze the conversation up to that point to understand - how to respond better. This is something that /should/ come naturally to - senior employees, but is often a learning curve for associates. -2. For written documentation, such as guides or presentations, use Copilot and - provide it with ample information on the goal of the documentation in order - for Copilot to suggest an outline, gaps in the writer's thinking, or areas - for further research before writing the document. The key here is to use - Copilot to improve your thinking and not to replace it. It shouldn't generate - the content for you, it should remove the tedium of creating boilerplate - structures or to design the structure of a document. - -** Clara AI - -[[https://kpmg.com/us/en/capabilities-services/audit-services/kpmg-clara.html][Clara AI]] is KPMG's audit-based AI platform, known as the "KPMG Clara Smart Audit -Platform". The major benefit to Clara AI is that it lives within a sandboxed -environment, running on white-labelled models, fine-tuned on firm-specific -methodologies, and built directly into KPMG's audit tools. - -As noted in KPMG's Clara AI page linked above, Clara AI is built directly into -the Clara audit platform in order to provide systematic risk assessments, drive -consistent and efficient audits by providing all audit teams with relevant -information for their audit, and connects to other tools (such as KPMG Client -Collaboration, where evidence is requested and provided). - -I *absolutely love this tool*, as it solves some of the bigger problems for -auditors at large firms: - -1. Connecting younger staff to the firm's guidance and regulatory material, - lowering the barrier to auditors trying to learn which pieces of regulation - apply and when they apply. -2. As you can imagine, the audit process for a firm of KPMG's size can be - complex at times and changes depending on the client, the client's industry, - the type of engagement, and more. Clara AI helps break down each of these - challenges and provide detailed, accurate guidance for auditors to learn - about their specific use-case without getting lost in irrelevant data. - -Clara AI does a lot more than I've written about here and I know teams are using -these features beyond what my teams do in Tech Assurance. You can read about -more features, such as automation, dynamic dashboards, and more on the product -page: [[https://kpmg.com/us/en/capabilities-services/audit-services/kpmg-clara.html][Clara AI]]. - -* Use Cases for Each Tool - -While this section won't be exhaustive, it provides a few basic examples of what -my teams do at KPMG with AI, as well as some suggestions for how other auditors -can utilize AI at their own companies. - -** Gemini -*** Client and Project-Based Agents or Notebooks - -As I mentioned above, one great use-case is to build notebooks for your client -team or even for internal teams, such as a team that's formed to increase -automation within the audit practice. - -I build notebooks for these teams, upload as many relevant documents and links -as I can, invite my team members, and then save useful artifacts within the -notebook so that my team members don't need to recreate the wheel in order to -gain access to that same information. - -*** Technical Research - -Through purely anecdotal experiences, I have found Gemini to be superior to my -other AI tools when it comes to technical topics. It provides more accurate -information and better context for my specific role. - -This has replaced the experience of walking team members through topics, such as -Snowflake architecture, AWS logical security, or SQL permissions. - -In addition, it helps me and others who are more experience dive deeper into -subjects that we historically did not have the time or knowledge to research. -For example, Gemini recently helped me use my knowledge of similar systems to -understand Kafka's architecture and risks as they related to my client's -specific implementation of Kafka. - -*** Data Analysis - -As I mentioned above, Gemini seems to excel with technical tasks. I've been -using this to enhance the data analysis we perform. - -For example, Gemini is able to help write queries (e.g., SQL or AWS commands) to -extract the information we need to test a control. While we have lots of -internal documentation for popular platforms, there are always situations where -you need data from a system and don't have any guidance to extract it. - -For users with data, Gemini is able to provide a more natural language querying -process where the user can simply describe what analysis they need, or even -generate a dashboard for the user. I find this most helpful in identifying -relevant metrics or analytics and then have our teams use their skills to build -out Alteryx workflows and Power BI dashboards to implement what Gemini has -helped them investigate. - -Lastly, data cleaning is wonderful in Gemini. Gemini is able to help structure, -clean and deduplicate data much faster than humans can and seems to have a lower -potential for errors than if someone manually combed through the data trying to -correct it. - -** Microsoft Copilot -*** Meeting Transcripts - -One of the built-in features of Copilot in Teams is [[https://support.microsoft.com/en-us/office/view-live-transcription-in-microsoft-teams-meetings-dc1a8f23-2e20-4684-885e-2152e06a4a8b][transcription]]. This is a -killer feature for auditors, as one of the biggest pain points for an audit (on -both sides) is having to meet multiple times to rehash the same topic or send -constant follow-ups throughout the year to re-confirm facts. - -With a transcript, we can spend one meeting going fully through all questions -and simply refer back to the transcript whenever we have a question. - -If you also save the video recording, you can also save the time of requesting -evidence later, as you already have a recording where you walked through the -evidence you needed. - -This saves: - -1. An absolute *ton* of time on both the audit and client sides, in terms of - questions and follow-ups. -2. Even *more* time by not needing the ask the client to take a million - screenshots. Instead, the auditor can take screenshots from the recording - after the fact. No more stopping every 5 seconds in a meeting waiting for - someone to take a screenshot or sending a request for screenshots after the - fact. - -*** Meeting Facilitator - -Another killer feature of Copilot is the [[https://learn.microsoft.com/en-us/microsoftteams/facilitator-teams][Facilitator]]. Facilitator takes the -agenda in the meeting invite (or determines the agenda throughout the meeting), -tracks progress of the discussion against the agenda, takes notes, and tracks -to-do items with assignments for users to take action after the end of the -meeting. - -*** Microsoft Office Integrations - -I talked about the Microsoft Office integrations above, so I won't dive deep in -this section. - -For auditors, some useful examples are: - -- Generating boilerplate for an audience you're not familiar with writing for - (e.g., engineers vs. CFOs). Note that you *shouldn't* generate the content, - you should only let Copilot guide you to the proper format and then use your - knowledge to write the content. -- Checking your tone, especially if Copilot has access to historical chats, in - order to help you respond professionally and appropriately. -- In Excel or Word, helping you analyze your data. - -I'm not a big fan of generating content with Copilot, so I don't have any -examples for that. Perhaps I am naive, but I still think we should be honing our -interpersonal skills and the content of our communications with others should -still be written by us, not AI. - -*** Managing Emails, Chats, and More - -I almost titled this section "Manager Mode", since I'm feeling a different level -of intensity from the sheer number of emails, Teams messages, tags in channels, -and more that I experience now as a Manager. - -One small but effective use for Copilot is to check at the end of the day if -you've missed anything that day, such as responding to an email or message, -actions items assigned to you in meetings, or important announcements that, -while not directed at you individually, may require action from you. - -I currently do not have access to Copilot Studio, but I'd love to build a custom -agent around this idea if I could. - -** Clara AI -*** Firm & Methodology Guidance - -For an auditor who has to deal with SOX, SOC 1-3, AUP, and more engagements, you -can imagine the sheer number of potential pitfalls there are when working -through an engagement. - -Being able to have Clara AI break down the regulatory requirements for your -specific situation is amazing. - -For example, how do you risk assess Client ABC, who has unique IT systems and -business processes, and operates in the oil & gas industry? What if they are -also impacted by the US's tariffs? Even further, what if they experienced a data -breach in the prior year and have experienced changes in numerous key roles? - -Clara AI is able to handle of this and more, guiding team members to the -relevant guidance and assisting them in the audit process. - -*** Workflow Assistance - -On top of the various regulations and internal guidance frameworks, auditors at -the Big 4 also have to learn how to use their firm's specific audit platforms. - -KPMG built the KPMG Clara Workflow (KCw) for audits and SOC reports, which -requires teams to fill out the audit file for their engagement, answer all -questions that appear, perform their testing, and abide by the required items. - -Clara AI helps by connecting auditors to the internal guidance that supports -each section of the audit platform so that they can complete their engagement in -compliance with their requirements. - -* A Day with AI - -Before I finish, I wanted to provide an example of how an auditor might utilize -AI throughout their day. You can probably summarize this already from the -information provided above, but I wanted to lay out in plain terms here at the -end: - -- Strategic planning in the morning with any AI. Review regulatory news, - summarize key decisions made by the government, industry leaders, and more. -- If you have a lot of emails and messages, use Copilot to summarize actions - items and make a prioritized plan of action. -- As you test or review items in the audit file, use Clara AI to identify gaps - in approach. -- During meetings, enable transcriptions and Facilitator. Use these tools so - that people attending the meeting don't need to take detailed notes. Instead, - each person can be fully invested in the topics they're discussing. -- Use Copilot to summarize and draft outlines for emails to the team and/or - client. - -** Conclusion -*** What /Can/ AI Do? - -AI /can/ increase efficiency, consistency, and audit quality, but there are some -big assumptions when we state that. We first need to make sure we, as auditors, -are using the tools themselves effectively. For an auditor, a general AI chat -won't be very useful. Instead, we should be training and using focused models -that solve specific purposes. The model will perform better if it's trained for -specific purpose and isn't expected to know everything that's ever existed. - -But what happens when we /do/ use AI effectively? Well, at that point, we are -able to elevate ourselves and automate the manual and tedious tasks that have -taken up time historically. - -Staff who may have been asked to spends hours cleaning data from the client -before can now spend a shorter length of time reviewing the data output instead -and then using that additional time to enhance their critical thinking. If you -are used to performing these manual tasks, think about what your seniors or -managers do with your results. Can you take on those tasks instead and elevate -yourself into those roles? - -*** The Role of the Human in an AI World - -Last, but not least, I want to *highly stress* the importance of human in the -loop (HITL) concept. What we do as auditors is strategically important, whether -you're an internal or external auditor, and cannot be replaced by the current -landscape of AI tools. Therefore, when we're using AI, we need to make sure we -validate *everything* coming out the tool. At no point can the AI take -responsibility, so we need to take responsibility for our actions when we use -AI. - -However, when we do all of this, we are able to elevate the role of the auditor -to one of judgment, critical thinking, validation, and client relationship -management. This means faster, higher quality, and more impactful audits -throughout the industry. -#+date: <2025-12-06 Sat 14:13:00> -#+title: Self-Hosting Guide: Tor Websites -#+description: Learn how to host your own website on Tor with an Onion Address in a few short steps! -#+slug: self-hosting-tor - -* Installation - -First, install the Tor package. I'm using Ubuntu, so I'll be using =apt= to -install Tor. - -#+begin_src sh -sudo apt install tor -#+end_src - -* Configuration - -** Tor -Next, let's configure the service we'll be serving via Tor. For this, edit the -file below and add the lines below to the end of the file. - -#+begin_src sh -sudo nano /etc/tor/torrc -#+end_src - -The following lines you add to the file will define the directory to use and the -internet protocol (IP) address and port we will be using. - -#+begin_src text -HiddenServiceDir /var/lib/tor/hidden_service/ -HiddenServicePort 80 127.0.0.1:5000 -#+end_src - -Next, you will need to =cat= the contents of the file below to find the onion -address provided to you. - -#+begin_src sh -sudo cat /var/lib/tor/hidden_service/hostname -#+end_src - -** Nginx - -With this onion address handy, create a file in your Nginx configuration -directory. Mine is =conf.d=, but yours may be =sites-available=. If that's the -case, don't forget to create a symbolic link from the file you created in -=sites-available= to =sites-enabled=. - -#+begin_src sh -sudo nano /etc/nginx/conf.d/tor-website.conf -#+end_src - -Within this Nginx configuration file, I will be using the file below. I have -left comments to explain each part. - -#+begin_src conf -server { - # The IP address and port Nginx will listen on - listen 127.0.0.1:80; - # The onion address to listen for - server_name sv3g2dlyvwyk2nvi3eeh55fcrpdvjlclhi6wwsx57cste6lwdjanzyyd.onion; - # The directory where your website files are - root /var/www/tor-website/; - - # By default, try to serve the files. Return 404 if a file is not found. - location / { - try_files $uri $uri/ =404; - } - - # Put any other configurations here at the end, such as redirects - # ... -} -#+end_src - -Finally, we can restart the services and check to see if it's working. - -#+begin_src sh -sudo systemctl restart nginx.service -sudo systemctl restart tor.service -#+end_src - -At this point, you should be able to view your Onion address in Tor. - -[[https://img.cleberg.net/blog/20251206-self-hosting-tor/onion.webp]] -#+caption: Onion Address in Tor - -** Onion-Location - -Lastly, let's advertise the =Onion-Location= on our clearnet website so that -users on Tor can automatically switch to the Onion address if they want to. - -#+begin_src sh -sudo nano /etc/nginx/conf.d/regular_website.conf -#+end_src - -#+begin_src conf -server { - server_name example.com; - add_header Onion-Location http://YourOnionAddress.onion$request_uri; -} -#+end_src - -Once complete, restart Nginx. - -#+begin_src sh -sudo systemctl restart nginx.service -#+end_src - -You should now see a big purple button in Tor titled =.onion available= when -visiting the clearnet web page. - -[[https://img.cleberg.net/blog/20251206-self-hosting-tor/clearnet.webp]] -#+caption: Onion-Location Button - -If everything worked, you're all done! You now have a website served via an -onion address on Tor and an Onion-Location header advertising your new onion -address. |